Rack Mounting Solutions
Showing 313–336 of 1884 results
-
Rack Mounting Solutions, Rack Accessories, Cable Managers, Hammond
Vertical Finger Cable Manager with Door FRCM Series – (FRCM44U128)
Rack Mounting Solutions, Rack Accessories, Cable Managers, HammondVertical Finger Cable Manager with Door FRCM Series – (FRCM44U128)
The vertical Fingered Rack Cable Manager (FRCM) from Hammond Mfg can be used for managing sensitive fiber, large bundles of network and coax cables combined into a structurally strong vertical cable manager. The double-hinged/reversible slam-latch door is simple to install and is visually pleasing.
Features:
- Sturdy T-shape steel high-density fingers are spaced at 2RU and provide support for large cable bundles and heavy gauge cables.
- Separated space easily allows for cables to be added or removed without fishing the cable.
- Includes clip-on plastic finger guards (ships loose) for 1.25in cable bend radius.
- The Slam-latch door is reversible and can be opened from either side or removed with ease.
- Includes mounting provisions for optional Cable Spools, dividers for slack management.
- Also includes mounting for up to eight (8) low-density rear management rings.
- Hardware included for securing to rack.
Specifications:
- The manager body is constructed of 16-gauge steel while manager door is constructed of 18-gauge steel.
- Compatible with Hammond DNRRHDW, DC4R, DRZ4, RB-2P and RB-2PA Series of open frame racks.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Looking for a double-sided manager? Check out the VFM Series.
Gallery
Accessories
SKU: FRCM44U128 -
Rack Mounting Solutions, Rack Accessories, Cable Managers, Hammond
Vertical Finger Cable Manager with Door FRCM Series – (FRCM44U812)
Rack Mounting Solutions, Rack Accessories, Cable Managers, HammondVertical Finger Cable Manager with Door FRCM Series – (FRCM44U812)
The vertical Fingered Rack Cable Manager (FRCM) from Hammond Mfg can be used for managing sensitive fiber, large bundles of network and coax cables combined into a structurally strong vertical cable manager. The double-hinged/reversible slam-latch door is simple to install and is visually pleasing.
Features:
- Sturdy T-shape steel high-density fingers are spaced at 2RU and provide support for large cable bundles and heavy gauge cables.
- Separated space easily allows for cables to be added or removed without fishing the cable.
- Includes clip-on plastic finger guards (ships loose) for 1.25in cable bend radius.
- The Slam-latch door is reversible and can be opened from either side or removed with ease.
- Includes mounting provisions for optional Cable Spools, dividers for slack management.
- Also includes mounting for up to eight (8) low-density rear management rings.
- Hardware included for securing to rack.
Specifications:
- The manager body is constructed of 16-gauge steel while manager door is constructed of 18-gauge steel.
- Compatible with Hammond DNRRHDW, DC4R, DRZ4, RB-2P and RB-2PA Series of open frame racks.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Looking for a double-sided manager? Check out the VFM Series.
Gallery
Accessories
SKU: FRCM44U812 -
Rack Mounting Solutions, Rack Accessories, Doors, Hammond
C2 Doors CDF Series – (C2DF1970PBK1)
Features
- Constructed in 16-gauge steel.
- Easily installs into C2 Series cabinets using integrated spring pin at top and bottom of the door.
- Includes formed plastic handle, quarter-turn lock and hinges to mount on the cabinet.
- Available in Solid, Windowed and Perforated and Split Perforated options.
- Finished in textured RAL9005 black or RAL7035 light gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Accessories
Door Adapter Kit
Cabinet Door Replacement Lock
Partial Height Door Support
SKU: C2DF1970PBK1 -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
Test & Measurement Rack Cabinet RCH Series – (RCHV1901731LG1)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondTest & Measurement Rack Cabinet RCH Series – (RCHV1901731LG1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: RCHV1901731LG1 -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
Test & Measurement Rack Cabinet RCH Series – (RCHV1901731BK1)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondTest & Measurement Rack Cabinet RCH Series – (RCHV1901731BK1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: RCHV1901731BK1 -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
IT, Security and A/V Rack Cabinet RCK Series – (RCKWD36UBK1)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondIT, Security and A/V Rack Cabinet RCK Series – (RCKWD36UBK1)
We designed our new RCK Cabinet series for your Homelab and Pro-AV applications. We’ve included loads of unique features such as bonus rack units, compatibility for standard hardware components, and more. Every RCK is self-squaring and takes just minutes to assemble. In addition, each cabinet has mounting points for our easy four-screw field-installable doors.
Features
- Available in six (6) heights and two (2) depths.
- Optional locking doors are constructed in 16-gauge steel. The door(s) install in minutes and are available in solid, vented, and tinted window.
- Doors include a locking swing handle compatible with electronic locking handles.
- The ready-to-assemble self-squaring cabinet body is constructed in 16-gauge steel and includes vents for optional fans on the cabinet sides.
- Includes two (2) pairs of adjustable depth 10-32 threaded EIA compliant rack rails.
- Both the top and bottom-rear of the cabinet feature a removable conduit knockout 1U panel. The top-rear can be used as a bonus 1U rack mounting point for equipment or rack accessories.
- The front of the cabinet includes at both top and bottom a steel plate. When removed reveals a Decora® compatible mounting point.
- Numerous cable tie-off points are included for front-to-rear cable management.
- Cabinet top includes solid top panel and conduit knockouts for additional cable entry.
- Cabinet base also includes mounting holes for optional casters or levelling feet.
- Both top and cabinet bottom includes an opening compatible with interchangeable “1923” sized top panels.
- Cabinet ganging kit included.
- Includes 50-pack of SCREW1032-50 screws.
Specifications
- Cabinet frame constructed in 16-gauge steel.
- Mounting rails constructed in 12-gauge steel.
- Top-Rear of cabinet included 3.00″, 2.50” and 2.0” knockouts for the conduit.
- Rear 1U panels include 1.375″, 1.125″ and 0.675″ knockouts.
- Include multiple bonding and grounding points.
- Load rated for up to 1,050 lbs (476 kg). Rolling caster load rated for up to 600 lbs (272 kg)
- Finished in textured RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Gallery
Accessories
SKU: RCKWD36UBK1 -
Rack Mounting Solutions, Rack Accessories, Doors, Hammond
C2 Doors CDF Series – (CDF1970VPLG1)
Features
- Constructed in 16-gauge steel.
- Easily installs into C2 Series cabinets using integrated spring pin at top and bottom of the door.
- Includes formed plastic handle, quarter-turn lock and hinges to mount on the cabinet.
- Available in Solid, Windowed and Perforated and Split Perforated options.
- Finished in textured RAL9005 black or RAL7035 light gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Accessories
Door Adapter Kit
Cabinet Door Replacement Lock
Partial Height Door Support
SKU: CDF1970VPLG1 -
Rack Mounting Solutions, Rack Accessories, Doors, Hammond
C2 Doors CDF Series – (CDF1970VPBK1)
Features
- Constructed in 16-gauge steel.
- Easily installs into C2 Series cabinets using integrated spring pin at top and bottom of the door.
- Includes formed plastic handle, quarter-turn lock and hinges to mount on the cabinet.
- Available in Solid, Windowed and Perforated and Split Perforated options.
- Finished in textured RAL9005 black or RAL7035 light gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Accessories
Door Adapter Kit
Cabinet Door Replacement Lock
Partial Height Door Support
SKU: CDF1970VPBK1 -
Rack Accessories, Equipment Cooling, Rack Mounting Solutions, Hammond
Rack Mount Fan Tray FT Series – (FT900HA1220BK)
Rack Accessories, Equipment Cooling, Rack Mounting Solutions, HammondRack Mount Fan Tray FT Series – (FT900HA1220BK)
Features
- Standard 19″ rack mount
- Compact and economical rack cooling solution.
- Fan trays can be positioned at the bottom of a rack to force air through the cabinet, at the top to exhaust air out or below specific pieces of equipment for spot cooling
- Choice of two operating voltages 115VAC (or 220VAC) – both 50/60 Hz., thermally protected, ball bearing fans
- Circuit breaker protected
- Low profile 1.75″ (1U) of panel space
- 115VAC versions include a 6′ 14/3 STJW cord with moulded 3 prong plug (NEMA 5-15P)
- 220VAC versions include an IEC input receptacle (IEC320-C14)
- Integral finger guards above and below fans
- Case width is 17″
- 6 and 9 fan units include an adjustable rear mounting bracket (mounts to rear panel rails) for extra stability
- Shipped fully assembled
- Available with or without on/off switch
- Finished in textured black powder paint
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Accessories
- Mounting Hardware
Power Cords
SKU: FT900HA1220BK -
Rack Mounting Solutions, Rack Accessories, Equipment Cooling, Hammond
Rack Mount Fan Tray FT Series – (FT900HA1BK)
Rack Mounting Solutions, Rack Accessories, Equipment Cooling, HammondRack Mount Fan Tray FT Series – (FT900HA1BK)
Features
- Standard 19″ rack mount
- Compact and economical rack cooling solution.
- Fan trays can be positioned at the bottom of a rack to force air through the cabinet, at the top to exhaust air out or below specific pieces of equipment for spot cooling
- Choice of two operating voltages 115VAC (or 220VAC) – both 50/60 Hz., thermally protected, ball bearing fans
- Circuit breaker protected
- Low profile 1.75″ (1U) of panel space
- 115VAC versions include a 6′ 14/3 STJW cord with moulded 3 prong plug (NEMA 5-15P)
- 220VAC versions include an IEC input receptacle (IEC320-C14)
- Integral finger guards above and below fans
- Case width is 17″
- 6 and 9 fan units include an adjustable rear mounting bracket (mounts to rear panel rails) for extra stability
- Shipped fully assembled
- Available with or without on/off switch
- Finished in textured black powder paint
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Accessories
- Mounting Hardware
Power Cords
SKU: FT900HA1BK -
Rack Mounting Solutions, Rack Accessories, Equipment Cooling, Hammond
Rack Mount Fan Tray FT Series – (FT900TA1220BK)
Rack Mounting Solutions, Rack Accessories, Equipment Cooling, HammondRack Mount Fan Tray FT Series – (FT900TA1220BK)
Features
- Standard 19″ rack mount
- Compact and economical rack cooling solution.
- Fan trays can be positioned at the bottom of a rack to force air through the cabinet, at the top to exhaust air out or below specific pieces of equipment for spot cooling
- Choice of two operating voltages 115VAC (or 220VAC) – both 50/60 Hz., thermally protected, ball bearing fans
- Circuit breaker protected
- Low profile 1.75″ (1U) of panel space
- 115VAC versions include a 6′ 14/3 STJW cord with moulded 3 prong plug (NEMA 5-15P)
- 220VAC versions include an IEC input receptacle (IEC320-C14)
- Integral finger guards above and below fans
- Case width is 17″
- 6 and 9 fan units include an adjustable rear mounting bracket (mounts to rear panel rails) for extra stability
- Shipped fully assembled
- Available with or without on/off switch
- Finished in textured black powder paint
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Accessories
- Mounting Hardware
Power Cords
SKU: FT900TA1220BK -
Rack Mounting Solutions, Rack Accessories, Equipment Cooling, Hammond
Rack Mount Fan Tray FT Series – (FT900TA1BK)
Rack Mounting Solutions, Rack Accessories, Equipment Cooling, HammondRack Mount Fan Tray FT Series – (FT900TA1BK)
Features
- Standard 19″ rack mount
- Compact and economical rack cooling solution.
- Fan trays can be positioned at the bottom of a rack to force air through the cabinet, at the top to exhaust air out or below specific pieces of equipment for spot cooling
- Choice of two operating voltages 115VAC (or 220VAC) – both 50/60 Hz., thermally protected, ball bearing fans
- Circuit breaker protected
- Low profile 1.75″ (1U) of panel space
- 115VAC versions include a 6′ 14/3 STJW cord with moulded 3 prong plug (NEMA 5-15P)
- 220VAC versions include an IEC input receptacle (IEC320-C14)
- Integral finger guards above and below fans
- Case width is 17″
- 6 and 9 fan units include an adjustable rear mounting bracket (mounts to rear panel rails) for extra stability
- Shipped fully assembled
- Available with or without on/off switch
- Finished in textured black powder paint
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Accessories
- Mounting Hardware
Power Cords
SKU: FT900TA1BK -
Rack Mounting Solutions, Rack Accessories, Doors, Hammond
C4 Doors C4DF Series – (C4BD2473VBK1)
Features
- Constructed in 16-gauge steel.
- Easily installs into C4 Series cabinets using integrated spring pin at top and bottom of the door.
- Hinged on left, swings from right to left.
- Need hinging on right? Order the C4RHINGE.
- Includes formed plastic handle, quarter-turn lock and hinges to mount on the cabinet.
- Available in Solid, Louvered, Perforated, Window and Vented Window options.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Accessories
Cabinet Door Replacement Lock
- Split Door Retrofit Kit
SKU: C4BD2473VBK1 -
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Cabinets, Hammond
Swing-Out Wall Mount and Floor Rack Cabinet HWF Series – (HWFWD3036UWH)
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Cabinets, HammondSwing-Out Wall Mount and Floor Rack Cabinet HWF Series – (HWFWD3036UWH)
Features
- Available in three (3) heights
- HWF mounts to the wall and sits on the floor supported by levelling feet. The swing-out section is supported by casters.
- Optional doors install in minutes and are available in a vented, tinted window and solid. Order part RHHK1 for right-hand hinge kit.
- The top of the rear section includes a “Bonus” 3U space for optional rack mount fans or accessory mounting.
- The main body can be installed to swing from left-to-right or right-to-left. Includes locking twist-latches.
- Includes one (1) pair of adjustable depth threaded 10-32 EIA compliant mounting rack rails.
- Thirty (30) inch wide mounting rails include “Bonus” 1U space for optional rack accessories, such as cable management or power bars.
- 10-32 tapped rails are easy to remove on-site and replace with square hole rails (sold separately) if needed.
- Includes starter pack of SCREW1032-50 screws and CLPKIT1032-25 clip nuts and screws.
Specifications
- Heavy-duty rear and base are constructed in 14-gauge welded steel.
- Optional locking doors are constructed in 16-gauge steel.
- Swing-out cabinet constructed in 16-gauge welded steel and features a spring-hinge pin for easy installation and removal.
- 2.50” and 2.00” conduit knockouts are located on the side.
- 4.00″, 2.00” conduit knockouts and BNC 0.625” knockouts are located on the top.
- Numerous cable management mounting points are included.
- Heavy-duty keyhole for wall mounting and levelling feet.
- Large openings in the rear for cable access designed for mounting over electrical receptacles.
- Dedicated bonding and grounding points that also provide drill-less mounting of electrical utility boxes. Ground Cable Kit sold separately.
- UL Listed 2416 load rated for up to 700 lbs (317 kg). Static Load tested to 2,800 lbs (1,270 kg).
- Finished in textured RAL9005 black or RAL9003 white powder paint.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements, when the door is installed.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: HWFWD3036UWH -
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Cabinets, Hammond
Swing-Out Wall Mount and Floor Rack Cabinet HWF Series – (HWFWD3036UBK)
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Cabinets, HammondSwing-Out Wall Mount and Floor Rack Cabinet HWF Series – (HWFWD3036UBK)
Features
- Available in three (3) heights
- HWF mounts to the wall and sits on the floor supported by levelling feet. The swing-out section is supported by casters.
- Optional doors install in minutes and are available in a vented, tinted window and solid. Order part RHHK1 for right-hand hinge kit.
- The top of the rear section includes a “Bonus” 3U space for optional rack mount fans or accessory mounting.
- The main body can be installed to swing from left-to-right or right-to-left. Includes locking twist-latches.
- Includes one (1) pair of adjustable depth threaded 10-32 EIA compliant mounting rack rails.
- Thirty (30) inch wide mounting rails include “Bonus” 1U space for optional rack accessories, such as cable management or power bars.
- 10-32 tapped rails are easy to remove on-site and replace with square hole rails (sold separately) if needed.
- Includes starter pack of SCREW1032-50 screws and CLPKIT1032-25 clip nuts and screws.
Specifications
- Heavy-duty rear and base are constructed in 14-gauge welded steel.
- Optional locking doors are constructed in 16-gauge steel.
- Swing-out cabinet constructed in 16-gauge welded steel and features a spring-hinge pin for easy installation and removal.
- 2.50” and 2.00” conduit knockouts are located on the side.
- 4.00″, 2.00” conduit knockouts and BNC 0.625” knockouts are located on the top.
- Numerous cable management mounting points are included.
- Heavy-duty keyhole for wall mounting and levelling feet.
- Large openings in the rear for cable access designed for mounting over electrical receptacles.
- Dedicated bonding and grounding points that also provide drill-less mounting of electrical utility boxes. Ground Cable Kit sold separately.
- UL Listed 2416 load rated for up to 700 lbs (317 kg). Static Load tested to 2,800 lbs (1,270 kg).
- Finished in textured RAL9005 black or RAL9003 white powder paint.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements, when the door is installed.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: HWFWD3036UBK -
Rack Mounting Solutions, Open Frame Racks, Knockdown Open Frame Racks, Hammond
4-Post Open Frame Rack DC4R Series – (DC4R24)
Rack Mounting Solutions, Open Frame Racks, Knockdown Open Frame Racks, Hammond4-Post Open Frame Rack DC4R Series – (DC4R24)
The Hammond DC4R Open Rack series is one of the most economical solutions to house IT equipment in wiring closets or data centers. In situations where the wiring closet itself is under lock and key and accessed by a limited number of people, full cabinets having locking doors and side panels may not be required resulting in a significant cost savings. If you’re building a Homelab the DC4R24 is ideal.
Standard Features:
- Available in 24U and 44U
- Two (2) pairs of 19” mounting EIA compliant square-hole rails.
- Ships with a 50-pack of screws and cage nuts CAGKIT1032-50.
- Includes marked rack unit dividers to aid in equipment mounting.
- For 44U height, add optional third or fourth pair of rails DC4RPR44 to provide additional adjustable mounting depths.
- Optional solid side panels gives you the look, feel and security of a welded cabinet.
- Four (4) pairs of integrated 10-32 ground studs, at both the front and rear of the rack. Stud pairs are conveniently spaced 5/8” apart and located across from each other inside the rail channel. For added convenience, two (2) pairs are located near the top of the rack, while the others are near the bottom of the rack.
- Rail depth L-bracket restrict the installer from over-extending the rack. This ensures the integrity of the rack.
- Self-squaring design for a short assembly time.
- One (1) set of two (2) horizontal cable manager bars. Additional cable manager bars available by ordering part number DC4RSHCM.
- Knockdown design ships unassembled for easy handling and shipping protection.
Specifications:
- Constructed of 12-gauge steel.
- Finished in smooth RAL9005 black powder paint.
- Suggested static load capacity of 2,000 lbs (907 kg).
- TAA compliant for GSA Schedule purchases.
- RoHS and REACH Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Looking for threaded holes? You can use any pair (2) of our RB-2P, RB-2PA, DNRRHDW or DRZ4 rack series; along with two (2) RAAB to create a cost-effective threaded 4-post rack.
Gallery
Accessories
High-Density Vertical Finger Manager with Slam-Latching Door
Vertical Finger Cable Manager with Door
Vertical Rack Cable Manager with Door
Vertical Cable Manager Extensions
Top Wire Management
Horizontal Ring Cable Manager
Horizontal Finger Cable Manager
Horizontal Hinged Cable Manager
Adjustable Depth Cable Manager
Rack Panels
Universal Rack Shelf
Adjustable Depth Shelf
Two Post Centered Shelf
Rackmount Adjustable Angle Bracket
Open Frame Rack and Rack Cabinet Joining Kit
Rack Isolation Kit
Grounding & Bonding
Mounting Screw and Cage Nut Combo-Pack
Bolt Down Kit
PDUs and Outlet Strips
SKU: DC4R24 -
Rack Accessories, Doors, Rack Mounting Solutions, Hammond
C4 Doors C4DF Series – (C4DF2477PBK1)
Features
- Constructed in 16-gauge steel.
- Easily installs into C4 Series cabinets using integrated spring pin at top and bottom of the door.
- Hinged on left, swings from right to left.
- Need hinging on right? Order the C4RHINGE.
- Includes formed plastic handle, quarter-turn lock and hinges to mount on the cabinet.
- Available in Solid, Louvered, Perforated, Window and Vented Window options.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Accessories
Cabinet Door Replacement Lock
- Split Door Retrofit Kit
SKU: C4DF2477PBK1 -
Rack Mounting Solutions, Rack Accessories, Rack Shelves, Hammond
Rack Mount Locking Storage Drawer RDRW Series – (RDRW1900712LG1)
Rack Mounting Solutions, Rack Accessories, Rack Shelves, HammondRack Mount Locking Storage Drawer RDRW Series – (RDRW1900712LG1)
Features
- Constructed of 14 and 16 gauge steel.
- Includes front plastic pull handle locking mechanism.
- Inside of drawer width is 16.12″ wide.
- Complete drawer with slides, hardware, lock & two keys.
- Available in 3 depths.
- Rear support brackets are included for all depths or can be supported from the rear rack rail.
- 6-Pack of 10-32 rack screws are included.
- Finished in textured powder paint.
- Tested to nearly double the suggested load rating of 145 lbs (66 kg) when mounted to two-pair/4-post rack rails.
- Rated for 60 lbs (27 kg) when mounted one-pair/2-post rack rails.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Note that the interior smooth white drawer has been discontinued. Moving forward the drawer will match the housing finish. This is a rolling change and available as new production is completed. New design also features a cable entry cutout in the rear of the drawer.
Accessories
Mounting Hardware
Wing Knob Latch
SKU: RDRW1900712LG1 -
Rack Mounting Solutions, Rack Accessories, Cable Managers, Hammond
Vertical Finger Cable Manager with Door FRCM Series – (FRCM44U88)
Rack Mounting Solutions, Rack Accessories, Cable Managers, HammondVertical Finger Cable Manager with Door FRCM Series – (FRCM44U88)
The vertical Fingered Rack Cable Manager (FRCM) from Hammond Mfg can be used for managing sensitive fiber, large bundles of network and coax cables combined into a structurally strong vertical cable manager. The double-hinged/reversible slam-latch door is simple to install and is visually pleasing.
Features:
- Sturdy T-shape steel high-density fingers are spaced at 2RU and provide support for large cable bundles and heavy gauge cables.
- Separated space easily allows for cables to be added or removed without fishing the cable.
- Includes clip-on plastic finger guards (ships loose) for 1.25in cable bend radius.
- The Slam-latch door is reversible and can be opened from either side or removed with ease.
- Includes mounting provisions for optional Cable Spools, dividers for slack management.
- Also includes mounting for up to eight (8) low-density rear management rings.
- Hardware included for securing to rack.
Specifications:
- The manager body is constructed of 16-gauge steel while manager door is constructed of 18-gauge steel.
- Compatible with Hammond DNRRHDW, DC4R, DRZ4, RB-2P and RB-2PA Series of open frame racks.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Looking for a double-sided manager? Check out the VFM Series.
Gallery
Accessories
SKU: FRCM44U88 -
Doors, Rack Mounting Solutions, Rack Accessories, Hammond
Locking Doors RSD Series – (RSDF19063LG1)
Features:
- 16-gauge steel construction.
- Mounts either right or left-hand hinge (door & cabinet are symmetrical).
- Includes installed lock and two keys.
- Includes mounting hardware.
- Finished in textured RAL9005 black or RAL7035 light gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Accessories
Cabinet Door Replacement Lock
SKU: RSDF19063LG1 -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
Test & Measurement Rack Cabinet RCH Series – (RCHV1901431LG1)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondTest & Measurement Rack Cabinet RCH Series – (RCHV1901431LG1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: RCHV1901431LG1 -
Unassembled, Rack Mounting Solutions, Server Racks and Cabinets, Hammond
Test & Measurement Rack Cabinet RCH Series – (RCHV1901431BK1)
Unassembled, Rack Mounting Solutions, Server Racks and Cabinets, HammondTest & Measurement Rack Cabinet RCH Series – (RCHV1901431BK1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: RCHV1901431BK1 -
Rack Mounting Solutions, Server Racks and Cabinets, Assembled, Hammond
Colocation/ Multi-Bay Server Rack Cabinet CLC Series – (CLCSP42BK)
Rack Mounting Solutions, Server Racks and Cabinets, Assembled, HammondColocation/ Multi-Bay Server Rack Cabinet CLC Series – (CLCSP42BK)
The co-location rack cabinet system from Hammond features four (4) different bay configurations and several roof options. Whether you are leasing the space or want to restrict access to sections of your cabinet, the Hammond CLC Series is loaded with innovative features.
Features
- Available in 44U mounting height.
- Available in 36”, 42” and 48″ depths.
- One single frame allows multiple bay configurations.
- Compatible with containment system and cable-trough accessories.
- Flush-mounted doors with locking swing handle.
- Side cable pass-thru knockouts.
- Optional solid side panels.
- One (1) interchangeable top panel.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- Square hole 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Where applicable, the divider shelves are constructed of reinforced 16-gauge steel.
- The shelves are designed to support the most robust of equipment such as tower servers.
- UL Listed 2416 load rated for up to 3,000 lbs (1,360 kg). Static Load tested to 12,000 lbs (5,443 kg).
- Grounding studs bonded to frame, side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
PCI DSS Compliance
The CLC series is PCI-Compliant when:
- Multiple cabinets are connected together and/or the open side is closed in using the appropriate side panel (listed in the accessory table below).
- The cable manager security plates CLCCMSP are installed.
- The cable manager security covers CLCCMSC are installed.
Included Components
- Welded steel frame with factory-installed nylon levelling feet, ground studs, and mounting points for optional casters.
- Two (2) pairs (Per bay) of adjustable depth EIA compliant square hole punched mounting rails.
- One (1) removable side panel (with 1/4 turn latches). An additional side panel is sold separately.
- Two (2) (Per bay) perforated front door (65% open area vented) with locking swing handle.
-
Vented bay divider shelf with rear removable panels for vertical PDU installation.
Note: Cabinet TOP panels are NOT included and are sold separately. (See table below)
Gallery
Accessories
SKU: CLCSP42BK