Rack Mounting Solutions
Showing 97–120 of 1884 results
-
Assembled, Rack Mounting Solutions, Server Racks and Cabinets, Hammond
Server Cabinet RB-DC Series – (RB-DC4242)
Assembled, Rack Mounting Solutions, Server Racks and Cabinets, HammondServer Cabinet RB-DC Series – (RB-DC4242)
Features
- Available in 24U and 42U mounting heights.
- Available in 42.74″ overall depth.
- Surface-mounted doors allow for full mounting depth utilization and include a locking swing handle.
- Included PDU cable trays for cable management and industry-standard vertical PDU installation.
- The top panel is easily removable for cable installation.
- Includes generous cable access with brushed cable entry.
- Includes fan venting compatible with FK fan kits.
- Includes three (3) 2U Rack panel cover panels.
- Ships with doors and rails fully assembled and ready for installation on-site. Side panels come packaged inside the cabinet for on-site installation.
- Built-in joining kit speeds up the baying of multiple RB-DC cabinets within a row.
Specifications
- Constructed in 16-gauge steel.
- Square hole mounting rails are constructed in 13-gauge steel, include rack unit indicators, and are powder coat finished.
- Rails easily adjust in-depth in 1/4″ increments.
- Tested to 2,300 lbs (1,043 kg) of equipment load. Rated for up to 660 lbs (299 kg) rolling caster load rating.
- Grounding studs bonded to frame, side panels and doors.
- Finished in textured black powder paint.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements.
- RoHS Compliant.
Included Components
- Steel frame with factory-installed levelling feet recessed casters and grounding studs.
- Two (2) pairs of adjustable depth EIA compliant square hole punched mounting rails.
- Starter pack of (50) M6 screws, cage nuts and washers included.
- One (1) perforated front door (63% open area vented) with locking swing handle.
-
One (1) perforated split/barn rear door (63% open area vented) with locking swing handle.
- Two (2) pairs of solid, split, locking and removable side panels.
- One (1) removable vented top panel with (6) hinged cable entry points.
- Two (2) PDU cable trays are mounted in the rear.
Part of the Rack Basics® line of economy rack solutions.
Need a Solid Top Panel? The RB-DCST42 42 inch deep solid top is now available.
Accessories
Rack Panels
Horizontal Ring Cable Manager
Horizontal Finger Cable Manager
Horizontal Hinged Cable Manager
Horizontal Lacing Strip
Adjustable Depth Shelf
Universal Rack Shelf
Four Post Mounting Sliding Shelf
Sliding Keyboard Shelf
Rack Mount Locking Storage Drawer
Rack Mount Fan Tray
Fan Panel Assembly
Grounding Kits
Mounting Hardware
PDUs and Outlet Strips
Compact LED Light Kit
SKU: RB-DC4242 -
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Cabinets, Hammond
Swing-Out Wall Mount and Floor Rack Cabinet HWF Series – (HWF3042U36WH)
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Cabinets, HammondSwing-Out Wall Mount and Floor Rack Cabinet HWF Series – (HWF3042U36WH)
Features
- Available in three (3) heights
- HWF mounts to the wall and sits on the floor supported by levelling feet. The swing-out section is supported by casters.
- Optional doors install in minutes and are available in a vented, tinted window and solid. Order part RHHK1 for right-hand hinge kit.
- The top of the rear section includes a “Bonus” 3U space for optional rack mount fans or accessory mounting.
- The main body can be installed to swing from left-to-right or right-to-left. Includes locking twist-latches.
- Includes one (1) pair of adjustable depth threaded 10-32 EIA compliant mounting rack rails.
- Thirty (30) inch wide mounting rails include “Bonus” 1U space for optional rack accessories, such as cable management or power bars.
- 10-32 tapped rails are easy to remove on-site and replace with square hole rails (sold separately) if needed.
- Includes starter pack of SCREW1032-50 screws and CLPKIT1032-25 clip nuts and screws.
Specifications
- Heavy-duty rear and base are constructed in 14-gauge welded steel.
- Optional locking doors are constructed in 16-gauge steel.
- Swing-out cabinet constructed in 16-gauge welded steel and features a spring-hinge pin for easy installation and removal.
- 2.50” and 2.00” conduit knockouts are located on the side.
- 4.00″, 2.00” conduit knockouts and BNC 0.625” knockouts are located on the top.
- Numerous cable management mounting points are included.
- Heavy-duty keyhole for wall mounting and levelling feet.
- Large openings in the rear for cable access designed for mounting over electrical receptacles.
- Dedicated bonding and grounding points that also provide drill-less mounting of electrical utility boxes. Ground Cable Kit sold separately.
- UL Listed 2416 load rated for up to 700 lbs (317 kg). Static Load tested to 2,800 lbs (1,270 kg).
- Finished in textured RAL9005 black or RAL9003 white powder paint.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements, when the door is installed.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: HWF3042U36WH -
Server Racks and Cabinets, Assembled, Rack Mounting Solutions, Hammond
Audio-Visual Cabinet RB-AV Series – (RB-AV42)
Server Racks and Cabinets, Assembled, Rack Mounting Solutions, HammondAudio-Visual Cabinet RB-AV Series – (RB-AV42)
Due to supply chain delivery issues, this product is not available. There is no ETA for stock replenishment.
Please consider the RCK Series as an alternative.
The RB-AV Series is a cost-effective rack cabinet that is ideal for A/V and Security applications. Fully assembled, the RB-AV Series includes removable factory-installed shelves, filler panels, casters, levelling feet and tapped 10-32 mounting rails.
Features
- Available in 18U, 27U, and 42U mounting heights.
- Available in 23.62″ overall width and depth.
- Passive cooling vents are located on the top, bottom and sides.
- Includes provision for up to two (2) optional fans on the top panel.
- Ships fully assembled and ready for installation on-site.
- Doors can be flipped to hinge from the opposite side.
Specifications
- Constructed in 16-gauge steel.
- Drilled and 10-32 tapped flange 19″ mounting rails are constructed in 13-gauge steel, and are powder coat finished.
- Rails easily adjust in-depth in 1/4″ increments.
- Tested to 950 lbs (431 kg) of equipment load.
- Grounding studs bonded to frame, side panels and doors.
- Finished in smooth black powder paint.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements.
- RoHS Compliant.
Included Components
- Steel frame with factory-installed levelling feet recessed casters and grounding studs. Casters and levelling feet are removable.
- Two (2) pairs of adjustable depth EIA compliant 10-32 tapped mounting rails.
- Starter pack of (50) 10-32 screws included.
- One (1) lightly smoked tempered glass front door with a quarter-turn lock.
- One (1) solid steel rear door with a quarter-turn lock.
-
Two (2) solid removable side panels with quarter-turn lock.
-
Removable cable access panels on cabinet top and bottom.
-
Includes factory-installed vented rack shelves and filler/blank panels (see table below for quantity).
Part of the Rack Basics® line of economy rack solutions.
Gallery
Accessories
SKU: RB-AV42 -
Rack Mounting Solutions, Rack Accessories, Cable Managers, Hammond
High-Density Vertical Finger Manager with Slam-Latching Door VFM Series – (VFMFP8WH)
Rack Mounting Solutions, Rack Accessories, Cable Managers, HammondHigh-Density Vertical Finger Manager with Slam-Latching Door VFM Series – (VFMFP8WH)
Features
- Sturdy, reversible steel slam-latch door/cover with pinch-trigger handle included.
- Available in 6”, 8”, 10” or 12” widths.
- Metal finger features sturdy T-shape steel fingers are spaced at 2RU and provide support for high-density cable bundles and heavy gauge cables. Includes clip-on plastic finger guards (shipped loose) for cable 1.25” bend radius.
- Includes cable mounting lances for hook and loop cable organization.
- Compatible with Hammond DNRRHDW, DC4R, DRZ4, RB-2P and RB-2PA Series of open frame racks.
- Use the optional riser base VFMB2BK for easier installation and manager support.
- We strongly recommend you use our rack bolt-down kit when mounting large cable managers.
- Optional inner and side panel, spool and cable divider accessories available.
- Finished in a textured black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Gallery
Accessories
SKU: VFMFP8WH -
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Cabinets, Hammond
Swing-Out Wall Mount and Floor Rack Cabinet HWF Series – (HWF3036U36BK)
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Cabinets, HammondSwing-Out Wall Mount and Floor Rack Cabinet HWF Series – (HWF3036U36BK)
Features
- Available in three (3) heights
- HWF mounts to the wall and sits on the floor supported by levelling feet. The swing-out section is supported by casters.
- Optional doors install in minutes and are available in a vented, tinted window and solid. Order part RHHK1 for right-hand hinge kit.
- The top of the rear section includes a “Bonus” 3U space for optional rack mount fans or accessory mounting.
- The main body can be installed to swing from left-to-right or right-to-left. Includes locking twist-latches.
- Includes one (1) pair of adjustable depth threaded 10-32 EIA compliant mounting rack rails.
- Thirty (30) inch wide mounting rails include “Bonus” 1U space for optional rack accessories, such as cable management or power bars.
- 10-32 tapped rails are easy to remove on-site and replace with square hole rails (sold separately) if needed.
- Includes starter pack of SCREW1032-50 screws and CLPKIT1032-25 clip nuts and screws.
Specifications
- Heavy-duty rear and base are constructed in 14-gauge welded steel.
- Optional locking doors are constructed in 16-gauge steel.
- Swing-out cabinet constructed in 16-gauge welded steel and features a spring-hinge pin for easy installation and removal.
- 2.50” and 2.00” conduit knockouts are located on the side.
- 4.00″, 2.00” conduit knockouts and BNC 0.625” knockouts are located on the top.
- Numerous cable management mounting points are included.
- Heavy-duty keyhole for wall mounting and levelling feet.
- Large openings in the rear for cable access designed for mounting over electrical receptacles.
- Dedicated bonding and grounding points that also provide drill-less mounting of electrical utility boxes. Ground Cable Kit sold separately.
- UL Listed 2416 load rated for up to 700 lbs (317 kg). Static Load tested to 2,800 lbs (1,270 kg).
- Finished in textured RAL9005 black or RAL9003 white powder paint.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements, when the door is installed.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: HWF3036U36BK -
Wall Mount Cabinets, Rack Mounting Solutions, Wall Mount Racks and Cabinets, Hammond
Swing-Out Sectional Wall Mount Rack Cabinet HWC Series – (HWC3012UTR)
Wall Mount Cabinets, Rack Mounting Solutions, Wall Mount Racks and Cabinets, HammondSwing-Out Sectional Wall Mount Rack Cabinet HWC Series – (HWC3012UTR)
Looking for a dust-tight cabinet? Add a solid or window door along with the HWCF Cabinet Sealing and Filter Kit.
Features
- Available in three (3) heights, two (2) widths and two (2) depths.
- Optional locking doors are constructed in 16-gauge steel. The door installs in minutes and is available in the vented, tinted window and solid options.
- The main body is constructed in 16-gauge welded steel and includes four (4) vents for optional fans on the sides of the cabinet.
- The main body can be installed to swing from left-to-right or right-to-left.
- Includes one (1) pair of adjustable depth 10-32 tapped EIA compliant mounting rack rails.
- Thirty (30) inch wide mounting rails include cutouts for optional 1U 19″ accessories, such as cable management or power bars.
- 10-32 tapped rails are easy to remove on-site and replace with square hole rails (sold separately) if needed.
- Includes starter pack of SCREW1032-50 screws.
Rear Section Features
- The heavy-duty rear bracket is constructed in 14-gauge welded steel and features a spring-hinge pin for easy installation and removal.
- 2.50” and 2.00” conduit knockouts are located on the side.
- 3.00″, 2.00”, 1.38” and 1.12” conduit knockouts are located on the top and bottom.
- Fan knockouts/cable access is located on the top and bottom.
- Numerous cable management mounting points are included.
- Heavy-duty keyhole for wall mounting.
- Large openings in the rear for cable access.
- Dedicated bonding and grounding points that also provide drill-less mounting of electrical utility boxes. Ground Cable Kit sold separately.
Specifications
- UL Listed 2416 load rated for up to 350 lbs (158 kg). Static Load tested to 1,400 lbs (635 kg).
- Rugged sand-textured black powder paint reduces fingerprints and marks.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements, when the door is installed.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Gallery
Accessories
SKU: HWC3012UTR -
Rack Mounting Solutions, Server Racks and Cabinets, Hammond
Test & Measurement Rack Cabinet C2RR Series – (C2RR197831LG1)
Rack Mounting Solutions, Server Racks and Cabinets, HammondTest & Measurement Rack Cabinet C2RR Series – (C2RR197831LG1)
Features
- Available in 24U, 36U, 40U and 45U mounting heights.
- Available in 23” overall width (19″ mounting width).
- Available in 23.62″ and 31.5″ overall depths.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Flush-mounted doors with quarter-turn lock.
- Solid side panels.
- One (1) interchangeable top panel.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- Drilled and 10-32 tapped flange 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Load rated for up to 1,500 lbs (680 kg).
- Grounding studs are provided on the frame as well as side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Included Components
- All configurations include:
- Welded steel frame with factory-installed nylon levelling feet, ground studs, and mounting points for optional casters.
- Two (2) pairs of adjustable depth EIA compliant 10-32 tapped flange mounting rails.
- Starter pack of SCREW1032-25 screws.
- Two (2) removable side panels (with 1/4 turn latches).
- C2RR Series Specific Components Include:
- One (1) solid locking door (Can be used as either front or rear door)
- One (1) solid top panel
- C2RR “D” Series Specific Components include (Replaced by C4RR):
-
One (1) locking front window door
-
One (1) locking rear louvred door
-
One (1) vented top panel with four (4) 3.5″ (89 mm) diameter cable access holes with covers
-
Are you looking for the CAK for wider legacy-wide C2 cabinets? Click here.
Accessories
Cabinet Baying/Ganging/Joining Kit
C2 Doors
Cabinet Top Panels
Door Adapter Kit
Side Panel Locking Kit
Cabinet Door Replacement Lock
Rack Shelves
Rack Mount Locking Storage Drawer
Vertical Cable Manager with Door
Vertical Cable Tray
Cable Lacing Bar
Horizontal Lacing Strip
Horizontal Hinged Cable Manager
Horizontal Ring Cable Manager
Cable Management Arm
Power Distribution Units (PDUs)
Mounting Hardware
Grounding & Bonding
Rack Panels
Cabinet Caster Set
SKU: C2RR197831LG1 -
Rack Mounting Solutions, Server Racks and Cabinets, Hammond
Test & Measurement Rack Cabinet C2RR Series – (C2RR197831BK1)
Rack Mounting Solutions, Server Racks and Cabinets, HammondTest & Measurement Rack Cabinet C2RR Series – (C2RR197831BK1)
Features
- Available in 24U, 36U, 40U and 45U mounting heights.
- Available in 23” overall width (19″ mounting width).
- Available in 23.62″ and 31.5″ overall depths.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Flush-mounted doors with quarter-turn lock.
- Solid side panels.
- One (1) interchangeable top panel.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- Drilled and 10-32 tapped flange 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Load rated for up to 1,500 lbs (680 kg).
- Grounding studs are provided on the frame as well as side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Included Components
- All configurations include:
- Welded steel frame with factory-installed nylon levelling feet, ground studs, and mounting points for optional casters.
- Two (2) pairs of adjustable depth EIA compliant 10-32 tapped flange mounting rails.
- Starter pack of SCREW1032-25 screws.
- Two (2) removable side panels (with 1/4 turn latches).
- C2RR Series Specific Components Include:
- One (1) solid locking door (Can be used as either front or rear door)
- One (1) solid top panel
- C2RR “D” Series Specific Components include (Replaced by C4RR):
-
One (1) locking front window door
-
One (1) locking rear louvred door
-
One (1) vented top panel with four (4) 3.5″ (89 mm) diameter cable access holes with covers
-
Are you looking for the CAK for wider legacy-wide C2 cabinets? Click here.
Accessories
Cabinet Baying/Ganging/Joining Kit
C2 Doors
Cabinet Top Panels
Door Adapter Kit
Side Panel Locking Kit
Cabinet Door Replacement Lock
Rack Shelves
Rack Mount Locking Storage Drawer
Vertical Cable Manager with Door
Vertical Cable Tray
Cable Lacing Bar
Horizontal Lacing Strip
Horizontal Hinged Cable Manager
Horizontal Ring Cable Manager
Cable Management Arm
Power Distribution Units (PDUs)
Mounting Hardware
Grounding & Bonding
Rack Panels
Cabinet Caster Set
SKU: C2RR197831BK1 -
Rack Mounting Solutions, Server Racks and Cabinets, Assembled, Hammond
Server Cabinet RB-DC Series – (RB-DC2442)
Rack Mounting Solutions, Server Racks and Cabinets, Assembled, HammondServer Cabinet RB-DC Series – (RB-DC2442)
Features
- Available in 24U and 42U mounting heights.
- Available in 42.74″ overall depth.
- Surface-mounted doors allow for full mounting depth utilization and include a locking swing handle.
- Included PDU cable trays for cable management and industry-standard vertical PDU installation.
- The top panel is easily removable for cable installation.
- Includes generous cable access with brushed cable entry.
- Includes fan venting compatible with FK fan kits.
- Includes three (3) 2U Rack panel cover panels.
- Ships with doors and rails fully assembled and ready for installation on-site. Side panels come packaged inside the cabinet for on-site installation.
- Built-in joining kit speeds up the baying of multiple RB-DC cabinets within a row.
Specifications
- Constructed in 16-gauge steel.
- Square hole mounting rails are constructed in 13-gauge steel, include rack unit indicators, and are powder coat finished.
- Rails easily adjust in-depth in 1/4″ increments.
- Tested to 2,300 lbs (1,043 kg) of equipment load. Rated for up to 660 lbs (299 kg) rolling caster load rating.
- Grounding studs bonded to frame, side panels and doors.
- Finished in textured black powder paint.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements.
- RoHS Compliant.
Included Components
- Steel frame with factory-installed levelling feet recessed casters and grounding studs.
- Two (2) pairs of adjustable depth EIA compliant square hole punched mounting rails.
- Starter pack of (50) M6 screws, cage nuts and washers included.
- One (1) perforated front door (63% open area vented) with locking swing handle.
-
One (1) perforated split/barn rear door (63% open area vented) with locking swing handle.
- Two (2) pairs of solid, split, locking and removable side panels.
- One (1) removable vented top panel with (6) hinged cable entry points.
- Two (2) PDU cable trays are mounted in the rear.
Part of the Rack Basics® line of economy rack solutions.
Need a Solid Top Panel? The RB-DCST42 42 inch deep solid top is now available.
Accessories
Rack Panels
Horizontal Ring Cable Manager
Horizontal Finger Cable Manager
Horizontal Hinged Cable Manager
Horizontal Lacing Strip
Adjustable Depth Shelf
Universal Rack Shelf
Four Post Mounting Sliding Shelf
Sliding Keyboard Shelf
Rack Mount Locking Storage Drawer
Rack Mount Fan Tray
Fan Panel Assembly
Grounding Kits
Mounting Hardware
PDUs and Outlet Strips
Compact LED Light Kit
SKU: RB-DC2442 -
Rack Mounting Solutions, Server Racks and Cabinets, Hammond
Test & Measurement Rack Cabinet C2RR Series – (C2RR197823LG1)
Rack Mounting Solutions, Server Racks and Cabinets, HammondTest & Measurement Rack Cabinet C2RR Series – (C2RR197823LG1)
Features
- Available in 24U, 36U, 40U and 45U mounting heights.
- Available in 23” overall width (19″ mounting width).
- Available in 23.62″ and 31.5″ overall depths.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Flush-mounted doors with quarter-turn lock.
- Solid side panels.
- One (1) interchangeable top panel.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- Drilled and 10-32 tapped flange 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Load rated for up to 1,500 lbs (680 kg).
- Grounding studs are provided on the frame as well as side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Included Components
- All configurations include:
- Welded steel frame with factory-installed nylon levelling feet, ground studs, and mounting points for optional casters.
- Two (2) pairs of adjustable depth EIA compliant 10-32 tapped flange mounting rails.
- Starter pack of SCREW1032-25 screws.
- Two (2) removable side panels (with 1/4 turn latches).
- C2RR Series Specific Components Include:
- One (1) solid locking door (Can be used as either front or rear door)
- One (1) solid top panel
- C2RR “D” Series Specific Components include (Replaced by C4RR):
-
One (1) locking front window door
-
One (1) locking rear louvred door
-
One (1) vented top panel with four (4) 3.5″ (89 mm) diameter cable access holes with covers
-
Are you looking for the CAK for wider legacy-wide C2 cabinets? Click here.
Accessories
Cabinet Baying/Ganging/Joining Kit
C2 Doors
Cabinet Top Panels
Door Adapter Kit
Side Panel Locking Kit
Cabinet Door Replacement Lock
Rack Shelves
Rack Mount Locking Storage Drawer
Vertical Cable Manager with Door
Vertical Cable Tray
Cable Lacing Bar
Horizontal Lacing Strip
Horizontal Hinged Cable Manager
Horizontal Ring Cable Manager
Cable Management Arm
Power Distribution Units (PDUs)
Mounting Hardware
Grounding & Bonding
Rack Panels
Cabinet Caster Set
SKU: C2RR197823LG1 -
Rack Mounting Solutions, Server Racks and Cabinets, Hammond
Test & Measurement Rack Cabinet C2RR Series – (C2RR197031LG1)
Rack Mounting Solutions, Server Racks and Cabinets, HammondTest & Measurement Rack Cabinet C2RR Series – (C2RR197031LG1)
Features
- Available in 24U, 36U, 40U and 45U mounting heights.
- Available in 23” overall width (19″ mounting width).
- Available in 23.62″ and 31.5″ overall depths.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Flush-mounted doors with quarter-turn lock.
- Solid side panels.
- One (1) interchangeable top panel.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- Drilled and 10-32 tapped flange 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Load rated for up to 1,500 lbs (680 kg).
- Grounding studs are provided on the frame as well as side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Included Components
- All configurations include:
- Welded steel frame with factory-installed nylon levelling feet, ground studs, and mounting points for optional casters.
- Two (2) pairs of adjustable depth EIA compliant 10-32 tapped flange mounting rails.
- Starter pack of SCREW1032-25 screws.
- Two (2) removable side panels (with 1/4 turn latches).
- C2RR Series Specific Components Include:
- One (1) solid locking door (Can be used as either front or rear door)
- One (1) solid top panel
- C2RR “D” Series Specific Components include (Replaced by C4RR):
-
One (1) locking front window door
-
One (1) locking rear louvred door
-
One (1) vented top panel with four (4) 3.5″ (89 mm) diameter cable access holes with covers
-
Are you looking for the CAK for wider legacy-wide C2 cabinets? Click here.
Accessories
Cabinet Baying/Ganging/Joining Kit
C2 Doors
Cabinet Top Panels
Door Adapter Kit
Side Panel Locking Kit
Cabinet Door Replacement Lock
Rack Shelves
Rack Mount Locking Storage Drawer
Vertical Cable Manager with Door
Vertical Cable Tray
Cable Lacing Bar
Horizontal Lacing Strip
Horizontal Hinged Cable Manager
Horizontal Ring Cable Manager
Cable Management Arm
Power Distribution Units (PDUs)
Mounting Hardware
Grounding & Bonding
Rack Panels
Cabinet Caster Set
SKU: C2RR197031LG1 -
Server Racks and Cabinets, Rack Mounting Solutions, Hammond
Test & Measurement Rack Cabinet C2RR Series – (C2RR197031BK1)
Server Racks and Cabinets, Rack Mounting Solutions, HammondTest & Measurement Rack Cabinet C2RR Series – (C2RR197031BK1)
Features
- Available in 24U, 36U, 40U and 45U mounting heights.
- Available in 23” overall width (19″ mounting width).
- Available in 23.62″ and 31.5″ overall depths.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Flush-mounted doors with quarter-turn lock.
- Solid side panels.
- One (1) interchangeable top panel.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- Drilled and 10-32 tapped flange 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Load rated for up to 1,500 lbs (680 kg).
- Grounding studs are provided on the frame as well as side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Included Components
- All configurations include:
- Welded steel frame with factory-installed nylon levelling feet, ground studs, and mounting points for optional casters.
- Two (2) pairs of adjustable depth EIA compliant 10-32 tapped flange mounting rails.
- Starter pack of SCREW1032-25 screws.
- Two (2) removable side panels (with 1/4 turn latches).
- C2RR Series Specific Components Include:
- One (1) solid locking door (Can be used as either front or rear door)
- One (1) solid top panel
- C2RR “D” Series Specific Components include (Replaced by C4RR):
-
One (1) locking front window door
-
One (1) locking rear louvred door
-
One (1) vented top panel with four (4) 3.5″ (89 mm) diameter cable access holes with covers
-
Are you looking for the CAK for wider legacy-wide C2 cabinets? Click here.
Accessories
Cabinet Baying/Ganging/Joining Kit
C2 Doors
Cabinet Top Panels
Door Adapter Kit
Side Panel Locking Kit
Cabinet Door Replacement Lock
Rack Shelves
Rack Mount Locking Storage Drawer
Vertical Cable Manager with Door
Vertical Cable Tray
Cable Lacing Bar
Horizontal Lacing Strip
Horizontal Hinged Cable Manager
Horizontal Ring Cable Manager
Cable Management Arm
Power Distribution Units (PDUs)
Mounting Hardware
Grounding & Bonding
Rack Panels
Cabinet Caster Set
SKU: C2RR197031BK1 -
Rack Mounting Solutions, Server Racks and Cabinets, Hammond
Test & Measurement Rack Cabinet C2RR Series – (C2RR197023LG1)
Rack Mounting Solutions, Server Racks and Cabinets, HammondTest & Measurement Rack Cabinet C2RR Series – (C2RR197023LG1)
Features
- Available in 24U, 36U, 40U and 45U mounting heights.
- Available in 23” overall width (19″ mounting width).
- Available in 23.62″ and 31.5″ overall depths.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Flush-mounted doors with quarter-turn lock.
- Solid side panels.
- One (1) interchangeable top panel.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- Drilled and 10-32 tapped flange 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Load rated for up to 1,500 lbs (680 kg).
- Grounding studs are provided on the frame as well as side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Included Components
- All configurations include:
- Welded steel frame with factory-installed nylon levelling feet, ground studs, and mounting points for optional casters.
- Two (2) pairs of adjustable depth EIA compliant 10-32 tapped flange mounting rails.
- Starter pack of SCREW1032-25 screws.
- Two (2) removable side panels (with 1/4 turn latches).
- C2RR Series Specific Components Include:
- One (1) solid locking door (Can be used as either front or rear door)
- One (1) solid top panel
- C2RR “D” Series Specific Components include (Replaced by C4RR):
-
One (1) locking front window door
-
One (1) locking rear louvred door
-
One (1) vented top panel with four (4) 3.5″ (89 mm) diameter cable access holes with covers
-
Are you looking for the CAK for wider legacy-wide C2 cabinets? Click here.
Accessories
Cabinet Baying/Ganging/Joining Kit
C2 Doors
Cabinet Top Panels
Door Adapter Kit
Side Panel Locking Kit
Cabinet Door Replacement Lock
Rack Shelves
Rack Mount Locking Storage Drawer
Vertical Cable Manager with Door
Vertical Cable Tray
Cable Lacing Bar
Horizontal Lacing Strip
Horizontal Hinged Cable Manager
Horizontal Ring Cable Manager
Cable Management Arm
Power Distribution Units (PDUs)
Mounting Hardware
Grounding & Bonding
Rack Panels
Cabinet Caster Set
SKU: C2RR197023LG1 -
Rack Mounting Solutions, Server Racks and Cabinets, Hammond
Test & Measurement Rack Cabinet C2RR Series – (C2RR197023BK1)
Rack Mounting Solutions, Server Racks and Cabinets, HammondTest & Measurement Rack Cabinet C2RR Series – (C2RR197023BK1)
Features
- Available in 24U, 36U, 40U and 45U mounting heights.
- Available in 23” overall width (19″ mounting width).
- Available in 23.62″ and 31.5″ overall depths.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Flush-mounted doors with quarter-turn lock.
- Solid side panels.
- One (1) interchangeable top panel.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- Drilled and 10-32 tapped flange 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Load rated for up to 1,500 lbs (680 kg).
- Grounding studs are provided on the frame as well as side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Included Components
- All configurations include:
- Welded steel frame with factory-installed nylon levelling feet, ground studs, and mounting points for optional casters.
- Two (2) pairs of adjustable depth EIA compliant 10-32 tapped flange mounting rails.
- Starter pack of SCREW1032-25 screws.
- Two (2) removable side panels (with 1/4 turn latches).
- C2RR Series Specific Components Include:
- One (1) solid locking door (Can be used as either front or rear door)
- One (1) solid top panel
- C2RR “D” Series Specific Components include (Replaced by C4RR):
-
One (1) locking front window door
-
One (1) locking rear louvred door
-
One (1) vented top panel with four (4) 3.5″ (89 mm) diameter cable access holes with covers
-
Are you looking for the CAK for wider legacy-wide C2 cabinets? Click here.
Accessories
Cabinet Baying/Ganging/Joining Kit
C2 Doors
Cabinet Top Panels
Door Adapter Kit
Side Panel Locking Kit
Cabinet Door Replacement Lock
Rack Shelves
Rack Mount Locking Storage Drawer
Vertical Cable Manager with Door
Vertical Cable Tray
Cable Lacing Bar
Horizontal Lacing Strip
Horizontal Hinged Cable Manager
Horizontal Ring Cable Manager
Cable Management Arm
Power Distribution Units (PDUs)
Mounting Hardware
Grounding & Bonding
Rack Panels
Cabinet Caster Set
SKU: C2RR197023BK1 -
Rack Mounting Solutions, Server Racks and Cabinets, Hammond
Test & Measurement Rack Cabinet C2RR Series – (C2RR196331LG1)
Rack Mounting Solutions, Server Racks and Cabinets, HammondTest & Measurement Rack Cabinet C2RR Series – (C2RR196331LG1)
Features
- Available in 24U, 36U, 40U and 45U mounting heights.
- Available in 23” overall width (19″ mounting width).
- Available in 23.62″ and 31.5″ overall depths.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Flush-mounted doors with quarter-turn lock.
- Solid side panels.
- One (1) interchangeable top panel.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- Drilled and 10-32 tapped flange 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Load rated for up to 1,500 lbs (680 kg).
- Grounding studs are provided on the frame as well as side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Included Components
- All configurations include:
- Welded steel frame with factory-installed nylon levelling feet, ground studs, and mounting points for optional casters.
- Two (2) pairs of adjustable depth EIA compliant 10-32 tapped flange mounting rails.
- Starter pack of SCREW1032-25 screws.
- Two (2) removable side panels (with 1/4 turn latches).
- C2RR Series Specific Components Include:
- One (1) solid locking door (Can be used as either front or rear door)
- One (1) solid top panel
- C2RR “D” Series Specific Components include (Replaced by C4RR):
-
One (1) locking front window door
-
One (1) locking rear louvred door
-
One (1) vented top panel with four (4) 3.5″ (89 mm) diameter cable access holes with covers
-
Are you looking for the CAK for wider legacy-wide C2 cabinets? Click here.
Accessories
Cabinet Baying/Ganging/Joining Kit
C2 Doors
Cabinet Top Panels
Door Adapter Kit
Side Panel Locking Kit
Cabinet Door Replacement Lock
Rack Shelves
Rack Mount Locking Storage Drawer
Vertical Cable Manager with Door
Vertical Cable Tray
Cable Lacing Bar
Horizontal Lacing Strip
Horizontal Hinged Cable Manager
Horizontal Ring Cable Manager
Cable Management Arm
Power Distribution Units (PDUs)
Mounting Hardware
Grounding & Bonding
Rack Panels
Cabinet Caster Set
SKU: C2RR196331LG1 -
Rack Mounting Solutions, Server Racks and Cabinets, Hammond
Test & Measurement Rack Cabinet C2RR Series – (C2RR196331BK1)
Rack Mounting Solutions, Server Racks and Cabinets, HammondTest & Measurement Rack Cabinet C2RR Series – (C2RR196331BK1)
Features
- Available in 24U, 36U, 40U and 45U mounting heights.
- Available in 23” overall width (19″ mounting width).
- Available in 23.62″ and 31.5″ overall depths.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Flush-mounted doors with quarter-turn lock.
- Solid side panels.
- One (1) interchangeable top panel.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- Drilled and 10-32 tapped flange 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Load rated for up to 1,500 lbs (680 kg).
- Grounding studs are provided on the frame as well as side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Included Components
- All configurations include:
- Welded steel frame with factory-installed nylon levelling feet, ground studs, and mounting points for optional casters.
- Two (2) pairs of adjustable depth EIA compliant 10-32 tapped flange mounting rails.
- Starter pack of SCREW1032-25 screws.
- Two (2) removable side panels (with 1/4 turn latches).
- C2RR Series Specific Components Include:
- One (1) solid locking door (Can be used as either front or rear door)
- One (1) solid top panel
- C2RR “D” Series Specific Components include (Replaced by C4RR):
-
One (1) locking front window door
-
One (1) locking rear louvred door
-
One (1) vented top panel with four (4) 3.5″ (89 mm) diameter cable access holes with covers
-
Are you looking for the CAK for wider legacy-wide C2 cabinets? Click here.
Accessories
Cabinet Baying/Ganging/Joining Kit
C2 Doors
Cabinet Top Panels
Door Adapter Kit
Side Panel Locking Kit
Cabinet Door Replacement Lock
Rack Shelves
Rack Mount Locking Storage Drawer
Vertical Cable Manager with Door
Vertical Cable Tray
Cable Lacing Bar
Horizontal Lacing Strip
Horizontal Hinged Cable Manager
Horizontal Ring Cable Manager
Cable Management Arm
Power Distribution Units (PDUs)
Mounting Hardware
Grounding & Bonding
Rack Panels
Cabinet Caster Set
SKU: C2RR196331BK1 -
Rack Mounting Solutions, Rack Accessories, Equipment Cooling, Hammond
Rack Mount Intake Blowers HB Series – (HB2UFILTER)
Rack Mounting Solutions, Rack Accessories, Equipment Cooling, HammondRack Mount Intake Blowers HB Series – (HB2UFILTER)
Features
- Standard 19″ rack mount
- Air delivery from more than 50% of their 17″ width
- Internal neoprene isolation mounts reduce transmission of vibration to the rack
- Air intake only, to pressurize the rack with filtered air
- Heavy steel construction
- Attractive 19″ stainless steel grille included
- 115 VAC, 50/60 Hz. motor is UL recognized, CSA certified, ball bearing type, cooled by incoming air
- Includes permanent filter (replacement filters available below)
- Comes with a 6ft STJ 3- wire cord
- Optional replacement filters come in a pack of five (5).
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Gallery
Accessories
Filter Coat
- Mounting Hardware
SKU: HB2UFILTER -
Mounting Rails, Rack Mounting Solutions, Rack Accessories, Hammond
Mounting Rails HLPUR Series – (HLP8UR)
Mounting Rails, Rack Mounting Solutions, Rack Accessories, HammondMounting Rails HLPUR Series – (HLP8UR)
Features
- Constructed in 14-gauge steel
- Sold in pairs
- EIA compliant 10-32 threaded or round hole punched mounting rails.
- Rails come stamped and numbered in 1U (1.75″) increments.
- For use with HLP, HLPB and ERP Series.
- Finished in smooth powder paint.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Gallery
Accessories
SKU: HLP8UR -
Rack Mounting Solutions, Server Racks and Cabinets, Hammond
Test & Measurement Rack Cabinet C2RR Series – (C2RR196323LG1)
Rack Mounting Solutions, Server Racks and Cabinets, HammondTest & Measurement Rack Cabinet C2RR Series – (C2RR196323LG1)
Features
- Available in 24U, 36U, 40U and 45U mounting heights.
- Available in 23” overall width (19″ mounting width).
- Available in 23.62″ and 31.5″ overall depths.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Flush-mounted doors with quarter-turn lock.
- Solid side panels.
- One (1) interchangeable top panel.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- Drilled and 10-32 tapped flange 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Load rated for up to 1,500 lbs (680 kg).
- Grounding studs are provided on the frame as well as side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Included Components
- All configurations include:
- Welded steel frame with factory-installed nylon levelling feet, ground studs, and mounting points for optional casters.
- Two (2) pairs of adjustable depth EIA compliant 10-32 tapped flange mounting rails.
- Starter pack of SCREW1032-25 screws.
- Two (2) removable side panels (with 1/4 turn latches).
- C2RR Series Specific Components Include:
- One (1) solid locking door (Can be used as either front or rear door)
- One (1) solid top panel
- C2RR “D” Series Specific Components include (Replaced by C4RR):
-
One (1) locking front window door
-
One (1) locking rear louvred door
-
One (1) vented top panel with four (4) 3.5″ (89 mm) diameter cable access holes with covers
-
Are you looking for the CAK for wider legacy-wide C2 cabinets? Click here.
Accessories
Cabinet Baying/Ganging/Joining Kit
C2 Doors
Cabinet Top Panels
Door Adapter Kit
Side Panel Locking Kit
Cabinet Door Replacement Lock
Rack Shelves
Rack Mount Locking Storage Drawer
Vertical Cable Manager with Door
Vertical Cable Tray
Cable Lacing Bar
Horizontal Lacing Strip
Horizontal Hinged Cable Manager
Horizontal Ring Cable Manager
Cable Management Arm
Power Distribution Units (PDUs)
Mounting Hardware
Grounding & Bonding
Rack Panels
Cabinet Caster Set
SKU: C2RR196323LG1 -
Rack Mounting Solutions, Server Racks and Cabinets, Hammond
Test & Measurement Rack Cabinet C2RR Series – (C2RR196323BK1)
Rack Mounting Solutions, Server Racks and Cabinets, HammondTest & Measurement Rack Cabinet C2RR Series – (C2RR196323BK1)
Features
- Available in 24U, 36U, 40U and 45U mounting heights.
- Available in 23” overall width (19″ mounting width).
- Available in 23.62″ and 31.5″ overall depths.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Flush-mounted doors with quarter-turn lock.
- Solid side panels.
- One (1) interchangeable top panel.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- Drilled and 10-32 tapped flange 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Load rated for up to 1,500 lbs (680 kg).
- Grounding studs are provided on the frame as well as side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Included Components
- All configurations include:
- Welded steel frame with factory-installed nylon levelling feet, ground studs, and mounting points for optional casters.
- Two (2) pairs of adjustable depth EIA compliant 10-32 tapped flange mounting rails.
- Starter pack of SCREW1032-25 screws.
- Two (2) removable side panels (with 1/4 turn latches).
- C2RR Series Specific Components Include:
- One (1) solid locking door (Can be used as either front or rear door)
- One (1) solid top panel
- C2RR “D” Series Specific Components include (Replaced by C4RR):
-
One (1) locking front window door
-
One (1) locking rear louvred door
-
One (1) vented top panel with four (4) 3.5″ (89 mm) diameter cable access holes with covers
-
Are you looking for the CAK for wider legacy-wide C2 cabinets? Click here.
Accessories
Cabinet Baying/Ganging/Joining Kit
C2 Doors
Cabinet Top Panels
Door Adapter Kit
Side Panel Locking Kit
Cabinet Door Replacement Lock
Rack Shelves
Rack Mount Locking Storage Drawer
Vertical Cable Manager with Door
Vertical Cable Tray
Cable Lacing Bar
Horizontal Lacing Strip
Horizontal Hinged Cable Manager
Horizontal Ring Cable Manager
Cable Management Arm
Power Distribution Units (PDUs)
Mounting Hardware
Grounding & Bonding
Rack Panels
Cabinet Caster Set
SKU: C2RR196323BK1 -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
Server Rack Cabinet RCSC Series – (RCSC1904231BK1)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondServer Rack Cabinet RCSC Series – (RCSC1904231BK1)
Ideal for your AV, IT/Server and Homelab applications, the RCSC Rack Cabinet features a stacking design that allows for up to three (3) cabinets* to be stacked atop each other. This Rack Cabinet is fully loaded and includes two (2) pairs of infinitely adjustable sliding EIA square-hole rails, punch-outs for cable entry and/or fan cooling and comes in a variety of sizes and depths.
The unique stacking feature enables your cabinet space to grow as your needs do. *Stack up to three (3) 12U, two (2) 24U or one (1) of each cabinet atop each other using the required RCSCBAY baying kit. The 12U cabinet is a great starter cabinet for any small to medium-sized business.
Features:
- Constructed in 16-gauge steel.
- Includes two (2) pairs of infinitely adjustable 19” EIA compliant square-hole mounting rails with rack unit markings.
- Starter pack of CAGKIT1032-25 screws and cage nuts included with 12U units.
- Starter pack of CAGKIT1032-50 screws and cage nuts included with 24U units.
- Four (4) embosses are included with support for optional levelling feet or casters.
- Grounding studs are provided on the body.
- The top and bottom of the RCSC include two (2) laser knockouts (per side) for cable-entry or fans (includes gasket strip material).
- Includes a laser knockout rear gland plate for floor-level cable entry.
- Ships unassembled in a flat pack container for easy handling and shipping protection.
Specifications:
- Mounting rails are infinitely adjustable in-depth and are fabricated of heavy-duty 14-gauge steel, painted smooth black.
- Optional doors are available in solid, tinted acrylic with venting (see above-left) and high airflow vented.
- Snap-in hinges can be mounted without having to bolt on from inside the cabinet. In addition, the hinges can be mounted on the left or right.
- High airflow perforated doors for both the front and rear of the cabinet are suggested for most server applications.
- Perforated doors meet server manufacturer Free-Air-Ratio (FAR) requirements at 63%.
- For 36” depth cabinet side panels include cable entry knockouts.
- Tested to nearly double the suggested load rating of 1,500 lbs (680 kg).
- Finished in textured RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Gallery
Accessories
Universal Rack Shelf
Adjustable Depth Shelf
Rack Mount Locking Storage Drawer
Four Post Mounting Sliding Shelf
Sliding Keyboard Shelf
Mounting Screw and Cage Nut Combo-Pack
PDUs and Outlet Strips
Rack Unit Label
Adjustable Depth Cable Manager
Horizontal Lacing Strip
Horizontal Hinged Cable Manager
Horizontal Ring Cable Manager
Horizontal Steel Finger Cable Manager
Rack Panels
Cabinet Caster Set
Grounding & Bonding
Leveling Feet
Fan Kits
SKU: RCSC1904231BK1 -
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Cabinets, Hammond
Swing-Out Sectional Wall Mount Rack Cabinet HWM Series – (HWM2432U26WDBK)
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Cabinets, HammondSwing-Out Sectional Wall Mount Rack Cabinet HWM Series – (HWM2432U26WDBK)
Features
- Available in two (2) depths and four (4) heights.
- All sizes include either vented 63% perforated front door or smoked window front door.
- Includes one (1) pair of 10-32 threaded rack rails with support for additional optional rails (see accessory table).
- Starter pack of SCREW1032-50 screws.
- Center section features:
- Heavy-duty spring-hinge pin for easy installation and removal.
- Sides that include two (2) vents and a fan grill.
- Can be installed to swing from left-to-right or right-to-left.
- Rear section features:
- The side of the rear section includes 2.50” and 2.00” knockouts.
- The top and bottom of the rear section include 3.00″, 2.00”, 1.38” and 1.12” knockouts.
- Generous cable management lances are located on the rear section as well as on mounting rails.
- Mounting points for outlet strips.
- Heavy-duty keyhole for wall mounting.
- Large opening in the rear for cable access.
- The front locking door and center section keyed the same (optional key available).
Specifications
- 14-gauge welded rear section; 16-gauge center section and doors.
- EIA compliant adjustable depth mounting rails.
- Grounding lugs located on top and bottom of the door, center and rear sections.
- UL Listed 2416 load rated for up to 350 lbs (158 kg). Static Load tested to 1,400 lbs (635 kg).
- Rugged sand-textured black powder paint reduces the look of fingerprints and marks.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Upgrade the cabinet to be dust-resistant with the HWCF Cabinet Sealing and Filter Kit.
Videos
Accessories
SKU: HWM2432U26WDBK -
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Cabinets, Hammond
Swing-Out Sectional Wall Mount Rack Cabinet HWM Series – (HWM2432U20WDBK)
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Cabinets, HammondSwing-Out Sectional Wall Mount Rack Cabinet HWM Series – (HWM2432U20WDBK)
Features
- Available in two (2) depths and four (4) heights.
- All sizes include either vented 63% perforated front door or smoked window front door.
- Includes one (1) pair of 10-32 threaded rack rails with support for additional optional rails (see accessory table).
- Starter pack of SCREW1032-50 screws.
- Center section features:
- Heavy-duty spring-hinge pin for easy installation and removal.
- Sides that include two (2) vents and a fan grill.
- Can be installed to swing from left-to-right or right-to-left.
- Rear section features:
- The side of the rear section includes 2.50” and 2.00” knockouts.
- The top and bottom of the rear section include 3.00″, 2.00”, 1.38” and 1.12” knockouts.
- Generous cable management lances are located on the rear section as well as on mounting rails.
- Mounting points for outlet strips.
- Heavy-duty keyhole for wall mounting.
- Large opening in the rear for cable access.
- The front locking door and center section keyed the same (optional key available).
Specifications
- 14-gauge welded rear section; 16-gauge center section and doors.
- EIA compliant adjustable depth mounting rails.
- Grounding lugs located on top and bottom of the door, center and rear sections.
- UL Listed 2416 load rated for up to 350 lbs (158 kg). Static Load tested to 1,400 lbs (635 kg).
- Rugged sand-textured black powder paint reduces the look of fingerprints and marks.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Upgrade the cabinet to be dust-resistant with the HWCF Cabinet Sealing and Filter Kit.
Videos
Accessories
SKU: HWM2432U20WDBK -
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Cabinets, Hammond
Swing-Out Sectional Wall Mount Rack Cabinet HWM Series – (HWM2432U26BK)
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Cabinets, HammondSwing-Out Sectional Wall Mount Rack Cabinet HWM Series – (HWM2432U26BK)
Features
- Available in two (2) depths and four (4) heights.
- All sizes include either vented 63% perforated front door or smoked window front door.
- Includes one (1) pair of 10-32 threaded rack rails with support for additional optional rails (see accessory table).
- Starter pack of SCREW1032-50 screws.
- Center section features:
- Heavy-duty spring-hinge pin for easy installation and removal.
- Sides that include two (2) vents and a fan grill.
- Can be installed to swing from left-to-right or right-to-left.
- Rear section features:
- The side of the rear section includes 2.50” and 2.00” knockouts.
- The top and bottom of the rear section include 3.00″, 2.00”, 1.38” and 1.12” knockouts.
- Generous cable management lances are located on the rear section as well as on mounting rails.
- Mounting points for outlet strips.
- Heavy-duty keyhole for wall mounting.
- Large opening in the rear for cable access.
- The front locking door and center section keyed the same (optional key available).
Specifications
- 14-gauge welded rear section; 16-gauge center section and doors.
- EIA compliant adjustable depth mounting rails.
- Grounding lugs located on top and bottom of the door, center and rear sections.
- UL Listed 2416 load rated for up to 350 lbs (158 kg). Static Load tested to 1,400 lbs (635 kg).
- Rugged sand-textured black powder paint reduces the look of fingerprints and marks.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Upgrade the cabinet to be dust-resistant with the HWCF Cabinet Sealing and Filter Kit.
Videos
Accessories
SKU: HWM2432U26BK