Rack Mounting Solutions
Showing 1225–1248 of 1884 results
-
Rack Mounting Solutions, Rack Accessories, Cabinet Top Panels, Hammond
Solid Top Panel C2TS Series – (C2T1923SLG1)
Rack Mounting Solutions, Rack Accessories, Cabinet Top Panels, HammondSolid Top Panel C2TS Series – (C2T1923SLG1)
Features
- Use with C2, C2RR, C4, C4RR, H1, RCK or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Encloses cabinets for airflow management.
- Finished in RAL9005 black or ASA61 gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: C2T1923SLG1 - Use with C2, C2RR, C4, C4RR, H1, RCK or CLC cabinet series.
-
Rack Mounting Solutions, Rack Accessories, Cabinet Top Panels, Hammond
Fan Top Panel C2TF Series – (C2T1923VFBK1)
Rack Mounting Solutions, Rack Accessories, Cabinet Top Panels, HammondFan Top Panel C2TF Series – (C2T1923VFBK1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Includes 8-32 Screw and Clip-nut cabinet fastening hardware.
- cURus recognized to UL507 and CSA C22.2 No.113.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Fan Tops for use with 4″ Fans:
- 4″ fan top panel – fans not included (see first table below).
- 4 or 6 openings depending on the depth of the rack.
- Maximum flexibility – add fans OR leave holes open (for cable access) OR use covers (see below) OR any combination.
Pre-Wired Fan Tops:
- Available with (4) 4″ fans or (1) 10″ fan (factory wired).
- Long life, ball bearing, 4″, 115 volts, 50/60 Hz. AC fan(s).
- Available in three depths and two colors.
- 4.7″ versions are available with or without adjustable thermostats.
- 10″ versions are available with or without cable entry holes.
Accessories
Tube Axial Fans
Metal Fan Guard
Filter Fan Grills
SKU: C2T1923VFBK1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Rack Mounting Solutions, Rack Accessories, Grounding & Bonding, Hammond
Grounding Bar and Bus Bars BUSBAR Series – (CBB63)
Rack Mounting Solutions, Rack Accessories, Grounding & Bonding, HammondGrounding Bar and Bus Bars BUSBAR Series – (CBB63)
Features
- Electro Tin Plated Copper Bus Bar, 100/300 micro inches of plating.
- The thin tin coating acts as a shield, inhibiting copper oxidization.
- Copper oxidization causes a poor electrical contact which then gets hot and increases the copper oxidization rate.
- Oxides, because of their poor conductivity, also cause arcing at the electrical contacts, eroding the copper.
- 3200 Volt rated Glass-Reinforced Thermoset Polyester insulators
- 180+ seconds of arc resistance
- UL 94 V0 flame resistance
- Mounting bracket holes 0.375” diameter
- Busbar available in 2” or 4” widths
- 10” in length
- 0.25” in thickness
- Hardware:
- ¼-20 x 0.75” length stainless steel Phillips machine screw (12 pcs.)
- ¼ stainless steel lock washer (12 pcs.)
- ¼-20 stainless steel hex nut (12 pcs.)
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Accessories
Rack Isolation Kit
SKU: CBB63 - Electro Tin Plated Copper Bus Bar, 100/300 micro inches of plating.
-
Rack Mounting Solutions, Open Frame Racks, Knockdown Open Frame Racks, Hammond
2-Post Open Frame Desktop Rack HDR Series – (HDR16UBK)
Rack Mounting Solutions, Open Frame Racks, Knockdown Open Frame Racks, Hammond2-Post Open Frame Desktop Rack HDR Series – (HDR16UBK)
The Hammond Desktop Rack (HDR) Series features a small form factor perfect for small projects. Available in 6U, 8U, 12U and 16U options, this rack series is ideal for smaller IT, HomeLab, Security and AV applications.
Features
- Base and panel constructed in 16-gauge steel.
- Includes two (2) 12-gauge steel 19 inch EIA compliant mounting rails.
- Rails are 10-32 tapped rails with rack space indicators.
- Rails are angled 10-degrees when rack is assembled.
- Starter pack SCREW1032-25 rack screws included.
- Available in 6U, 8U, 12U and 16U rack spacing.
- Side of rails include multiple tie points for cable management.
- Finished in smooth black powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- Tested to nearly double the suggested load rating of 195 lbs (89 kg).
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Gallery
Accessories
SKU: HDR16UBK -
Rack Mounting Solutions, Rack Accessories, Rack Shelves, Hammond
Two Post Centered Shelf DNDM Series – (DNDMS1918BK1)
Rack Mounting Solutions, Rack Accessories, Rack Shelves, HammondTwo Post Centered Shelf DNDM Series – (DNDMS1918BK1)
Features
- 16-gauge steel construction.
- The vented version provides a sturdy shelf without obstructing upward heat movement.
- The front and rear lips are folded for extra strength & become equipment retainers.
- Rugged textured black powder paint finish.
- The solid version is available in either 19″ or 23″ rack panel width.
- Tested to nearly double the suggested load rating of 200 lbs (91 kg).
- Finished in textured RAL9005 black powder paint
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Accessories
- Mounting Hardware
Hook and Loop Roll
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
19″ Mounting
Units shown: inch. Switch units to: mm
Part No. Part No. Overall Dimensions Rack Mounting Vented Solid Height Depth Units Width – DNDMS1916BK1 3.50 16.00 2U 19.00 DNDMV1918BK1 DNDMS1918BK1 3.50 18.00 2U 19.00 DNDMV19BK1 DNDMS19BK1 3.50 19.50 2U 19.00 – DNDMS1920BK1 3.50 20.00 2U 19.00 – DNDMS1922BK1 3.50 22.00 2U 19.00 – DNDMS1924BK1 3.50 24.00 2U 19.00 23″ Mounting
Units shown: inch. Switch units to: mm
Part No. Overall Dimensions Rack Mounting Solid Only Height Depth Units Width DNDMS23BK1 3.50 19.50 2U 23.00 SKU: DNDMS1918BK1 -
Rack Shelves, Rack Mounting Solutions, Rack Accessories, Hammond
Two Post Centered Shelf DNDM Series – (DNDMV1918BK1)
Rack Shelves, Rack Mounting Solutions, Rack Accessories, HammondTwo Post Centered Shelf DNDM Series – (DNDMV1918BK1)
Features
- 16-gauge steel construction.
- The vented version provides a sturdy shelf without obstructing upward heat movement.
- The front and rear lips are folded for extra strength & become equipment retainers.
- Rugged textured black powder paint finish.
- The solid version is available in either 19″ or 23″ rack panel width.
- Tested to nearly double the suggested load rating of 200 lbs (91 kg).
- Finished in textured RAL9005 black powder paint
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Accessories
- Mounting Hardware
Hook and Loop Roll
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
19″ Mounting
Units shown: inch. Switch units to: mm
Part No. Part No. Overall Dimensions Rack Mounting Vented Solid Height Depth Units Width – DNDMS1916BK1 3.50 16.00 2U 19.00 DNDMV1918BK1 DNDMS1918BK1 3.50 18.00 2U 19.00 DNDMV19BK1 DNDMS19BK1 3.50 19.50 2U 19.00 – DNDMS1920BK1 3.50 20.00 2U 19.00 – DNDMS1922BK1 3.50 22.00 2U 19.00 – DNDMS1924BK1 3.50 24.00 2U 19.00 23″ Mounting
Units shown: inch. Switch units to: mm
Part No. Overall Dimensions Rack Mounting Solid Only Height Depth Units Width DNDMS23BK1 3.50 19.50 2U 23.00 SKU: DNDMV1918BK1 -
Rack Mounting Solutions, Rack Accessories, Cable Managers, Hammond
Cable Management Arm CGUIDE Series – (CGUIDE)
Rack Mounting Solutions, Rack Accessories, Cable Managers, HammondCable Management Arm CGUIDE Series – (CGUIDE)
Features
- Designed to fit standard EIA rails.
- Helps eliminate cable stress and keep cables organized.
- Mounts to rear rack rail and rear of sliding equipment.
- Includes four (4) 10-32 mounting screws, two (2) washers and nuts.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Accessories
- Mounting Hardware
Hook and Loop Roll
SKU: CGUIDE -
Rack Mounting Solutions, Rack Accessories, Rack Shelves, Hammond
Universal Rack Shelf RAS Series – (RASU190107UBK1)
Rack Mounting Solutions, Rack Accessories, Rack Shelves, HammondUniversal Rack Shelf RAS Series – (RASU190107UBK1)
Features
- Constructed of 14 or 16 gauge steel.
- Universal design mounts to any standard EIA-compliant rack or cabinet.
- Allows easy rack mounting of equipment or items that do not have rack mounting capabilities.
- Mounts to rack rails either as an internal shelf or external shelf/work area.
- Available in either vented or solid versions.
- Rugged textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant
- Manufactured in North America
Accessories
Mounting Hardware
Hook and Loop Roll
SKU: RASU190107UBK1 -
Rack Mounting Solutions, Rack Accessories, Rack Panels, Hammond
Louvered Steel Rack Panels PVLL Series – (PVLL19010LG2)
Rack Mounting Solutions, Rack Accessories, Rack Panels, HammondLouvered Steel Rack Panels PVLL Series – (PVLL19010LG2)
Features
- Constructed of 16-gauge steel.
- Flanged for added strength.
- Fits standard EIA-compliant rails.
- Includes three (3) columns of four (4) inch wide louvres
- Finished in smooth powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Accessories
Mounting Hardware
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Part No. Usable Mounting Dimensions Black RAL 7035 Light Gray Rack Units Height PVLL19005BK2 PVLL19005LG2 3U 5.25 PVLL19007BK2 PVLL19007LG2 4U 7.00 PVLL19008BK2 PVLL19008LG2 5U 8.75 PVLL19010BK2 PVLL19010LG2 6U 10.50 PVLL19012BK2 PVLL19012LG2 7U 12.25 SKU: PVLL19010LG2 -
Rack Mounting Solutions, Rack Accessories, Rack Panels, Hammond
Louvered Steel Rack Panels PVLL Series – (PVLL19008LG2)
Rack Mounting Solutions, Rack Accessories, Rack Panels, HammondLouvered Steel Rack Panels PVLL Series – (PVLL19008LG2)
Features
- Constructed of 16-gauge steel.
- Flanged for added strength.
- Fits standard EIA-compliant rails.
- Includes three (3) columns of four (4) inch wide louvres
- Finished in smooth powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Accessories
Mounting Hardware
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Part No. Usable Mounting Dimensions Black RAL 7035 Light Gray Rack Units Height PVLL19005BK2 PVLL19005LG2 3U 5.25 PVLL19007BK2 PVLL19007LG2 4U 7.00 PVLL19008BK2 PVLL19008LG2 5U 8.75 PVLL19010BK2 PVLL19010LG2 6U 10.50 PVLL19012BK2 PVLL19012LG2 7U 12.25 SKU: PVLL19008LG2 -
Rack Mounting Solutions, Rack Accessories, Rack Panels, Hammond
Louvered Steel Rack Panels PVLL Series – (PVLL19012BK2)
Rack Mounting Solutions, Rack Accessories, Rack Panels, HammondLouvered Steel Rack Panels PVLL Series – (PVLL19012BK2)
Features
- Constructed of 16-gauge steel.
- Flanged for added strength.
- Fits standard EIA-compliant rails.
- Includes three (3) columns of four (4) inch wide louvres
- Finished in smooth powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Accessories
Mounting Hardware
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Part No. Usable Mounting Dimensions Black RAL 7035 Light Gray Rack Units Height PVLL19005BK2 PVLL19005LG2 3U 5.25 PVLL19007BK2 PVLL19007LG2 4U 7.00 PVLL19008BK2 PVLL19008LG2 5U 8.75 PVLL19010BK2 PVLL19010LG2 6U 10.50 PVLL19012BK2 PVLL19012LG2 7U 12.25 SKU: PVLL19012BK2 -
Rack Mounting Solutions, Rack Accessories, Rack Panels, Hammond
Louvered Steel Rack Panels PVLL Series – (PVLL19010BK2)
Rack Mounting Solutions, Rack Accessories, Rack Panels, HammondLouvered Steel Rack Panels PVLL Series – (PVLL19010BK2)
Features
- Constructed of 16-gauge steel.
- Flanged for added strength.
- Fits standard EIA-compliant rails.
- Includes three (3) columns of four (4) inch wide louvres
- Finished in smooth powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Accessories
Mounting Hardware
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Part No. Usable Mounting Dimensions Black RAL 7035 Light Gray Rack Units Height PVLL19005BK2 PVLL19005LG2 3U 5.25 PVLL19007BK2 PVLL19007LG2 4U 7.00 PVLL19008BK2 PVLL19008LG2 5U 8.75 PVLL19010BK2 PVLL19010LG2 6U 10.50 PVLL19012BK2 PVLL19012LG2 7U 12.25 SKU: PVLL19010BK2 -
Rack Mounting Solutions, Rack Accessories, Equipment Cooling, Hammond
Tube Axial Fans DNMF Series – (FAN80AC115)
Rack Mounting Solutions, Rack Accessories, Equipment Cooling, HammondTube Axial Fans DNMF Series – (FAN80AC115)
Features
- Choice of 3.15″ (80mm), 4.70″ (120mm), 5.91″ (150mm) or 10″ (254mm).
- Choice of either 115 or 230 VAC, 50/60 Hz.
- Impedance-protected motor.
- Class-B insulated.
- Ball-bearing fan construction, diecast aluminum body, and metal fan blades.
- Note:FAN150AC230, FAN10A115, FAN10A220 that has plastic fan blades.
- DNMF100AC, FAN150AC and FAN10A fans have male plug terminations (requires fan cords).
- FAN80AC fans have 11″ long lead wires.
- Includes mounting hardware.
Specifications
- All fan components are recognized to UL 507
- All fan components with the exception of FAN10A115, FAN10A220 and FAN150AC115 are CSA certified to C22.2 No. 113.
- FAN150AC115 is recognized to UL 507 and cUR recognized to C22.2 No.113, and TUV certified to EN60950-1.
- Finished in smooth black powder paint.
Save time and order our cabinet fan tops and/or fan kits:
- Cabinet Fan Tops
- Fan Kits – Come with all the essential components
- Low-Decibel Fan Kits – Quietly cools your equipment
Gallery
Accessories
Fan Cords
Filter Fan Grills
Metal Fan Guard
SKU: FAN80AC115 -
Rack Accessories, Mounting Hardware, Rack Mounting Solutions, Hammond
Square Hole Cage Nut CAGNUT Series – (1421CNBF100)
Rack Accessories, Mounting Hardware, Rack Mounting Solutions, HammondSquare Hole Cage Nut CAGNUT Series – (1421CNBF100)
Features
- Cage nuts for square hole rack mounting rails.
- Available in 10-32, 12-24 and M6 mounting profiles.
- Packaged in plastic clamshell or resealable jar (depending on quantity).
- Manufactured in North America.
- TAA Compliant.
Specifications
- Constructed of zinc-plated SAE 1050-1065 spring steel.
- 0.375in (9.54mm) square hole punched panel rails.
- Heat-treated through austempering.
- Recommended torque spec 31.4 +/- 20% inch-lbs
- Maximum load rating will vary depending on rail mounting and cabinet load rating.
Looking for screws as well? Get the CAGKIT that includes both screws and cage nuts.
Our legacy 25-pack https://americantechsupply.com/product/cagnut1032-50/ is priced to clear! 80% Off, available while supplies last! The cage nut is identical to the CAGNUT1032 but is the old part number.
Gallery
Accessories
Rack Screws with Pilot Point
- Cage Nut Installation Tool
SKU: 1421CNBF100 -
Rack Mounting Solutions, Rack Accessories, Mounting Hardware, Hammond
Square Hole Cage Nut CAGNUT Series – (CAGNUT1224-50)
Rack Mounting Solutions, Rack Accessories, Mounting Hardware, HammondSquare Hole Cage Nut CAGNUT Series – (CAGNUT1224-50)
Features
- Cage nuts for square hole rack mounting rails.
- Available in 10-32, 12-24 and M6 mounting profiles.
- Packaged in plastic clamshell or resealable jar (depending on quantity).
- Manufactured in North America.
- TAA Compliant.
Specifications
- Constructed of zinc-plated SAE 1050-1065 spring steel.
- 0.375in (9.54mm) square hole punched panel rails.
- Heat-treated through austempering.
- Recommended torque spec 31.4 +/- 20% inch-lbs
- Maximum load rating will vary depending on rail mounting and cabinet load rating.
Looking for screws as well? Get the CAGKIT that includes both screws and cage nuts.
Our legacy 25-pack https://americantechsupply.com/product/cagnut1032-50/ is priced to clear! 80% Off, available while supplies last! The cage nut is identical to the CAGNUT1032 but is the old part number.
Gallery
Accessories
Rack Screws with Pilot Point
- Cage Nut Installation Tool
SKU: CAGNUT1224-50 -
Rack Accessories, Mounting Hardware, Rack Mounting Solutions, Hammond
Square Hole Cage Nut CAGNUT Series – (CAGNUT1032-50)
Rack Accessories, Mounting Hardware, Rack Mounting Solutions, HammondSquare Hole Cage Nut CAGNUT Series – (CAGNUT1032-50)
Features
- Cage nuts for square hole rack mounting rails.
- Available in 10-32, 12-24 and M6 mounting profiles.
- Packaged in plastic clamshell or resealable jar (depending on quantity).
- Manufactured in North America.
- TAA Compliant.
Specifications
- Constructed of zinc-plated SAE 1050-1065 spring steel.
- 0.375in (9.54mm) square hole punched panel rails.
- Heat-treated through austempering.
- Recommended torque spec 31.4 +/- 20% inch-lbs
- Maximum load rating will vary depending on rail mounting and cabinet load rating.
Looking for screws as well? Get the CAGKIT that includes both screws and cage nuts.
Our legacy 25-pack https://americantechsupply.com/product/cagnut1032-50/ is priced to clear! 80% Off, available while supplies last! The cage nut is identical to the CAGNUT1032 but is the old part number.
Gallery
Accessories
Rack Screws with Pilot Point
- Cage Nut Installation Tool
SKU: CAGNUT1032-50 -
Rack Mounting Solutions, Rack Accessories, Cabinet Top Panels, Hammond
Solid Top Panel C2TS Series – (C2T1923SBK1)
Rack Mounting Solutions, Rack Accessories, Cabinet Top Panels, HammondSolid Top Panel C2TS Series – (C2T1923SBK1)
Features
- Use with C2, C2RR, C4, C4RR, H1, RCK or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Encloses cabinets for airflow management.
- Finished in RAL9005 black or ASA61 gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: C2T1923SBK1 - Use with C2, C2RR, C4, C4RR, H1, RCK or CLC cabinet series.
-
Rack Mounting Solutions, Rack Accessories, Casters and Leveling Feet, Hammond
Light Duty Caster Set 1425PHD Series – (1425PHD)
Rack Mounting Solutions, Rack Accessories, Casters and Leveling Feet, HammondLight Duty Caster Set 1425PHD Series – (1425PHD)
Features
- Features ball bearing swivel and hard composition wheels.
- Wheel is gray in color.
- Compatible with both RCH and REFK Series.
- Caster set has a weight capacity of 600 lbs (272 kg).
- Includes (2) locking and (2) non-locking casters
- Includes mounting hardware.
- RoHS and REACH compliant.
- Manufactured in North America
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
SKU: 1425PHD -
Rack Mounting Solutions, Rack Accessories, Doors, Hammond
SDC Doors SDCD Series – (SDC9USD)
Features
- Constructed in 16-gauge steel.
- Easily installs into SDC Series using the included hardware.
- Includes quarter-turn lock and hinges to mount on the cabinet.
- Door Options solid door, 63% Vented Door, cable Entry/Fan Door.
- An additional non-door option is the conduit/fan Panel that mounts directly to either end of the cabinet.
- Conduit knockouts include 2.5”, 2.0”, 13/18”, 13/4”, 11/8” and/or 7/8”.
- Also includes laser knockouts for optional fan kits.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Gallery
Accessories
SKU: SDC9USD -
Rack Accessories, Cable Managers, Rack Mounting Solutions, Hammond
Vertical Cable Tray with PDU Support H1PDU Series – (H1PDU45UWH)
Rack Accessories, Cable Managers, Rack Mounting Solutions, HammondVertical Cable Tray with PDU Support H1PDU Series – (H1PDU45UWH)
Features
- Constructed in 16-gauge steel.
- Designed to fit H1 cabinets manufactured by Hammond Mfg.
- The folded (flange) edges increase strength and ease of managing cables.
- Includes cutouts for installing cable ties or hook and loop tie-offs.
- Includes cutouts for tool-free mounting of most PDUs that include a round plastic shouldered button.
- Includes cabinet mounting hardware.
- Finished in textured RAL9005 black or RAL9003 white powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
- black powder paint finish.
PDU Mounting Compatibility
The H1The maximum space for the PDU to fit including large power plugs:
- H1 42U – 70.25”
- H1 45U – 75.50”
- H1 48U – 80.75”
- H1 52U – 87.75”
Gallery
SKU: H1PDU45UWH -
Rack Mounting Solutions, Rack Accessories, Cable Managers, Hammond
Vertical Cable Tray with PDU Support H1PDU Series – (H1PDU45UBK)
Rack Mounting Solutions, Rack Accessories, Cable Managers, HammondVertical Cable Tray with PDU Support H1PDU Series – (H1PDU45UBK)
Features
- Constructed in 16-gauge steel.
- Designed to fit H1 cabinets manufactured by Hammond Mfg.
- The folded (flange) edges increase strength and ease of managing cables.
- Includes cutouts for installing cable ties or hook and loop tie-offs.
- Includes cutouts for tool-free mounting of most PDUs that include a round plastic shouldered button.
- Includes cabinet mounting hardware.
- Finished in textured RAL9005 black or RAL9003 white powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
- black powder paint finish.
PDU Mounting Compatibility
The H1The maximum space for the PDU to fit including large power plugs:
- H1 42U – 70.25”
- H1 45U – 75.50”
- H1 48U – 80.75”
- H1 52U – 87.75”
Gallery
SKU: H1PDU45UBK -
Rack Mounting Solutions, Rack Accessories, Grounding & Bonding, Hammond
Grounding Bar and Bus Bars BUSBAR Series – (CBB56)
Rack Mounting Solutions, Rack Accessories, Grounding & Bonding, HammondGrounding Bar and Bus Bars BUSBAR Series – (CBB56)
Features
- Electro Tin Plated Copper Bus Bar, 100/300 micro inches of plating.
- The thin tin coating acts as a shield, inhibiting copper oxidization.
- Copper oxidization causes a poor electrical contact which then gets hot and increases the copper oxidization rate.
- Oxides, because of their poor conductivity, also cause arcing at the electrical contacts, eroding the copper.
- 3200 Volt rated Glass-Reinforced Thermoset Polyester insulators
- 180+ seconds of arc resistance
- UL 94 V0 flame resistance
- Mounting bracket holes 0.375” diameter
- Busbar available in 2” or 4” widths
- 10” in length
- 0.25” in thickness
- Hardware:
- ¼-20 x 0.75” length stainless steel Phillips machine screw (12 pcs.)
- ¼ stainless steel lock washer (12 pcs.)
- ¼-20 stainless steel hex nut (12 pcs.)
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Accessories
Rack Isolation Kit
SKU: CBB56 - Electro Tin Plated Copper Bus Bar, 100/300 micro inches of plating.
-
Rack Mounting Solutions, Rack Accessories, Cable Managers, Hammond
Vertical Cable Manager Extensions RRCH Series – (RRCMCH65)
Rack Mounting Solutions, Rack Accessories, Cable Managers, HammondVertical Cable Manager Extensions RRCH Series – (RRCMCH65)
Vertical cable manager extensions are a great way to manage and hide the visual appearance of network cables. Manager extensions mount either to the top of an enclosed cable trough or directly to a cable manager.
Features
- Constructed in 16-gauge steel.
- Mounting hardware included.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
RRCMCH & FRCMCH Features
- Comes unassembled with easy assembly and installation.
- Mounts directly to the top of the RRCM or RB-VCM Series.
RRCH Features
- Comes fully assembled with a removable access panel for simple cable installation.
- Mounts directly to the top of the RR19TM Series.
Gallery
SKU: RRCMCH65