Rack Mounting Solutions
Showing 1441–1464 of 1884 results
-
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Cabinets, Hammond
Swing-Out Sectional Wall Mount Rack Cabinet HWM Series – (HWMSR24U)
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Cabinets, HammondSwing-Out Sectional Wall Mount Rack Cabinet HWM Series – (HWMSR24U)
Features
- Available in two (2) depths and four (4) heights.
- All sizes include either vented 63% perforated front door or smoked window front door.
- Includes one (1) pair of 10-32 threaded rack rails with support for additional optional rails (see accessory table).
- Starter pack of SCREW1032-50 screws.
- Center section features:
- Heavy-duty spring-hinge pin for easy installation and removal.
- Sides that include two (2) vents and a fan grill.
- Can be installed to swing from left-to-right or right-to-left.
- Rear section features:
- The side of the rear section includes 2.50” and 2.00” knockouts.
- The top and bottom of the rear section include 3.00″, 2.00”, 1.38” and 1.12” knockouts.
- Generous cable management lances are located on the rear section as well as on mounting rails.
- Mounting points for outlet strips.
- Heavy-duty keyhole for wall mounting.
- Large opening in the rear for cable access.
- The front locking door and center section keyed the same (optional key available).
Specifications
- 14-gauge welded rear section; 16-gauge center section and doors.
- EIA compliant adjustable depth mounting rails.
- Grounding lugs located on top and bottom of the door, center and rear sections.
- UL Listed 2416 load rated for up to 350 lbs (158 kg). Static Load tested to 1,400 lbs (635 kg).
- Rugged sand-textured black powder paint reduces the look of fingerprints and marks.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Upgrade the cabinet to be dust-resistant with the HWCF Cabinet Sealing and Filter Kit.
Videos
Accessories
SKU: HWMSR24U -
Rack Mounting Solutions, Rack Accessories, Cable Managers, Hammond
Vertical Cable Tray VCT Series – (VCT85)
Rack Mounting Solutions, Rack Accessories, Cable Managers, HammondVertical Cable Tray VCT Series – (VCT85)
Features
- Constructed in 16-gauge steel.
- Designed to fit most Hammond cabinets and may be compatible with cabinets made by others.
- The folded (flange) edges increase strength and ease of managing cables.
- The VCT and VCTPDU Series includes cutouts for installing cable ties or hook and loop tie-offs.
- The VCTPDU also includes cutouts for toolless mounting of most PDUs that include a round plastic shouldered button.
- Includes mounting hardware.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Accessories
Hook and Loop Roll
Cabinet Rail Mounting Hardware
SKU: VCT85 -
Rack Mounting Solutions, Rack Accessories, Cable Managers, Hammond
Horizontal Steel Finger Cable Manager PCMDS Series – (RB-HFMD1)
Rack Mounting Solutions, Rack Accessories, Cable Managers, HammondHorizontal Steel Finger Cable Manager PCMDS Series – (RB-HFMD1)
Features:
- Constructed in 16-gauge steel.
- Snap open, hinged door.
- The rackmount side has five slotted openings.
- Openings in the rear for cable entry.
- Designed to fit standard 19” rails.
- Requires mounting hardware.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Accessories
Mounting Hardware
SKU: RB-HFMD1 -
Rack Mounting Solutions, Rack Accessories, Cable Managers, Hammond
Cable Lacing Bar CLB Series – (CLB192BK)
Rack Mounting Solutions, Rack Accessories, Cable Managers, HammondCable Lacing Bar CLB Series – (CLB192BK)
The Cable Lacing Bar (CLB) reduces strain on cables connected to a patch panel or device. Available in three depths the CLB is sold in packs of ten (10) to reduce packaging.
Features:
- Constructed of 0.25″ steel rod.
- Designed to reduce cable strain.
- Available with no offset, 2″ or 4″ offset.
- Designed to fit standard EIA 19” rails.
- Sold in packages of ten (10) pieces.
- Finished in smooth RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Gallery
Accessories
- Mounting Hardware
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
SKU: CLB192BK -
Rack Mounting Solutions, Rack Accessories, General Accessories, Hammond
Chassis Sliding Rack Rail Kit RSLIDE Series – (RSLIDE26)
Rack Mounting Solutions, Rack Accessories, General Accessories, HammondChassis Sliding Rack Rail Kit RSLIDE Series – (RSLIDE26)
Adjustable sliding rail kit for chassis. The perfect DIY solution for allowing equipment to rackmount and slide.
Features
- Heavy duty double rail, ball bearing type equipment slides.
- Adjustable depth.
- Sold in pairs.
- Mounts two (2) pairs of 19″ mounting rails.
- Rack mounting hardware sold separately.
- Supports up to 16.64″ equipment width between the slides.
- The slides feature a stopping mechanism, preventing the shelf from accidentally falling out of the slide tray.
- Up to 145 lbs (65 kg) in weight capacity.
- Slides are tested to BIFMA Standards with load capacity @ 12 times/minute for 55000 cycles minimum.
- Zinc plated finish.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
Gallery
Accessories
Extender Bracket for Sliding Shelves
Mounting Hardware
SKU: RSLIDE26 -
Rack Mounting Solutions, Rack Accessories, Rack Shelves, Hammond
Universal Rack Shelf RAS Series – (RASU190520BK1)
Rack Mounting Solutions, Rack Accessories, Rack Shelves, HammondUniversal Rack Shelf RAS Series – (RASU190520BK1)
Features
- Constructed of 14 or 16 gauge steel.
- Universal design mounts to any standard EIA-compliant rack or cabinet.
- Allows easy rack mounting of equipment or items that do not have rack mounting capabilities.
- Mounts to rack rails either as an internal shelf or external shelf/work area.
- Available in either vented or solid versions.
- Rugged textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant
- Manufactured in North America
Accessories
Mounting Hardware
Hook and Loop Roll
SKU: RASU190520BK1 -
Rack Mounting Solutions, Rack Accessories, Grounding & Bonding, Hammond
Grounding Bar and Bus Bars BUSBAR Series – (CBB31)
Rack Mounting Solutions, Rack Accessories, Grounding & Bonding, HammondGrounding Bar and Bus Bars BUSBAR Series – (CBB31)
Features
- Electro Tin Plated Copper Bus Bar, 100/300 micro inches of plating.
- The thin tin coating acts as a shield, inhibiting copper oxidization.
- Copper oxidization causes a poor electrical contact which then gets hot and increases the copper oxidization rate.
- Oxides, because of their poor conductivity, also cause arcing at the electrical contacts, eroding the copper.
- 3200 Volt rated Glass-Reinforced Thermoset Polyester insulators
- 180+ seconds of arc resistance
- UL 94 V0 flame resistance
- Mounting bracket holes 0.375” diameter
- Busbar available in 2” or 4” widths
- 10” in length
- 0.25” in thickness
- Hardware:
- ¼-20 x 0.75” length stainless steel Phillips machine screw (12 pcs.)
- ¼ stainless steel lock washer (12 pcs.)
- ¼-20 stainless steel hex nut (12 pcs.)
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Accessories
Rack Isolation Kit
SKU: CBB31 - Electro Tin Plated Copper Bus Bar, 100/300 micro inches of plating.
-
Rack Accessories, Mounting Rails, Rack Mounting Solutions, Hammond
Mounting Rack Rails URR Series – (URR12U)
Rack Accessories, Mounting Rails, Rack Mounting Solutions, HammondMounting Rack Rails URR Series – (URR12U)
Features:
- Constructed in 12-gauge steel.
- Sold in pairs.
- EIA/TIA compliant drilled and tapped 10-32 holes.
Rack Mounting hardware is sold separately. - Rails come included with rack unit indicator.
- Rails can be used for 19″, 23″ and 24″ rack mounting applications.
- Also compatible with RB-2PW wall rack and 24″ wide HWC wall cabinet.
- Side of rail folded for rear support or accessory mounting.
- Finished in RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Mounting Dimensions Rack Units Height URR2U 2U 3.50 URR3U 3U 5.25 URR4U 4U 7.00 URR6U 6U 10.50 URR8U 8U 14.00 URR10U 10U 17.50 URR12U 12U 21.00 URR14U 14U 24.50 URR16U 16U 28.00 URR18U 18U 31.50 URR21U 21U 36.75 URR27U 27U 47.25 URR36U 36U 63.00 URR45U 45U 78.75 SKU: URR12U -
Rack Mounting Solutions, Rack Accessories, Doors, Hammond
Solid Locking Door RCHD Series – (RCHR1908)
Rack Mounting Solutions, Rack Accessories, Doors, HammondSolid Locking Door RCHD Series – (RCHR1908)
Features:
- 16-gauge steel construction.
- Mounts either right or left hand hinge (door & cabinet are symmetrical).
- Includes installed lock and two keys.
- Finished in rugged textured powder paint to match RCH enclosures.
- Includes mounting hardware.
- Finished in textured RAL9005 black or RAL7035 light gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Looking for vented doors? The SDC Series has optional vented doors.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Use with Cabinet Panel Height Part No. Part No. Part No. RAL 7035 Additional Pair of Rack Units Height Black Door Light Gray Door Mounting Rails 5U 8.75 RCHD1908BK1 RCHD1908LG1 RCHR1908 6U 10.50 RCHD1910BK1 RCHD1910LG1 RCHR1910 8U 14.00 RCHD1914BK1 RCHD1914LG1 RCHR1914 10U 17.50 RCHD1917BK1 RCHD1917LG1 RCHR1917 13U 22.75 RCHD1922BK1 RCHD1922LG1 RCHR1922 16U 28.00 RCHD1928BK1 RCHD1928LG1 RCHR1928 SKU: RCHR1908 -
Rack Mounting Solutions, Rack Accessories, Rack Shelves, Hammond
Universal Rack Shelf RAS Series – (RASV190720BK1)
Rack Mounting Solutions, Rack Accessories, Rack Shelves, HammondUniversal Rack Shelf RAS Series – (RASV190720BK1)
Features
- Constructed of 14 or 16 gauge steel.
- Universal design mounts to any standard EIA-compliant rack or cabinet.
- Allows easy rack mounting of equipment or items that do not have rack mounting capabilities.
- Mounts to rack rails either as an internal shelf or external shelf/work area.
- Available in either vented or solid versions.
- Rugged textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant
- Manufactured in North America
Accessories
Mounting Hardware
Hook and Loop Roll
SKU: RASV190720BK1 -
Rack Mounting Solutions, Rack Accessories, Rack Panels, Hammond
Rack Rail Reducer Panel PBAS Series – (PBAS19012BK2)
Rack Mounting Solutions, Rack Accessories, Rack Panels, HammondRack Rail Reducer Panel PBAS Series – (PBAS19012BK2)
Features:
- Constructed in 14-gauge steel.
- EIA-compliant round punched hole or tapped 12-24 for 19” mounting.
- Converts standard 23-inch or 24-inch rack mounting rails to 19-inch rack mounting.
- Sold in pairs.
- Finished in textured RAL9005 black or RAL7035 light gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Accessories
- Mounting Hardware
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
23 to 19 Inch Rack Rail Reducer Panel
Units shown: inch. Switch units to: mm
Part No. Mounting Dimensions 12-24 Tapped Black Finish Rack Units Height PA2319001BK1 1U 1.75 PA2319003BK1 2U 3.50 PA2319005BK1 3U 5.25 PA2319007BK1 4U 7.00 PA2319008BK1 5U 8.75 24 to 19 Inch Rack Rail Reducer Panel
Units shown: inch. Switch units to: mm
Part No. Part No. Mounting Dimensions Clip-Nut Style Black Finish Clip-Nut Style Light Gray Finish Rack Units Height PBAS19001BK2 PBAS19001LG2 1U 1.75 PBAS19003BK2 PBAS19003LG2 2U 3.50 PBAS19005BK2 PBAS19005LG2 3U 5.25 PBAS19007BK2 PBAS19007LG2 4U 7.00 PBAS19008BK2 PBAS19008LG2 5U 8.75 PBAS19010BK2 PBAS19010LG2 6U 10.50 PBAS19012BK2 PBAS19012LG2 7U 12.25 PBAS19014BK2 PBAS19014LG2 8U 14.00 SKU: PBAS19012BK2 -
Rack Accessories, Cabinet Top Panels, Rack Mounting Solutions, Hammond
Fan Top Panel C2TF Series – (C2T1931VFBK1)
Rack Accessories, Cabinet Top Panels, Rack Mounting Solutions, HammondFan Top Panel C2TF Series – (C2T1931VFBK1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Includes 8-32 Screw and Clip-nut cabinet fastening hardware.
- cURus recognized to UL507 and CSA C22.2 No.113.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Fan Tops for use with 4″ Fans:
- 4″ fan top panel – fans not included (see first table below).
- 4 or 6 openings depending on the depth of the rack.
- Maximum flexibility – add fans OR leave holes open (for cable access) OR use covers (see below) OR any combination.
Pre-Wired Fan Tops:
- Available with (4) 4″ fans or (1) 10″ fan (factory wired).
- Long life, ball bearing, 4″, 115 volts, 50/60 Hz. AC fan(s).
- Available in three depths and two colors.
- 4.7″ versions are available with or without adjustable thermostats.
- 10″ versions are available with or without cable entry holes.
Accessories
Tube Axial Fans
Metal Fan Guard
Filter Fan Grills
SKU: C2T1931VFBK1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Knockdown Open Frame Racks, Rack Mounting Solutions, Open Frame Racks, Hammond
2-Post Open Frame Desktop Rack HDR Series – (HDR6UBK)
Knockdown Open Frame Racks, Rack Mounting Solutions, Open Frame Racks, Hammond2-Post Open Frame Desktop Rack HDR Series – (HDR6UBK)
The Hammond Desktop Rack (HDR) Series features a small form factor perfect for small projects. Available in 6U, 8U, 12U and 16U options, this rack series is ideal for smaller IT, HomeLab, Security and AV applications.
Features
- Base and panel constructed in 16-gauge steel.
- Includes two (2) 12-gauge steel 19 inch EIA compliant mounting rails.
- Rails are 10-32 tapped rails with rack space indicators.
- Rails are angled 10-degrees when rack is assembled.
- Starter pack SCREW1032-25 rack screws included.
- Available in 6U, 8U, 12U and 16U rack spacing.
- Side of rails include multiple tie points for cable management.
- Finished in smooth black powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- Tested to nearly double the suggested load rating of 195 lbs (89 kg).
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Gallery
Accessories
SKU: HDR6UBK -
Rack Mounting Solutions, Rack Accessories, General Accessories, Hammond
Chassis Sliding Rack Rail Kit RSLIDE Series – (RSLIDE22)
Rack Mounting Solutions, Rack Accessories, General Accessories, HammondChassis Sliding Rack Rail Kit RSLIDE Series – (RSLIDE22)
Adjustable sliding rail kit for chassis. The perfect DIY solution for allowing equipment to rackmount and slide.
Features
- Heavy duty double rail, ball bearing type equipment slides.
- Adjustable depth.
- Sold in pairs.
- Mounts two (2) pairs of 19″ mounting rails.
- Rack mounting hardware sold separately.
- Supports up to 16.64″ equipment width between the slides.
- The slides feature a stopping mechanism, preventing the shelf from accidentally falling out of the slide tray.
- Up to 145 lbs (65 kg) in weight capacity.
- Slides are tested to BIFMA Standards with load capacity @ 12 times/minute for 55000 cycles minimum.
- Zinc plated finish.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
Gallery
Accessories
Extender Bracket for Sliding Shelves
Mounting Hardware
SKU: RSLIDE22 -
Rack Mounting Solutions, Rack Accessories, Grounding & Bonding, Hammond
Rack Isolation Kit RIK Series – (RIK23Z4)
Rack Mounting Solutions, Rack Accessories, Grounding & Bonding, HammondRack Isolation Kit RIK Series – (RIK23Z4)
The Rack Isolation Kit, isolates open frame racks from conductive flooring to prevent multiple ground paths.
Features
- Universal design works with most rack manufacturers.
- Use with Hammond and Rack Basics part numbers:
- Open-ended design allows for retrofit installation.
- Isolation plates constructed of glass reinforced thermoset polyester.
- Included in Kit:
- (2) isolation plates
- (4) isolation grommets
- Bolt-down C4K-Z4 kit sold separately.
Gallery
SKU: RIK23Z4 -
Mounting Hardware, Rack Mounting Solutions, Rack Accessories, Hammond
Mounting Screw and Cage Nut Combo-Pack CAGKIT Series – (CAGKITM6-100)
Mounting Hardware, Rack Mounting Solutions, Rack Accessories, HammondMounting Screw and Cage Nut Combo-Pack CAGKIT Series – (CAGKITM6-100)
Features
- This combo-pack is available in 10-32, 12-24 or M6 Mounting Screws and Cage Nuts.
- Convenient to have when installing rack-mount equipment in server (square hole) rails.
- The pack includes an equal number of 0.750” length black rack screws and zinc plated cage nuts for square hole punched panel rails.
Specifications
Quadrex truss oval head screw.
- ø 0.186 Diameter.
- 0.75″ Length.
- Machine screw with full dog point.
- UNF-2A Threaded.
- Heat-treated low-carbon steel to ANSI B18.6.3 standard.
Captive flat washer constructed of black Nylon 6/6.
- Outside Diameter: 0.429″-0.439″
- Thickness: 0.030″-0.040″
Cage Nuts
- Constructed of zinc-plated SAE 1050-1065 spring steel.
- 0.375in (9.54mm) square hole punched panel rails.
- Heat-treated through austempering.
- Recommended torque spec 31.4 +/- 20% inch-lbs
- Maximum load rating will vary depending on rail mounting and cabinet load rating.
Gallery
SKU: CAGKITM6-100 -
Rack Mounting Solutions, Rack Accessories, Doors, Hammond
SDC Doors SDCD Series – (SDC9UCFP)
Features
- Constructed in 16-gauge steel.
- Easily installs into SDC Series using the included hardware.
- Includes quarter-turn lock and hinges to mount on the cabinet.
- Door Options solid door, 63% Vented Door, cable Entry/Fan Door.
- An additional non-door option is the conduit/fan Panel that mounts directly to either end of the cabinet.
- Conduit knockouts include 2.5”, 2.0”, 13/18”, 13/4”, 11/8” and/or 7/8”.
- Also includes laser knockouts for optional fan kits.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Gallery
Accessories
SKU: SDC9UCFP -
Rack Mounting Solutions, Rack Accessories, Rack Shelves, Hammond
Four Post Fixed Depth Shelf RF Series – (RFVS1921BK1)
Rack Mounting Solutions, Rack Accessories, Rack Shelves, HammondFour Post Fixed Depth Shelf RF Series – (RFVS1921BK1)
Features
- Constructed of heavy-duty 14 gauge steel.
- Front & rear lip folded for extra strength.
- The versatile design can be used upside down (front & rear lip become equipment retainers).
- Sides folded up for easy hardware installation from above.
- Sides are slotted for easy adjustment with most rail depth locations.
- Includes all mounting hardware.
- Tested to nearly double the suggested load rating of 350 lbs (159 kg).
- Finished in textured RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Please note that to mount this product you need to have two (2) pairs of combination rails within your cabinet. This product does not mount to the front and back of the rails like traditional rack mounting shelves.
If used with our CPR square hole rails you will need to order CPRSA rail adaptor for each shelf ordered.
Accessories
Fixed Shelf Rail Adapter
Square Hole Mounting Rail Adaptor
Hook and Loop Roll
SKU: RFVS1921BK1 -
Rack Mounting Solutions, Rack Accessories, Cable Managers, Hammond
Adjustable Depth Cable Manager RDCM Series – (RDCM2136BK)
Rack Mounting Solutions, Rack Accessories, Cable Managers, HammondAdjustable Depth Cable Manager RDCM Series – (RDCM2136BK)
Features
- Constructed in 16-gauge steel.
- Prevents cables from sagging when running front to rear.
- Universal design compatible with both racks and cabinets.
- Cable pass-through holes are evenly spaced.
- Easily mounts to EIA mounting rails.
- Cable tie-off slots help keep cables managed.
- Requires two pairs of mounting rails to install.
- Requires mounting hardware.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Accessories
Mounting Hardware
Hook and Loop Roll
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Overall Dimensions Rack Height Width Min Depth Max Depth Units RDCM2136BK 3.00 3.95 21.50 36.50 2U RDCM3348BK 3.00 3.95 33.50 48.50 2U SKU: RDCM2136BK -
Rack Accessories, Grounding & Bonding, Rack Mounting Solutions, Hammond
Grounding Bar and Bus Bars BUSBAR Series – (CBB22)
Rack Accessories, Grounding & Bonding, Rack Mounting Solutions, HammondGrounding Bar and Bus Bars BUSBAR Series – (CBB22)
Features
- Electro Tin Plated Copper Bus Bar, 100/300 micro inches of plating.
- The thin tin coating acts as a shield, inhibiting copper oxidization.
- Copper oxidization causes a poor electrical contact which then gets hot and increases the copper oxidization rate.
- Oxides, because of their poor conductivity, also cause arcing at the electrical contacts, eroding the copper.
- 3200 Volt rated Glass-Reinforced Thermoset Polyester insulators
- 180+ seconds of arc resistance
- UL 94 V0 flame resistance
- Mounting bracket holes 0.375” diameter
- Busbar available in 2” or 4” widths
- 10” in length
- 0.25” in thickness
- Hardware:
- ¼-20 x 0.75” length stainless steel Phillips machine screw (12 pcs.)
- ¼ stainless steel lock washer (12 pcs.)
- ¼-20 stainless steel hex nut (12 pcs.)
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Accessories
Rack Isolation Kit
SKU: CBB22 - Electro Tin Plated Copper Bus Bar, 100/300 micro inches of plating.
-
Rack Mounting Solutions, Rack Accessories, Mounting Hardware, Hammond
Mounting Screw and Cage Nut Combo-Pack CAGKIT Series – (CAGKIT1224-100)
Rack Mounting Solutions, Rack Accessories, Mounting Hardware, HammondMounting Screw and Cage Nut Combo-Pack CAGKIT Series – (CAGKIT1224-100)
Features
- This combo-pack is available in 10-32, 12-24 or M6 Mounting Screws and Cage Nuts.
- Convenient to have when installing rack-mount equipment in server (square hole) rails.
- The pack includes an equal number of 0.750” length black rack screws and zinc plated cage nuts for square hole punched panel rails.
Specifications
Quadrex truss oval head screw.
- ø 0.186 Diameter.
- 0.75″ Length.
- Machine screw with full dog point.
- UNF-2A Threaded.
- Heat-treated low-carbon steel to ANSI B18.6.3 standard.
Captive flat washer constructed of black Nylon 6/6.
- Outside Diameter: 0.429″-0.439″
- Thickness: 0.030″-0.040″
Cage Nuts
- Constructed of zinc-plated SAE 1050-1065 spring steel.
- 0.375in (9.54mm) square hole punched panel rails.
- Heat-treated through austempering.
- Recommended torque spec 31.4 +/- 20% inch-lbs
- Maximum load rating will vary depending on rail mounting and cabinet load rating.
Gallery
SKU: CAGKIT1224-100 -
Rack Mounting Solutions, Rack Accessories, Rack Panels, Hammond
Formed Open Rack Panel 7- Series – (7-350D)
Rack Mounting Solutions, Rack Accessories, Rack Panels, HammondFormed Open Rack Panel 7- Series – (7-350D)
Features
- Standard 19″ rack mount.
- 0.06″ thick aluminum construction.
- Is easily customized in the field.
- Natural aluminum finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Accessories
- Mounting Hardware
- Rack Mount Locking Hinged Door Panel
- Rail Mounting Hinged Security Door
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Overall Dimensions Rack Height Width Depth Units 7-350D 3.47 17.00 5.25 2U 7-525D 5.22 17.00 5.25 3U SKU: 7-350D