Equipment Cooling

Features

• Standard 19″ rack mount
• Air delivery from more than 50% of their 17″ width
• Internal neoprene isolation mounts reduce transmission of vibration to the rack
• Air intake only, to pressurize the rack with filtered air
• Heavy steel construction
• Attractive 19″ stainless steel grille included
• 115 VAC, 50/60 Hz. motor is UL recognized, CSA certified, ball bearing type, cooled by incoming air
• Includes permanent filter (replacement filters available below)
• Comes with a 6ft STJ 3- wire cord
• Optional replacement filters come in a pack of five (5).
• TAA-compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America.

Gallery

Features

• Standard 19″ rack mount
• Air delivery from more than 50% of their 17″ width
• Internal neoprene isolation mounts reduce transmission of vibration to the rack
• Air intake only, to pressurize the rack with filtered air
• Heavy steel construction
• Attractive 19″ stainless steel grille included
• 115 VAC, 50/60 Hz. motor is UL recognized, CSA certified, ball bearing type, cooled by incoming air
• Includes permanent filter (replacement filters available below)
• Comes with a 6ft STJ 3- wire cord
• Optional replacement filters come in a pack of five (5).
• TAA-compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America.

Gallery

Features

• Standard 19″ rack mount
• Compact and economical rack cooling solution.
• Fan trays can be positioned at the bottom of a rack to force air through the cabinet, at the top to exhaust air out or below specific pieces of equipment for spot cooling
• Choice of two operating voltages 115VAC (or 220VAC) – both 50/60 Hz., thermally protected, ball bearing fans
• Circuit breaker protected
• Low profile 1.75″ (1U) of panel space
• 115VAC versions include a 6′ 14/3 STJW cord with moulded 3 prong plug (NEMA 5-15P)
• 220VAC versions include an IEC input receptacle (IEC320-C14)
• Integral finger guards above and below fans
• Case width is 17″
• 6 and 9 fan units include an adjustable rear mounting bracket (mounts to rear panel rails) for extra stability
• Shipped fully assembled
• Available with or without on/off switch
• Finished in textured black powder paint
• TAA-compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America.

Accessories

Features

• Standard 19″ rack mount
• Compact and economical rack cooling solution.
• Fan trays can be positioned at the bottom of a rack to force air through the cabinet, at the top to exhaust air out or below specific pieces of equipment for spot cooling
• Choice of two operating voltages 115VAC (or 220VAC) – both 50/60 Hz., thermally protected, ball bearing fans
• Circuit breaker protected
• Low profile 1.75″ (1U) of panel space
• 115VAC versions include a 6′ 14/3 STJW cord with moulded 3 prong plug (NEMA 5-15P)
• 220VAC versions include an IEC input receptacle (IEC320-C14)
• Integral finger guards above and below fans
• Case width is 17″
• 6 and 9 fan units include an adjustable rear mounting bracket (mounts to rear panel rails) for extra stability
• Shipped fully assembled
• Available with or without on/off switch
• Finished in textured black powder paint
• TAA-compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America.

Accessories

Features

• Standard 19″ rack mount
• Compact and economical rack cooling solution.
• Fan trays can be positioned at the bottom of a rack to force air through the cabinet, at the top to exhaust air out or below specific pieces of equipment for spot cooling
• Choice of two operating voltages 115VAC (or 220VAC) – both 50/60 Hz., thermally protected, ball bearing fans
• Circuit breaker protected
• Low profile 1.75″ (1U) of panel space
• 115VAC versions include a 6′ 14/3 STJW cord with moulded 3 prong plug (NEMA 5-15P)
• 220VAC versions include an IEC input receptacle (IEC320-C14)
• Integral finger guards above and below fans
• Case width is 17″
• 6 and 9 fan units include an adjustable rear mounting bracket (mounts to rear panel rails) for extra stability
• Shipped fully assembled
• Available with or without on/off switch
• Finished in textured black powder paint
• TAA-compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America.

Accessories

Features

• Standard 19″ rack mount
• Compact and economical rack cooling solution.
• Fan trays can be positioned at the bottom of a rack to force air through the cabinet, at the top to exhaust air out or below specific pieces of equipment for spot cooling
• Choice of two operating voltages 115VAC (or 220VAC) – both 50/60 Hz., thermally protected, ball bearing fans
• Circuit breaker protected
• Low profile 1.75″ (1U) of panel space
• 115VAC versions include a 6′ 14/3 STJW cord with moulded 3 prong plug (NEMA 5-15P)
• 220VAC versions include an IEC input receptacle (IEC320-C14)
• Integral finger guards above and below fans
• Case width is 17″
• 6 and 9 fan units include an adjustable rear mounting bracket (mounts to rear panel rails) for extra stability
• Shipped fully assembled
• Available with or without on/off switch
• Finished in textured black powder paint
• TAA-compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America.

Accessories

Features

• Fan guards improve the appearance and safety of your installed fan system.
• Designed for optimal airflow.
• Easy to clean.
• Includes mounting hardware.

Gallery

Features

• Standard 19″ rack mount
• Compact and economical rack cooling solution.
• Fan trays can be positioned at the bottom of a rack to force air through the cabinet, at the top to exhaust air out or below specific pieces of equipment for spot cooling
• Choice of two operating voltages 115VAC (or 220VAC) – both 50/60 Hz., thermally protected, ball bearing fans
• Circuit breaker protected
• Low profile 1.75″ (1U) of panel space
• 115VAC versions include a 6′ 14/3 STJW cord with moulded 3 prong plug (NEMA 5-15P)
• 220VAC versions include an IEC input receptacle (IEC320-C14)
• Integral finger guards above and below fans
• Case width is 17″
• 6 and 9 fan units include an adjustable rear mounting bracket (mounts to rear panel rails) for extra stability
• Shipped fully assembled
• Available with or without on/off switch
• Finished in textured black powder paint
• TAA-compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America.

Accessories

Features

• Standard 19″ rack mount
• Compact and economical rack cooling solution.
• Fan trays can be positioned at the bottom of a rack to force air through the cabinet, at the top to exhaust air out or below specific pieces of equipment for spot cooling
• Choice of two operating voltages 115VAC (or 220VAC) – both 50/60 Hz., thermally protected, ball bearing fans
• Circuit breaker protected
• Low profile 1.75″ (1U) of panel space
• 115VAC versions include a 6′ 14/3 STJW cord with moulded 3 prong plug (NEMA 5-15P)
• 220VAC versions include an IEC input receptacle (IEC320-C14)
• Integral finger guards above and below fans
• Case width is 17″
• 6 and 9 fan units include an adjustable rear mounting bracket (mounts to rear panel rails) for extra stability
• Shipped fully assembled
• Available with or without on/off switch
• Finished in textured black powder paint
• TAA-compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America.

Accessories

Features

Extend the life of your rack-mount equipment by increasing airflow within your server rack or cabinet. Hammond Fan Kits are available with one (1) or two (2) fans. Our fan kits come with the essentials and include chrome fan grills for added safety. Our fans run on AC Power and are available in both high CFM or low-decibel for audio/visual and office environments.

If your fans will be mounted more than 12″ apart when using the kits with two (2) fans, refer to the DNFC Fan Cord series listed in our accessories below for a longer single connection wire.

Features

• Kit includes:
  • One (1) or Two (2) Ball bearing type fan(s).
  • Two (2) chrome metal grills per fan.
  • One (1) cord assembly.
  • One (1) or Two (2) packages of mounting hardware.
• Fan component is recognized to UL 507 and CSA certified.
• Decibel (db) rating is measured at 12” to 24” from the source.
• Assembled in North America.

Gallery