Equipment Cooling

The DNFF Fan kit is ideal when sealing a cabinet or enclosure. Unlike the DNFK, the DNFF does not include an AC plug as it is designed to be hard-wired with or without a thermostat.

Features

• Kit includes one (1) of the following:
  • Fan
  • Plastic Filter Grill
  • Filter
  • Metal Grill
  • Wire Cord or Leads (see table)
  • Includes Mounting Hardware
• Flame retardant, ABS plastic filter fan grill is moulded in a choice of four colors to match our racks & accessories.
  • “BK” (Black)
  • “GY” (ANSI 61 Gray)
  • “LG” (Light Gray – RAL7035)
  • “CG” (Beige) – AVAILABLE WHILE SUPPLIED LAST
• Fan component is UL recognized to UL 507, and cUL recognized or CSA certified to CSA-C22.2 No. 113.
• The filter is designed to meet IP5X dust resistance.
• If required, complementary exhaust filter grill kits (without fan) available – see XPFA Series

The DNFF Fan kit is ideal when sealing a cabinet or enclosure. Unlike the DNFK, the DNFF does not include an AC plug as it is designed to be hard-wired with or without a thermostat.

Features

• Kit includes one (1) of the following:
  • Fan
  • Plastic Filter Grill
  • Filter
  • Metal Grill
  • Wire Cord or Leads (see table)
  • Includes Mounting Hardware
• Flame retardant, ABS plastic filter fan grill is moulded in a choice of four colors to match our racks & accessories.
  • “BK” (Black)
  • “GY” (ANSI 61 Gray)
  • “LG” (Light Gray – RAL7035)
  • “CG” (Beige) – AVAILABLE WHILE SUPPLIED LAST
• Fan component is UL recognized to UL 507, and cUL recognized or CSA certified to CSA-C22.2 No. 113.
• The filter is designed to meet IP5X dust resistance.
• If required, complementary exhaust filter grill kits (without fan) available – see XPFA Series

The DNFF Fan kit is ideal when sealing a cabinet or enclosure. Unlike the DNFK, the DNFF does not include an AC plug as it is designed to be hard-wired with or without a thermostat.

Features

• Kit includes one (1) of the following:
  • Fan
  • Plastic Filter Grill
  • Filter
  • Metal Grill
  • Wire Cord or Leads (see table)
  • Includes Mounting Hardware
• Flame retardant, ABS plastic filter fan grill is moulded in a choice of four colors to match our racks & accessories.
  • “BK” (Black)
  • “GY” (ANSI 61 Gray)
  • “LG” (Light Gray – RAL7035)
  • “CG” (Beige) – AVAILABLE WHILE SUPPLIED LAST
• Fan component is UL recognized to UL 507, and cUL recognized or CSA certified to CSA-C22.2 No. 113.
• The filter is designed to meet IP5X dust resistance.
• If required, complementary exhaust filter grill kits (without fan) available – see XPFA Series

Features

• Choice of two or three fan models – mounted on a standard width 19″ rack panel – shipped assembled as shown.
• The front of the panel is punched for finger protection and the rear of the fans assembled with metal guards
• Perfect as an exhaust fan panel or when using “push-pull” cooling (ie..unit pulls air out of the rack cabinet)
• Rugged textured black powder paint finish.
• Two (2) or Three (3) fan daisy chain wire lead/cord, 72″ in length.
• TAA-compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America.

Features

• Choice of 3.15″ (80mm), 4.70″ (120mm), 5.91″ (150mm) or 10″ (254mm).
• Choice of either 115 or 230 VAC, 50/60 Hz.
• Impedance-protected motor.
• Class-B insulated.
• Ball-bearing fan construction, diecast aluminum body, and metal fan blades.
• Note:FAN150AC230, FAN10A115, FAN10A220 that has plastic fan blades.
• DNMF100AC, FAN150AC and FAN10A fans have male plug terminations (requires fan cords).
• FAN80AC fans have 11″ long lead wires.
• Includes mounting hardware.

Specifications

• All fan components are recognized to UL 507
• All fan components with the exception of FAN10A115, FAN10A220 and FAN150AC115 are CSA certified to C22.2 No. 113.
• FAN150AC115 is recognized to UL 507 and cUR recognized to C22.2 No.113, and TUV certified to EN60950-1.
• Finished in smooth black powder paint.

Save time and order our cabinet fan tops and/or fan kits:

• Cabinet Fan Tops
• Fan Kits – Come with all the essential components
• Low-Decibel Fan Kits – Quietly cools your equipment

Features

• Choice of 3.15″ (80mm), 4.70″ (120mm), 5.91″ (150mm) or 10″ (254mm).
• Choice of either 115 or 230 VAC, 50/60 Hz.
• Impedance-protected motor.
• Class-B insulated.
• Ball-bearing fan construction, diecast aluminum body, and metal fan blades.
• Note:FAN150AC230, FAN10A115, FAN10A220 that has plastic fan blades.
• DNMF100AC, FAN150AC and FAN10A fans have male plug terminations (requires fan cords).
• FAN80AC fans have 11″ long lead wires.
• Includes mounting hardware.

Specifications

• All fan components are recognized to UL 507
• All fan components with the exception of FAN10A115, FAN10A220 and FAN150AC115 are CSA certified to C22.2 No. 113.
• FAN150AC115 is recognized to UL 507 and cUR recognized to C22.2 No.113, and TUV certified to EN60950-1.
• Finished in smooth black powder paint.

Save time and order our cabinet fan tops and/or fan kits:

• Cabinet Fan Tops
• Fan Kits – Come with all the essential components
• Low-Decibel Fan Kits – Quietly cools your equipment

Features

• Choice of two or three fan models – mounted on a standard width 19″ rack panel – shipped assembled as shown.
• The front of the panel is punched for finger protection and the rear of the fans assembled with metal guards
• Perfect as an exhaust fan panel or when using “push-pull” cooling (ie..unit pulls air out of the rack cabinet)
• Rugged textured black powder paint finish.
• Two (2) or Three (3) fan daisy chain wire lead/cord, 72″ in length.
• TAA-compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America.

Features

• Fan guards improve the appearance and safety of your installed fan system.
• Designed for optimal airflow.
• Easy to clean.
• Includes mounting hardware.

Features

• Choice of 3.15″ (80mm), 4.70″ (120mm), 5.91″ (150mm) or 10″ (254mm).
• Choice of either 115 or 230 VAC, 50/60 Hz.
• Impedance-protected motor.
• Class-B insulated.
• Ball-bearing fan construction, diecast aluminum body, and metal fan blades.
• Note:FAN150AC230, FAN10A115, FAN10A220 that has plastic fan blades.
• DNMF100AC, FAN150AC and FAN10A fans have male plug terminations (requires fan cords).
• FAN80AC fans have 11″ long lead wires.
• Includes mounting hardware.

Specifications

• All fan components are recognized to UL 507
• All fan components with the exception of FAN10A115, FAN10A220 and FAN150AC115 are CSA certified to C22.2 No. 113.
• FAN150AC115 is recognized to UL 507 and cUR recognized to C22.2 No.113, and TUV certified to EN60950-1.
• Finished in smooth black powder paint.

Save time and order our cabinet fan tops and/or fan kits:

• Cabinet Fan Tops
• Fan Kits – Come with all the essential components
• Low-Decibel Fan Kits – Quietly cools your equipment

Extend the life of your rack-mount equipment by increasing airflow within your server rack or cabinet. Hammond Fan Kits are available with one (1) or two (2) fans. Our fan kits come with the essentials and include chrome fan grills for added safety. Our fans run on AC Power and are available in both high CFM or low-decibel for audio/visual and office environments.

If your fans will be mounted more than 12″ apart when using the kits with two (2) fans, refer to the DNFC Fan Cord series listed in our accessories below for a longer single connection wire.

Features

• Kit includes:
  • One (1) or Two (2) Ball bearing type fan(s).
  • Two (2) chrome metal grills per fan.
  • One (1) cord assembly.
  • One (1) or Two (2) packages of mounting hardware.
• Fan component is recognized to UL 507 and CSA certified.
• Decibel (db) rating is measured at 12” to 24” from the source.
• Assembled in North America.

The DNFF Fan kit is ideal when sealing a cabinet or enclosure. Unlike the DNFK, the DNFF does not include an AC plug as it is designed to be hard-wired with or without a thermostat.

Features

• Kit includes one (1) of the following:
  • Fan
  • Plastic Filter Grill
  • Filter
  • Metal Grill
  • Wire Cord or Leads (see table)
  • Includes Mounting Hardware
• Flame retardant, ABS plastic filter fan grill is moulded in a choice of four colors to match our racks & accessories.
  • “BK” (Black)
  • “GY” (ANSI 61 Gray)
  • “LG” (Light Gray – RAL7035)
  • “CG” (Beige) – AVAILABLE WHILE SUPPLIED LAST
• Fan component is UL recognized to UL 507, and cUL recognized or CSA certified to CSA-C22.2 No. 113.
• The filter is designed to meet IP5X dust resistance.
• If required, complementary exhaust filter grill kits (without fan) available – see XPFA Series

The DNFF Fan kit is ideal when sealing a cabinet or enclosure. Unlike the DNFK, the DNFF does not include an AC plug as it is designed to be hard-wired with or without a thermostat.

Features

• Kit includes one (1) of the following:
  • Fan
  • Plastic Filter Grill
  • Filter
  • Metal Grill
  • Wire Cord or Leads (see table)
  • Includes Mounting Hardware
• Flame retardant, ABS plastic filter fan grill is moulded in a choice of four colors to match our racks & accessories.
  • “BK” (Black)
  • “GY” (ANSI 61 Gray)
  • “LG” (Light Gray – RAL7035)
  • “CG” (Beige) – AVAILABLE WHILE SUPPLIED LAST
• Fan component is UL recognized to UL 507, and cUL recognized or CSA certified to CSA-C22.2 No. 113.
• The filter is designed to meet IP5X dust resistance.
• If required, complementary exhaust filter grill kits (without fan) available – see XPFA Series