Mounting Hardware

The 1421 screw provides a standard 0.625” rack screws length with 10-32 threads. The screw itself features a slotted oval head and has a nickel plate finish.

The 1421 screw provides a standard 0.625” rack screws length with 10-32 threads. The screw itself features a slotted oval head and has a nickel plate finish.

Don’t get screwed! Our screw pack features a convenient jar, starting point and factory-installed washer. If you’ve encountered difficult part numbers, this product is for you. The SCREW series offers packs of rack mounting screws designed for ease of installation. Factory hardened, these screws are strip-resistant and are available in a variety of convenient quantities.

Features

• Available in 10-32, 12-24 and M6 threading.
• Heat-treated to resist stripping.
• Self-guiding pilot/dog point.
• Includes factory-installed nylon washer.
• Finished in black oxide.

Specifications

• Quadrex truss oval head screw.
  • ø 0.186 Diameter.
  • 0.75″ Length.
  • Machine screw with full dog point.
  • UNF-2A Threaded.
  • Heat-treated low-carbon steel to ANSI B18.6.3 standard.
     
• Captive flat washer constructed of black Nylon 6/6.
  • Outside Diameter: 0.429″-0.439″
  • Thickness: 0.030″-0.040″

Features

• Cage nuts for square hole rack mounting rails.
• Available in 10-32, 12-24 and M6 mounting profiles.
• Packaged in plastic clamshell or resealable jar (depending on quantity).
• Manufactured in North America.
• TAA Compliant.

Specifications

• Constructed of zinc-plated SAE 1050-1065 spring steel.
• 0.375in (9.54mm) square hole punched panel rails.
• Heat-treated through austempering.
• Recommended torque spec 31.4 +/- 20% inch-lbs
• Maximum load rating will vary depending on rail mounting and cabinet load rating.

Looking for screws as well? Get the CAGKIT that includes both screws and cage nuts.

Our legacy 25-pack https://americantechsupply.com/product/cagnut1032-50/ is priced to clear! 80% Off, available while supplies last! The cage nut is identical to the CAGNUT1032 but is the old part number.

Features

• Extra spring nuts.
• 1/4 – 20 Strut spring nut.
• 1/4 – 20 x 1/2″ bolt.
• Used only in a number of our smaller floor and wall mounting cabinets.

Cabinet Compatibility

• RCH

Part Details

Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)

Clip Nuts are a great alternative to Cage Nuts and have many more uses. Whether your rack has non-threaded round holes or square, clip nuts are an easier solution to speed up your installation.

Features

• 10-32 clip nuts for non-threaded rack rails.
• Heat-treated by means of austemper.
• Available in black or plated steel finish.
• Ships in clam shell or resealable jar, depending on quantity.

Specifications

• Constructed of SAE 1050-1065 spring steel.
• Recommended torque spec 31.4 +/- 20% inch-lbs
• For use with 0.069-0.079″ panel thickness.
• Hardness: HRC 38-42.
• Maximum load rating will vary depending on rail mounting and cabinet load rating.
• 1421NP are zinc plated CR3.

Features

• Extra spring nuts.
• 1/4 – 20 Strut spring nut.
• 1/4 – 20 x 1/2″ bolt.
• Used only in a number of our smaller floor and wall mounting cabinets.

Cabinet Compatibility

• RCH

Part Details

Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)

Don’t get screwed! Our screw pack features a convenient jar, starting point and factory-installed washer. If you’ve encountered difficult part numbers, this product is for you. The SCREW series offers packs of rack mounting screws designed for ease of installation. Factory hardened, these screws are strip-resistant and are available in a variety of convenient quantities.

Features

• Available in 10-32, 12-24 and M6 threading.
• Heat-treated to resist stripping.
• Self-guiding pilot/dog point.
• Includes factory-installed nylon washer.
• Finished in black oxide.

Specifications

• Quadrex truss oval head screw.
  • ø 0.186 Diameter.
  • 0.75″ Length.
  • Machine screw with full dog point.
  • UNF-2A Threaded.
  • Heat-treated low-carbon steel to ANSI B18.6.3 standard.
     
• Captive flat washer constructed of black Nylon 6/6.
  • Outside Diameter: 0.429″-0.439″
  • Thickness: 0.030″-0.040″

Don’t get screwed! Our screw pack features a convenient jar, starting point and factory-installed washer. If you’ve encountered difficult part numbers, this product is for you. The SCREW series offers packs of rack mounting screws designed for ease of installation. Factory hardened, these screws are strip-resistant and are available in a variety of convenient quantities.

Features

• Available in 10-32, 12-24 and M6 threading.
• Heat-treated to resist stripping.
• Self-guiding pilot/dog point.
• Includes factory-installed nylon washer.
• Finished in black oxide.

Specifications

• Quadrex truss oval head screw.
  • ø 0.186 Diameter.
  • 0.75″ Length.
  • Machine screw with full dog point.
  • UNF-2A Threaded.
  • Heat-treated low-carbon steel to ANSI B18.6.3 standard.
     
• Captive flat washer constructed of black Nylon 6/6.
  • Outside Diameter: 0.429″-0.439″
  • Thickness: 0.030″-0.040″

The 1421 screw provides a standard 0.625” rack screws length with 10-32 threads. The screw itself features a slotted oval head and has a nickel plate finish.

Don’t get screwed! Our screw pack features a convenient jar, starting point and factory-installed washer. If you’ve encountered difficult part numbers, this product is for you. The SCREW series offers packs of rack mounting screws designed for ease of installation. Factory hardened, these screws are strip-resistant and are available in a variety of convenient quantities.

Features

• Available in 10-32, 12-24 and M6 threading.
• Heat-treated to resist stripping.
• Self-guiding pilot/dog point.
• Includes factory-installed nylon washer.
• Finished in black oxide.

Specifications

• Quadrex truss oval head screw.
  • ø 0.186 Diameter.
  • 0.75″ Length.
  • Machine screw with full dog point.
  • UNF-2A Threaded.
  • Heat-treated low-carbon steel to ANSI B18.6.3 standard.
     
• Captive flat washer constructed of black Nylon 6/6.
  • Outside Diameter: 0.429″-0.439″
  • Thickness: 0.030″-0.040″

Features

• Slotted & phillips combination pan head screws
• Use where economy is important OR for close spacing.
  • Example: multiple 1.75″ (1U) panels are mounted next to each other (as cup washers will interfere with each other)
• Zinc plated

Part Details

Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)

Units shown: inch. Switch units to: mm