Rack Shelves

Features

• Designed for use with our heavy-duty DNRR and DRZ4 double-tapped two (2) post racks.
• Constructed of heavy-duty 12-gauge steel.
• Use to support heavy chassis or batteries for DC battery array.
• Choice of 19-inch or 24-inch deep.
• The front and rear lips are folded and welded for extra strength and liquid retainer.
  • For a similar design that is light-duty and vented, see the DNRM Series.
• Finished in textured RAL9005 black powder paint.
• Tested to nearly double the suggested load rating of 550 lbs (250 kg).
• TAA-compliant for GSA Schedule purchases.
• RoHS and REACH compliant.
• Manufactured in North America.

Part Details

Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)

19 Inch Rack Mounting Shelf

Units shown: inch. Switch units to: mm

23 Inch Rack Mounting Shelf

Units shown: inch. Switch units to: mm

What’s Inside the Box

Features

• Constructed of 14 or 16 gauge steel.
• Universal design mounts to any standard EIA-compliant rack or cabinet.
• Allows easy rack mounting of equipment or items that do not have rack mounting capabilities.
• Mounts to rack rails either as an internal shelf or external shelf/work area.
• Available in either vented or solid versions.
• Rugged textured RAL9005 black powder paint finish.
• TAA-compliant for GSA Schedule purchases.
• RoHS and REACH compliant
• Manufactured in North America

In the past, mounting deep equipment to a 2-post rack was a major challenge. Deep equipment, when not properly supported can sag and cause damage to the equipment housing. The RDAB is similar to a 2U shelf but allows the rack equipment to be positioned in the center of the rack. This helps stabilize the rack while using less space than having equipment mounted behind. 

Features

• Constructed in 14-gauge steel.
• Available in four (4) depths.
• Angles mount to 19-inch, 23-inch and 24-inch EIA rack mounting rails. 
• Ideal for mounting a UPS, Server, Switch, NVR and other rack-mount equipment.
• Mounts to the front and/or rear of the rack for maximum load rating.
• Finished in RAL9005 black powder paint.
• Includes all four (4) pieces shown as well as mounting hardware.
• Tested to nearly double the suggested load rating of 400 lbs (181 kg).
• TAA-compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America.

Features

• Constructed of 14 or 16 gauge steel.
• Universal design mounts to any standard EIA-compliant rack or cabinet.
• Allows easy rack mounting of equipment or items that do not have rack mounting capabilities.
• Mounts to rack rails either as an internal shelf or external shelf/work area.
• Available in either vented or solid versions.
• Rugged textured RAL9005 black powder paint finish.
• TAA-compliant for GSA Schedule purchases.
• RoHS and REACH compliant
• Manufactured in North America

Features

• Constructed of 14 or 16 gauge steel.
• Universal design mounts to any standard EIA-compliant rack or cabinet.
• Allows easy rack mounting of equipment or items that do not have rack mounting capabilities.
• Mounts to rack rails either as an internal shelf or external shelf/work area.
• Available in either vented or solid versions.
• Rugged textured RAL9005 black powder paint finish.
• TAA-compliant for GSA Schedule purchases.
• RoHS and REACH compliant
• Manufactured in North America

Features

• Designed for use with our heavy-duty DNRR and DRZ4 double-tapped two (2) post racks or any 2 post rack.
• Constructed of heavy-duty 16 gauge steel.
• Choice of 19″ or 24″ deep (19″ deep shown).
• The vented version provides a sturdy shelf without obstructing upward heat movement.
• The front and rear lips folded for extra strength & become equipment retainers.
• Finished in textured RAL9005 black powder paint.
• Tested to nearly double the suggested load rating of 300 lbs (136 kg).
  • For a similar design rated for 550 lbs (227 kg), see the BRS Series.
• TAA-compliant for GSA Schedule purchases.
• RoHS and REACH compliant.
• Manufactured in North America.

This rack shelf has been designed to provide superior ventilation for both cable and satellite boxes as well as other components that generate considerable amounts of heat. Featuring two adjustable foam-padded mounting bars for securing components without fear of scratches.

Features

• Allows easy rack mounting of narrow equipment or items that do not have rack mounting capabilities.
• Includes two adjustable gaskets (to protect from scratching the clamped equipment) horizontal clamps.
• Designed for equipment requiring front adjustment without sliding around the shelf (ie…pushbuttons, jacks, plugs, dials etc.).
• Choice of four clamp locations depending on the depth of the equipment.
• Choice of three shelf heights (see table below).
• Mounted equipment height should be at least 1/2″ shorter than shelf “panel height” to allow clearance for the gasket clamps (see table below).
• Provides a sturdy shelf without obstructing upward heat movement.
• The rear lip is folded up for extra strength & doubles as an equipment retainer.
• 14-gauge steel construction.
• Tested to nearly double the suggested load rating of 200 lbs (91 kg).
• Rugged textured RAL9005 black powder paint finish.
• TAA-compliant for GSA Schedule purchases.
• RoHS and REACH compliant.
• Manufactured in North America.

Features

• Constructed of 14-gauge steel. 
• Mounts to rack rails using 3.47″ (2U) of vertical rack space.
• Rear lip to reduce the chance of equipment being pushed off the rear of the shelf.
• The new ergonomic designed keyboard tray supports a full-size keyboard.
• Finished in textured RAL9005 black powder paint.
• Tested to nearly double the suggested load rating of 100 lbs (45 kg).
• TAA-compliant for GSA Schedule purchases.
• RoHS and REACH compliant.
• Manufactured in North America.

Features

• Designed for use with our heavy-duty DNRR and DRZ4 double-tapped two (2) post racks or any 2 post rack.
• Constructed of heavy-duty 16 gauge steel.
• Choice of 19″ or 24″ deep (19″ deep shown).
• The vented version provides a sturdy shelf without obstructing upward heat movement.
• The front and rear lips folded for extra strength & become equipment retainers.
• Finished in textured RAL9005 black powder paint.
• Tested to nearly double the suggested load rating of 300 lbs (136 kg).
  • For a similar design rated for 550 lbs (227 kg), see the BRS Series.
• TAA-compliant for GSA Schedule purchases.
• RoHS and REACH compliant.
• Manufactured in North America.

Features

• Constructed of 14-Gauge Steel.
• Telescoping design provides three (3) usable depths.
• Fits within a single EIA rack unit and telescopes to cover the entire depth.
• Available in both solid and vented.
  • Choose the vented option to allow for airflow and/or cable management tie points.
• Ships fully assembled.
• Mounts to 4 post frame/rack
• Shelf load capacity is noted in the table below.
• Optional ADSB support bar increases load capacity up to 550 lbs (250 kg).
  • 36-42 inch depth option rated for 450 lbs (204 kg) with ADSB installed.
• Finished in RAL9005 black powder paint.
• TAA-compliant for GSA Schedule purchases.
• RoHS and REACH compliant.
• Manufactured in North America.

Features

• Designed for use with our heavy-duty DNRR and DRZ4 double-tapped two (2) post racks or any 2 post rack.
• Constructed of heavy-duty 16 gauge steel.
• Choice of 19″ or 24″ deep (19″ deep shown).
• The vented version provides a sturdy shelf without obstructing upward heat movement.
• The front and rear lips folded for extra strength & become equipment retainers.
• Finished in textured RAL9005 black powder paint.
• Tested to nearly double the suggested load rating of 300 lbs (136 kg).
  • For a similar design rated for 550 lbs (227 kg), see the BRS Series.
• TAA-compliant for GSA Schedule purchases.
• RoHS and REACH compliant.
• Manufactured in North America.

This rack shelf has been designed to provide superior ventilation for both cable and satellite boxes as well as other components that generate considerable amounts of heat. Featuring two adjustable foam-padded mounting bars for securing components without fear of scratches.

Features

• Allows easy rack mounting of narrow equipment or items that do not have rack mounting capabilities.
• Includes two adjustable gaskets (to protect from scratching the clamped equipment) horizontal clamps.
• Designed for equipment requiring front adjustment without sliding around the shelf (ie…pushbuttons, jacks, plugs, dials etc.).
• Choice of four clamp locations depending on the depth of the equipment.
• Choice of three shelf heights (see table below).
• Mounted equipment height should be at least 1/2″ shorter than shelf “panel height” to allow clearance for the gasket clamps (see table below).
• Provides a sturdy shelf without obstructing upward heat movement.
• The rear lip is folded up for extra strength & doubles as an equipment retainer.
• 14-gauge steel construction.
• Tested to nearly double the suggested load rating of 200 lbs (91 kg).
• Rugged textured RAL9005 black powder paint finish.
• TAA-compliant for GSA Schedule purchases.
• RoHS and REACH compliant.
• Manufactured in North America.