Unassembled
Showing 1–24 of 98 results
-
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
Server Rack Cabinet RCSC Series – (RCSC1904231BK1)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondServer Rack Cabinet RCSC Series – (RCSC1904231BK1)
Ideal for your AV, IT/Server and Homelab applications, the RCSC Rack Cabinet features a stacking design that allows for up to three (3) cabinets* to be stacked atop each other. This Rack Cabinet is fully loaded and includes two (2) pairs of infinitely adjustable sliding EIA square-hole rails, punch-outs for cable entry and/or fan cooling and comes in a variety of sizes and depths.
The unique stacking feature enables your cabinet space to grow as your needs do. *Stack up to three (3) 12U, two (2) 24U or one (1) of each cabinet atop each other using the required RCSCBAY baying kit. The 12U cabinet is a great starter cabinet for any small to medium-sized business.
Features:
- Constructed in 16-gauge steel.
- Includes two (2) pairs of infinitely adjustable 19” EIA compliant square-hole mounting rails with rack unit markings.
- Starter pack of CAGKIT1032-25 screws and cage nuts included with 12U units.
- Starter pack of CAGKIT1032-50 screws and cage nuts included with 24U units.
- Four (4) embosses are included with support for optional levelling feet or casters.
- Grounding studs are provided on the body.
- The top and bottom of the RCSC include two (2) laser knockouts (per side) for cable-entry or fans (includes gasket strip material).
- Includes a laser knockout rear gland plate for floor-level cable entry.
- Ships unassembled in a flat pack container for easy handling and shipping protection.
Specifications:
- Mounting rails are infinitely adjustable in-depth and are fabricated of heavy-duty 14-gauge steel, painted smooth black.
- Optional doors are available in solid, tinted acrylic with venting (see above-left) and high airflow vented.
- Snap-in hinges can be mounted without having to bolt on from inside the cabinet. In addition, the hinges can be mounted on the left or right.
- High airflow perforated doors for both the front and rear of the cabinet are suggested for most server applications.
- Perforated doors meet server manufacturer Free-Air-Ratio (FAR) requirements at 63%.
- For 36” depth cabinet side panels include cable entry knockouts.
- Tested to nearly double the suggested load rating of 1,500 lbs (680 kg).
- Finished in textured RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Gallery
Accessories
Universal Rack Shelf
Adjustable Depth Shelf
Rack Mount Locking Storage Drawer
Four Post Mounting Sliding Shelf
Sliding Keyboard Shelf
Mounting Screw and Cage Nut Combo-Pack
PDUs and Outlet Strips
Rack Unit Label
Adjustable Depth Cable Manager
Horizontal Lacing Strip
Horizontal Hinged Cable Manager
Horizontal Ring Cable Manager
Horizontal Steel Finger Cable Manager
Rack Panels
Cabinet Caster Set
Grounding & Bonding
Leveling Feet
Fan Kits
SKU: RCSC1904231BK1 -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
IT, Security and A/V Rack Cabinet RCK Series – (RCK36U32BK)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondIT, Security and A/V Rack Cabinet RCK Series – (RCK36U32BK)
We designed our new RCK Cabinet series for your Homelab and Pro-AV applications. We’ve included loads of unique features such as bonus rack units, compatibility for standard hardware components, and more. Every RCK is self-squaring and takes just minutes to assemble. In addition, each cabinet has mounting points for our easy four-screw field-installable doors.
Features
- Available in six (6) heights and two (2) depths.
- Optional locking doors are constructed in 16-gauge steel. The door(s) install in minutes and are available in solid, vented, and tinted window.
- Doors include a locking swing handle compatible with electronic locking handles.
- The ready-to-assemble self-squaring cabinet body is constructed in 16-gauge steel and includes vents for optional fans on the cabinet sides.
- Includes two (2) pairs of adjustable depth 10-32 threaded EIA compliant rack rails.
- Both the top and bottom-rear of the cabinet feature a removable conduit knockout 1U panel. The top-rear can be used as a bonus 1U rack mounting point for equipment or rack accessories.
- The front of the cabinet includes at both top and bottom a steel plate. When removed reveals a Decora® compatible mounting point.
- Numerous cable tie-off points are included for front-to-rear cable management.
- Cabinet top includes solid top panel and conduit knockouts for additional cable entry.
- Cabinet base also includes mounting holes for optional casters or levelling feet.
- Both top and cabinet bottom includes an opening compatible with interchangeable “1923” sized top panels.
- Cabinet ganging kit included.
- Includes 50-pack of SCREW1032-50 screws.
Specifications
- Cabinet frame constructed in 16-gauge steel.
- Mounting rails constructed in 12-gauge steel.
- Top-Rear of cabinet included 3.00″, 2.50” and 2.0” knockouts for the conduit.
- Rear 1U panels include 1.375″, 1.125″ and 0.675″ knockouts.
- Include multiple bonding and grounding points.
- Load rated for up to 1,050 lbs (476 kg). Rolling caster load rated for up to 600 lbs (272 kg)
- Finished in textured RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Gallery
Accessories
SKU: RCK36U32BK -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
IT, Security and A/V Rack Cabinet RCK Series – (RCK42U32BK)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondIT, Security and A/V Rack Cabinet RCK Series – (RCK42U32BK)
We designed our new RCK Cabinet series for your Homelab and Pro-AV applications. We’ve included loads of unique features such as bonus rack units, compatibility for standard hardware components, and more. Every RCK is self-squaring and takes just minutes to assemble. In addition, each cabinet has mounting points for our easy four-screw field-installable doors.
Features
- Available in six (6) heights and two (2) depths.
- Optional locking doors are constructed in 16-gauge steel. The door(s) install in minutes and are available in solid, vented, and tinted window.
- Doors include a locking swing handle compatible with electronic locking handles.
- The ready-to-assemble self-squaring cabinet body is constructed in 16-gauge steel and includes vents for optional fans on the cabinet sides.
- Includes two (2) pairs of adjustable depth 10-32 threaded EIA compliant rack rails.
- Both the top and bottom-rear of the cabinet feature a removable conduit knockout 1U panel. The top-rear can be used as a bonus 1U rack mounting point for equipment or rack accessories.
- The front of the cabinet includes at both top and bottom a steel plate. When removed reveals a Decora® compatible mounting point.
- Numerous cable tie-off points are included for front-to-rear cable management.
- Cabinet top includes solid top panel and conduit knockouts for additional cable entry.
- Cabinet base also includes mounting holes for optional casters or levelling feet.
- Both top and cabinet bottom includes an opening compatible with interchangeable “1923” sized top panels.
- Cabinet ganging kit included.
- Includes 50-pack of SCREW1032-50 screws.
Specifications
- Cabinet frame constructed in 16-gauge steel.
- Mounting rails constructed in 12-gauge steel.
- Top-Rear of cabinet included 3.00″, 2.50” and 2.0” knockouts for the conduit.
- Rear 1U panels include 1.375″, 1.125″ and 0.675″ knockouts.
- Include multiple bonding and grounding points.
- Load rated for up to 1,050 lbs (476 kg). Rolling caster load rated for up to 600 lbs (272 kg)
- Finished in textured RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Gallery
Accessories
SKU: RCK42U32BK -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
IT, Security and A/V Rack Cabinet RCK Series – (RCK36U25BK)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondIT, Security and A/V Rack Cabinet RCK Series – (RCK36U25BK)
We designed our new RCK Cabinet series for your Homelab and Pro-AV applications. We’ve included loads of unique features such as bonus rack units, compatibility for standard hardware components, and more. Every RCK is self-squaring and takes just minutes to assemble. In addition, each cabinet has mounting points for our easy four-screw field-installable doors.
Features
- Available in six (6) heights and two (2) depths.
- Optional locking doors are constructed in 16-gauge steel. The door(s) install in minutes and are available in solid, vented, and tinted window.
- Doors include a locking swing handle compatible with electronic locking handles.
- The ready-to-assemble self-squaring cabinet body is constructed in 16-gauge steel and includes vents for optional fans on the cabinet sides.
- Includes two (2) pairs of adjustable depth 10-32 threaded EIA compliant rack rails.
- Both the top and bottom-rear of the cabinet feature a removable conduit knockout 1U panel. The top-rear can be used as a bonus 1U rack mounting point for equipment or rack accessories.
- The front of the cabinet includes at both top and bottom a steel plate. When removed reveals a Decora® compatible mounting point.
- Numerous cable tie-off points are included for front-to-rear cable management.
- Cabinet top includes solid top panel and conduit knockouts for additional cable entry.
- Cabinet base also includes mounting holes for optional casters or levelling feet.
- Both top and cabinet bottom includes an opening compatible with interchangeable “1923” sized top panels.
- Cabinet ganging kit included.
- Includes 50-pack of SCREW1032-50 screws.
Specifications
- Cabinet frame constructed in 16-gauge steel.
- Mounting rails constructed in 12-gauge steel.
- Top-Rear of cabinet included 3.00″, 2.50” and 2.0” knockouts for the conduit.
- Rear 1U panels include 1.375″, 1.125″ and 0.675″ knockouts.
- Include multiple bonding and grounding points.
- Load rated for up to 1,050 lbs (476 kg). Rolling caster load rated for up to 600 lbs (272 kg)
- Finished in textured RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Gallery
Accessories
SKU: RCK36U25BK -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
IT, Security and A/V Rack Cabinet RCK Series – (RCK24U32BK)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondIT, Security and A/V Rack Cabinet RCK Series – (RCK24U32BK)
We designed our new RCK Cabinet series for your Homelab and Pro-AV applications. We’ve included loads of unique features such as bonus rack units, compatibility for standard hardware components, and more. Every RCK is self-squaring and takes just minutes to assemble. In addition, each cabinet has mounting points for our easy four-screw field-installable doors.
Features
- Available in six (6) heights and two (2) depths.
- Optional locking doors are constructed in 16-gauge steel. The door(s) install in minutes and are available in solid, vented, and tinted window.
- Doors include a locking swing handle compatible with electronic locking handles.
- The ready-to-assemble self-squaring cabinet body is constructed in 16-gauge steel and includes vents for optional fans on the cabinet sides.
- Includes two (2) pairs of adjustable depth 10-32 threaded EIA compliant rack rails.
- Both the top and bottom-rear of the cabinet feature a removable conduit knockout 1U panel. The top-rear can be used as a bonus 1U rack mounting point for equipment or rack accessories.
- The front of the cabinet includes at both top and bottom a steel plate. When removed reveals a Decora® compatible mounting point.
- Numerous cable tie-off points are included for front-to-rear cable management.
- Cabinet top includes solid top panel and conduit knockouts for additional cable entry.
- Cabinet base also includes mounting holes for optional casters or levelling feet.
- Both top and cabinet bottom includes an opening compatible with interchangeable “1923” sized top panels.
- Cabinet ganging kit included.
- Includes 50-pack of SCREW1032-50 screws.
Specifications
- Cabinet frame constructed in 16-gauge steel.
- Mounting rails constructed in 12-gauge steel.
- Top-Rear of cabinet included 3.00″, 2.50” and 2.0” knockouts for the conduit.
- Rear 1U panels include 1.375″, 1.125″ and 0.675″ knockouts.
- Include multiple bonding and grounding points.
- Load rated for up to 1,050 lbs (476 kg). Rolling caster load rated for up to 600 lbs (272 kg)
- Finished in textured RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Gallery
Accessories
SKU: RCK24U32BK -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
IT, Security and A/V Rack Cabinet RCK Series – (RCK20U32BK)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondIT, Security and A/V Rack Cabinet RCK Series – (RCK20U32BK)
We designed our new RCK Cabinet series for your Homelab and Pro-AV applications. We’ve included loads of unique features such as bonus rack units, compatibility for standard hardware components, and more. Every RCK is self-squaring and takes just minutes to assemble. In addition, each cabinet has mounting points for our easy four-screw field-installable doors.
Features
- Available in six (6) heights and two (2) depths.
- Optional locking doors are constructed in 16-gauge steel. The door(s) install in minutes and are available in solid, vented, and tinted window.
- Doors include a locking swing handle compatible with electronic locking handles.
- The ready-to-assemble self-squaring cabinet body is constructed in 16-gauge steel and includes vents for optional fans on the cabinet sides.
- Includes two (2) pairs of adjustable depth 10-32 threaded EIA compliant rack rails.
- Both the top and bottom-rear of the cabinet feature a removable conduit knockout 1U panel. The top-rear can be used as a bonus 1U rack mounting point for equipment or rack accessories.
- The front of the cabinet includes at both top and bottom a steel plate. When removed reveals a Decora® compatible mounting point.
- Numerous cable tie-off points are included for front-to-rear cable management.
- Cabinet top includes solid top panel and conduit knockouts for additional cable entry.
- Cabinet base also includes mounting holes for optional casters or levelling feet.
- Both top and cabinet bottom includes an opening compatible with interchangeable “1923” sized top panels.
- Cabinet ganging kit included.
- Includes 50-pack of SCREW1032-50 screws.
Specifications
- Cabinet frame constructed in 16-gauge steel.
- Mounting rails constructed in 12-gauge steel.
- Top-Rear of cabinet included 3.00″, 2.50” and 2.0” knockouts for the conduit.
- Rear 1U panels include 1.375″, 1.125″ and 0.675″ knockouts.
- Include multiple bonding and grounding points.
- Load rated for up to 1,050 lbs (476 kg). Rolling caster load rated for up to 600 lbs (272 kg)
- Finished in textured RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Gallery
Accessories
SKU: RCK20U32BK -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
Test & Measurement Rack Cabinet REFK Series – (REFK1905624BK1)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondTest & Measurement Rack Cabinet REFK Series – (REFK1905624BK1)
Features
- Available in 20U, 24U, 28U, 32U, 36U, 40U and 44U mounting heights.
- Available in 23” overall width (19″ mounting width).
- Available in 17.5″, 24.5″ and 31.5″ overall depths.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Solid non-removable side panels.
- Optional flush mounted doors with quarter-turn lock can be mounted to swing either side.
- Knockdown design ships unassembled for easy handling reduced freight cost and shipping protection.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom.
Specifications
- Cabinet frame constructed in 12-gauge steel.
- Drilled and 10-32 tapped flange 19″ mounting rails are constructed in 10-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Includes four (4) levelling feet.
- Removable gland plate – over 10″ (254 mm) long x 1.5″ (38 mm) high opening – with knockouts on the rear bottom of the rack for easy cable access.
- Load rated for up to 1,000 lbs (454 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
You may also consider our new RCK Series cabinet.
Accessories
Universal Rack Shelf
Adjustable Depth Shelf
Four Post Mounting Sliding Shelf
Rack Mount Locking Storage Drawer
Sliding Keyboard Shelf
Four Post Mounting Zero Space Fixed Shelf
Four Post Fixed Depth Shelf
10-32 Mounting Hardware
PDUs and Outlet Strips
Rack Unit Label
Adjustable Depth Cable Manager
Horizontal Lacing Strip
Horizontal Ring Cable Manager
Horizontal Hinged Cable Manager
Cable Management Arm
Horizontal Steel Finger Cable Manager
Grounding & Bonding
Rack Panels
Light Duty Caster Set
Mounting Rack Rails
Square Hole Punched Mounting Rail
SKU: REFK1905624BK1 -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
Test & Measurement Rack Cabinet REFK Series – (REFK1904231BK1)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondTest & Measurement Rack Cabinet REFK Series – (REFK1904231BK1)
Features
- Available in 20U, 24U, 28U, 32U, 36U, 40U and 44U mounting heights.
- Available in 23” overall width (19″ mounting width).
- Available in 17.5″, 24.5″ and 31.5″ overall depths.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Solid non-removable side panels.
- Optional flush mounted doors with quarter-turn lock can be mounted to swing either side.
- Knockdown design ships unassembled for easy handling reduced freight cost and shipping protection.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom.
Specifications
- Cabinet frame constructed in 12-gauge steel.
- Drilled and 10-32 tapped flange 19″ mounting rails are constructed in 10-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Includes four (4) levelling feet.
- Removable gland plate – over 10″ (254 mm) long x 1.5″ (38 mm) high opening – with knockouts on the rear bottom of the rack for easy cable access.
- Load rated for up to 1,000 lbs (454 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
You may also consider our new RCK Series cabinet.
Accessories
Universal Rack Shelf
Adjustable Depth Shelf
Four Post Mounting Sliding Shelf
Rack Mount Locking Storage Drawer
Sliding Keyboard Shelf
Four Post Mounting Zero Space Fixed Shelf
Four Post Fixed Depth Shelf
10-32 Mounting Hardware
PDUs and Outlet Strips
Rack Unit Label
Adjustable Depth Cable Manager
Horizontal Lacing Strip
Horizontal Ring Cable Manager
Horizontal Hinged Cable Manager
Cable Management Arm
Horizontal Steel Finger Cable Manager
Grounding & Bonding
Rack Panels
Light Duty Caster Set
Mounting Rack Rails
Square Hole Punched Mounting Rail
SKU: REFK1904231BK1 -
Unassembled, Rack Mounting Solutions, Server Racks and Cabinets, Hammond
IT, Security and A/V Rack Cabinet RCK Series – (RCK20U25BK)
Unassembled, Rack Mounting Solutions, Server Racks and Cabinets, HammondIT, Security and A/V Rack Cabinet RCK Series – (RCK20U25BK)
We designed our new RCK Cabinet series for your Homelab and Pro-AV applications. We’ve included loads of unique features such as bonus rack units, compatibility for standard hardware components, and more. Every RCK is self-squaring and takes just minutes to assemble. In addition, each cabinet has mounting points for our easy four-screw field-installable doors.
Features
- Available in six (6) heights and two (2) depths.
- Optional locking doors are constructed in 16-gauge steel. The door(s) install in minutes and are available in solid, vented, and tinted window.
- Doors include a locking swing handle compatible with electronic locking handles.
- The ready-to-assemble self-squaring cabinet body is constructed in 16-gauge steel and includes vents for optional fans on the cabinet sides.
- Includes two (2) pairs of adjustable depth 10-32 threaded EIA compliant rack rails.
- Both the top and bottom-rear of the cabinet feature a removable conduit knockout 1U panel. The top-rear can be used as a bonus 1U rack mounting point for equipment or rack accessories.
- The front of the cabinet includes at both top and bottom a steel plate. When removed reveals a Decora® compatible mounting point.
- Numerous cable tie-off points are included for front-to-rear cable management.
- Cabinet top includes solid top panel and conduit knockouts for additional cable entry.
- Cabinet base also includes mounting holes for optional casters or levelling feet.
- Both top and cabinet bottom includes an opening compatible with interchangeable “1923” sized top panels.
- Cabinet ganging kit included.
- Includes 50-pack of SCREW1032-50 screws.
Specifications
- Cabinet frame constructed in 16-gauge steel.
- Mounting rails constructed in 12-gauge steel.
- Top-Rear of cabinet included 3.00″, 2.50” and 2.0” knockouts for the conduit.
- Rear 1U panels include 1.375″, 1.125″ and 0.675″ knockouts.
- Include multiple bonding and grounding points.
- Load rated for up to 1,050 lbs (476 kg). Rolling caster load rated for up to 600 lbs (272 kg)
- Finished in textured RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Gallery
Accessories
SKU: RCK20U25BK -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
Test & Measurement Rack Cabinet RCH Series – (RCK18U32BK)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondTest & Measurement Rack Cabinet RCH Series – (RCK18U32BK)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: RCK18U32BK -
Unassembled, Rack Mounting Solutions, Server Racks and Cabinets, Hammond
Test & Measurement Rack Cabinet REFK Series – (REFK1903531LG1)
Unassembled, Rack Mounting Solutions, Server Racks and Cabinets, HammondTest & Measurement Rack Cabinet REFK Series – (REFK1903531LG1)
Features
- Available in 20U, 24U, 28U, 32U, 36U, 40U and 44U mounting heights.
- Available in 23” overall width (19″ mounting width).
- Available in 17.5″, 24.5″ and 31.5″ overall depths.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Solid non-removable side panels.
- Optional flush mounted doors with quarter-turn lock can be mounted to swing either side.
- Knockdown design ships unassembled for easy handling reduced freight cost and shipping protection.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom.
Specifications
- Cabinet frame constructed in 12-gauge steel.
- Drilled and 10-32 tapped flange 19″ mounting rails are constructed in 10-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Includes four (4) levelling feet.
- Removable gland plate – over 10″ (254 mm) long x 1.5″ (38 mm) high opening – with knockouts on the rear bottom of the rack for easy cable access.
- Load rated for up to 1,000 lbs (454 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
You may also consider our new RCK Series cabinet.
Accessories
Universal Rack Shelf
Adjustable Depth Shelf
Four Post Mounting Sliding Shelf
Rack Mount Locking Storage Drawer
Sliding Keyboard Shelf
Four Post Mounting Zero Space Fixed Shelf
Four Post Fixed Depth Shelf
10-32 Mounting Hardware
PDUs and Outlet Strips
Rack Unit Label
Adjustable Depth Cable Manager
Horizontal Lacing Strip
Horizontal Ring Cable Manager
Horizontal Hinged Cable Manager
Cable Management Arm
Horizontal Steel Finger Cable Manager
Grounding & Bonding
Rack Panels
Light Duty Caster Set
Mounting Rack Rails
Square Hole Punched Mounting Rail
SKU: REFK1903531LG1 -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
Test & Measurement Rack Cabinet REFK Series – (REFK1903531BK1)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondTest & Measurement Rack Cabinet REFK Series – (REFK1903531BK1)
Features
- Available in 20U, 24U, 28U, 32U, 36U, 40U and 44U mounting heights.
- Available in 23” overall width (19″ mounting width).
- Available in 17.5″, 24.5″ and 31.5″ overall depths.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Solid non-removable side panels.
- Optional flush mounted doors with quarter-turn lock can be mounted to swing either side.
- Knockdown design ships unassembled for easy handling reduced freight cost and shipping protection.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom.
Specifications
- Cabinet frame constructed in 12-gauge steel.
- Drilled and 10-32 tapped flange 19″ mounting rails are constructed in 10-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Includes four (4) levelling feet.
- Removable gland plate – over 10″ (254 mm) long x 1.5″ (38 mm) high opening – with knockouts on the rear bottom of the rack for easy cable access.
- Load rated for up to 1,000 lbs (454 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
You may also consider our new RCK Series cabinet.
Accessories
Universal Rack Shelf
Adjustable Depth Shelf
Four Post Mounting Sliding Shelf
Rack Mount Locking Storage Drawer
Sliding Keyboard Shelf
Four Post Mounting Zero Space Fixed Shelf
Four Post Fixed Depth Shelf
10-32 Mounting Hardware
PDUs and Outlet Strips
Rack Unit Label
Adjustable Depth Cable Manager
Horizontal Lacing Strip
Horizontal Ring Cable Manager
Horizontal Hinged Cable Manager
Cable Management Arm
Horizontal Steel Finger Cable Manager
Grounding & Bonding
Rack Panels
Light Duty Caster Set
Mounting Rack Rails
Square Hole Punched Mounting Rail
SKU: REFK1903531BK1 -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
Test & Measurement Rack Cabinet REFK Series – (REFK1904224LG1)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondTest & Measurement Rack Cabinet REFK Series – (REFK1904224LG1)
Features
- Available in 20U, 24U, 28U, 32U, 36U, 40U and 44U mounting heights.
- Available in 23” overall width (19″ mounting width).
- Available in 17.5″, 24.5″ and 31.5″ overall depths.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Solid non-removable side panels.
- Optional flush mounted doors with quarter-turn lock can be mounted to swing either side.
- Knockdown design ships unassembled for easy handling reduced freight cost and shipping protection.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom.
Specifications
- Cabinet frame constructed in 12-gauge steel.
- Drilled and 10-32 tapped flange 19″ mounting rails are constructed in 10-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Includes four (4) levelling feet.
- Removable gland plate – over 10″ (254 mm) long x 1.5″ (38 mm) high opening – with knockouts on the rear bottom of the rack for easy cable access.
- Load rated for up to 1,000 lbs (454 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
You may also consider our new RCK Series cabinet.
Accessories
Universal Rack Shelf
Adjustable Depth Shelf
Four Post Mounting Sliding Shelf
Rack Mount Locking Storage Drawer
Sliding Keyboard Shelf
Four Post Mounting Zero Space Fixed Shelf
Four Post Fixed Depth Shelf
10-32 Mounting Hardware
PDUs and Outlet Strips
Rack Unit Label
Adjustable Depth Cable Manager
Horizontal Lacing Strip
Horizontal Ring Cable Manager
Horizontal Hinged Cable Manager
Cable Management Arm
Horizontal Steel Finger Cable Manager
Grounding & Bonding
Rack Panels
Light Duty Caster Set
Mounting Rack Rails
Square Hole Punched Mounting Rail
SKU: REFK1904224LG1 -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
Test & Measurement Rack Cabinet REFK Series – (REFK1904224BK1)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondTest & Measurement Rack Cabinet REFK Series – (REFK1904224BK1)
Features
- Available in 20U, 24U, 28U, 32U, 36U, 40U and 44U mounting heights.
- Available in 23” overall width (19″ mounting width).
- Available in 17.5″, 24.5″ and 31.5″ overall depths.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Solid non-removable side panels.
- Optional flush mounted doors with quarter-turn lock can be mounted to swing either side.
- Knockdown design ships unassembled for easy handling reduced freight cost and shipping protection.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom.
Specifications
- Cabinet frame constructed in 12-gauge steel.
- Drilled and 10-32 tapped flange 19″ mounting rails are constructed in 10-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Includes four (4) levelling feet.
- Removable gland plate – over 10″ (254 mm) long x 1.5″ (38 mm) high opening – with knockouts on the rear bottom of the rack for easy cable access.
- Load rated for up to 1,000 lbs (454 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
You may also consider our new RCK Series cabinet.
Accessories
Universal Rack Shelf
Adjustable Depth Shelf
Four Post Mounting Sliding Shelf
Rack Mount Locking Storage Drawer
Sliding Keyboard Shelf
Four Post Mounting Zero Space Fixed Shelf
Four Post Fixed Depth Shelf
10-32 Mounting Hardware
PDUs and Outlet Strips
Rack Unit Label
Adjustable Depth Cable Manager
Horizontal Lacing Strip
Horizontal Ring Cable Manager
Horizontal Hinged Cable Manager
Cable Management Arm
Horizontal Steel Finger Cable Manager
Grounding & Bonding
Rack Panels
Light Duty Caster Set
Mounting Rack Rails
Square Hole Punched Mounting Rail
SKU: REFK1904224BK1 -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
Test & Measurement Rack Cabinet RCH Series – (RCK12U32BK)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondTest & Measurement Rack Cabinet RCH Series – (RCK12U32BK)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: RCK12U32BK -
Server Racks and Cabinets, Unassembled, Rack Mounting Solutions, Hammond
Test & Measurement Rack Cabinet REFK Series – (REFK1903524LG1)
Server Racks and Cabinets, Unassembled, Rack Mounting Solutions, HammondTest & Measurement Rack Cabinet REFK Series – (REFK1903524LG1)
Features
- Available in 20U, 24U, 28U, 32U, 36U, 40U and 44U mounting heights.
- Available in 23” overall width (19″ mounting width).
- Available in 17.5″, 24.5″ and 31.5″ overall depths.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Solid non-removable side panels.
- Optional flush mounted doors with quarter-turn lock can be mounted to swing either side.
- Knockdown design ships unassembled for easy handling reduced freight cost and shipping protection.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom.
Specifications
- Cabinet frame constructed in 12-gauge steel.
- Drilled and 10-32 tapped flange 19″ mounting rails are constructed in 10-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Includes four (4) levelling feet.
- Removable gland plate – over 10″ (254 mm) long x 1.5″ (38 mm) high opening – with knockouts on the rear bottom of the rack for easy cable access.
- Load rated for up to 1,000 lbs (454 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
You may also consider our new RCK Series cabinet.
Accessories
Universal Rack Shelf
Adjustable Depth Shelf
Four Post Mounting Sliding Shelf
Rack Mount Locking Storage Drawer
Sliding Keyboard Shelf
Four Post Mounting Zero Space Fixed Shelf
Four Post Fixed Depth Shelf
10-32 Mounting Hardware
PDUs and Outlet Strips
Rack Unit Label
Adjustable Depth Cable Manager
Horizontal Lacing Strip
Horizontal Ring Cable Manager
Horizontal Hinged Cable Manager
Cable Management Arm
Horizontal Steel Finger Cable Manager
Grounding & Bonding
Rack Panels
Light Duty Caster Set
Mounting Rack Rails
Square Hole Punched Mounting Rail
SKU: REFK1903524LG1 -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
Test & Measurement Rack Cabinet REFK Series – (REFK1903524BK1)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondTest & Measurement Rack Cabinet REFK Series – (REFK1903524BK1)
Features
- Available in 20U, 24U, 28U, 32U, 36U, 40U and 44U mounting heights.
- Available in 23” overall width (19″ mounting width).
- Available in 17.5″, 24.5″ and 31.5″ overall depths.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Solid non-removable side panels.
- Optional flush mounted doors with quarter-turn lock can be mounted to swing either side.
- Knockdown design ships unassembled for easy handling reduced freight cost and shipping protection.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom.
Specifications
- Cabinet frame constructed in 12-gauge steel.
- Drilled and 10-32 tapped flange 19″ mounting rails are constructed in 10-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Includes four (4) levelling feet.
- Removable gland plate – over 10″ (254 mm) long x 1.5″ (38 mm) high opening – with knockouts on the rear bottom of the rack for easy cable access.
- Load rated for up to 1,000 lbs (454 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
You may also consider our new RCK Series cabinet.
Accessories
Universal Rack Shelf
Adjustable Depth Shelf
Four Post Mounting Sliding Shelf
Rack Mount Locking Storage Drawer
Sliding Keyboard Shelf
Four Post Mounting Zero Space Fixed Shelf
Four Post Fixed Depth Shelf
10-32 Mounting Hardware
PDUs and Outlet Strips
Rack Unit Label
Adjustable Depth Cable Manager
Horizontal Lacing Strip
Horizontal Ring Cable Manager
Horizontal Hinged Cable Manager
Cable Management Arm
Horizontal Steel Finger Cable Manager
Grounding & Bonding
Rack Panels
Light Duty Caster Set
Mounting Rack Rails
Square Hole Punched Mounting Rail
SKU: REFK1903524BK1 -
Server Racks and Cabinets, Unassembled, Rack Mounting Solutions, Hammond
Test & Measurement Rack Cabinet RCH Series – (RCK12U25BK)
Server Racks and Cabinets, Unassembled, Rack Mounting Solutions, HammondTest & Measurement Rack Cabinet RCH Series – (RCK12U25BK)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: RCK12U25BK -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
Server Rack Cabinet RCSC Series – (RCSC1902136BK1)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondServer Rack Cabinet RCSC Series – (RCSC1902136BK1)
Ideal for your AV, IT/Server and Homelab applications, the RCSC Rack Cabinet features a stacking design that allows for up to three (3) cabinets* to be stacked atop each other. This Rack Cabinet is fully loaded and includes two (2) pairs of infinitely adjustable sliding EIA square-hole rails, punch-outs for cable entry and/or fan cooling and comes in a variety of sizes and depths.
The unique stacking feature enables your cabinet space to grow as your needs do. *Stack up to three (3) 12U, two (2) 24U or one (1) of each cabinet atop each other using the required RCSCBAY baying kit. The 12U cabinet is a great starter cabinet for any small to medium-sized business.
Features:
- Constructed in 16-gauge steel.
- Includes two (2) pairs of infinitely adjustable 19” EIA compliant square-hole mounting rails with rack unit markings.
- Starter pack of CAGKIT1032-25 screws and cage nuts included with 12U units.
- Starter pack of CAGKIT1032-50 screws and cage nuts included with 24U units.
- Four (4) embosses are included with support for optional levelling feet or casters.
- Grounding studs are provided on the body.
- The top and bottom of the RCSC include two (2) laser knockouts (per side) for cable-entry or fans (includes gasket strip material).
- Includes a laser knockout rear gland plate for floor-level cable entry.
- Ships unassembled in a flat pack container for easy handling and shipping protection.
Specifications:
- Mounting rails are infinitely adjustable in-depth and are fabricated of heavy-duty 14-gauge steel, painted smooth black.
- Optional doors are available in solid, tinted acrylic with venting (see above-left) and high airflow vented.
- Snap-in hinges can be mounted without having to bolt on from inside the cabinet. In addition, the hinges can be mounted on the left or right.
- High airflow perforated doors for both the front and rear of the cabinet are suggested for most server applications.
- Perforated doors meet server manufacturer Free-Air-Ratio (FAR) requirements at 63%.
- For 36” depth cabinet side panels include cable entry knockouts.
- Tested to nearly double the suggested load rating of 1,500 lbs (680 kg).
- Finished in textured RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Gallery
Accessories
Universal Rack Shelf
Adjustable Depth Shelf
Rack Mount Locking Storage Drawer
Four Post Mounting Sliding Shelf
Sliding Keyboard Shelf
Mounting Screw and Cage Nut Combo-Pack
PDUs and Outlet Strips
Rack Unit Label
Adjustable Depth Cable Manager
Horizontal Lacing Strip
Horizontal Hinged Cable Manager
Horizontal Ring Cable Manager
Horizontal Steel Finger Cable Manager
Rack Panels
Cabinet Caster Set
Grounding & Bonding
Leveling Feet
Fan Kits
SKU: RCSC1902136BK1 -
Server Racks and Cabinets, Unassembled, Rack Mounting Solutions, Hammond
Test & Measurement Rack Cabinet RCH Series – (RCHV1902831LG1)
Server Racks and Cabinets, Unassembled, Rack Mounting Solutions, HammondTest & Measurement Rack Cabinet RCH Series – (RCHV1902831LG1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: RCHV1902831LG1 -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
Test & Measurement Rack Cabinet RCH Series – (RCHS1902831LG1)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondTest & Measurement Rack Cabinet RCH Series – (RCHS1902831LG1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: RCHS1902831LG1 -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
Test & Measurement Rack Cabinet RCH Series – (RCHV1902831BK1)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondTest & Measurement Rack Cabinet RCH Series – (RCHV1902831BK1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: RCHV1902831BK1 -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
Test & Measurement Rack Cabinet RCH Series – (RCHS1902831BK1)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondTest & Measurement Rack Cabinet RCH Series – (RCHS1902831BK1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: RCHS1902831BK1 -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
Test & Measurement Rack Cabinet RCH Series – (RCHS1902231LG1)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondTest & Measurement Rack Cabinet RCH Series – (RCHS1902231LG1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: RCHS1902231LG1