Shop By Brand
InnerDuct Accessories, Couplers, InnerDuct
1.25″ Aluminum Threaded Coupler – DuraLine
*Please note there may be minimums requirements for all types of innerduct
Reverse-threaded aluminum coupler. Tapered threads accommodate a wide range of conduit OD’s within a given conduit size. Also available in a Riser/Plenum rated version.
Call for Price
Compare
Reverse-threaded aluminum coupler. Tapered threads accommodate a wide range of conduit OD’s within a given conduit size. Also available in a Riser/Plenum rated version.
FEATURES
- Wide tolerance to fit most conduits
- Easy to install
- Not air-tight or water-tight
- Threads may reduce conduit ID
- Self-threading, which draws each end of the conduit into the center of the coupler
- The Riser/Plenum versions are approved for use in both Riser and Plenum applications – Riser UL 1666 & Plenum UL 2024
| Weight | 0.3 lbs |
|---|
Related products
-
Conduit, Standard HDPE, NEMA TC7, DuraLine, InnerDuct
NEMA TC7 Standard HDPE – 1” EPEC 11 – Dura-Line Conduit/InnerDuct
Conduit, Standard HDPE, NEMA TC7, DuraLine, InnerDuctNEMA TC7 Standard HDPE – 1” EPEC 11 – Dura-Line Conduit/InnerDuct
*Please note there may be minimums requirements for all types of innerduct
Our HDPE conduit made in accordance with requirements of NEMA TC-7 and is ideal for the installation and protection of electrical cables underground.SKU: DL-SHDPE-NEMATC7-1-EPEC-11 -
InnerDuct Accessories, Couplers, InnerDuct
2.00″ Shur-Lock II Coupler-Extended SDR 2.375″ (8.25″ long vs 5.75″ standard) – Dura-Line
InnerDuct Accessories, Couplers, InnerDuct2.00″ Shur-Lock II Coupler-Extended SDR 2.375″ (8.25″ long vs 5.75″ standard) – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000264 -
Pull Tape, InnerDuct Accessories, InnerDuct
Bull-Line Polyester Pull Tape WP05 3000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line 100% Polyester Pull Tape provides a competitive solution for applications that require a high tensile strength and low elongation. Bull-Line Pull Tape is lightweight and has good blowability. Bull-Line Pull Tape has low burn through resistance in comparison to other brands. An added benefit of all Bull-Line Pull Tapes are the durable print and sequential markings, in both feet or meters, for accurate locating during installation. Bull-Line Pull Tape is made in the USA.SKU: 20000044 -
InnerDuct Accessories, Couplers, InnerDuct
1.25″ Shur-Lock II Coupler HYB 1.590″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000121
