Shop By Brand
InnerDuct Accessories, Micro, Gas Block Connectors, InnerDuct
12mm Gas Block Connector – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Gas Block Connectors provide a simple and effective gas seal between the MicroDuct and the fiber cable to prevent gas, water, or moisture from entering the duct. The connector creates a seal around the installed cable.
Call for Price
Compare
Gas Block Connectors provide a simple and effective gas seal between the MicroDuct and the fiber cable to prevent gas, water, or moisture from entering the duct. The connector creates a seal around the installed cable.
FEATURES
- Available for 5mm – 18mm Microducts
- Each size accommodates a range of different fiber cable OD’s
| Weight | 5 lbs |
|---|
Related products
-
InnerDuct Accessories, Pull Tape, InnerDuct
Bull-Line Aramid Woven Pull Tape WK18 1000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line Aramid Pull Tape offers the highest tensile strength per widths along with low elongation. These tapes are also sequentially marked in feet or meters for accurate installation measurements. Bull-Line Aramid Pull Tape is made in the USA.SKU: 20000132 -
InnerDuct Accessories, Pull Tape, InnerDuct
Bull-Line Polyester Pull Tape WP05 10000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line 100% Polyester Pull Tape provides a competitive solution for applications that require a high tensile strength and low elongation. Bull-Line Pull Tape is lightweight and has good blowability. Bull-Line Pull Tape has low burn through resistance in comparison to other brands. An added benefit of all Bull-Line Pull Tapes are the durable print and sequential markings, in both feet or meters, for accurate locating during installation. Bull-Line Pull Tape is made in the USA.SKU: 20000043 -
InnerDuct Accessories, Couplers, InnerDuct
4.00″ Shur-Lock II Coupler SDR 4.500″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000245 -
Conduit, Standard HDPE, NEMA TC7, DuraLine, InnerDuct
NEMA TC7 Standard HDPE – 1/2” EPEC 11 – Dura-Line Conduit/InnerDuct
Conduit, Standard HDPE, NEMA TC7, DuraLine, InnerDuctNEMA TC7 Standard HDPE – 1/2” EPEC 11 – Dura-Line Conduit/InnerDuct
*Please note there may be minimums requirements for all types of innerduct
Our HDPE conduit made in accordance with requirements of NEMA TC-7 and is ideal for the installation and protection of electrical cables underground.SKU: DL-SHDPE-NEMATC7-1/2-EPEC-11
