Shop By Brand
Data Cabinets and Racks
37U LINIER® Server Cabinet Vertical Rail Kit – Cage Nut
The LINIER® 37U Vertical Kit gives installers the ability to integrate additional cage nut style mounting rails into a LINIER® Full Size Server Cabinet. When installing network, security, or low-voltage electrical equipment sometimes additional mounting points are required. This additional set of rails will provide the added mounting functionality you need.
- Fully adjustable
- Includes two 327U cage nut style rails
- Can be used with the LINIER® Full Size Server Cabinets
- Installation hardware included
- Made in the USA
- 5-Year Limited Warranty
$131.25
Compare
37U LINIER® Server Cabinet Vertical Rail Kit – Cage Nut
Features
| Cage Nut Style Rails | This set of universal cage nut rails are to be used in conjunction with rack screws and cage nuts. Cage nut style rails continue to grow in popularity because installers don’t have to worry about stripping holes. If a cage nut is stripped, you simply remove it and install a new one. With tapped rails, replacement of the entire rail is required. |
|---|
Specifications
| Part Number | 3160-3-001-37 |
| Width | 0.912″ |
| Depth | 2″ |
| Height | 64.75″ |
| Weight | 9.50 lbs. |
| Shipping Dimensions | 74″ L x 4″ W x 4″ H |
| Material(s) | CRS (Cold Rolled Steel) |
| Color/Finish | Black Powder Coated Finish |
| UPC | 879447003239 |
| Warranty | 5-Year Limited Warranty |
What’s In the Box?
- Qty 2 – 37U Vertical Rails
- Qty 1 – Assembly Parts Pack
Related products
-
Data Cabinets and Racks
Caster Base
The LINIER® Caster Base provides a sturdy, mobile base that is suited to be used with any of the LINIER® Fixed Wall Mount Cabinets. The low profile base assembles in less than five minutes and adds only 2.9″ in height to your cabinet. Whether you need a compact rolling cabinet to fit under a desk, or you’re short on space and don’t want to wall mount the unit, the LINIER® Caster Base in conjunction with a LINIER® Fixed Wall Mount Cabinet provides a cost-conscious, mobile solution.
- To be used with the LINIER® Fixed Wall Mount Cabinets
- 250 lb. weight capacity
- Easy to assemble
- Made in the USA
- 5-Year Limited Warranty
SKU: 3140-3-001-01 -
Data Cabinets and Racks
4-Piece Rack Conversion Kit
The Kendall Howard 4-Piece Conversion Kit is one of the handiest bracing systems on the market today. Not only do conversion kits anchor a 2-post rack to the wall, but they also limit the risk of the rack tipping over. The 4-Piece Conversion Kit allows you to also upgrade any 2-post rack to a 4-post rack with an adjustable depth of 24 – 40″. If you have to move or replace the rack, the conversion kit will help keep repair costs low because patching holes typically costs significantly less than removing anchors. Whether anchoring two racks together or bracing them to the wall, the 4-Piece Conversion Kit provides a safe and dependable solution.
- Provides added support to a 2-post rack
- Creates a 4-post rack with two 2-post racks
- Adjustable from 20″ to 35″
- Mounting hardware not included
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
SKU: 1927-3-004-00 -
Wall Mount, Rack Mount, Data Cabinets and Racks, Fiber Optic Enclosures
LAN Station LCD Monitor Mount
Wall Mount, Rack Mount, Data Cabinets and Racks, Fiber Optic EnclosuresLAN Station LCD Monitor Mount
Kendall Howard LAN Station LCD Monitor Mounts make it simple to mount LCD monitors to any Kendall Howard Performance Series® Accessory Bar. They are designed to easily mount any VESA compliant monitor up to a 22″ widescreen. The Kendall Howard LAN Station LCD Monitor Mount easily pivots left to right, and allows the user to adjust the tilt up to 40 degrees up or down, depending on the size of the monitor.
- 360 degrees of swivel (portrait to landscape)
- Up to 40 degrees of tilt (varies depending on monitor size)
- 75mm and 100mm VESA compliant mounting pattern
- 40 lb. maximum load or LCDs up to 22″
- Made in the USA
- Limited Lifetime Warranty
SKU: 5200-3-510-00 -
Data Cabinets and Racks
37U LINIER® Server Cabinet Vertical Rail Kit – 10-32 Tapped
The LINIER® 37U Server Cabinet Vertical Rail Kit can be installed in any of the LINIER® Full Size Cabinets to provide a 10-32 tapped rail solution. This tapped rail kit can replace the cage nut style rails that are included with the LINIER® Server Cabinets for installers who prefer a tapped rail mounting solution.
- Fully adjustable
- Includes two 37U 10-32 tapped rails
- Can be used with the LINIER® Full Size Server Cabinets
- Installation hardware included
- Made in the USA
- 5-Year Limited Warranty
SKU: 3160-3-002-37
