Shop By Brand
Data Cabinets and Racks
4-Piece Rack Conversion Kit
The Kendall Howard 4-Piece Conversion Kit is one of the handiest bracing systems on the market today. Not only do conversion kits anchor a 2-post rack to the wall, but they also limit the risk of the rack tipping over. The 4-Piece Conversion Kit allows you to also upgrade any 2-post rack to a 4-post rack with an adjustable depth of 24 – 40″. If you have to move or replace the rack, the conversion kit will help keep repair costs low because patching holes typically costs significantly less than removing anchors. Whether anchoring two racks together or bracing them to the wall, the 4-Piece Conversion Kit provides a safe and dependable solution.
- Provides added support to a 2-post rack
- Creates a 4-post rack with two 2-post racks
- Adjustable from 20″ to 35″
- Mounting hardware not included
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
$115.50
Compare
4-Piece Rack Conversion Kit
Features
| Adjustable Depth | Each support bracket can adjust from 20″ to 35″ deep to suit your particular installation requirements. |
|---|---|
| Added Support | This easy to use bracket system adds strength and stability to any 2-post rack and it will convert two 2-post racks into one 4-post rack. |
| Cable Lacing Available | These horizontal brackets provide a great option for securing heavy and obtrusive trunk cabling up and out of the way. |
| Only Uses 2U of Space | The support braces mount directly on to the vertical rack rails with standard rack hardware. Each brace requires only 2U of rack space leaving you plenty of room for your network, A/V, and other rackmount equipment. |
Specifications
| Part Number | 1927-3-004-00 |
| Width | 1″ |
| Depth | Adjustable 20″ – 35″ |
| Height | 4″ |
| Weight | 13.50 lbs. |
| Shipping Dimensions | 21″ L x 7″ W x 7″ H |
| Material(s) | CRS (Cold Rolled Steel) |
| Color/Finish | Black Powder Coated Finish |
| UPC | 879447000429 |
| Warranty | Limited Lifetime Warranty |
What’s In the Box?
- Qty 4 – Conversion Kit Left Arms
- Qty 4 – Conversion Kit Right Arms
- Qty 4 – Conversion Kit Center Arms
- Qty 1 – Assembly Parts Pack
Related products
-
Data Cabinets and Racks
37U LINIER® Server Cabinet Vertical Rail Kit – Cage Nut
The LINIER® 37U Vertical Kit gives installers the ability to integrate additional cage nut style mounting rails into a LINIER® Full Size Server Cabinet. When installing network, security, or low-voltage electrical equipment sometimes additional mounting points are required. This additional set of rails will provide the added mounting functionality you need.
- Fully adjustable
- Includes two 327U cage nut style rails
- Can be used with the LINIER® Full Size Server Cabinets
- Installation hardware included
- Made in the USA
- 5-Year Limited Warranty
SKU: 3160-3-001-37 -
Data Cabinets and Racks
1U 12″ Component Shelf – 2 pack
The Kendall Howard 1U 12″ Component Shelf takes on a lot of weight for its size. Rated to hold up to 70 lbs., this tough little shelf is perfect for supporting non-rack mountable equipment such as routers, hubs, monitors, and UPS’s.
- Two pack
- 12″ depth
- 19″ EIA compliant
- 70 lb. weight capacity
- Made in the USA
- Limited Lifetime Warranty
SKU: 1906-3-201-01 -
Data Cabinets and Racks
Training Table Keyboard Tray
The Training Table Keyboard Tray provides users a convenient and comfortable solution to access their keyboard. As a bonus, the sliding rail design allows the keyboard tray to be turned upside down and then used as a small drawer. The training table work surface features all pre-drilled and pre-threaded holes for a fast and easy installation.
- Compatible with all sizes of the Advanced Classroom Training Table Collection
- 36″/48″ Training Tables accept one Keyboard Tray
- 60″/72″ Training Tables accept two Keyboard Trays
- Installation hardware included
- Made in the USA
- Limited Lifetime Warranty
SKU: 5500-3-100-02 -
Cable Management, Cable Tray, Data Cabinets and Racks
5″ D Flanged Lacing Bar – 10 pack
Properly manage and protect your cables with the Kendall Howard 5″ D Flanged Lacing Bar. Its size and versatility makes this a true space saving cable manager. Designed to mount above, below, behind, or in front of your network devices, the 5″ D Flanged Lacing Bar allows you to do more by using less space. And that’s not all. It also provides a much needed stress relief for cable connections. Crowded spaces, unorganized cables, and strained connections are no longer an issue with the Kendall Howard 5″ D Flanged Lacing Bar.
- Quantity: 10
- 5″ depth
- Features ½” slots to use with any ½” cable ties
- Uses less than one U space, or none at all if mounted in front of or behind equipment
- Versatile, horizontal mounting
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
SKU: 1903-1-112-00
