48-Port 75 Ohm BNC Feed-Thru Patch Panel, 2 RMU

Key Features

• Meets EIA/ECA-310-E 19″ mounting standards
• Feed-thru bronze shell with 75 Ohm 1 or 3 GHz transmission performance
• Connectors & Panel are galvanically isolated to eliminate stray currents
• Intergrated for removable rear cable management bar

Specifications

• CONSTRUCTION

Panel:
     Front: Steel with corrosive resistant black finish
     Rear: Steel
Cable management bar: Thermoplastic with steel brackets

• MOUNTING DIMENSIONS

Panel: 19-in rack mountable
Depth:
Management Bar Installed: 6.0” (153 mm)
Management Bar Uninstalled: 1.5” (38 mm)
Height:
24FHD-FT: 1 RMU (1.75” (44.45 mm))
48FHD-FT: 2 RMU (3.50” (88.90 mm))
24F3HD-FT: 1 RMU (1.75” (44.45 mm))
48F3HD-FT: 2 RMU (3.50” (88.90 mm))

12F-FT: 1 RMU (1.75” (44.45 mm))
16F-FT: 1 RMU (1.75” (44.45 mm))
24F-FT: 2 RMU (3.50” (88.90 mm))
32F-FT: 2 RMU (3.50” (88.90 mm))
48F-FT: 3 RMU (5.25” (133.35mm))

12F3-FT: 1 RMU (1.75” (44.45 mm))
16F3-FT: 1 RMU (1.75” (44.45 mm))
24F3-FT: 2 RMU (3.50” (88.90 mm))
32F3-FT: 2 RMU (3.50” (88.90 mm))
48F3-FT: 3 RMU (5.25” (133.35mm))

F-Type Connector:
D:30.0 mm H:19.7 mm W:16.5 mm (D:1.18 in H:0.77 in W:0.65 in)

• TRANSMISSION PERFORMANCE

F: up to 1 MHz
F3: up to 3 MHz

• TRANSMISSION MEDIA

Coaxial, 75 Ohm (RG6/U, RG-58/U)

• WIRE GAUGE

18 AWG–22 AWG (0.64 mm–1.07 mm) solid

• ELECTRICAL

Frequency range:
F: 1 GHz DC
F3: 3 GHz DC

Characteristic impedance: 75 Ohm

Insertion loss: <0.3 dB at 1 GHz
F: <0.3 dB
F3: <0.2 dB

Return loss:
F3: >30 dB

Contact resistance: <4 mOhm
Insulation resistance: min 500 MOhm at 100 Vdc
Inductance: min 500 nH
Capacitance: min 2 × 1.5 nF
Operational voltage: 250 Vdc
Test voltage: 750 Vdc for 1 min
Peak voltage rating: 500 V
Dielectric withstanding voltage: 1 500 Vrms
Feed-through current: max 10 A

• CONSTRUCTION

Housing: high impact thermoplastic, UL94V-0 fire-retardant
Shell: brass, nickel plated

Seizing pin:
F: bronze alloy, tin-plated
F3: 360-degree beryllium bronze, gold-plated

Insulation:
F: low-density polyethylene (LDPE)
F3: nylon

Nut: iron-plated with nickel over copper

• MECHANICAL

Mating cycles: min 500

Holding force:
>160 g (initial)
>120 g (after insertion)

Interface dimensions: similar to MIL-C-39012
Housing shall support 2.2 kgf minimum applied from either direction

• ENVIRONMENTAL CONDITIONS

Storage: -40 °C to +70 °C (-40 °F to +158 °F)
Operation: -10 °C to +60 °C (+14 °F to +140 °F)
RH (operation): max non-condensing 93 %
Vibration, shock, and temperature cycling in accordance with MIL-STD-1344

• COMPLIANCE

ANSI/SCTE 02, IEC 60169-24, UL 94V-0

• APPLICATIONS

Over-the-air terrestrial television, cable television, satellite television, cable modems

• WARRANTY

 5-year Limited Component