Shop By Brand
MicroDucts, FuturePath Riser, InnerDuct
FuturePath Riser – 19-Way 8.5/6mm – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Minimums may be required.
Call for Price
Compare
FuturePath Riser rated products are used within buildings in either vertical or horizontal backbone applications or directly to workstations as drops. FuturePath Riser is fully approved by the American ETL (Electrical Testing Laboratories) for Riser applications per UL-2024 and UL-94-V2
FEATURES
- MicroDucts available from 5mm to 12.7mm and factory bundled with an oversheath
- Configurations: 24-way, 19-way, 12-way, 7-way, 4-way, 3-way or 2-way
- Multiple pathways in place for future growth
- Cost-Effective: multiple pathways for one installation cost
- No special tools or equipment are required for installation
- ETL Listed to UL/CSA Specifications
DETAILS
- Footage/Meter Markings
- Internal Ribs
- Silicore®
- Rip Cord
| Weight | 0.576 lbs |
|---|---|
| Dimensions | 1 ft |
Related products
-
InnerDuct Accessories, Pull Tape, InnerDuct
Bull-Line Polyester Pull Tape WP05 3000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line 100% Polyester Pull Tape provides a competitive solution for applications that require a high tensile strength and low elongation. Bull-Line Pull Tape is lightweight and has good blowability. Bull-Line Pull Tape has low burn through resistance in comparison to other brands. An added benefit of all Bull-Line Pull Tapes are the durable print and sequential markings, in both feet or meters, for accurate locating during installation. Bull-Line Pull Tape is made in the USA.SKU: 20000044 -
InnerDuct Accessories, Couplers, InnerDuct
2.00″ Shur-Lock II Coupler-Extended SDR 2.375″ (8.25″ long vs 5.75″ standard) – Dura-Line
InnerDuct Accessories, Couplers, InnerDuct2.00″ Shur-Lock II Coupler-Extended SDR 2.375″ (8.25″ long vs 5.75″ standard) – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000264 -
InnerDuct Accessories, Pull Tape, InnerDuct
Bull-Line Aramid Woven Pull Tape WK18 5000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line Aramid Pull Tape offers the highest tensile strength per widths along with low elongation. These tapes are also sequentially marked in feet or meters for accurate installation measurements. Bull-Line Aramid Pull Tape is made in the USA.SKU: 20002173 -
InnerDuct Accessories, Couplers, InnerDuct
2.50″ Shur-Lock II Coupler SDR 2.875″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000172
