Shop By Brand
Outdoor Fiber Connectivity, Innerduct and Conduit, PVC Conduit and Bends, Schedule 40 Long Radius Sweeps, InnerDuct
(Part Number: NICSPV000388) – 1-1/2″ X 90 X 36″ SCH40 Belled End PVC Sweep – Outdoor Fiber Connectivity – Innerduct and Conduit – PVC Conduit and Bends – Schedule 40 Long Radius Sweeps –
$9.75
This product requires special shipping arrangements. Please Use the "ADD TO QUOTE BUTTON" or call us at (866) 650-3282 for more information.
Compare
A section of PVC Schedule 40 conduit which as been heated and bent to effect a 90 degree change in direction in a conduit run. A standard conduit bell is formed on one end while the other end is a spigot (plain) end. Both ends are solvent weld.
Cable Diameter Range [in]:
0.157-1.125
Cable Diameter Range [mm]:
4.0-28.6
Height [in]:
3
Length [in]:
60
Width [in]:
20
Shipping Height [in]:
3
Shipping Length [in]:
60
Shipping Method:
Parcel
Shipping Width [in]:
20
Unit of Measure:
EA.
Weight [lb]:
4.000000
Related products
-
InnerDuct Accessories, Couplers, InnerDuct
0.75″ Clear-Lock Coupler – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Experience the same fast and easy installation of our Push-Lock couplers now with a new, clear body design. Simply push the duct ends into the coupler for a locked and air-sealed assembly. Slightly shorter than the original Push-Lock, the Clear-Lock is ideal for pull boxes, vaults or other limited access areas. The non-metallic construction provides excellent corrosion resistance in buried or encased applications and also has desirable dielectric properties.SKU: 20005661 -
Conduit, Standard HDPE, NEMA TC7, DuraLine, InnerDuct
NEMA TC7 Standard HDPE – 1” EPEC 40 – Dura-Line Conduit/InnerDuct
Conduit, Standard HDPE, NEMA TC7, DuraLine, InnerDuctNEMA TC7 Standard HDPE – 1” EPEC 40 – Dura-Line Conduit/InnerDuct
*Please note there may be minimums requirements for all types of innerduct
Our HDPE conduit made in accordance with requirements of NEMA TC-7 and is ideal for the installation and protection of electrical cables underground.SKU: DL-SHDPE-NEMATC7-1-EPEC-40 -
InnerDuct Accessories, Pull Tape, InnerDuct
Bull-Line Aramid Woven Pull Tape WK18 5000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line Aramid Pull Tape offers the highest tensile strength per widths along with low elongation. These tapes are also sequentially marked in feet or meters for accurate installation measurements. Bull-Line Aramid Pull Tape is made in the USA.SKU: 20002173 -
InnerDuct Accessories, Couplers, InnerDuct
1.25″ Shur-Lock II Coupler HYB 1.590″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000121
