(Part Number: NIHAEA000124) – No-Wrench Screw Anchor (6″ Helix – ¾” x 66″ Shaft) – Aerial Materials – Commodity

No-Wrench Screw Anchors may be installed by hand or machine. The forged Triple Eye on the rod has a large opening to admit a turning bar for screwing the anchor down. The eye will also fit into an adapter available from most hole-boring machine manufacturers so the anchor may be power-installed. The entire anchor is hot-dip galvanized for long resistance to rust. Hot Dip Galvanized per ASTM A123.

No-Wrench Screw Anchors can be installed to a greater depth to reach a firmer soil by using an extension rod.

Note: If hand installed, holding capacity may be reduced by as much as 10% to 20%. Capacity ratings apply to properly installed anchors only. Failure to install within 5 degrees of alignment with the guy load will significantly lower strength.

ASTM Specification:
A123

Coating:
Hot Dip Galvanized

Diameter [in]:
0.75

Freight Class:
50

Height [in]:
10

Length [in]:
70

Width [in]:
10

Guy Attachments:
3

Helix Diameter [in]:
6

Helix Diameter [mm]:
152

Holding Strength Class 5 [lb]:
6500

Holding Strength Class 6 [lb]:
5000

Holding Strength Class 7 [lb]:
2500

Item #:
BOLTANCH6X66

Item Name:
6 inch Helix, 3/4 x 66 inch Shaft

Length [in]:
66

Length [mm]:
1676

Package Type:
Each

Pallet Quantity:
100

Rod Diameter [in]:
0.75

Rod Diameter [mm]:
19

Shipping Height [in]:
10

Shipping Length [in]:
70

Shipping Method:
Parcel

Shipping Width [in]:
10

Similar to:
Hubbell Chance 63461, Allied Bolt 1166, J6526WCA

Torque Load Limit [lb]:
400

Type of Handling Units:
PLT

Unit of Measure:
EA.

Units Per Package:
1

Weight [lb]:
12.000000

Weight [kg]:
5

Weight [lb]:
11