(Part Number: NTCPFO000064) – 62″ X 8″ Fiber Optic Capstan – Cable Pulling – Condux International

The continued development and evolution of large count fiber drives the development of larger tooling to accommodate installations without damaging the product.  Condux offers a 62 x 8 Fiber Optic Puller Capstan (08675275) to address minimum bend radius requirements specified by the manufacturers of the larger fiber “ specifically 3456 & 6912 count.  Dependent on the manufacturer, the requirement for selecting a capstan is either 30x or 40x the outside diameter (OD) of the fiber. 

BENEFITS: 

The Condux® FO Puller with 62 Capstan provides several advantages to the installation professional:

• Less damage to product caused by installing with equipment designed for smaller fiber
• Regulated cable tension versus pulling w/backhoe, four-wheeler or snowmobile 
• Typically, lower labor cost compared to hand pulling 
• Meets cable manufacturer specifications “ fewer warranty hassles  
• Less figure 8 downtime (longer deployment lengths “ fewer figure 8™s) 
• Lower installation cost / foot (less labor) 
• Higher contractor margins (less labor)

NOTES: 

• The Condux 62 Capstan is compatible with the Pole Mount Frame (08676000). While this application would be rare, it is possible.  
• The Condux 62 Capstan is compatible with the stationary Fiber Optic Hitch Mount (08675908); however, there must be 17 clearance from ground to bottom of the hitch receiver tube. 
• The Condux 62 Capstan weighs in at 195 lbs. It™s a substantial piece of equipment.

Diameter [in]:
62

Flat Width [in]:
8

Packaging Type:
Boxes

Shaft [in]:
2-7/16 Bayonet Style

Shipping Height [in]:
20

Shipping Length [in]:
65

Shipping Method:
LTL

Shipping Width [in]:
65

Unit of Measure:
EA.

Weight [lb]:
195.000000

Weight [lb]:
195

Width [in]:
8