TheNID Fiber Entry Terminal (FET) Hardened (FPP-TN-T-89)

TheNID is a compact outdoor fiber optic network interface device designed to withstand the harsh conditions of Outside Plant. Designed for flat and round cable entry, the variable clamp entry securely holds both round and flat drop cables. Accepts up to 1-inch conduit. Electrical copper ground lug included.

Construction
Material: High-impact thermoplastic
Color: Light gray
Up to 1-inch conduit entry point with tie-down
Variable cable entry clamp designed for round or flat drop cable (round OD: 3mm to 16.2mm​, flat cable OD: 2mm to 8.1 x 4.5mm)

TheNID – Splice
Datasheet
Technical Drawing

Holds 1 simplex SC, 1 duplex LC, or 1 MTP adapter (can splice up to 2 single fibers or 1 mass fusion)
Slack storage for up to 50 feet of fiber

Included hardware
(2) 40mm splice sleeves, (1) 40mm mass splice sleeve
(1) ½ Velcro strip
(4) 4-inch zip ties
(2) 6-inch zip ties
(4) M4 x 50mm screws and anchors
(1) electrical ground contact
(1) SC APC adapter
Available preloaded with (1) simplex SC (SC APC included), (1) duplex LC, or (1) 12-fiber MPO adapter and corresponding pigtails​

TheNID – LGX
Datasheet
Technical Drawing

Holds (6) SC, (6) duplex LC, or (6) 12-fiber MPO adapters (can splice up to 12 single fibers)

Included hardware
(12) 40mm splice sleeves, (1) 40mm mass splice sleeve
(1) ½ Velcro strip
(4) 4-inch zip ties
(1) Splice chip (12-fiber)
(4) M4 x 50mm screws and anchors
(1) electrical ground contact
Available preloaded with (6) SC, (6) duplex LC, or (6) 12-fiber MPO adapters and corresponding pigtails

TheNID – Patch
Datasheet
Technical Drawing

Holds 1 LGX Adapter plate with 6 simplex SC/APC adapters

Included hardware
(1) ½ Velcro strip
(4) 4-inch zip ties
(2) 6-inch zip ties
(4) M4 x 50mm screws and anchors
(1) electrical ground contact
(6) simplex SC adapters
Available preloaded with corresponding pigtails

TheNID – Hardened
Datasheet
Technical Drawing

Holds 1 hardened connector (included)

Included hardware
(1) ½ Velcro strip
(4) 4-inch zip ties
(2) 6-inch zip ties
(4) M4 x 50mm screws and anchors
(1) electrical ground contact
(1) hardened connector
Available preloaded with pigtail

Industry Standards
Designed to GR-771