Rack Mounting Solutions
Showing 457–480 of 1884 results
-
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Cabinets, Hammond
Swing-Out Wall Mount and Floor Rack Cabinet HWF Series – (HWFVD3036UBK)
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Cabinets, HammondSwing-Out Wall Mount and Floor Rack Cabinet HWF Series – (HWFVD3036UBK)
Features
- Available in three (3) heights
- HWF mounts to the wall and sits on the floor supported by levelling feet. The swing-out section is supported by casters.
- Optional doors install in minutes and are available in a vented, tinted window and solid. Order part RHHK1 for right-hand hinge kit.
- The top of the rear section includes a “Bonus” 3U space for optional rack mount fans or accessory mounting.
- The main body can be installed to swing from left-to-right or right-to-left. Includes locking twist-latches.
- Includes one (1) pair of adjustable depth threaded 10-32 EIA compliant mounting rack rails.
- Thirty (30) inch wide mounting rails include “Bonus” 1U space for optional rack accessories, such as cable management or power bars.
- 10-32 tapped rails are easy to remove on-site and replace with square hole rails (sold separately) if needed.
- Includes starter pack of SCREW1032-50 screws and CLPKIT1032-25 clip nuts and screws.
Specifications
- Heavy-duty rear and base are constructed in 14-gauge welded steel.
- Optional locking doors are constructed in 16-gauge steel.
- Swing-out cabinet constructed in 16-gauge welded steel and features a spring-hinge pin for easy installation and removal.
- 2.50” and 2.00” conduit knockouts are located on the side.
- 4.00″, 2.00” conduit knockouts and BNC 0.625” knockouts are located on the top.
- Numerous cable management mounting points are included.
- Heavy-duty keyhole for wall mounting and levelling feet.
- Large openings in the rear for cable access designed for mounting over electrical receptacles.
- Dedicated bonding and grounding points that also provide drill-less mounting of electrical utility boxes. Ground Cable Kit sold separately.
- UL Listed 2416 load rated for up to 700 lbs (317 kg). Static Load tested to 2,800 lbs (1,270 kg).
- Finished in textured RAL9005 black or RAL9003 white powder paint.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements, when the door is installed.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: HWFVD3036UBK -
Rack Mounting Solutions, Rack Accessories, Equipment Cooling, Hammond
Rack Mount Intake Blowers HB Series – (HB2160A)
Rack Mounting Solutions, Rack Accessories, Equipment Cooling, HammondRack Mount Intake Blowers HB Series – (HB2160A)
Features
- Standard 19″ rack mount
- Air delivery from more than 50% of their 17″ width
- Internal neoprene isolation mounts reduce transmission of vibration to the rack
- Air intake only, to pressurize the rack with filtered air
- Heavy steel construction
- Attractive 19″ stainless steel grille included
- 115 VAC, 50/60 Hz. motor is UL recognized, CSA certified, ball bearing type, cooled by incoming air
- Includes permanent filter (replacement filters available below)
- Comes with a 6ft STJ 3- wire cord
- Optional replacement filters come in a pack of five (5).
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Gallery
Accessories
- Filter Coat
- Mounting Hardware
SKU: HB2160A -
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Racks, Hammond
Slim Wall and Floor Rack Cabinet SDC Series – (SDC246U36BK)
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Racks, HammondSlim Wall and Floor Rack Cabinet SDC Series – (SDC246U36BK)
The SDC Series is a multi-use rack providing numerous options for equipment rack mounting. It is ideal for securing rack-mount equipment in spaces where room for a traditional rack or cabinet is limited or not available. The modular design includes a body with numerous accessory options to suit your unique application.
Features
- Available in 3U, 6U and 9U mounting heights.
- Available in 17.5″, 24.5″, 31.5″ and 36″ overall depths.
- 19″ Mounting rail slots allow for adjustable depth rails and/or optional fan installation.
- Mounting rails are easily removed for non-rack mounting equipment.
- Starter pack of CAGKIT1032-10 screws and cage nuts included with 3U units or CAGKIT1032-50 screws and cage nuts included with 6U & 9U units.
- Removable cover panel for ease of equipment installation.
- Includes four (4) cutouts perfect for mounting over an electrical receptacle and/or for cable entry.
- Interior cable management lances.
- Removable plastic handles for side mounting storage.
- Optional surface mounted doors with quarter-turn lock and end cap available.
Specifications
- Cabinet frame, removable cover and doors constructed in 16-gauge steel.
- Square hole 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are finished in smooth black powder paint.
- Suggest Load Ratings
- Wall Mount (Rack Mounted) up to 150 lbs (68 kg).
- Wall Mount (Rails removed) up to 50 lbs (22 kg).
- Ceiling/ Under Desk Mount up to 150 lbs (68 kg).
- Freestanding (with or without casters) up to 800 lbs (362 kg).
- Grounding studs are provided on the frame as well as side panels and doors.
- Finished in sand textured RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Optional Accessory Features
- Locking Vented Door includes a quarter turn-key lock. The 63% perforation provides airflow for either the front and/or rear of the frame.
- Locking Solid Door includes a quarter turn-key lock.
- Locking Cable/Fan Door includes two openings for rear cable entry that maintain security while allowing cables to enter the cabinet. The door also includes laser knockouts for optional fan kits.
- Conduit/Fan Panel mounts directly to either end of the cabinet providing secure mounting of 2.5”, 2.0”, 13/18”, 13/4”, 11/8” and/or 7/8” conduit knockouts. Also includes laser knockouts for optional fan kits
Accessories
SKU: SDC246U36BK -
Rack Mounting Solutions, Rack Accessories, Mounting Rails, Hammond
Mounting Rack Rails H1R Series – (H1TRR42U30BK)
Rack Mounting Solutions, Rack Accessories, Mounting Rails, HammondMounting Rack Rails H1R Series – (H1TRR42U30BK)
Features
- Sold in pairs
- Rails come numbered in 1U (1.75″) increments.
- Installs vertically in the cabinet.
- Use with H1, RCK, HWF Cabinet series.
- Includes strut mounting hardware (for both rails).
- Rails are compatible for 19″ rack mounting.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
10-32 Threaded Rail Features
- Constructed in 12-gauge steel.
- EIA compliant threaded 10-32 holes.
Square Hole Punched Rail Features
- Constructed in 12-gauge steel.
- EIA compliant square hole punched.
SKU: H1TRR42U30BK -
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Racks, Hammond
Adjustable Depth Center Swing Wall Rack HWMR Series – (HWMR1924UBK)
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Racks, HammondAdjustable Depth Center Swing Wall Rack HWMR Series – (HWMR1924UBK)
The Hammond Wall Mount Rack (HWMR) series was designed to easily mount network equipment in IT environments with limited floor space. Unlike similar racks, Hammond has integrated both depth adjustment and center swing capabilities in one rugged open rack system. Available in 12U, 20U, 24U and 32U rack unit options the HWMR can easily adjust in depth from eighteen to twenty-four inches to accommodate a wide range of equipment sizes.
Features
- Braces and rack rails are constructed of 12-gauge steel, while the other body components are constructed of 16-gauge steel.
- EIA compliant 10-32 tapped rails with 19” mounting and rack unit indicators.
- Rack frame swings (in both directions) at the center providing convenient equipment access without exceeding the rack footprint.
- Adjustable total variable depth from 18” to 24” using slots for easy set-up and adjusting.
- Variable usable depth from 15.1″ to 21.1″
- Top and Bottom rack units have a usable depth from 12.4″ to 18.4″.
- Three (3) spring pin positions allow for simplified equipment maintenance.
- Side and rear cable access with multiple tie points for cable management.
- Finished in RAL9005 black powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- Tested to nearly double the suggested load rating of 220 lbs (100 kg).
- TAA Compliant.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Included in the Box
- HWMR components and assembly hardware.
- Assembly bulletin.
- Wall mounting template for easy 16-inch center installation. (Wall mounting hardware not included)
- Starter pack of SCREW1032-50 screws.
You might also like our RB-2PW Fixed Wall Rack.
Gallery
Accessories
- Cable Managers
- Vertical Cable Tie Down Bracket
- Rack Panels
- Rail Mounting Cable Ring
- Universal Rack Shelf
- Two Post Mounting Clamping Shelf
- Two Post Mounting Adjustable Shelf
- Two Post Mounting Keyboard & Equipment Shelf
- Adjustable Rack Mount DIN Rail Kit
- Hinged Clear Security Cover
- Rack Unit Label
- Mounting Hardware
- PDUs and Outlet Strips
SKU: HWMR1924UBK -
Rack Mounting Solutions, Rack Accessories, Mounting Rails, Hammond
Mounting Rack Rails H1R Series – (H1SRR42U30BK)
Rack Mounting Solutions, Rack Accessories, Mounting Rails, HammondMounting Rack Rails H1R Series – (H1SRR42U30BK)
Features
- Sold in pairs
- Rails come numbered in 1U (1.75″) increments.
- Installs vertically in the cabinet.
- Use with H1, RCK, HWF Cabinet series.
- Includes strut mounting hardware (for both rails).
- Rails are compatible for 19″ rack mounting.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
10-32 Threaded Rail Features
- Constructed in 12-gauge steel.
- EIA compliant threaded 10-32 holes.
Square Hole Punched Rail Features
- Constructed in 12-gauge steel.
- EIA compliant square hole punched.
SKU: H1SRR42U30BK -
Unassembled, Rack Mounting Solutions, Server Racks and Cabinets, Hammond
Test & Measurement Rack Cabinet RCH Series – (RCHV1901024LG1)
Unassembled, Rack Mounting Solutions, Server Racks and Cabinets, HammondTest & Measurement Rack Cabinet RCH Series – (RCHV1901024LG1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: RCHV1901024LG1 -
Unassembled, Rack Mounting Solutions, Server Racks and Cabinets, Hammond
Test & Measurement Rack Cabinet RCH Series – (RCHS1901424LG1)
Unassembled, Rack Mounting Solutions, Server Racks and Cabinets, HammondTest & Measurement Rack Cabinet RCH Series – (RCHS1901424LG1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: RCHS1901424LG1 -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
Test & Measurement Rack Cabinet RCH Series – (RCHS1901024LG1)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondTest & Measurement Rack Cabinet RCH Series – (RCHS1901024LG1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: RCHS1901024LG1 -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
Test & Measurement Rack Cabinet RCH Series – (RCHV1901024BK1)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondTest & Measurement Rack Cabinet RCH Series – (RCHV1901024BK1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: RCHV1901024BK1 -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
Test & Measurement Rack Cabinet RCH Series – (RCHS1901024BK1)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondTest & Measurement Rack Cabinet RCH Series – (RCHS1901024BK1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: RCHS1901024BK1 -
Rack Mounting Solutions, Server Racks and Cabinets, Hammond
Instrument Rack Cabinet RCBS Series – (RCHS1901424BK1)
Rack Mounting Solutions, Server Racks and Cabinets, HammondInstrument Rack Cabinet RCBS Series – (RCHS1901424BK1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of fixed 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack CLPKIT1032-10 clip nuts and rack screws.
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Tested to nearly double the suggested load rating of 600 lbs (272 kg).
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: RCHS1901424BK1 -
Rack Mounting Solutions, Open Frame Racks, Knockdown Open Frame Racks, Hammond
2-Post Open Frame Rack DNRRHDKB Series – (DNRR63HDKB)
Rack Mounting Solutions, Open Frame Racks, Knockdown Open Frame Racks, Hammond2-Post Open Frame Rack DNRRHDKB Series – (DNRR63HDKB)
When strength and reliability is the highest priority, be sure to choose the Data/Networking Robust Rack (DNRR) from Hammond Manufacturing. Designed to support your rack mount infrastructure, regardless of the application, the DNRR includes premium features not found on most other racks.
Features:
- Weighing in at just over 75 lbs., the DNRR Heavy Duty Knockdown Series boasts a 10-gauge steel frame which is the thickest steel rack on the market.
- The knockdown self-squaring design takes just minutes to assemble.
- Our automated tapping process provides EIA compliant tapped rails on both the front and back to ensure flexibility when mounting equipment.
- Includes marked rack unit dividers to aid in equipment mounting.
- When connecting multiple racks together, Hammond provided a 1.25” cable pass-thru. In addition we added numerous tapped and non-tapped holes for mounting power distribution, cable management and other accessories.
- Includes two (2) pairs of integrated 10-32 ground studs, spaced 5/8” apart. Stud pairs are conveniently located across from each other inside the rail channel. For added convenience, a pair is located near the top of the rack, while the other pair is located at the lower side.
- To keep it looking great, the DNRR undergoes a three-stage paint process which includes a coat of premium smooth black powder paint.
- In order to prevent any damage that may occur during transportation, we cover the rails and base of the DNRR with a thick layer of cardboard.
- Tested to nearly double the suggested static load rating of 1,200 lbs (544 kg).
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Gallery
Accessories
- Cable Managers
- Rack Panels
- Hinged Clear Security Cover
- Universal Rack Shelf
- Two Post Mounting Adjustable Shelf
- Two Post Centered Shelf
- Two Post Mounting Keyboard & Equipment Shelf
- Two Post Mounting Clamping Shelf
- Adjustable Rack Mount DIN Rail Kit
- Rack Unit Label
- Open Frame Rack and Rack Cabinet Joining Kit
- Grounding & Bonding
- 10-32 Mounting Hardware
- PDUs and Outlet Strips
SKU: DNRR63HDKB -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
IT, Security and A/V Rack Cabinet RCK Series – (RCKVD36UBK1)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondIT, Security and A/V Rack Cabinet RCK Series – (RCKVD36UBK1)
We designed our new RCK Cabinet series for your Homelab and Pro-AV applications. We’ve included loads of unique features such as bonus rack units, compatibility for standard hardware components, and more. Every RCK is self-squaring and takes just minutes to assemble. In addition, each cabinet has mounting points for our easy four-screw field-installable doors.
Features
- Available in six (6) heights and two (2) depths.
- Optional locking doors are constructed in 16-gauge steel. The door(s) install in minutes and are available in solid, vented, and tinted window.
- Doors include a locking swing handle compatible with electronic locking handles.
- The ready-to-assemble self-squaring cabinet body is constructed in 16-gauge steel and includes vents for optional fans on the cabinet sides.
- Includes two (2) pairs of adjustable depth 10-32 threaded EIA compliant rack rails.
- Both the top and bottom-rear of the cabinet feature a removable conduit knockout 1U panel. The top-rear can be used as a bonus 1U rack mounting point for equipment or rack accessories.
- The front of the cabinet includes at both top and bottom a steel plate. When removed reveals a Decora® compatible mounting point.
- Numerous cable tie-off points are included for front-to-rear cable management.
- Cabinet top includes solid top panel and conduit knockouts for additional cable entry.
- Cabinet base also includes mounting holes for optional casters or levelling feet.
- Both top and cabinet bottom includes an opening compatible with interchangeable “1923” sized top panels.
- Cabinet ganging kit included.
- Includes 50-pack of SCREW1032-50 screws.
Specifications
- Cabinet frame constructed in 16-gauge steel.
- Mounting rails constructed in 12-gauge steel.
- Top-Rear of cabinet included 3.00″, 2.50” and 2.0” knockouts for the conduit.
- Rear 1U panels include 1.375″, 1.125″ and 0.675″ knockouts.
- Include multiple bonding and grounding points.
- Load rated for up to 1,050 lbs (476 kg). Rolling caster load rated for up to 600 lbs (272 kg)
- Finished in textured RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Gallery
Accessories
SKU: RCKVD36UBK1 -
Rack Mounting Solutions, Server Racks and Cabinets, Hammond
Modular Test & Measurement Rack Cabinet C2 Series – (CSP5636LG1)
Rack Mounting Solutions, Server Racks and Cabinets, HammondModular Test & Measurement Rack Cabinet C2 Series – (CSP5636LG1)
When you prefer complete flexibility, our modular C2 series allows you to select every feature. We can ship the components to you for assembly*, we can assemble the cabinet for you or you can choose from some of our popular pre-assembled cabinets, here.
Available Options Include
- 20U, 24U, 28U, 32U, 36U, 40U, 45U, and 49U mounting heights.
- 23″ overall frame widths.
- 23.62″, 31.5″ and 36″ overall frame depths.
- All frames include four (4) levelling feet and support optional casters.
- Mounting rails are sold separately and are available with square-hole punched or drilled and tapped 10-32.
- Flush-mounted doors with quarter-turn lock available in solid, louvre vented, vented, window, and vented window.
- Side panels are available in both solid and vented for thermal induction.
- One (1) interchangeable top panel opening, available in solid, vented, fan tops with or without fans installed.
- One (1) interchangeable bottom panel opening, available in solid or gland membrane.
- Vertical cable managers are available in-tray, enclosed metal or fingers versions.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- 19″ mounting rails are constructed in 12-gauge steel (square hole punched) or 10-gauge steel (drilled and tapped 10-32).
- Rails include rack unit indicators and are Zinc-plated to provide superior surface areas for equipment grounding.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Load rated for up to 1,500 lbs (680 kg).
- Grounding studs are provided on the frame as well as side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Click here to see our Pre-Assembled C2RR Cabinet Series
Are you looking for the CAK for wider legacy C2 cabinets? Click here.
Accessories
- Cabinet Baying/Ganging/Joining Kit
- Cabinet Top Panels
- Door Adapter Kit
- Side Panel Locking Kit
- Partial Height Door Support
- Cabinet Door Replacement Lock
- Vertical Cable Manager with Door
- Vertical Cable Tray
- Rack Shelves
- Rack Mount Locking Storage Drawer
- Horizontal Ring Cable Manager
- Horizontal Hinged Cable Manager
- Rack Panels
- Cable Lacing Bar
- Horizontal Lacing Strip
- Grounding & Bonding
- Power Distribution Units (PDUs)
- Mounting Hardware
- Cabinet Caster Set
- C2 Low-Profile Cabinet Caster Set
- Chassis Handles
- Cable Management Arm
- Bolt Down Kit
SKU: CSP5636LG1 -
Rack Mounting Solutions, Server Racks and Cabinets, Hammond
Modular Test & Measurement Rack Cabinet C2 Series – (CSP5636BK1)
Rack Mounting Solutions, Server Racks and Cabinets, HammondModular Test & Measurement Rack Cabinet C2 Series – (CSP5636BK1)
When you prefer complete flexibility, our modular C2 series allows you to select every feature. We can ship the components to you for assembly*, we can assemble the cabinet for you or you can choose from some of our popular pre-assembled cabinets, here.
Available Options Include
- 20U, 24U, 28U, 32U, 36U, 40U, 45U, and 49U mounting heights.
- 23″ overall frame widths.
- 23.62″, 31.5″ and 36″ overall frame depths.
- All frames include four (4) levelling feet and support optional casters.
- Mounting rails are sold separately and are available with square-hole punched or drilled and tapped 10-32.
- Flush-mounted doors with quarter-turn lock available in solid, louvre vented, vented, window, and vented window.
- Side panels are available in both solid and vented for thermal induction.
- One (1) interchangeable top panel opening, available in solid, vented, fan tops with or without fans installed.
- One (1) interchangeable bottom panel opening, available in solid or gland membrane.
- Vertical cable managers are available in-tray, enclosed metal or fingers versions.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- 19″ mounting rails are constructed in 12-gauge steel (square hole punched) or 10-gauge steel (drilled and tapped 10-32).
- Rails include rack unit indicators and are Zinc-plated to provide superior surface areas for equipment grounding.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Load rated for up to 1,500 lbs (680 kg).
- Grounding studs are provided on the frame as well as side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Click here to see our Pre-Assembled C2RR Cabinet Series
Are you looking for the CAK for wider legacy C2 cabinets? Click here.
Accessories
- Cabinet Baying/Ganging/Joining Kit
- Cabinet Top Panels
- Door Adapter Kit
- Side Panel Locking Kit
- Partial Height Door Support
- Cabinet Door Replacement Lock
- Vertical Cable Manager with Door
- Vertical Cable Tray
- Rack Shelves
- Rack Mount Locking Storage Drawer
- Horizontal Ring Cable Manager
- Horizontal Hinged Cable Manager
- Rack Panels
- Cable Lacing Bar
- Horizontal Lacing Strip
- Grounding & Bonding
- Power Distribution Units (PDUs)
- Mounting Hardware
- Cabinet Caster Set
- C2 Low-Profile Cabinet Caster Set
- Chassis Handles
- Cable Management Arm
- Bolt Down Kit
SKU: CSP5636BK1 -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
Test & Measurement Rack Cabinet RCH Series – (RCHV1901717LG1)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondTest & Measurement Rack Cabinet RCH Series – (RCHV1901717LG1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: RCHV1901717LG1 -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
Test & Measurement Rack Cabinet RCH Series – (RCHV1901717BK1)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondTest & Measurement Rack Cabinet RCH Series – (RCHV1901717BK1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: RCHV1901717BK1 -
Server Racks and Cabinets, Rack Mounting Solutions, Hammond
Modular Test & Measurement Rack Cabinet C2 Series – (CSP7023LG1)
Server Racks and Cabinets, Rack Mounting Solutions, HammondModular Test & Measurement Rack Cabinet C2 Series – (CSP7023LG1)
When you prefer complete flexibility, our modular C2 series allows you to select every feature. We can ship the components to you for assembly*, we can assemble the cabinet for you or you can choose from some of our popular pre-assembled cabinets, here.
Available Options Include
- 20U, 24U, 28U, 32U, 36U, 40U, 45U, and 49U mounting heights.
- 23″ overall frame widths.
- 23.62″, 31.5″ and 36″ overall frame depths.
- All frames include four (4) levelling feet and support optional casters.
- Mounting rails are sold separately and are available with square-hole punched or drilled and tapped 10-32.
- Flush-mounted doors with quarter-turn lock available in solid, louvre vented, vented, window, and vented window.
- Side panels are available in both solid and vented for thermal induction.
- One (1) interchangeable top panel opening, available in solid, vented, fan tops with or without fans installed.
- One (1) interchangeable bottom panel opening, available in solid or gland membrane.
- Vertical cable managers are available in-tray, enclosed metal or fingers versions.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- 19″ mounting rails are constructed in 12-gauge steel (square hole punched) or 10-gauge steel (drilled and tapped 10-32).
- Rails include rack unit indicators and are Zinc-plated to provide superior surface areas for equipment grounding.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Load rated for up to 1,500 lbs (680 kg).
- Grounding studs are provided on the frame as well as side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Click here to see our Pre-Assembled C2RR Cabinet Series
Are you looking for the CAK for wider legacy C2 cabinets? Click here.
Accessories
- Cabinet Baying/Ganging/Joining Kit
- Cabinet Top Panels
- Door Adapter Kit
- Side Panel Locking Kit
- Partial Height Door Support
- Cabinet Door Replacement Lock
- Vertical Cable Manager with Door
- Vertical Cable Tray
- Rack Shelves
- Rack Mount Locking Storage Drawer
- Horizontal Ring Cable Manager
- Horizontal Hinged Cable Manager
- Rack Panels
- Cable Lacing Bar
- Horizontal Lacing Strip
- Grounding & Bonding
- Power Distribution Units (PDUs)
- Mounting Hardware
- Cabinet Caster Set
- C2 Low-Profile Cabinet Caster Set
- Chassis Handles
- Cable Management Arm
- Bolt Down Kit
SKU: CSP7023LG1 -
Rack Mounting Solutions, Server Racks and Cabinets, Hammond
Modular Test & Measurement Rack Cabinet C2 Series – (CSP7023BK1)
Rack Mounting Solutions, Server Racks and Cabinets, HammondModular Test & Measurement Rack Cabinet C2 Series – (CSP7023BK1)
When you prefer complete flexibility, our modular C2 series allows you to select every feature. We can ship the components to you for assembly*, we can assemble the cabinet for you or you can choose from some of our popular pre-assembled cabinets, here.
Available Options Include
- 20U, 24U, 28U, 32U, 36U, 40U, 45U, and 49U mounting heights.
- 23″ overall frame widths.
- 23.62″, 31.5″ and 36″ overall frame depths.
- All frames include four (4) levelling feet and support optional casters.
- Mounting rails are sold separately and are available with square-hole punched or drilled and tapped 10-32.
- Flush-mounted doors with quarter-turn lock available in solid, louvre vented, vented, window, and vented window.
- Side panels are available in both solid and vented for thermal induction.
- One (1) interchangeable top panel opening, available in solid, vented, fan tops with or without fans installed.
- One (1) interchangeable bottom panel opening, available in solid or gland membrane.
- Vertical cable managers are available in-tray, enclosed metal or fingers versions.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- 19″ mounting rails are constructed in 12-gauge steel (square hole punched) or 10-gauge steel (drilled and tapped 10-32).
- Rails include rack unit indicators and are Zinc-plated to provide superior surface areas for equipment grounding.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Load rated for up to 1,500 lbs (680 kg).
- Grounding studs are provided on the frame as well as side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Click here to see our Pre-Assembled C2RR Cabinet Series
Are you looking for the CAK for wider legacy C2 cabinets? Click here.
Accessories
- Cabinet Baying/Ganging/Joining Kit
- Cabinet Top Panels
- Door Adapter Kit
- Side Panel Locking Kit
- Partial Height Door Support
- Cabinet Door Replacement Lock
- Vertical Cable Manager with Door
- Vertical Cable Tray
- Rack Shelves
- Rack Mount Locking Storage Drawer
- Horizontal Ring Cable Manager
- Horizontal Hinged Cable Manager
- Rack Panels
- Cable Lacing Bar
- Horizontal Lacing Strip
- Grounding & Bonding
- Power Distribution Units (PDUs)
- Mounting Hardware
- Cabinet Caster Set
- C2 Low-Profile Cabinet Caster Set
- Chassis Handles
- Cable Management Arm
- Bolt Down Kit
SKU: CSP7023BK1 -
Rack Mounting Solutions, Rack Accessories, Mounting Rails, Hammond
Mounting Rack Rails H1R Series – (H1TRR42U24BK)
Rack Mounting Solutions, Rack Accessories, Mounting Rails, HammondMounting Rack Rails H1R Series – (H1TRR42U24BK)
Features
- Sold in pairs
- Rails come numbered in 1U (1.75″) increments.
- Installs vertically in the cabinet.
- Use with H1, RCK, HWF Cabinet series.
- Includes strut mounting hardware (for both rails).
- Rails are compatible for 19″ rack mounting.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
10-32 Threaded Rail Features
- Constructed in 12-gauge steel.
- EIA compliant threaded 10-32 holes.
Square Hole Punched Rail Features
- Constructed in 12-gauge steel.
- EIA compliant square hole punched.
SKU: H1TRR42U24BK -
Doors, Rack Mounting Solutions, Rack Accessories, Hammond
C4 Doors C4DF Series – (C4DF2473VBK1)
Features
- Constructed in 16-gauge steel.
- Easily installs into C4 Series cabinets using integrated spring pin at top and bottom of the door.
- Hinged on left, swings from right to left.
- Need hinging on right? Order the C4RHINGE.
- Includes formed plastic handle, quarter-turn lock and hinges to mount on the cabinet.
- Available in Solid, Louvered, Perforated, Window and Vented Window options.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Accessories
- Cabinet Door Replacement Lock
- Split Door Retrofit Kit
SKU: C4DF2473VBK1 -
Server Racks and Cabinets, Unassembled, Rack Mounting Solutions, Hammond
Test & Measurement Rack Cabinet RCH Series – (RCHS1902217LG1)
Server Racks and Cabinets, Unassembled, Rack Mounting Solutions, HammondTest & Measurement Rack Cabinet RCH Series – (RCHS1902217LG1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: RCHS1902217LG1 -
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, Hammond
Test & Measurement Rack Cabinet RCH Series – (RCHS1902217BK1)
Rack Mounting Solutions, Server Racks and Cabinets, Unassembled, HammondTest & Measurement Rack Cabinet RCH Series – (RCHS1902217BK1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: RCHS1902217BK1