Type 4, 4X Polyester Pushbutton Enclosure PJPBLC Series – (PJ864HP6) (DISCONTINUED)

Application

• Designed for use as pushbutton enclosures for 30.5mm devices.
• Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
• Ideal in applications with high temperatures or highly corrosive environments.

Standards

• UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
• CSA Type 1, 2, 3, 4, 4X, 12 and 13
• Complies with
  • NEMA Type 1, 2, 3, 4, 4X, 12 and 13
  • IEC 60529, IP66

Construction

• Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
• Standard JIC sizes under 18″ x 16″.
• Threaded brass inserts are provided for optional inner panel or terminal kit mounting.
• Cover is fastened with captive stainless steel screws in threaded brass inserts.
• Captive oil resistant gasket provides a positive seal.
• Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
• Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
• Enhanced UV inhibitors protect against outdoor weathering.
• Operating temperatures between 130°C and -40°C (266°F to -40°F).
• Impact index of 6.78J (5 ft/lb).
• For corrosion resistance information, please refer to table in Technical Information.

Finish

• Fiberglass polyester material has a gray finish.
• Optional inner panels are available in white powder coated finished steel or unfinished aluminum.

Accessories

• Additional Inner Panels
• Terminal Kit Assemblies
• PJ Stainless Replacement Mounting Feet
• Hole Plugs