American Tech Supply Full Catalog
Showing 71377–71400 of 73131 results
-
Discontinued Products
Painted Die-Cast “Stomp Box” Enclosures 1590-STOMP Series – (1590TRPCGR) (DISCONTINUED)
Discontinued ProductsPainted Die-Cast “Stomp Box” Enclosures 1590-STOMP Series – (1590TRPCGR) (DISCONTINUED)
Key Features:
- Rugged, diecast aluminum alloy (tough – yet easy to machine), electronic instrument enclosure.
- Factory powder coated to save stomp box manufacturers and experimenters time & money.
- Coated with a smooth gloss polyester powder coat for a lasting finish, even after machining.
- Smooth finish allows for easy adhesion of labels and/or silk screens.
- Colors are matched to standard RAL colors (see table below).
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unfinished & textured black version is also available & in many other sizes and styles – See “Die-Cast Aluminum” and “Trapezoid & Octagon Die-Cast”
- Designed to meet IP54. See gasket kit accessory below to meet IP65. IP65 rating also requires water-tight screws.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Replacement Hardware
- Replacement screws – nickel plated, 6-32 x 1/2” – 1590MS100 – Package of 100.
- For an even funkier look – order our black replacement screws, 6-32 x 1/2” – 1590MS50BK – Package of 50
Tamper-Resistant Hardware (Upgrade!)
- Tamper-resistant screws – nickel plated, 6-32 x 1/2” – 1590MS50T – Package of 50.
- For an even funkier look – order our black replacement screws, 6-32 x 1/2” – 1590MS50TBK – Package of 50
Photo Features:
Hammond stomp box enclosures come in traditional sizes and shapes and well as unique trapezoid and octagon models.SKU: 1590TRPCGR -
Discontinued Products
Painted Die-Cast “Stomp Box” Enclosures 1590-STOMP Series – (1590TRPCCB) (DISCONTINUED)
Discontinued ProductsPainted Die-Cast “Stomp Box” Enclosures 1590-STOMP Series – (1590TRPCCB) (DISCONTINUED)
Key Features:
- Rugged, diecast aluminum alloy (tough – yet easy to machine), electronic instrument enclosure.
- Factory powder coated to save stomp box manufacturers and experimenters time & money.
- Coated with a smooth gloss polyester powder coat for a lasting finish, even after machining.
- Smooth finish allows for easy adhesion of labels and/or silk screens.
- Colors are matched to standard RAL colors (see table below).
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unfinished & textured black version is also available & in many other sizes and styles – See “Die-Cast Aluminum” and “Trapezoid & Octagon Die-Cast”
- Designed to meet IP54. See gasket kit accessory below to meet IP65. IP65 rating also requires water-tight screws.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Replacement Hardware
- Replacement screws – nickel plated, 6-32 x 1/2” – 1590MS100 – Package of 100.
- For an even funkier look – order our black replacement screws, 6-32 x 1/2” – 1590MS50BK – Package of 50
Tamper-Resistant Hardware (Upgrade!)
- Tamper-resistant screws – nickel plated, 6-32 x 1/2” – 1590MS50T – Package of 50.
- For an even funkier look – order our black replacement screws, 6-32 x 1/2” – 1590MS50TBK – Package of 50
Photo Features:
Hammond stomp box enclosures come in traditional sizes and shapes and well as unique trapezoid and octagon models.SKU: 1590TRPCCB -
Discontinued Products
Painted Die-Cast “Stomp Box” Enclosures 1590-STOMP Series – (1590TRPBYL) (DISCONTINUED)
Discontinued ProductsPainted Die-Cast “Stomp Box” Enclosures 1590-STOMP Series – (1590TRPBYL) (DISCONTINUED)
Key Features:
- Rugged, diecast aluminum alloy (tough – yet easy to machine), electronic instrument enclosure.
- Factory powder coated to save stomp box manufacturers and experimenters time & money.
- Coated with a smooth gloss polyester powder coat for a lasting finish, even after machining.
- Smooth finish allows for easy adhesion of labels and/or silk screens.
- Colors are matched to standard RAL colors (see table below).
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unfinished & textured black version is also available & in many other sizes and styles – See “Die-Cast Aluminum” and “Trapezoid & Octagon Die-Cast”
- Designed to meet IP54. See gasket kit accessory below to meet IP65. IP65 rating also requires water-tight screws.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Replacement Hardware
- Replacement screws – nickel plated, 6-32 x 1/2” – 1590MS100 – Package of 100.
- For an even funkier look – order our black replacement screws, 6-32 x 1/2” – 1590MS50BK – Package of 50
Tamper-Resistant Hardware (Upgrade!)
- Tamper-resistant screws – nickel plated, 6-32 x 1/2” – 1590MS50T – Package of 50.
- For an even funkier look – order our black replacement screws, 6-32 x 1/2” – 1590MS50TBK – Package of 50
Photo Features:
Hammond stomp box enclosures come in traditional sizes and shapes and well as unique trapezoid and octagon models.SKU: 1590TRPBYL -
Discontinued Products
Painted Die-Cast “Stomp Box” Enclosures 1590-STOMP Series – (1590TRPBRD) (DISCONTINUED)
Discontinued ProductsPainted Die-Cast “Stomp Box” Enclosures 1590-STOMP Series – (1590TRPBRD) (DISCONTINUED)
Key Features:
- Rugged, diecast aluminum alloy (tough – yet easy to machine), electronic instrument enclosure.
- Factory powder coated to save stomp box manufacturers and experimenters time & money.
- Coated with a smooth gloss polyester powder coat for a lasting finish, even after machining.
- Smooth finish allows for easy adhesion of labels and/or silk screens.
- Colors are matched to standard RAL colors (see table below).
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unfinished & textured black version is also available & in many other sizes and styles – See “Die-Cast Aluminum” and “Trapezoid & Octagon Die-Cast”
- Designed to meet IP54. See gasket kit accessory below to meet IP65. IP65 rating also requires water-tight screws.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Replacement Hardware
- Replacement screws – nickel plated, 6-32 x 1/2” – 1590MS100 – Package of 100.
- For an even funkier look – order our black replacement screws, 6-32 x 1/2” – 1590MS50BK – Package of 50
Tamper-Resistant Hardware (Upgrade!)
- Tamper-resistant screws – nickel plated, 6-32 x 1/2” – 1590MS50T – Package of 50.
- For an even funkier look – order our black replacement screws, 6-32 x 1/2” – 1590MS50TBK – Package of 50
Photo Features:
Hammond stomp box enclosures come in traditional sizes and shapes and well as unique trapezoid and octagon models.SKU: 1590TRPBRD -
Discontinued Products
Painted Die-Cast “Stomp Box” Enclosures 1590-STOMP Series – (1590TRPBPR) (DISCONTINUED)
Discontinued ProductsPainted Die-Cast “Stomp Box” Enclosures 1590-STOMP Series – (1590TRPBPR) (DISCONTINUED)
Key Features:
- Rugged, diecast aluminum alloy (tough – yet easy to machine), electronic instrument enclosure.
- Factory powder coated to save stomp box manufacturers and experimenters time & money.
- Coated with a smooth gloss polyester powder coat for a lasting finish, even after machining.
- Smooth finish allows for easy adhesion of labels and/or silk screens.
- Colors are matched to standard RAL colors (see table below).
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unfinished & textured black version is also available & in many other sizes and styles – See “Die-Cast Aluminum” and “Trapezoid & Octagon Die-Cast”
- Designed to meet IP54. See gasket kit accessory below to meet IP65. IP65 rating also requires water-tight screws.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Replacement Hardware
- Replacement screws – nickel plated, 6-32 x 1/2” – 1590MS100 – Package of 100.
- For an even funkier look – order our black replacement screws, 6-32 x 1/2” – 1590MS50BK – Package of 50
Tamper-Resistant Hardware (Upgrade!)
- Tamper-resistant screws – nickel plated, 6-32 x 1/2” – 1590MS50T – Package of 50.
- For an even funkier look – order our black replacement screws, 6-32 x 1/2” – 1590MS50TBK – Package of 50
Photo Features:
Hammond stomp box enclosures come in traditional sizes and shapes and well as unique trapezoid and octagon models.SKU: 1590TRPBPR -
Discontinued Products
Painted Die-Cast “Stomp Box” Enclosures 1590-STOMP Series – (1590TRPBOR) (DISCONTINUED)
Discontinued ProductsPainted Die-Cast “Stomp Box” Enclosures 1590-STOMP Series – (1590TRPBOR) (DISCONTINUED)
Key Features:
- Rugged, diecast aluminum alloy (tough – yet easy to machine), electronic instrument enclosure.
- Factory powder coated to save stomp box manufacturers and experimenters time & money.
- Coated with a smooth gloss polyester powder coat for a lasting finish, even after machining.
- Smooth finish allows for easy adhesion of labels and/or silk screens.
- Colors are matched to standard RAL colors (see table below).
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unfinished & textured black version is also available & in many other sizes and styles – See “Die-Cast Aluminum” and “Trapezoid & Octagon Die-Cast”
- Designed to meet IP54. See gasket kit accessory below to meet IP65. IP65 rating also requires water-tight screws.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Replacement Hardware
- Replacement screws – nickel plated, 6-32 x 1/2” – 1590MS100 – Package of 100.
- For an even funkier look – order our black replacement screws, 6-32 x 1/2” – 1590MS50BK – Package of 50
Tamper-Resistant Hardware (Upgrade!)
- Tamper-resistant screws – nickel plated, 6-32 x 1/2” – 1590MS50T – Package of 50.
- For an even funkier look – order our black replacement screws, 6-32 x 1/2” – 1590MS50TBK – Package of 50
Photo Features:
Hammond stomp box enclosures come in traditional sizes and shapes and well as unique trapezoid and octagon models.SKU: 1590TRPBOR -
Discontinued Products
Painted Die-Cast “Stomp Box” Enclosures 1590-STOMP Series – (1590TRPBLG) (DISCONTINUED)
Discontinued ProductsPainted Die-Cast “Stomp Box” Enclosures 1590-STOMP Series – (1590TRPBLG) (DISCONTINUED)
Key Features:
- Rugged, diecast aluminum alloy (tough – yet easy to machine), electronic instrument enclosure.
- Factory powder coated to save stomp box manufacturers and experimenters time & money.
- Coated with a smooth gloss polyester powder coat for a lasting finish, even after machining.
- Smooth finish allows for easy adhesion of labels and/or silk screens.
- Colors are matched to standard RAL colors (see table below).
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unfinished & textured black version is also available & in many other sizes and styles – See “Die-Cast Aluminum” and “Trapezoid & Octagon Die-Cast”
- Designed to meet IP54. See gasket kit accessory below to meet IP65. IP65 rating also requires water-tight screws.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Replacement Hardware
- Replacement screws – nickel plated, 6-32 x 1/2” – 1590MS100 – Package of 100.
- For an even funkier look – order our black replacement screws, 6-32 x 1/2” – 1590MS50BK – Package of 50
Tamper-Resistant Hardware (Upgrade!)
- Tamper-resistant screws – nickel plated, 6-32 x 1/2” – 1590MS50T – Package of 50.
- For an even funkier look – order our black replacement screws, 6-32 x 1/2” – 1590MS50TBK – Package of 50
Photo Features:
Hammond stomp box enclosures come in traditional sizes and shapes and well as unique trapezoid and octagon models.SKU: 1590TRPBLG -
Discontinued Products
Painted Die-Cast “Stomp Box” Enclosures 1590-STOMP Series – (1590TRPBGR) (DISCONTINUED)
Discontinued ProductsPainted Die-Cast “Stomp Box” Enclosures 1590-STOMP Series – (1590TRPBGR) (DISCONTINUED)
Key Features:
- Rugged, diecast aluminum alloy (tough – yet easy to machine), electronic instrument enclosure.
- Factory powder coated to save stomp box manufacturers and experimenters time & money.
- Coated with a smooth gloss polyester powder coat for a lasting finish, even after machining.
- Smooth finish allows for easy adhesion of labels and/or silk screens.
- Colors are matched to standard RAL colors (see table below).
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unfinished & textured black version is also available & in many other sizes and styles – See “Die-Cast Aluminum” and “Trapezoid & Octagon Die-Cast”
- Designed to meet IP54. See gasket kit accessory below to meet IP65. IP65 rating also requires water-tight screws.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Replacement Hardware
- Replacement screws – nickel plated, 6-32 x 1/2” – 1590MS100 – Package of 100.
- For an even funkier look – order our black replacement screws, 6-32 x 1/2” – 1590MS50BK – Package of 50
Tamper-Resistant Hardware (Upgrade!)
- Tamper-resistant screws – nickel plated, 6-32 x 1/2” – 1590MS50T – Package of 50.
- For an even funkier look – order our black replacement screws, 6-32 x 1/2” – 1590MS50TBK – Package of 50
Photo Features:
Hammond stomp box enclosures come in traditional sizes and shapes and well as unique trapezoid and octagon models.SKU: 1590TRPBGR -
Discontinued Products
Painted Die-Cast “Stomp Box” Enclosures 1590-STOMP Series – (1590TRPBCB) (DISCONTINUED)
Discontinued ProductsPainted Die-Cast “Stomp Box” Enclosures 1590-STOMP Series – (1590TRPBCB) (DISCONTINUED)
Key Features:
- Rugged, diecast aluminum alloy (tough – yet easy to machine), electronic instrument enclosure.
- Factory powder coated to save stomp box manufacturers and experimenters time & money.
- Coated with a smooth gloss polyester powder coat for a lasting finish, even after machining.
- Smooth finish allows for easy adhesion of labels and/or silk screens.
- Colors are matched to standard RAL colors (see table below).
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unfinished & textured black version is also available & in many other sizes and styles – See “Die-Cast Aluminum” and “Trapezoid & Octagon Die-Cast”
- Designed to meet IP54. See gasket kit accessory below to meet IP65. IP65 rating also requires water-tight screws.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Replacement Hardware
- Replacement screws – nickel plated, 6-32 x 1/2” – 1590MS100 – Package of 100.
- For an even funkier look – order our black replacement screws, 6-32 x 1/2” – 1590MS50BK – Package of 50
Tamper-Resistant Hardware (Upgrade!)
- Tamper-resistant screws – nickel plated, 6-32 x 1/2” – 1590MS50T – Package of 50.
- For an even funkier look – order our black replacement screws, 6-32 x 1/2” – 1590MS50TBK – Package of 50
Photo Features:
Hammond stomp box enclosures come in traditional sizes and shapes and well as unique trapezoid and octagon models.SKU: 1590TRPBCB -
Discontinued Products
Diecast Aluminum Enclosures 1590-RIBBED Series – (1590RGASKET) (DISCONTINUED)
Features
- Rugged, diecast aluminum alloy (tough – yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
- Includes screws threaded into factory-tapped holes. Screw type and quantity vary. See details below or in drawings.
- Standard versions are designed to meet IP54.
- Water-tight versions are designed to meet IP65 and include a gasket which is supplied loose inside the enclosure (not pre-installed).
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Hardware
NOTE: 1590 series enclosures feature factory-tapped assembly screw holes that accept machine screws, which are included with the enclosures.Replacement Hardware
Tamper-proof Hardware Upgrade (Torx w/ Pin)
See “Hardware” table below for compatibility.
Gaskets
NOTE: Gaskets are included with watertight 1590 enclosures. They can also be purchased as a kit if you’d like to upgrade an IP54 enclosure to IP65. Not available for all sizes.
- Each kit includes two pre-formed silicone gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later.
- Gasket is applied to the lid.
- Designed to meet IP65 with properly installed gasket and lid screws torqued to 25-30 cN.m (36-43 ozf.in).
- Refer to part number table below for correct gasket.
Notes
- Lid height is 0.16″ (4 mm).
SKU: 1590RGASKET -
Discontinued Products
Diecast Aluminum Enclosures 1590-RIBBED Series – (1590RF) (DISCONTINUED)
Features
- Rugged, diecast aluminum alloy (tough – yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
- Includes screws threaded into factory-tapped holes. Screw type and quantity vary. See details below or in drawings.
- Standard versions are designed to meet IP54.
- Water-tight versions are designed to meet IP65 and include a gasket which is supplied loose inside the enclosure (not pre-installed).
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Hardware
NOTE: 1590 series enclosures feature factory-tapped assembly screw holes that accept machine screws, which are included with the enclosures.Replacement Hardware
Tamper-proof Hardware Upgrade (Torx w/ Pin)
See “Hardware” table below for compatibility.
Gaskets
NOTE: Gaskets are included with watertight 1590 enclosures. They can also be purchased as a kit if you’d like to upgrade an IP54 enclosure to IP65. Not available for all sizes.
- Each kit includes two pre-formed silicone gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later.
- Gasket is applied to the lid.
- Designed to meet IP65 with properly installed gasket and lid screws torqued to 25-30 cN.m (36-43 ozf.in).
- Refer to part number table below for correct gasket.
Notes
- Lid height is 0.16″ (4 mm).
SKU: 1590RF -
Discontinued Products
Diecast Aluminum Enclosures 1590-RIBBED Series – (1590WPFBK) (DISCONTINUED)
Features
- Rugged, diecast aluminum alloy (tough – yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
- Includes screws threaded into factory-tapped holes. Screw type and quantity vary. See details below or in drawings.
- Standard versions are designed to meet IP54.
- Water-tight versions are designed to meet IP65 and include a gasket which is supplied loose inside the enclosure (not pre-installed).
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Hardware
NOTE: 1590 series enclosures feature factory-tapped assembly screw holes that accept machine screws, which are included with the enclosures.Replacement Hardware
Tamper-proof Hardware Upgrade (Torx w/ Pin)
See “Hardware” table below for compatibility.
Gaskets
NOTE: Gaskets are included with watertight 1590 enclosures. They can also be purchased as a kit if you’d like to upgrade an IP54 enclosure to IP65. Not available for all sizes.
- Each kit includes two pre-formed silicone gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later.
- Gasket is applied to the lid.
- Designed to meet IP65 with properly installed gasket and lid screws torqued to 25-30 cN.m (36-43 ozf.in).
- Refer to part number table below for correct gasket.
Notes
- Lid height is 0.16″ (4 mm).
SKU: 1590WPFBK -
Discontinued Products
Diecast Aluminum Enclosures 1590-RIBBED Series – (1590WPFLBK) (DISCONTINUED)
Features
- Rugged, diecast aluminum alloy (tough – yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
- Includes screws threaded into factory-tapped holes. Screw type and quantity vary. See details below or in drawings.
- Standard versions are designed to meet IP54.
- Water-tight versions are designed to meet IP65 and include a gasket which is supplied loose inside the enclosure (not pre-installed).
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Hardware
NOTE: 1590 series enclosures feature factory-tapped assembly screw holes that accept machine screws, which are included with the enclosures.Replacement Hardware
Tamper-proof Hardware Upgrade (Torx w/ Pin)
See “Hardware” table below for compatibility.
Gaskets
NOTE: Gaskets are included with watertight 1590 enclosures. They can also be purchased as a kit if you’d like to upgrade an IP54 enclosure to IP65. Not available for all sizes.
- Each kit includes two pre-formed silicone gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later.
- Gasket is applied to the lid.
- Designed to meet IP65 with properly installed gasket and lid screws torqued to 25-30 cN.m (36-43 ozf.in).
- Refer to part number table below for correct gasket.
Notes
- Lid height is 0.16″ (4 mm).
SKU: 1590WPFLBK -
Discontinued Products
Diecast Aluminum Enclosures 1590-RIBBED Series – (1590PFLBK) (DISCONTINUED)
Features
- Rugged, diecast aluminum alloy (tough – yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
- Includes screws threaded into factory-tapped holes. Screw type and quantity vary. See details below or in drawings.
- Standard versions are designed to meet IP54.
- Water-tight versions are designed to meet IP65 and include a gasket which is supplied loose inside the enclosure (not pre-installed).
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Hardware
NOTE: 1590 series enclosures feature factory-tapped assembly screw holes that accept machine screws, which are included with the enclosures.Replacement Hardware
Tamper-proof Hardware Upgrade (Torx w/ Pin)
See “Hardware” table below for compatibility.
Gaskets
NOTE: Gaskets are included with watertight 1590 enclosures. They can also be purchased as a kit if you’d like to upgrade an IP54 enclosure to IP65. Not available for all sizes.
- Each kit includes two pre-formed silicone gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later.
- Gasket is applied to the lid.
- Designed to meet IP65 with properly installed gasket and lid screws torqued to 25-30 cN.m (36-43 ozf.in).
- Refer to part number table below for correct gasket.
Notes
- Lid height is 0.16″ (4 mm).
SKU: 1590PFLBK -
Discontinued Products
Diecast Aluminum Enclosures 1590-RIBBED Series – (1590WPBK) (DISCONTINUED)
Features
- Rugged, diecast aluminum alloy (tough – yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
- Includes screws threaded into factory-tapped holes. Screw type and quantity vary. See details below or in drawings.
- Standard versions are designed to meet IP54.
- Water-tight versions are designed to meet IP65 and include a gasket which is supplied loose inside the enclosure (not pre-installed).
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Hardware
NOTE: 1590 series enclosures feature factory-tapped assembly screw holes that accept machine screws, which are included with the enclosures.Replacement Hardware
Tamper-proof Hardware Upgrade (Torx w/ Pin)
See “Hardware” table below for compatibility.
Gaskets
NOTE: Gaskets are included with watertight 1590 enclosures. They can also be purchased as a kit if you’d like to upgrade an IP54 enclosure to IP65. Not available for all sizes.
- Each kit includes two pre-formed silicone gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later.
- Gasket is applied to the lid.
- Designed to meet IP65 with properly installed gasket and lid screws torqued to 25-30 cN.m (36-43 ozf.in).
- Refer to part number table below for correct gasket.
Notes
- Lid height is 0.16″ (4 mm).
SKU: 1590WPBK -
Discontinued Products
Diecast Aluminum Enclosures 1590-RIBBED Series – (1590PGASKET) (DISCONTINUED)
Features
- Rugged, diecast aluminum alloy (tough – yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
- Includes screws threaded into factory-tapped holes. Screw type and quantity vary. See details below or in drawings.
- Standard versions are designed to meet IP54.
- Water-tight versions are designed to meet IP65 and include a gasket which is supplied loose inside the enclosure (not pre-installed).
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Hardware
NOTE: 1590 series enclosures feature factory-tapped assembly screw holes that accept machine screws, which are included with the enclosures.Replacement Hardware
Tamper-proof Hardware Upgrade (Torx w/ Pin)
See “Hardware” table below for compatibility.
Gaskets
NOTE: Gaskets are included with watertight 1590 enclosures. They can also be purchased as a kit if you’d like to upgrade an IP54 enclosure to IP65. Not available for all sizes.
- Each kit includes two pre-formed silicone gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later.
- Gasket is applied to the lid.
- Designed to meet IP65 with properly installed gasket and lid screws torqued to 25-30 cN.m (36-43 ozf.in).
- Refer to part number table below for correct gasket.
Notes
- Lid height is 0.16″ (4 mm).
SKU: 1590PGASKET -
Discontinued Products
Diecast Aluminum Enclosures 1590-RIBBED Series – (1590WPF) (DISCONTINUED)
Features
- Rugged, diecast aluminum alloy (tough – yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
- Includes screws threaded into factory-tapped holes. Screw type and quantity vary. See details below or in drawings.
- Standard versions are designed to meet IP54.
- Water-tight versions are designed to meet IP65 and include a gasket which is supplied loose inside the enclosure (not pre-installed).
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Hardware
NOTE: 1590 series enclosures feature factory-tapped assembly screw holes that accept machine screws, which are included with the enclosures.Replacement Hardware
Tamper-proof Hardware Upgrade (Torx w/ Pin)
See “Hardware” table below for compatibility.
Gaskets
NOTE: Gaskets are included with watertight 1590 enclosures. They can also be purchased as a kit if you’d like to upgrade an IP54 enclosure to IP65. Not available for all sizes.
- Each kit includes two pre-formed silicone gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later.
- Gasket is applied to the lid.
- Designed to meet IP65 with properly installed gasket and lid screws torqued to 25-30 cN.m (36-43 ozf.in).
- Refer to part number table below for correct gasket.
Notes
- Lid height is 0.16″ (4 mm).
SKU: 1590WPF -
Discontinued Products
Diecast Aluminum Enclosures 1590-RIBBED Series – (1590PF) (DISCONTINUED)
Features
- Rugged, diecast aluminum alloy (tough – yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
- Includes screws threaded into factory-tapped holes. Screw type and quantity vary. See details below or in drawings.
- Standard versions are designed to meet IP54.
- Water-tight versions are designed to meet IP65 and include a gasket which is supplied loose inside the enclosure (not pre-installed).
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Hardware
NOTE: 1590 series enclosures feature factory-tapped assembly screw holes that accept machine screws, which are included with the enclosures.Replacement Hardware
Tamper-proof Hardware Upgrade (Torx w/ Pin)
See “Hardware” table below for compatibility.
Gaskets
NOTE: Gaskets are included with watertight 1590 enclosures. They can also be purchased as a kit if you’d like to upgrade an IP54 enclosure to IP65. Not available for all sizes.
- Each kit includes two pre-formed silicone gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later.
- Gasket is applied to the lid.
- Designed to meet IP65 with properly installed gasket and lid screws torqued to 25-30 cN.m (36-43 ozf.in).
- Refer to part number table below for correct gasket.
Notes
- Lid height is 0.16″ (4 mm).
SKU: 1590PF -
Discontinued Products
Diecast Aluminum Enclosures 1590-RIBBED Series – (1590WPFL) (DISCONTINUED)
Features
- Rugged, diecast aluminum alloy (tough – yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
- Includes screws threaded into factory-tapped holes. Screw type and quantity vary. See details below or in drawings.
- Standard versions are designed to meet IP54.
- Water-tight versions are designed to meet IP65 and include a gasket which is supplied loose inside the enclosure (not pre-installed).
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Hardware
NOTE: 1590 series enclosures feature factory-tapped assembly screw holes that accept machine screws, which are included with the enclosures.Replacement Hardware
Tamper-proof Hardware Upgrade (Torx w/ Pin)
See “Hardware” table below for compatibility.
Gaskets
NOTE: Gaskets are included with watertight 1590 enclosures. They can also be purchased as a kit if you’d like to upgrade an IP54 enclosure to IP65. Not available for all sizes.
- Each kit includes two pre-formed silicone gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later.
- Gasket is applied to the lid.
- Designed to meet IP65 with properly installed gasket and lid screws torqued to 25-30 cN.m (36-43 ozf.in).
- Refer to part number table below for correct gasket.
Notes
- Lid height is 0.16″ (4 mm).
SKU: 1590WPFL -
Discontinued Products
Diecast Aluminum Enclosures 1590-RIBBED Series – (1590PFL) (DISCONTINUED)
Features
- Rugged, diecast aluminum alloy (tough – yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
- Includes screws threaded into factory-tapped holes. Screw type and quantity vary. See details below or in drawings.
- Standard versions are designed to meet IP54.
- Water-tight versions are designed to meet IP65 and include a gasket which is supplied loose inside the enclosure (not pre-installed).
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Hardware
NOTE: 1590 series enclosures feature factory-tapped assembly screw holes that accept machine screws, which are included with the enclosures.Replacement Hardware
Tamper-proof Hardware Upgrade (Torx w/ Pin)
See “Hardware” table below for compatibility.
Gaskets
NOTE: Gaskets are included with watertight 1590 enclosures. They can also be purchased as a kit if you’d like to upgrade an IP54 enclosure to IP65. Not available for all sizes.
- Each kit includes two pre-formed silicone gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later.
- Gasket is applied to the lid.
- Designed to meet IP65 with properly installed gasket and lid screws torqued to 25-30 cN.m (36-43 ozf.in).
- Refer to part number table below for correct gasket.
Notes
- Lid height is 0.16″ (4 mm).
SKU: 1590PFL -
Discontinued Products
Diecast Aluminum Enclosures 1590-RIBBED Series – (1590WP) (DISCONTINUED)
Features
- Rugged, diecast aluminum alloy (tough – yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
- Includes screws threaded into factory-tapped holes. Screw type and quantity vary. See details below or in drawings.
- Standard versions are designed to meet IP54.
- Water-tight versions are designed to meet IP65 and include a gasket which is supplied loose inside the enclosure (not pre-installed).
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Hardware
NOTE: 1590 series enclosures feature factory-tapped assembly screw holes that accept machine screws, which are included with the enclosures.Replacement Hardware
Tamper-proof Hardware Upgrade (Torx w/ Pin)
See “Hardware” table below for compatibility.
Gaskets
NOTE: Gaskets are included with watertight 1590 enclosures. They can also be purchased as a kit if you’d like to upgrade an IP54 enclosure to IP65. Not available for all sizes.
- Each kit includes two pre-formed silicone gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later.
- Gasket is applied to the lid.
- Designed to meet IP65 with properly installed gasket and lid screws torqued to 25-30 cN.m (36-43 ozf.in).
- Refer to part number table below for correct gasket.
Notes
- Lid height is 0.16″ (4 mm).
SKU: 1590WP -
Discontinued Products
Diecast Aluminum Enclosures 1590-RIBBED Series – (1590WNFBK) (DISCONTINUED)
Features
- Rugged, diecast aluminum alloy (tough – yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
- Includes screws threaded into factory-tapped holes. Screw type and quantity vary. See details below or in drawings.
- Standard versions are designed to meet IP54.
- Water-tight versions are designed to meet IP65 and include a gasket which is supplied loose inside the enclosure (not pre-installed).
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Hardware
NOTE: 1590 series enclosures feature factory-tapped assembly screw holes that accept machine screws, which are included with the enclosures.Replacement Hardware
Tamper-proof Hardware Upgrade (Torx w/ Pin)
See “Hardware” table below for compatibility.
Gaskets
NOTE: Gaskets are included with watertight 1590 enclosures. They can also be purchased as a kit if you’d like to upgrade an IP54 enclosure to IP65. Not available for all sizes.
- Each kit includes two pre-formed silicone gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later.
- Gasket is applied to the lid.
- Designed to meet IP65 with properly installed gasket and lid screws torqued to 25-30 cN.m (36-43 ozf.in).
- Refer to part number table below for correct gasket.
Notes
- Lid height is 0.16″ (4 mm).
SKU: 1590WNFBK -
Discontinued Products
Diecast Aluminum Enclosures 1590-RIBBED Series – (1590NFBK) (DISCONTINUED)
Features
- Rugged, diecast aluminum alloy (tough – yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
- Includes screws threaded into factory-tapped holes. Screw type and quantity vary. See details below or in drawings.
- Standard versions are designed to meet IP54.
- Water-tight versions are designed to meet IP65 and include a gasket which is supplied loose inside the enclosure (not pre-installed).
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Hardware
NOTE: 1590 series enclosures feature factory-tapped assembly screw holes that accept machine screws, which are included with the enclosures.Replacement Hardware
Tamper-proof Hardware Upgrade (Torx w/ Pin)
See “Hardware” table below for compatibility.
Gaskets
NOTE: Gaskets are included with watertight 1590 enclosures. They can also be purchased as a kit if you’d like to upgrade an IP54 enclosure to IP65. Not available for all sizes.
- Each kit includes two pre-formed silicone gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later.
- Gasket is applied to the lid.
- Designed to meet IP65 with properly installed gasket and lid screws torqued to 25-30 cN.m (36-43 ozf.in).
- Refer to part number table below for correct gasket.
Notes
- Lid height is 0.16″ (4 mm).
SKU: 1590NFBK -
Discontinued Products
Diecast Aluminum Enclosures 1590-RIBBED Series – (1590WNFLBK) (DISCONTINUED)
Features
- Rugged, diecast aluminum alloy (tough – yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Unpainted version is vibra finished for a smooth surface with no sharp edges.
- Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance.
- Includes screws threaded into factory-tapped holes. Screw type and quantity vary. See details below or in drawings.
- Standard versions are designed to meet IP54.
- Water-tight versions are designed to meet IP65 and include a gasket which is supplied loose inside the enclosure (not pre-installed).
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Hardware
NOTE: 1590 series enclosures feature factory-tapped assembly screw holes that accept machine screws, which are included with the enclosures.Replacement Hardware
Tamper-proof Hardware Upgrade (Torx w/ Pin)
See “Hardware” table below for compatibility.
Gaskets
NOTE: Gaskets are included with watertight 1590 enclosures. They can also be purchased as a kit if you’d like to upgrade an IP54 enclosure to IP65. Not available for all sizes.
- Each kit includes two pre-formed silicone gaskets.
- Gaskets include adhesive backing for easy installation.
- Allows enclosure to be machined and/or painted first and gasketed later.
- Gasket is applied to the lid.
- Designed to meet IP65 with properly installed gasket and lid screws torqued to 25-30 cN.m (36-43 ozf.in).
- Refer to part number table below for correct gasket.
Notes
- Lid height is 0.16″ (4 mm).
SKU: 1590WNFLBK