American Tech Supply Full Catalog
Showing 2881–2904 of 75476 results
-
Discontinued Products
Type 4X Polyester Wallmount Enclosure PJW Series – (PJEC3630123PT) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Wallmount Enclosure PJW Series – (PJEC3630123PT) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL/cUL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X,12 and 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- 3/8 collar studs are provided for optional inner panel mounting, hardware included. Note: Sizes 36×36″ and larger have 8 collar studs for added stiffness.
- Stainless steel butterfly type “twist latch” door fasteners with padlock provision.
- Captive oil resistant gasket provides a positive seal.
- Integrated mounting flange.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Latch 3 Pt Handle Enclosure Optional Inner Panel Part No. Part No. H W D H W Part No. PJEC363012T PJEC3630123PT 36.48 30.50 12.18 33.00 27.00 18P3327 PJEC363012TW PJEC3630123PTW 36.48 30.50 12.18 33.00 27.00 18P3327 PJW363014L PJW363014L3PT 36.25 30.25 14.13 33.00 27.00 18P3327 PJW363610L PJW363610L3PT 36.25 36.25 10.13 33.00 33.00 18P3333 PJW363614L PJW363614L3PT 36.25 36.25 14.13 33.00 33.00 18P3333 PJW483610L PJW483610L3PT 48.25 36.25 10.13 45.00 33.00 18P4533 PJW483614L PJW483614L3PT 48.25 36.25 14.13 45.00 33.00 18P4533 PJW603610L PJW603610L3PT 60.25 36.25 10.13 57.00 33.00 18P5733 PJW603614L PJW603614L3PT 60.25 36.25 14.13 57.00 33.00 18P5733 SKU: PJEC3630123PT -
Discontinued Products
Type 4X Stainless Steel Wallmount Disconnect Enclosure 1447S N4 SS Series – (1447SN4SSF8) (DISCONTINUED)
Discontinued ProductsType 4X Stainless Steel Wallmount Disconnect Enclosure 1447S N4 SS Series – (1447SN4SSF8) (DISCONTINUED)
Application
- Designed to house the following safety disconnect equipment:
- ABB Controls flange mounted variable depth operating mechanisms for disconnect switches and circuit breakers. Cable version for circuit breakers also available.
- Allen Bradley 1494V variable depth flange mounted disconnect switches and circuit breaker operators NEMA 4 rated. Will not accept Allen Bradley 1494F disconnect switches, 1494D circuit breaker operators or 1494V-R1, -R2, or -W2 operating handles).
- Cutler Hammer C361 variable depth flange mounted disconnect switches and C371 circuit breaker operators. Also Flex-Shaft™ handle mechanisms for circuit breakers. Use Cutler Hammer NEMA 4X rated operating handles to maintain NEMA 4X integrity.
- Siemens I-T-E Max-Flex™ flange mounted variable depth handles for disconnect switch and circuit breakers. Use handle for NEMA 4 rating.
- General Electric Type STDA flange handles and variable depth operating mechanisms for disconnect switches and circuit breakers. Also SpectraFlex™ cable operators for circuit breakers.
- Square D Class 9422 disconnect switches with flange mounted variable depth operating mechanisms or cable mechanisms and Class 9422 flange mounted variable depth operating mechanism or cable mechanisms for circuit breakers. SN4SS enclosures will not accept Square D Class 9422 bracket-mounted disconnect devices, 9422TG1 or TG2 devices.
- Refer to the Type 4 Wallmount Selection Guide.
Standards
- UL 508A Type 3R, 4 and 4X
- CSA Type 3R, 4 and 4X
- Complies with
- NEMA Type 3R, 4, 4X, 12 and 13
- IEC 60529, IP66
- Appropriate components are required to maintain these standards.
Construction
- Formed 14 gauge type 304 stainless steel.
- Continuously welded seams.
- Larger sizes include door and body stiffeners.
- Formed lip on door and enclosure exclude flowing liquids and contaminants.
- Cutouts and holes are provided to suit the flange handle operating mechanism.
- Continuously hinged doors may be removed by pulling the stainless steel hinge pin.
- Door is secured with easily operated stainless steel clamps.
- Cover interlock bracket is welded to the door.
- Collar studs are provided for mounting inner panels.
- A removable 12 gauge inner panel is included.
- Seamless poured-in place gasket.
- A bonding stud is provided on the door and a grounding stud is provided in the enclosure.
- A literature pocket is provided for the inside of the door.
Finish
- Disconnects and operating mechanisms are not provided with the enclosure, and must be ordered separately from the manufacturer.
Accessories
Additional Inner Panels
Door Stop Kit
Floor Stand Kit
Drip Shield Kit
Door Clamping Hardware
Window Kits
Climate Control
Lighting
General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Inner Panel Part No. H W D H W 1447SN4SSB8 24.00 21.38 8.00 21.00 17.00 1447SN4SSC8 24.00 25.38 8.00 21.00 21.00 1447SN4SSE8 30.00 25.38 8.00 27.00 21.00 1447SN4SSF8 36.00 25.38 8.00 33.00 21.00 1447SN4SSG8 36.00 31.38 8.00 33.00 27.00 1447SN4SSH12 42.00 31.38 12.00 39.00 27.00 1447SN4SSJ12 42.00 37.38 12.00 39.00 33.00 1447SN4SSK12 48.00 37.38 12.00 45.00 33.00 1447SN4SSL12 60.00 37.38 12.00 57.00 33.00 SKU: 1447SN4SSF8 - Designed to house the following safety disconnect equipment:
-
Discontinued Products
IP69K/Type 4X Stainless Steel Wallmount Enclosure Waterfall Series – (HWST302412S16) (DISCONTINUED)
Discontinued ProductsIP69K/Type 4X Stainless Steel Wallmount Enclosure Waterfall Series – (HWST302412S16) (DISCONTINUED)
Application
- Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications.
- Sloped top prevents water from resting on top as well as providing potential for controls mounting.
- Unique hinge design allows for easy cleaning in hose-down environments.
- A wide range of sizes and practical accessories make this product line a complete package.
Standards
- UL 508A Type 3R, 4, 4X and 12
- CSA Type 3R, 4, 4X and 12
- NSF – ANSI 169
- Not all accessories shown maintain NSF standard. Some are internal and NSF is not applicable. Refer to each accessory individually or call factory for specifics.
- Complies with
- NEMA 3R, 4, 4X, 12 and 13
- IEC 60529, IP 66, IP69K
Construction
- Formed 304 or 316L stainless steel.
- Top sloped 25°
- Continuously welded seams ground smooth.
- Door stiffeners are provided where required for increased strength and rigidity – designed to also permit additional mounting options.
- Formed lip on enclosure to exclude flowing liquids and contaminants.
- Door latches (316 stainless steel quarter turns) feature the added safety of quarter turn slot requiring use of tool for opening.
- Door hinges (316 stainless steel) are easy to clean, provide 180 degree opening, are easily removed for modifications and are interchangeable.
- Seamless poured-in place gasket.
- Collar studs provided for mounting inner panel.
- Includes hardware kit with panel mounting nuts and sealing washers for wall mounting holes.
- Bonding stud provided on door and grounding stud installed in enclosure.
Finish
- Cover and enclosure are natural stainless steel with a smooth brushed finish.
Videos
Accessories
Additional Inner Panels
Perforated Inner Panels
Mounting Foot Kit
Wallmount Stand-offs
Wash Down Floor Stand Kit
Washdown Quarter Turn Assemblies
Quarter Turn Inserts and Keys
Padlock Adaptor
Door Stop Kit
Floor Stand Kit
Climate Control
Lighting
General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm