American Tech Supply Full Catalog
Showing 2905–2928 of 75476 results
-
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Cabinets, Hammond
Swing-Out Sectional Wall Mount Rack Cabinet HWC Series – (HWC3012UTR)
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Cabinets, HammondSwing-Out Sectional Wall Mount Rack Cabinet HWC Series – (HWC3012UTR)
Looking for a dust-tight cabinet? Add a solid or window door along with the HWCF Cabinet Sealing and Filter Kit.
Features
- Available in three (3) heights, two (2) widths and two (2) depths.
- Optional locking doors are constructed in 16-gauge steel. The door installs in minutes and is available in the vented, tinted window and solid options.
- The main body is constructed in 16-gauge welded steel and includes four (4) vents for optional fans on the sides of the cabinet.
- The main body can be installed to swing from left-to-right or right-to-left.
- Includes one (1) pair of adjustable depth 10-32 tapped EIA compliant mounting rack rails.
- Thirty (30) inch wide mounting rails include cutouts for optional 1U 19″ accessories, such as cable management or power bars.
- 10-32 tapped rails are easy to remove on-site and replace with square hole rails (sold separately) if needed.
- Includes starter pack of SCREW1032-50 screws.
Rear Section Features
- The heavy-duty rear bracket is constructed in 14-gauge welded steel and features a spring-hinge pin for easy installation and removal.
- 2.50” and 2.00” conduit knockouts are located on the side.
- 3.00″, 2.00”, 1.38” and 1.12” conduit knockouts are located on the top and bottom.
- Fan knockouts/cable access is located on the top and bottom.
- Numerous cable management mounting points are included.
- Heavy-duty keyhole for wall mounting.
- Large openings in the rear for cable access.
- Dedicated bonding and grounding points that also provide drill-less mounting of electrical utility boxes. Ground Cable Kit sold separately.
Specifications
- UL Listed 2416 load rated for up to 350 lbs (158 kg). Static Load tested to 1,400 lbs (635 kg).
- Rugged sand-textured black powder paint reduces fingerprints and marks.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements, when the door is installed.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Gallery
Accessories
SKU: HWC3012UTR -
Discontinued Products
Type 4 Two Door Wallmount Enclosure HN4 WM Series – (HN4WM364212GY) (DISCONTINUED)
Discontinued ProductsType 4 Two Door Wallmount Enclosure HN4 WM Series – (HN4WM364212GY) (DISCONTINUED)
Application
- Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in outdoor applications for full weather protection.
Construction
- Formed 12 gauge steel
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Doors are supported with heavy gauge continuous hinges.
- 3-pt padlocking door handle.
- Seamless poured-in place gasket.
- A grounding stud is provided in the enclosure and a bonding stud is provided on the door.
- Center post is removable for easy installation of the inner panel.
Standards
- UL 508A Type 3R, 4, and 12
- CSA Type 3R, 4, and 12
- Complies with
- NEMA Type 3R, 4, 12 and 13
- IEC 60529, IP66
Finish
- Cover and enclosure are phosphatized and finished in recoatable smooth ANSI 61 gray powder coating.
- Removable inner panel is finished in white powder coating.
Accessories
- Mechanical Interlock
- Door Stop Kit
- Barrier Kits for Type 4 Wallmount
- Type 12/4, 4X Handle Kits
- Drip Shield Kit
- Window Kits
- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Inner Panel Part Number H W D H W HN4WM24428GY 24.00 42.00 8.00 21.00 39.00 HN4WM24488GY 24.00 48.00 8.00 21.00 45.00 HN4WM304210GY 30.00 42.00 10.00 27.00 39.00 HN4WM304810GY 30.00 48.00 10.00 27.00 45.00 HN4WM306010GY 30.00 60.00 10.00 27.00 57.00 HN4WM364212GY 36.00 42.00 12.00 33.00 39.00 HN4WM364812GY 36.00 48.00 12.00 33.00 45.00 HN4WM366012GY 36.00 60.00 12.00 33.00 57.00 HN4WM424212GY 42.00 42.00 12.00 39.00 39.00 HN4WM424812GY 42.00 48.00 12.00 39.00 45.00 HN4WM426012GY 42.00 60.00 12.00 38.00 56.00 HN4WM484812GY 48.00 48.00 12.00 44.00 44.00 SKU: HN4WM364212GY -
Discontinued Products
Type 4X Stainless Steel Wallmount Enclosure 1418 N4 SS Series – (1418N4S16K10) (DISCONTINUED)
Discontinued ProductsType 4X Stainless Steel Wallmount Enclosure 1418 N4 SS Series – (1418N4S16K10) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion is a serious problem.
Standards
- UL 508A Type 3R, 4, 4X, and 12
- CSA Type 3R, 4, 4X, and 12
- Complies with
- NEMA Type 3R, 4, 4X, 12 and 13
- IEC 60529, IP66
Construction
- Formed 14 gauge 304 or 316 stainless steel.
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Door stiffeners are provided in the larger enclosures for extra rigidity.
- Welded brackets provide for enclosure mounting.
- Formed lip on door and enclosure excludes flowing liquids and contaminants.
- Stainless steel continuous hinge on door may be removed by pulling the stainless steel hinge pin.
- Door is secured with easily operated stainless steel clamps.
- Provision for padlocking.
- Seamless poured-in place gasket.
- A removable 12 gauge inner panel is included.
- Collar studs are provided for mounting inner panels.
- A bonding stud is provided on the door and a grounding stud is provided in the enclosure.
- A literature pocket is provided for the inside of the door.
Finish
- Cover and enclosure are natural stainless steel with a smooth brushed finish.
- Removable inner panel is finished in white powder coating.
Accessories
- Additional Inner Panels
- Perforated Inner Panels
- Swing Panel Kit
- Door Stop Kit
- Door Clamping Hardware
- Wallmount Quick Release Clamp
- Drip Shield Kit
- Floor Stand Kit
- Window Kits
- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm