American Tech Supply Full Catalog
Showing 2929–2952 of 75476 results
-
Discontinued Products
Type 12 Mild Steel Modular Freestanding Enclosure HME Series – (HME1886) (DISCONTINUED)
Discontinued ProductsType 12 Mild Steel Modular Freestanding Enclosure HME Series – (HME1886) (DISCONTINUED)
Application
- The HME product line provides users with a rugged housing for industrial control and operator interface in industrial environments.
- Modular design permits joining of units together for large scale and mixed use applications.
- Frame’s 25mm hole pattern provides extensive component and accessory mounting flexibility.
- A broad range of industry standard sizes are offered.
Standards
- UL 508A Type 12
- CSA Type 12
- Complies with
- NEMA Type 12
- IEC 60529 IP54
Configuration
- Frame
- Removable solid top panel
- Lifting eyebolts (4)
- Removable bottom panel w/gland plates
- Solid front door with door frame
- Removable rear cover panel
- Inner mounting panel
Construction
- Formed 14 gauge steel.
- Fully welded frame with 25mm hole pattern for superior mounting flexibility.
- Foam gasket on all openings provides a dust-tight seal.
- Reinforced eyebolts are provided for easy enclosure lifting.
- Frames can be joined together with an optional joining kit.
- Doors can be easily interchanged, removed and/or reversed.
- Door opening 135°.
- Optional formed 14 gauge steel side panels are sold separately (in pairs).
- Bonding and grounding studs are provided for all doors and panels.
Finish
- Phosphatized and finished in RAL 7035 light gray powder coating.
- Inner panel is unpainted galvanized 12 gauge steel.
Accessories
- Side Mounting Inner Panels
- Side Mounting Barrier Panels
- Additional Inner Panels
- Bridge Panel
- Grid System
- Mounting Hardware
- HME Handles
- 19″ Rails and Width Adaptor Kit
- Frame Joining Kit
- Side Panels
- Plinth
- Climate Control
- Lighting
- Additional HME Accessories
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: mm. Switch units to: inch
Enclosure Inner Panel Part No. H W D H W HME1465 1400 600 500 1296 499 HME1466 1400 600 600 1296 499 HME1468 1400 600 800 1296 499 HME1485 1400 800 500 1296 699 HME1486 1400 800 600 1296 699 HME1488 1400 800 800 1296 699 HME1665 1600 600 500 1496 499 HME1666 1600 600 600 1496 499 HME1668 1600 600 800 1496 499 HME1685 1600 800 500 1496 699 HME1686 1600 800 600 1496 699 HME1688 1600 800 800 1496 699 HME1864 1800 600 400 1696 499 HME1865 1800 600 500 1696 499 HME1866 1800 600 600 1696 499 HME1868 1800 600 800 1696 499 HME1884 1800 800 400 1696 699 HME1885 1800 800 500 1696 699 HME1886 1800 800 600 1696 699 SKU: HME1886 -
Discontinued Products
IP69K/Type 4X Stainless Steel Wallmount Enclosure Waterfall Series – (HWST36308SS) (DISCONTINUED)
Discontinued ProductsIP69K/Type 4X Stainless Steel Wallmount Enclosure Waterfall Series – (HWST36308SS) (DISCONTINUED)
Application
- Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications.
- Sloped top prevents water from resting on top as well as providing potential for controls mounting.
- Unique hinge design allows for easy cleaning in hose-down environments.
- A wide range of sizes and practical accessories make this product line a complete package.
Standards
- UL 508A Type 3R, 4, 4X and 12
- CSA Type 3R, 4, 4X and 12
- NSF – ANSI 169
- Not all accessories shown maintain NSF standard. Some are internal and NSF is not applicable. Refer to each accessory individually or call factory for specifics.
- Complies with
- NEMA 3R, 4, 4X, 12 and 13
- IEC 60529, IP 66, IP69K
Construction
- Formed 304 or 316L stainless steel.
- Top sloped 25°
- Continuously welded seams ground smooth.
- Door stiffeners are provided where required for increased strength and rigidity – designed to also permit additional mounting options.
- Formed lip on enclosure to exclude flowing liquids and contaminants.
- Door latches (316 stainless steel quarter turns) feature the added safety of quarter turn slot requiring use of tool for opening.
- Door hinges (316 stainless steel) are easy to clean, provide 180 degree opening, are easily removed for modifications and are interchangeable.
- Seamless poured-in place gasket.
- Collar studs provided for mounting inner panel.
- Includes hardware kit with panel mounting nuts and sealing washers for wall mounting holes.
- Bonding stud provided on door and grounding stud installed in enclosure.
Finish
- Cover and enclosure are natural stainless steel with a smooth brushed finish.
Videos
Accessories
- Additional Inner Panels
- Perforated Inner Panels
- Mounting Foot Kit
- Wallmount Stand-offs
- Wash Down Floor Stand Kit
- Washdown Quarter Turn Assemblies
- Quarter Turn Inserts and Keys
- Padlock Adaptor
- Door Stop Kit
- Floor Stand Kit
- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm