American Tech Supply Full Catalog
Showing 3025–3048 of 75476 results
-
Discontinued Products
Type 4, 4X Mild Steel and Stainless Steel Desk Units Series 2000 – (2CLD86043) (DISCONTINUED)
Discontinued ProductsType 4, 4X Mild Steel and Stainless Steel Desk Units Series 2000 – (2CLD86043) (DISCONTINUED)
Application
- Generally used in combination with other modular console components (ie. base, pedestal, and/or turret).
- Provides an ideal sloped surface for mounting keyboards, switches, indicator lights, and/or dials.
- Open top permits mounting of a turret (usually for CRT applications) or an optional hinged desk cover (providing a flat, sturdy desk surface).
- Available in either Standard (will support Standard Turret only) or Deep (will support Deep Turret only) format.
- Smooth lines and clean edges provide an attractive, contemporary appearance.
Standards
- UL 508A Type 3R, 4,12 (Stainless Steel, add 4X)
- CSA Type 3R, 4, 12, 13 (Stainless Steel, add 4X)
- EIA RS-310-D
- Complies with
- NEMA Type 3R, 4, 12 (Stainless Steel, add 4X)
- IEC 60529, IP66
Construction
- Formed 14 gauge steel bodies with 14 gauge steel lid.
- Also offered with formed 14 gauge 304 stainless steel bodies with 14 gauge 304 stainless steel lid.
- Smooth, continuously welded seams without knockouts or holes.
- Body stiffeners are provided where required for increased strength and rigidity.
- Offered in 4 widths 24″, 36″, 48″ and 60″.
- Solid sides and back, lid on sloped top area, open on flat top area, bottom is solid under lid area and open under flat top area.
- Deep Desk has a 6.7″ deeper top opening than standard desk allowing for support of Deep Turret – see drawings as Deep Desk has different profile (angled back) from Standard Desk (flat back.)
- Lid profiles provide increased strength.
- Formed lip on enclosure excludes flowing liquids and contaminants.
- Slotted quarter turn oil-tight latches secure the lid, with optional tamper resistant and locking latches available.
- Stainless steel models utilize stainless steel hardware.
- Oil resistant gaskets are permanently secured.
- Features several internal stud locations for mounting Desk Inner Panel.
- A bonding screw is provided on the lid and a grounding stud is provided in the enclosure.
Finish
- Available in RAL 7035 light gray textured powder coating and natural stainless steel with a smooth, brushed finish.
- Desk covers available in same finishes.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
SKU: 2CLD86043 -
Discontinued Products
Type 12 Mild Steel Freestanding Enclosure 1418 FS Series – (1418W24) (DISCONTINUED)
Discontinued ProductsType 12 Mild Steel Freestanding Enclosure 1418 FS Series – (1418W24) (DISCONTINUED)
Application
- Designed to house electrical, electronic, hydraulic or pneumatic controls with provision for panel mounting or rack mounting of equipment.
- Provides a degree of protection from falling dirt, dust, oil and water.
- Available with front access only or both front and rear access.
- A variety of inner panels, rack mounting rails and swing out frames are available to provide flexibility in mounting arrangements.
Standards
- UL 508A Type 12
- CSA Type 12
- Complies with
- NEMA Type 12
- IEC 60529, IP54
Construction
- Formed 12 gauge steel.
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Lifting eyes provide for easy enclosure handling.
- Doors are supported with heavy gauge continuous hinges.
- Doors are secured with a three point latch and operated with a key locking automotive type handle.
- Latch rods are equipped with rollers for easier door closing.
- Oil resistant gaskets are permanently secured .
- Provision for light kit mounting.
- Mounting channels are welded on the inside of the enclosure for mounting of optional inner panels or rack equipment rails.
- A grounding stud is provided in the enclosure and a bonding stud is provided on the door.
- A literature pocket is provided for the inside of the door (Two pockets are provided for dual access units).
Finish
- Cover and enclosure are phosphatized and finished in recoatable smooth ANSI 61 gray powder coating.
- Optional inner panels, rails, frames and supports are available in white powder coating.
Accessories
Inner Panels
Panel Rails
Swing Out Frames
Door Stop Kit
Window Kits
Climate Control
Lighting
General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Maximum Usable Depth
Units shown: inch. Switch units to: mm
Enclosure Depth Max Usable Depth 18.06 17.80 20.06 19.80 24.06 23.80 30.06 29.80 36.06 35.80 Single Access
Units shown: inch. Switch units to: mm
Enclosure Optional Part No. H W D Full Panel¹ 1418TW18 60.06 24.06 18.06 60TWFW 1418W18 72.06 24.06 18.06 72WFW 1418X18 72.06 30.06 18.06 72XFW 1418Y18 72.06 36.06 18.06 72YFW 1418YW20 90.06 24.06 20.06 90YWFW 1418YY20 90.06 36.06 20.06 90YFW 1418TY24 60.06 36.06 24.06 60TYFW 1418W24 72.06 24.06 24.06 72WFW 1418X24 72.06 30.06 24.06 72XFW 1418Y24 72.06 36.06 24.06 72YFW 1418YY24 90.06 36.06 24.06 90YFW 1418W30 72.06 24.06 30.06 72WFW 1418Y30 72.06 36.06 30.06 72YFW 1418W36 72.06 24.06 36.06 72WFW 1418Y36 72.06 36.06 36.06 72YFW 1418YY36 90.06 36.06 36.06 90YFW SKU: 1418W24 -
Discontinued Products
Type 12 Mild Steel Modular Freestanding Enclosure HME Series – (HME1485) (DISCONTINUED)
Discontinued ProductsType 12 Mild Steel Modular Freestanding Enclosure HME Series – (HME1485) (DISCONTINUED)
Application
- The HME product line provides users with a rugged housing for industrial control and operator interface in industrial environments.
- Modular design permits joining of units together for large scale and mixed use applications.
- Frame’s 25mm hole pattern provides extensive component and accessory mounting flexibility.
- A broad range of industry standard sizes are offered.
Standards
- UL 508A Type 12
- CSA Type 12
- Complies with
- NEMA Type 12
- IEC 60529 IP54
Configuration
- Frame
- Removable solid top panel
- Lifting eyebolts (4)
- Removable bottom panel w/gland plates
- Solid front door with door frame
- Removable rear cover panel
- Inner mounting panel
Construction
- Formed 14 gauge steel.
- Fully welded frame with 25mm hole pattern for superior mounting flexibility.
- Foam gasket on all openings provides a dust-tight seal.
- Reinforced eyebolts are provided for easy enclosure lifting.
- Frames can be joined together with an optional joining kit.
- Doors can be easily interchanged, removed and/or reversed.
- Door opening 135°.
- Optional formed 14 gauge steel side panels are sold separately (in pairs).
- Bonding and grounding studs are provided for all doors and panels.
Finish
- Phosphatized and finished in RAL 7035 light gray powder coating.
- Inner panel is unpainted galvanized 12 gauge steel.
Accessories
Side Mounting Inner Panels
Side Mounting Barrier Panels
Additional Inner Panels
Bridge Panel
Grid System
Mounting Hardware
HME Handles
19″ Rails and Width Adaptor Kit
Frame Joining Kit
Side Panels
Plinth
Climate Control
Lighting
Additional HME Accessories
General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: mm. Switch units to: inch
Enclosure Inner Panel Part No. H W D H W HME1465 1400 600 500 1296 499 HME1466 1400 600 600 1296 499 HME1468 1400 600 800 1296 499 HME1485 1400 800 500 1296 699 HME1486 1400 800 600 1296 699 HME1488 1400 800 800 1296 699 HME1665 1600 600 500 1496 499 HME1666 1600 600 600 1496 499 HME1668 1600 600 800 1496 499 HME1685 1600 800 500 1496 699 HME1686 1600 800 600 1496 699 HME1688 1600 800 800 1496 699 HME1864 1800 600 400 1696 499 HME1865 1800 600 500 1696 499 HME1866 1800 600 600 1696 499 HME1868 1800 600 800 1696 499 HME1884 1800 800 400 1696 699 HME1885 1800 800 500 1696 699 HME1886 1800 800 600 1696 699 SKU: HME1485