American Tech Supply Full Catalog
Showing 70873–70896 of 75476 results
-
InnerDuct Accessories, Couplers, InnerDuct
2.50″ Shur-Lock II Coupler SDR 2.875″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000172 -
InnerDuct Accessories, Couplers, InnerDuct
2.00″ Shur-Lock II Coupler-Extended SDR 2.375″ (8.25″ long vs 5.75″ standard) – Dura-Line
InnerDuct Accessories, Couplers, InnerDuct2.00″ Shur-Lock II Coupler-Extended SDR 2.375″ (8.25″ long vs 5.75″ standard) – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000264 -
InnerDuct Accessories, Couplers, InnerDuct
2.00″ Shur-Lock II Coupler SDR 2.375″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000123 -
InnerDuct Accessories, Couplers, InnerDuct
1.50″ Shur-Lock II Coupler SDR 1.900″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000122 -
InnerDuct Accessories, Couplers, InnerDuct
1.25″ Shur-Lock II Coupler HYB 1.590″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000121 -
InnerDuct Accessories, Couplers, InnerDuct
1.25″ Shur-Lock II Coupler SDR 1.660″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000120 -
InnerDuct Accessories, Pull Tape, InnerDuct
Bull-Line Aramid Woven Pull Tape WK18 1000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line Aramid Pull Tape offers the highest tensile strength per widths along with low elongation. These tapes are also sequentially marked in feet or meters for accurate installation measurements. Bull-Line Aramid Pull Tape is made in the USA.SKU: 20000132 -
Pull Tape, InnerDuct Accessories, InnerDuct
Bull-Line Aramid Woven Pull Tape WK18 5000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line Aramid Pull Tape offers the highest tensile strength per widths along with low elongation. These tapes are also sequentially marked in feet or meters for accurate installation measurements. Bull-Line Aramid Pull Tape is made in the USA.SKU: 20002173 -
InnerDuct Accessories, Pull Tape, InnerDuct
Bull-Line Polyester Pull Tape WP05 10000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line 100% Polyester Pull Tape provides a competitive solution for applications that require a high tensile strength and low elongation. Bull-Line Pull Tape is lightweight and has good blowability. Bull-Line Pull Tape has low burn through resistance in comparison to other brands. An added benefit of all Bull-Line Pull Tapes are the durable print and sequential markings, in both feet or meters, for accurate locating during installation. Bull-Line Pull Tape is made in the USA.SKU: 20000043 -
InnerDuct Accessories, Pull Tape, InnerDuct
Bull-Line Polyester Pull Tape WP05 5000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line 100% Polyester Pull Tape provides a competitive solution for applications that require a high tensile strength and low elongation. Bull-Line Pull Tape is lightweight and has good blowability. Bull-Line Pull Tape has low burn through resistance in comparison to other brands. An added benefit of all Bull-Line Pull Tapes are the durable print and sequential markings, in both feet or meters, for accurate locating during installation. Bull-Line Pull Tape is made in the USA.SKU: 20000045 -
InnerDuct Accessories, Couplers, InnerDuct
1.00″ Clear-Lock PinPoint Splice Kit Couplers – DuraLine
*Please note there may be minimums requirements for all types of innerduct
The Clear-Lock Couplers and PinPoint Splices in one simple package. All the advantages of the Clear-Lock couplers with water-tight connectors for the PinPoint locatable duct in one simple kit. A 2.50″ kit is also available with our new Redi-Lock coupler.SKU: 20005752 -
InnerDuct Accessories, Couplers, InnerDuct
1.25″ Aluminum Threaded Coupler – DuraLine
*Please note there may be minimums requirements for all types of innerduct
Reverse-threaded aluminum coupler. Tapered threads accommodate a wide range of conduit OD’s within a given conduit size. Also available in a Riser/Plenum rated version.SKU: 20001853 -
InnerDuct Accessories, Couplers, InnerDuct
2.00″ Redi-Lock Coupler – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
The latest in Dura-Line’s coupler collection, the Redi-Lock® is ideal for joining lengths of HDPE Sticks but can also be used with continuous length, reeled products.SKU: 20005477 -
InnerDuct Accessories, Couplers, InnerDuct
0.75″ Clear-Lock Coupler – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Experience the same fast and easy installation of our Push-Lock couplers now with a new, clear body design. Simply push the duct ends into the coupler for a locked and air-sealed assembly. Slightly shorter than the original Push-Lock, the Clear-Lock is ideal for pull boxes, vaults or other limited access areas. The non-metallic construction provides excellent corrosion resistance in buried or encased applications and also has desirable dielectric properties.SKU: 20005661 -
InnerDuct Accessories, Couplers, InnerDuct
1.00″ Shur-Lock II Coupler SDR 1.315 – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000118 -
InnerDuct Accessories, Pull Tape, InnerDuct
Bull-Line Aramid Woven Pull Tape WK18 3000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line Aramid Pull Tape offers the highest tensile strength per widths along with low elongation. These tapes are also sequentially marked in feet or meters for accurate installation measurements. Bull-Line Aramid Pull Tape is made in the USA.SKU: 20000036 -
Pull Tape
Bull-Line Locatable Pull Tape WP05LC 5000ft
Bull-Line Locatable Tape is offered with a tracer wire for signal locating. The tracer wire is woven into Bull-Line Polyester Tape and provides a corrosion resistance conductor that is easily spliced in the field. Bull-Line Locatable Tape is made in the USA.SKU: 20000323 -
InnerDuct Accessories, Pull Tape, InnerDuct
Bull-Line Polyester Pull Tape WP05 3000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line 100% Polyester Pull Tape provides a competitive solution for applications that require a high tensile strength and low elongation. Bull-Line Pull Tape is lightweight and has good blowability. Bull-Line Pull Tape has low burn through resistance in comparison to other brands. An added benefit of all Bull-Line Pull Tapes are the durable print and sequential markings, in both feet or meters, for accurate locating during installation. Bull-Line Pull Tape is made in the USA.SKU: 20000044 -
Discontinued Products
24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC50AGA) (DISCONTINUED)
Discontinued Products24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC50AGA) (DISCONTINUED)
Features
- Used as a small 24 volt transformer for relay, pilot lights or low voltage, low power control use.
- 60 Hz. operation.
- Chassis mount.
- With 10″ leads.
- CSA certified (209651)
- UL listed (File #E207860)
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Primary Secondary Secondary VA Overall Dimensions Mounting Hole Current Height Width Depth Centers Voltage Voltage (Amps) (C) (A) (B) (D) PHC50PGA 24 24 VCT 2.08 50 2.63 4.00 2.25 3.56 PHC25JGA 120 24 1.04 25 2.31 3.69 2.13 3.13 PHC50JGA 120 24 2.08 50 2.63 4.00 2.50 3.56 PHC25LGA 208 24 1.04 25 2.31 3.69 2.13 3.13 PHC50LGA 208 24 2.08 50 2.63 4.00 2.50 3.56 PHC25KGA 347 24 1.04 25 2.31 3.69 2.13 3.13 PHC50KGA 347 24 2.08 50 2.63 4.00 2.50 3.56 PHC25FGA 480 24 1.04 25 2.31 3.69 2.13 3.13 PHC50FGA 480 24 2.08 50 2.63 4.00 2.50 3.56 PHC25AGA 600 24 1.04 25 2.31 3.69 2.13 3.13 PHC50AGA 600 24 2.08 50 2.63 4.00 2.50 3.56 SKU: PHC50AGA -
Discontinued Products
24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC25AGA) (DISCONTINUED)
Discontinued Products24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC25AGA) (DISCONTINUED)
Features
- Used as a small 24 volt transformer for relay, pilot lights or low voltage, low power control use.
- 60 Hz. operation.
- Chassis mount.
- With 10″ leads.
- CSA certified (209651)
- UL listed (File #E207860)
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Primary Secondary Secondary VA Overall Dimensions Mounting Hole Current Height Width Depth Centers Voltage Voltage (Amps) (C) (A) (B) (D) PHC50PGA 24 24 VCT 2.08 50 2.63 4.00 2.25 3.56 PHC25JGA 120 24 1.04 25 2.31 3.69 2.13 3.13 PHC50JGA 120 24 2.08 50 2.63 4.00 2.50 3.56 PHC25LGA 208 24 1.04 25 2.31 3.69 2.13 3.13 PHC50LGA 208 24 2.08 50 2.63 4.00 2.50 3.56 PHC25KGA 347 24 1.04 25 2.31 3.69 2.13 3.13 PHC50KGA 347 24 2.08 50 2.63 4.00 2.50 3.56 PHC25FGA 480 24 1.04 25 2.31 3.69 2.13 3.13 PHC50FGA 480 24 2.08 50 2.63 4.00 2.50 3.56 PHC25AGA 600 24 1.04 25 2.31 3.69 2.13 3.13 PHC50AGA 600 24 2.08 50 2.63 4.00 2.50 3.56 SKU: PHC25AGA -
Discontinued Products
24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC50FGA) (DISCONTINUED)
Discontinued Products24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC50FGA) (DISCONTINUED)
Features
- Used as a small 24 volt transformer for relay, pilot lights or low voltage, low power control use.
- 60 Hz. operation.
- Chassis mount.
- With 10″ leads.
- CSA certified (209651)
- UL listed (File #E207860)
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Primary Secondary Secondary VA Overall Dimensions Mounting Hole Current Height Width Depth Centers Voltage Voltage (Amps) (C) (A) (B) (D) PHC50PGA 24 24 VCT 2.08 50 2.63 4.00 2.25 3.56 PHC25JGA 120 24 1.04 25 2.31 3.69 2.13 3.13 PHC50JGA 120 24 2.08 50 2.63 4.00 2.50 3.56 PHC25LGA 208 24 1.04 25 2.31 3.69 2.13 3.13 PHC50LGA 208 24 2.08 50 2.63 4.00 2.50 3.56 PHC25KGA 347 24 1.04 25 2.31 3.69 2.13 3.13 PHC50KGA 347 24 2.08 50 2.63 4.00 2.50 3.56 PHC25FGA 480 24 1.04 25 2.31 3.69 2.13 3.13 PHC50FGA 480 24 2.08 50 2.63 4.00 2.50 3.56 PHC25AGA 600 24 1.04 25 2.31 3.69 2.13 3.13 PHC50AGA 600 24 2.08 50 2.63 4.00 2.50 3.56 SKU: PHC50FGA -
Discontinued Products
24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC25FGA) (DISCONTINUED)
Discontinued Products24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC25FGA) (DISCONTINUED)
Features
- Used as a small 24 volt transformer for relay, pilot lights or low voltage, low power control use.
- 60 Hz. operation.
- Chassis mount.
- With 10″ leads.
- CSA certified (209651)
- UL listed (File #E207860)
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Primary Secondary Secondary VA Overall Dimensions Mounting Hole Current Height Width Depth Centers Voltage Voltage (Amps) (C) (A) (B) (D) PHC50PGA 24 24 VCT 2.08 50 2.63 4.00 2.25 3.56 PHC25JGA 120 24 1.04 25 2.31 3.69 2.13 3.13 PHC50JGA 120 24 2.08 50 2.63 4.00 2.50 3.56 PHC25LGA 208 24 1.04 25 2.31 3.69 2.13 3.13 PHC50LGA 208 24 2.08 50 2.63 4.00 2.50 3.56 PHC25KGA 347 24 1.04 25 2.31 3.69 2.13 3.13 PHC50KGA 347 24 2.08 50 2.63 4.00 2.50 3.56 PHC25FGA 480 24 1.04 25 2.31 3.69 2.13 3.13 PHC50FGA 480 24 2.08 50 2.63 4.00 2.50 3.56 PHC25AGA 600 24 1.04 25 2.31 3.69 2.13 3.13 PHC50AGA 600 24 2.08 50 2.63 4.00 2.50 3.56 SKU: PHC25FGA -
Discontinued Products
24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC50KGA) (DISCONTINUED)
Discontinued Products24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC50KGA) (DISCONTINUED)
Features
- Used as a small 24 volt transformer for relay, pilot lights or low voltage, low power control use.
- 60 Hz. operation.
- Chassis mount.
- With 10″ leads.
- CSA certified (209651)
- UL listed (File #E207860)
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Primary Secondary Secondary VA Overall Dimensions Mounting Hole Current Height Width Depth Centers Voltage Voltage (Amps) (C) (A) (B) (D) PHC50PGA 24 24 VCT 2.08 50 2.63 4.00 2.25 3.56 PHC25JGA 120 24 1.04 25 2.31 3.69 2.13 3.13 PHC50JGA 120 24 2.08 50 2.63 4.00 2.50 3.56 PHC25LGA 208 24 1.04 25 2.31 3.69 2.13 3.13 PHC50LGA 208 24 2.08 50 2.63 4.00 2.50 3.56 PHC25KGA 347 24 1.04 25 2.31 3.69 2.13 3.13 PHC50KGA 347 24 2.08 50 2.63 4.00 2.50 3.56 PHC25FGA 480 24 1.04 25 2.31 3.69 2.13 3.13 PHC50FGA 480 24 2.08 50 2.63 4.00 2.50 3.56 PHC25AGA 600 24 1.04 25 2.31 3.69 2.13 3.13 PHC50AGA 600 24 2.08 50 2.63 4.00 2.50 3.56 SKU: PHC50KGA -
Discontinued Products
24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC25KGA) (DISCONTINUED)
Discontinued Products24V / Small Control Open Style, Chassis Mount – 25 VA to 50 VA PHC Series – (PHC25KGA) (DISCONTINUED)
Features
- Used as a small 24 volt transformer for relay, pilot lights or low voltage, low power control use.
- 60 Hz. operation.
- Chassis mount.
- With 10″ leads.
- CSA certified (209651)
- UL listed (File #E207860)
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Primary Secondary Secondary VA Overall Dimensions Mounting Hole Current Height Width Depth Centers Voltage Voltage (Amps) (C) (A) (B) (D) PHC50PGA 24 24 VCT 2.08 50 2.63 4.00 2.25 3.56 PHC25JGA 120 24 1.04 25 2.31 3.69 2.13 3.13 PHC50JGA 120 24 2.08 50 2.63 4.00 2.50 3.56 PHC25LGA 208 24 1.04 25 2.31 3.69 2.13 3.13 PHC50LGA 208 24 2.08 50 2.63 4.00 2.50 3.56 PHC25KGA 347 24 1.04 25 2.31 3.69 2.13 3.13 PHC50KGA 347 24 2.08 50 2.63 4.00 2.50 3.56 PHC25FGA 480 24 1.04 25 2.31 3.69 2.13 3.13 PHC50FGA 480 24 2.08 50 2.63 4.00 2.50 3.56 PHC25AGA 600 24 1.04 25 2.31 3.69 2.13 3.13 PHC50AGA 600 24 2.08 50 2.63 4.00 2.50 3.56 SKU: PHC25KGA