American Tech Supply Full Catalog
Showing 71233–71256 of 75476 results
-
Discontinued Products
Audio Open Frame 148 Series – (148M) (DISCONTINUED)
Features
- Pin type (0.25″ length & 0.025″ square), P.C. board mount.
- Economical, open type, horizontal bracket construction. 149 Series includes clinching lugs for extra mounting strength.
- Frequency response 200 Hz. – 15 Khz. (+/- 1 db, ref. @ 1 Khz.).
- Total distortion approximately 2% for drivers and 1% for outputs at 200 Hz., decreasing at higher frequencies.
- Insertion loss less than 1/2 db.
- Bifilar wound for balanced capacitive and resistance characteristics, on pin bobbins for standard 0.2″ grid pin spacing.
- Insulation test 250V rms.
- For rugged epoxy cast type units refer to our 102, 104, 106 or 107, 108 and 109 series.
- Net weight: 0.6 oz. (148 Series) & 1.0 oz. (149 Series).
Notes:
1) For output transformers the current figure is for maximum unbalanced current.
2) D.C. resistance shown is for the total primary or secondary windings (ie…if unit contains multiple primary or secondary windings the figure shown is with the windings connected in series).3) Pins are not labeled on the units, but a dot indicates the position of pin 1. The rest of the pins can be determined after reviewing the schematic below.
SKU: 148M -
Discontinued Products
Audio Open Frame 148 Series – (148K) (DISCONTINUED)
Features
- Pin type (0.25″ length & 0.025″ square), P.C. board mount.
- Economical, open type, horizontal bracket construction. 149 Series includes clinching lugs for extra mounting strength.
- Frequency response 200 Hz. – 15 Khz. (+/- 1 db, ref. @ 1 Khz.).
- Total distortion approximately 2% for drivers and 1% for outputs at 200 Hz., decreasing at higher frequencies.
- Insertion loss less than 1/2 db.
- Bifilar wound for balanced capacitive and resistance characteristics, on pin bobbins for standard 0.2″ grid pin spacing.
- Insulation test 250V rms.
- For rugged epoxy cast type units refer to our 102, 104, 106 or 107, 108 and 109 series.
- Net weight: 0.6 oz. (148 Series) & 1.0 oz. (149 Series).
Notes:
1) For output transformers the current figure is for maximum unbalanced current.
2) D.C. resistance shown is for the total primary or secondary windings (ie…if unit contains multiple primary or secondary windings the figure shown is with the windings connected in series).3) Pins are not labeled on the units, but a dot indicates the position of pin 1. The rest of the pins can be determined after reviewing the schematic below.
SKU: 148K -
Discontinued Products
Audio Open Frame 148 Series – (148H) (DISCONTINUED)
Features
- Pin type (0.25″ length & 0.025″ square), P.C. board mount.
- Economical, open type, horizontal bracket construction. 149 Series includes clinching lugs for extra mounting strength.
- Frequency response 200 Hz. – 15 Khz. (+/- 1 db, ref. @ 1 Khz.).
- Total distortion approximately 2% for drivers and 1% for outputs at 200 Hz., decreasing at higher frequencies.
- Insertion loss less than 1/2 db.
- Bifilar wound for balanced capacitive and resistance characteristics, on pin bobbins for standard 0.2″ grid pin spacing.
- Insulation test 250V rms.
- For rugged epoxy cast type units refer to our 102, 104, 106 or 107, 108 and 109 series.
- Net weight: 0.6 oz. (148 Series) & 1.0 oz. (149 Series).
Notes:
1) For output transformers the current figure is for maximum unbalanced current.
2) D.C. resistance shown is for the total primary or secondary windings (ie…if unit contains multiple primary or secondary windings the figure shown is with the windings connected in series).3) Pins are not labeled on the units, but a dot indicates the position of pin 1. The rest of the pins can be determined after reviewing the schematic below.
SKU: 148H -
Discontinued Products
Audio Open Frame 148 Series – (148F) (DISCONTINUED)
Features
- Pin type (0.25″ length & 0.025″ square), P.C. board mount.
- Economical, open type, horizontal bracket construction. 149 Series includes clinching lugs for extra mounting strength.
- Frequency response 200 Hz. – 15 Khz. (+/- 1 db, ref. @ 1 Khz.).
- Total distortion approximately 2% for drivers and 1% for outputs at 200 Hz., decreasing at higher frequencies.
- Insertion loss less than 1/2 db.
- Bifilar wound for balanced capacitive and resistance characteristics, on pin bobbins for standard 0.2″ grid pin spacing.
- Insulation test 250V rms.
- For rugged epoxy cast type units refer to our 102, 104, 106 or 107, 108 and 109 series.
- Net weight: 0.6 oz. (148 Series) & 1.0 oz. (149 Series).
Notes:
1) For output transformers the current figure is for maximum unbalanced current.
2) D.C. resistance shown is for the total primary or secondary windings (ie…if unit contains multiple primary or secondary windings the figure shown is with the windings connected in series).3) Pins are not labeled on the units, but a dot indicates the position of pin 1. The rest of the pins can be determined after reviewing the schematic below.
SKU: 148F -
Discontinued Products
Audio Open Frame 148 Series – (148E) (DISCONTINUED)
Features
- Pin type (0.25″ length & 0.025″ square), P.C. board mount.
- Economical, open type, horizontal bracket construction. 149 Series includes clinching lugs for extra mounting strength.
- Frequency response 200 Hz. – 15 Khz. (+/- 1 db, ref. @ 1 Khz.).
- Total distortion approximately 2% for drivers and 1% for outputs at 200 Hz., decreasing at higher frequencies.
- Insertion loss less than 1/2 db.
- Bifilar wound for balanced capacitive and resistance characteristics, on pin bobbins for standard 0.2″ grid pin spacing.
- Insulation test 250V rms.
- For rugged epoxy cast type units refer to our 102, 104, 106 or 107, 108 and 109 series.
- Net weight: 0.6 oz. (148 Series) & 1.0 oz. (149 Series).
Notes:
1) For output transformers the current figure is for maximum unbalanced current.
2) D.C. resistance shown is for the total primary or secondary windings (ie…if unit contains multiple primary or secondary windings the figure shown is with the windings connected in series).3) Pins are not labeled on the units, but a dot indicates the position of pin 1. The rest of the pins can be determined after reviewing the schematic below.
SKU: 148E -
Discontinued Products
Audio Open Frame 148 Series – (148D) (DISCONTINUED)
Features
- Pin type (0.25″ length & 0.025″ square), P.C. board mount.
- Economical, open type, horizontal bracket construction. 149 Series includes clinching lugs for extra mounting strength.
- Frequency response 200 Hz. – 15 Khz. (+/- 1 db, ref. @ 1 Khz.).
- Total distortion approximately 2% for drivers and 1% for outputs at 200 Hz., decreasing at higher frequencies.
- Insertion loss less than 1/2 db.
- Bifilar wound for balanced capacitive and resistance characteristics, on pin bobbins for standard 0.2″ grid pin spacing.
- Insulation test 250V rms.
- For rugged epoxy cast type units refer to our 102, 104, 106 or 107, 108 and 109 series.
- Net weight: 0.6 oz. (148 Series) & 1.0 oz. (149 Series).
Notes:
1) For output transformers the current figure is for maximum unbalanced current.
2) D.C. resistance shown is for the total primary or secondary windings (ie…if unit contains multiple primary or secondary windings the figure shown is with the windings connected in series).3) Pins are not labeled on the units, but a dot indicates the position of pin 1. The rest of the pins can be determined after reviewing the schematic below.
SKU: 148D -
Discontinued Products
Audio Open Frame 148 Series – (148C) (DISCONTINUED)
Features
- Pin type (0.25″ length & 0.025″ square), P.C. board mount.
- Economical, open type, horizontal bracket construction. 149 Series includes clinching lugs for extra mounting strength.
- Frequency response 200 Hz. – 15 Khz. (+/- 1 db, ref. @ 1 Khz.).
- Total distortion approximately 2% for drivers and 1% for outputs at 200 Hz., decreasing at higher frequencies.
- Insertion loss less than 1/2 db.
- Bifilar wound for balanced capacitive and resistance characteristics, on pin bobbins for standard 0.2″ grid pin spacing.
- Insulation test 250V rms.
- For rugged epoxy cast type units refer to our 102, 104, 106 or 107, 108 and 109 series.
- Net weight: 0.6 oz. (148 Series) & 1.0 oz. (149 Series).
Notes:
1) For output transformers the current figure is for maximum unbalanced current.
2) D.C. resistance shown is for the total primary or secondary windings (ie…if unit contains multiple primary or secondary windings the figure shown is with the windings connected in series).3) Pins are not labeled on the units, but a dot indicates the position of pin 1. The rest of the pins can be determined after reviewing the schematic below.
SKU: 148C -
Discontinued Products
Audio Open Frame 148 Series – (148B) (DISCONTINUED)
Features
- Pin type (0.25″ length & 0.025″ square), P.C. board mount.
- Economical, open type, horizontal bracket construction. 149 Series includes clinching lugs for extra mounting strength.
- Frequency response 200 Hz. – 15 Khz. (+/- 1 db, ref. @ 1 Khz.).
- Total distortion approximately 2% for drivers and 1% for outputs at 200 Hz., decreasing at higher frequencies.
- Insertion loss less than 1/2 db.
- Bifilar wound for balanced capacitive and resistance characteristics, on pin bobbins for standard 0.2″ grid pin spacing.
- Insulation test 250V rms.
- For rugged epoxy cast type units refer to our 102, 104, 106 or 107, 108 and 109 series.
- Net weight: 0.6 oz. (148 Series) & 1.0 oz. (149 Series).
Notes:
1) For output transformers the current figure is for maximum unbalanced current.
2) D.C. resistance shown is for the total primary or secondary windings (ie…if unit contains multiple primary or secondary windings the figure shown is with the windings connected in series).3) Pins are not labeled on the units, but a dot indicates the position of pin 1. The rest of the pins can be determined after reviewing the schematic below.
SKU: 148B -
Discontinued Products
Audio Open Frame 148 Series – (148A) (DISCONTINUED)
Features
- Pin type (0.25″ length & 0.025″ square), P.C. board mount.
- Economical, open type, horizontal bracket construction. 149 Series includes clinching lugs for extra mounting strength.
- Frequency response 200 Hz. – 15 Khz. (+/- 1 db, ref. @ 1 Khz.).
- Total distortion approximately 2% for drivers and 1% for outputs at 200 Hz., decreasing at higher frequencies.
- Insertion loss less than 1/2 db.
- Bifilar wound for balanced capacitive and resistance characteristics, on pin bobbins for standard 0.2″ grid pin spacing.
- Insulation test 250V rms.
- For rugged epoxy cast type units refer to our 102, 104, 106 or 107, 108 and 109 series.
- Net weight: 0.6 oz. (148 Series) & 1.0 oz. (149 Series).
Notes:
1) For output transformers the current figure is for maximum unbalanced current.
2) D.C. resistance shown is for the total primary or secondary windings (ie…if unit contains multiple primary or secondary windings the figure shown is with the windings connected in series).3) Pins are not labeled on the units, but a dot indicates the position of pin 1. The rest of the pins can be determined after reviewing the schematic below.
SKU: 148A -
Discontinued Products
Audio Chassis Mount 143-146 Series – (146S) (DISCONTINUED)
Features
- Small, economical, open, two hole horizontal bracket mount.
- Insulated, color coded flexible leads, 4″ long minimum (143, 144 & 145 Series) or 3″ long minimum (146 Series).
- For a similar, P.C. board mount version, refer to the 148 and 149 series.
- Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
- When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.
- Net weight: 0.5 oz. (143, 144, 146 Series) & 1.4 oz. (145 Series).
SKU: 146S -
Discontinued Products
Audio Chassis Mount 143-146 Series – (146N) (DISCONTINUED)
Features
- Small, economical, open, two hole horizontal bracket mount.
- Insulated, color coded flexible leads, 4″ long minimum (143, 144 & 145 Series) or 3″ long minimum (146 Series).
- For a similar, P.C. board mount version, refer to the 148 and 149 series.
- Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
- When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.
- Net weight: 0.5 oz. (143, 144, 146 Series) & 1.4 oz. (145 Series).
SKU: 146N -
Discontinued Products
Audio Chassis Mount 143-146 Series – (146K) (DISCONTINUED)
Features
- Small, economical, open, two hole horizontal bracket mount.
- Insulated, color coded flexible leads, 4″ long minimum (143, 144 & 145 Series) or 3″ long minimum (146 Series).
- For a similar, P.C. board mount version, refer to the 148 and 149 series.
- Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
- When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.
- Net weight: 0.5 oz. (143, 144, 146 Series) & 1.4 oz. (145 Series).
SKU: 146K -
Discontinued Products
Audio Chassis Mount 143-146 Series – (146J) (DISCONTINUED)
Features
- Small, economical, open, two hole horizontal bracket mount.
- Insulated, color coded flexible leads, 4″ long minimum (143, 144 & 145 Series) or 3″ long minimum (146 Series).
- For a similar, P.C. board mount version, refer to the 148 and 149 series.
- Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
- When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.
- Net weight: 0.5 oz. (143, 144, 146 Series) & 1.4 oz. (145 Series).
SKU: 146J -
Discontinued Products
Audio Chassis Mount 143-146 Series – (146I) (DISCONTINUED)
Features
- Small, economical, open, two hole horizontal bracket mount.
- Insulated, color coded flexible leads, 4″ long minimum (143, 144 & 145 Series) or 3″ long minimum (146 Series).
- For a similar, P.C. board mount version, refer to the 148 and 149 series.
- Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
- When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.
- Net weight: 0.5 oz. (143, 144, 146 Series) & 1.4 oz. (145 Series).
SKU: 146I -
Discontinued Products
Audio Chassis Mount 143-146 Series – (146H) (DISCONTINUED)
Features
- Small, economical, open, two hole horizontal bracket mount.
- Insulated, color coded flexible leads, 4″ long minimum (143, 144 & 145 Series) or 3″ long minimum (146 Series).
- For a similar, P.C. board mount version, refer to the 148 and 149 series.
- Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
- When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.
- Net weight: 0.5 oz. (143, 144, 146 Series) & 1.4 oz. (145 Series).
SKU: 146H -
Discontinued Products
Audio Chassis Mount 143-146 Series – (146G) (DISCONTINUED)
Features
- Small, economical, open, two hole horizontal bracket mount.
- Insulated, color coded flexible leads, 4″ long minimum (143, 144 & 145 Series) or 3″ long minimum (146 Series).
- For a similar, P.C. board mount version, refer to the 148 and 149 series.
- Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
- When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.
- Net weight: 0.5 oz. (143, 144, 146 Series) & 1.4 oz. (145 Series).
SKU: 146G -
Discontinued Products
Audio Chassis Mount 143-146 Series – (146F) (DISCONTINUED)
Features
- Small, economical, open, two hole horizontal bracket mount.
- Insulated, color coded flexible leads, 4″ long minimum (143, 144 & 145 Series) or 3″ long minimum (146 Series).
- For a similar, P.C. board mount version, refer to the 148 and 149 series.
- Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
- When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.
- Net weight: 0.5 oz. (143, 144, 146 Series) & 1.4 oz. (145 Series).
SKU: 146F -
Discontinued Products
Audio Chassis Mount 143-146 Series – (146E) (DISCONTINUED)
Features
- Small, economical, open, two hole horizontal bracket mount.
- Insulated, color coded flexible leads, 4″ long minimum (143, 144 & 145 Series) or 3″ long minimum (146 Series).
- For a similar, P.C. board mount version, refer to the 148 and 149 series.
- Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
- When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.
- Net weight: 0.5 oz. (143, 144, 146 Series) & 1.4 oz. (145 Series).
SKU: 146E -
Discontinued Products
Audio Chassis Mount 143-146 Series – (146D) (DISCONTINUED)
Features
- Small, economical, open, two hole horizontal bracket mount.
- Insulated, color coded flexible leads, 4″ long minimum (143, 144 & 145 Series) or 3″ long minimum (146 Series).
- For a similar, P.C. board mount version, refer to the 148 and 149 series.
- Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
- When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.
- Net weight: 0.5 oz. (143, 144, 146 Series) & 1.4 oz. (145 Series).
SKU: 146D -
Discontinued Products
Audio Chassis Mount 143-146 Series – (146C) (DISCONTINUED)
Features
- Small, economical, open, two hole horizontal bracket mount.
- Insulated, color coded flexible leads, 4″ long minimum (143, 144 & 145 Series) or 3″ long minimum (146 Series).
- For a similar, P.C. board mount version, refer to the 148 and 149 series.
- Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
- When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.
- Net weight: 0.5 oz. (143, 144, 146 Series) & 1.4 oz. (145 Series).
SKU: 146C -
Discontinued Products
Audio Chassis Mount 143-146 Series – (146B) (DISCONTINUED)
Features
- Small, economical, open, two hole horizontal bracket mount.
- Insulated, color coded flexible leads, 4″ long minimum (143, 144 & 145 Series) or 3″ long minimum (146 Series).
- For a similar, P.C. board mount version, refer to the 148 and 149 series.
- Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
- When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.
- Net weight: 0.5 oz. (143, 144, 146 Series) & 1.4 oz. (145 Series).
SKU: 146B -
Discontinued Products
Audio Chassis Mount 143-146 Series – (145R) (DISCONTINUED)
Features
- Small, economical, open, two hole horizontal bracket mount.
- Insulated, color coded flexible leads, 4″ long minimum (143, 144 & 145 Series) or 3″ long minimum (146 Series).
- For a similar, P.C. board mount version, refer to the 148 and 149 series.
- Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
- When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.
- Net weight: 0.5 oz. (143, 144, 146 Series) & 1.4 oz. (145 Series).
SKU: 145R -
Discontinued Products
Audio Chassis Mount 143-146 Series – (145P) (DISCONTINUED)
Features
- Small, economical, open, two hole horizontal bracket mount.
- Insulated, color coded flexible leads, 4″ long minimum (143, 144 & 145 Series) or 3″ long minimum (146 Series).
- For a similar, P.C. board mount version, refer to the 148 and 149 series.
- Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
- When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.
- Net weight: 0.5 oz. (143, 144, 146 Series) & 1.4 oz. (145 Series).
SKU: 145P -
Discontinued Products
Audio Chassis Mount 143-146 Series – (145O) (DISCONTINUED)
Features
- Small, economical, open, two hole horizontal bracket mount.
- Insulated, color coded flexible leads, 4″ long minimum (143, 144 & 145 Series) or 3″ long minimum (146 Series).
- For a similar, P.C. board mount version, refer to the 148 and 149 series.
- Frequency response 150 Hz. to 15 Khz. (+/- 1 db, reference 1000 Hz.)
- When operating at impedances below nominal, power capability and the frequency spectrum are proportionately lower, conversely, at higher impedances power capability and frequency spectrum will be proportionately higher.
- Net weight: 0.5 oz. (143, 144, 146 Series) & 1.4 oz. (145 Series).
SKU: 145O