American Tech Supply Full Catalog
Showing 71305–71328 of 75476 results
-
Discontinued Products
Audio Sound Distribution Line Matching 117 Series – (117K32) (DISCONTINUED)
Features
- Couple 3.2, 8 or 16 ohm speakers to 25 or 70 volt line outputs of amplifiers.
- Up to 5 power tap levels available (except 117F2 which has 4).
- Primary taps marked in watts (no calculation necessary), to match speaker power.
- For speaker matching from older “Classic” 600 Ohm equipment – check out our 119DA matching transformer.
- Frequency response 100 Hz. to 9 Khz. (1 db. reference @1 Khz.)
- Insertion loss less than 2 db.
- Distortion is less than 1.25% @ 100 Hz. at maximum power.
- Horizontal, channel bracket, 2-hole (.187″ dia.) mounting.
- All models have solder lugs, also suitable for slip on jumper connections.
- Total power requirements of speakers should not exceed the rated power of each transformer or rated power of the amplifier.
SKU: 117K32 -
Discontinued Products
Audio Sound Distribution Line Matching 117 Series – (117K16) (DISCONTINUED)
Features
- Couple 3.2, 8 or 16 ohm speakers to 25 or 70 volt line outputs of amplifiers.
- Up to 5 power tap levels available (except 117F2 which has 4).
- Primary taps marked in watts (no calculation necessary), to match speaker power.
- For speaker matching from older “Classic” 600 Ohm equipment – check out our 119DA matching transformer.
- Frequency response 100 Hz. to 9 Khz. (1 db. reference @1 Khz.)
- Insertion loss less than 2 db.
- Distortion is less than 1.25% @ 100 Hz. at maximum power.
- Horizontal, channel bracket, 2-hole (.187″ dia.) mounting.
- All models have solder lugs, also suitable for slip on jumper connections.
- Total power requirements of speakers should not exceed the rated power of each transformer or rated power of the amplifier.
SKU: 117K16 -
Discontinued Products
Audio Sound Distribution Line Matching 117 Series – (117K8) (DISCONTINUED)
Features
- Couple 3.2, 8 or 16 ohm speakers to 25 or 70 volt line outputs of amplifiers.
- Up to 5 power tap levels available (except 117F2 which has 4).
- Primary taps marked in watts (no calculation necessary), to match speaker power.
- For speaker matching from older “Classic” 600 Ohm equipment – check out our 119DA matching transformer.
- Frequency response 100 Hz. to 9 Khz. (1 db. reference @1 Khz.)
- Insertion loss less than 2 db.
- Distortion is less than 1.25% @ 100 Hz. at maximum power.
- Horizontal, channel bracket, 2-hole (.187″ dia.) mounting.
- All models have solder lugs, also suitable for slip on jumper connections.
- Total power requirements of speakers should not exceed the rated power of each transformer or rated power of the amplifier.
SKU: 117K8 -
Discontinued Products
Audio Sound Distribution Line Matching 117 Series – (117J8) (DISCONTINUED)
Features
- Couple 3.2, 8 or 16 ohm speakers to 25 or 70 volt line outputs of amplifiers.
- Up to 5 power tap levels available (except 117F2 which has 4).
- Primary taps marked in watts (no calculation necessary), to match speaker power.
- For speaker matching from older “Classic” 600 Ohm equipment – check out our 119DA matching transformer.
- Frequency response 100 Hz. to 9 Khz. (1 db. reference @1 Khz.)
- Insertion loss less than 2 db.
- Distortion is less than 1.25% @ 100 Hz. at maximum power.
- Horizontal, channel bracket, 2-hole (.187″ dia.) mounting.
- All models have solder lugs, also suitable for slip on jumper connections.
- Total power requirements of speakers should not exceed the rated power of each transformer or rated power of the amplifier.
SKU: 117J8 -
Discontinued Products
Audio Sound Distribution Line Matching 117 Series – (117K4) (DISCONTINUED)
Features
- Couple 3.2, 8 or 16 ohm speakers to 25 or 70 volt line outputs of amplifiers.
- Up to 5 power tap levels available (except 117F2 which has 4).
- Primary taps marked in watts (no calculation necessary), to match speaker power.
- For speaker matching from older “Classic” 600 Ohm equipment – check out our 119DA matching transformer.
- Frequency response 100 Hz. to 9 Khz. (1 db. reference @1 Khz.)
- Insertion loss less than 2 db.
- Distortion is less than 1.25% @ 100 Hz. at maximum power.
- Horizontal, channel bracket, 2-hole (.187″ dia.) mounting.
- All models have solder lugs, also suitable for slip on jumper connections.
- Total power requirements of speakers should not exceed the rated power of each transformer or rated power of the amplifier.
SKU: 117K4 -
Discontinued Products
Audio Sound Distribution Line Matching 117 Series – (117J4) (DISCONTINUED)
Features
- Couple 3.2, 8 or 16 ohm speakers to 25 or 70 volt line outputs of amplifiers.
- Up to 5 power tap levels available (except 117F2 which has 4).
- Primary taps marked in watts (no calculation necessary), to match speaker power.
- For speaker matching from older “Classic” 600 Ohm equipment – check out our 119DA matching transformer.
- Frequency response 100 Hz. to 9 Khz. (1 db. reference @1 Khz.)
- Insertion loss less than 2 db.
- Distortion is less than 1.25% @ 100 Hz. at maximum power.
- Horizontal, channel bracket, 2-hole (.187″ dia.) mounting.
- All models have solder lugs, also suitable for slip on jumper connections.
- Total power requirements of speakers should not exceed the rated power of each transformer or rated power of the amplifier.
SKU: 117J4 -
Discontinued Products
Audio Sound Distribution Line Matching 117 Series – (117F32) (DISCONTINUED)
Features
- Couple 3.2, 8 or 16 ohm speakers to 25 or 70 volt line outputs of amplifiers.
- Up to 5 power tap levels available (except 117F2 which has 4).
- Primary taps marked in watts (no calculation necessary), to match speaker power.
- For speaker matching from older “Classic” 600 Ohm equipment – check out our 119DA matching transformer.
- Frequency response 100 Hz. to 9 Khz. (1 db. reference @1 Khz.)
- Insertion loss less than 2 db.
- Distortion is less than 1.25% @ 100 Hz. at maximum power.
- Horizontal, channel bracket, 2-hole (.187″ dia.) mounting.
- All models have solder lugs, also suitable for slip on jumper connections.
- Total power requirements of speakers should not exceed the rated power of each transformer or rated power of the amplifier.
SKU: 117F32 -
Discontinued Products
Audio Sound Distribution Line Matching 117 Series – (117G16) (DISCONTINUED)
Features
- Couple 3.2, 8 or 16 ohm speakers to 25 or 70 volt line outputs of amplifiers.
- Up to 5 power tap levels available (except 117F2 which has 4).
- Primary taps marked in watts (no calculation necessary), to match speaker power.
- For speaker matching from older “Classic” 600 Ohm equipment – check out our 119DA matching transformer.
- Frequency response 100 Hz. to 9 Khz. (1 db. reference @1 Khz.)
- Insertion loss less than 2 db.
- Distortion is less than 1.25% @ 100 Hz. at maximum power.
- Horizontal, channel bracket, 2-hole (.187″ dia.) mounting.
- All models have solder lugs, also suitable for slip on jumper connections.
- Total power requirements of speakers should not exceed the rated power of each transformer or rated power of the amplifier.
SKU: 117G16 -
Discontinued Products
Audio Sound Distribution Line Matching 117 Series – (117F16) (DISCONTINUED)
Features
- Couple 3.2, 8 or 16 ohm speakers to 25 or 70 volt line outputs of amplifiers.
- Up to 5 power tap levels available (except 117F2 which has 4).
- Primary taps marked in watts (no calculation necessary), to match speaker power.
- For speaker matching from older “Classic” 600 Ohm equipment – check out our 119DA matching transformer.
- Frequency response 100 Hz. to 9 Khz. (1 db. reference @1 Khz.)
- Insertion loss less than 2 db.
- Distortion is less than 1.25% @ 100 Hz. at maximum power.
- Horizontal, channel bracket, 2-hole (.187″ dia.) mounting.
- All models have solder lugs, also suitable for slip on jumper connections.
- Total power requirements of speakers should not exceed the rated power of each transformer or rated power of the amplifier.
SKU: 117F16 -
Discontinued Products
Audio Sound Distribution Line Matching 117 Series – (117E16) (DISCONTINUED)
Features
- Couple 3.2, 8 or 16 ohm speakers to 25 or 70 volt line outputs of amplifiers.
- Up to 5 power tap levels available (except 117F2 which has 4).
- Primary taps marked in watts (no calculation necessary), to match speaker power.
- For speaker matching from older “Classic” 600 Ohm equipment – check out our 119DA matching transformer.
- Frequency response 100 Hz. to 9 Khz. (1 db. reference @1 Khz.)
- Insertion loss less than 2 db.
- Distortion is less than 1.25% @ 100 Hz. at maximum power.
- Horizontal, channel bracket, 2-hole (.187″ dia.) mounting.
- All models have solder lugs, also suitable for slip on jumper connections.
- Total power requirements of speakers should not exceed the rated power of each transformer or rated power of the amplifier.
SKU: 117E16 -
Discontinued Products
Audio Sound Distribution Line Matching 117 Series – (117F8) (DISCONTINUED)
Features
- Couple 3.2, 8 or 16 ohm speakers to 25 or 70 volt line outputs of amplifiers.
- Up to 5 power tap levels available (except 117F2 which has 4).
- Primary taps marked in watts (no calculation necessary), to match speaker power.
- For speaker matching from older “Classic” 600 Ohm equipment – check out our 119DA matching transformer.
- Frequency response 100 Hz. to 9 Khz. (1 db. reference @1 Khz.)
- Insertion loss less than 2 db.
- Distortion is less than 1.25% @ 100 Hz. at maximum power.
- Horizontal, channel bracket, 2-hole (.187″ dia.) mounting.
- All models have solder lugs, also suitable for slip on jumper connections.
- Total power requirements of speakers should not exceed the rated power of each transformer or rated power of the amplifier.
SKU: 117F8 -
Discontinued Products
Audio Sound Distribution Line Matching 117 Series – (117E8) (DISCONTINUED)
Features
- Couple 3.2, 8 or 16 ohm speakers to 25 or 70 volt line outputs of amplifiers.
- Up to 5 power tap levels available (except 117F2 which has 4).
- Primary taps marked in watts (no calculation necessary), to match speaker power.
- For speaker matching from older “Classic” 600 Ohm equipment – check out our 119DA matching transformer.
- Frequency response 100 Hz. to 9 Khz. (1 db. reference @1 Khz.)
- Insertion loss less than 2 db.
- Distortion is less than 1.25% @ 100 Hz. at maximum power.
- Horizontal, channel bracket, 2-hole (.187″ dia.) mounting.
- All models have solder lugs, also suitable for slip on jumper connections.
- Total power requirements of speakers should not exceed the rated power of each transformer or rated power of the amplifier.
SKU: 117E8 -
Discontinued Products
Audio Sound Distribution Line Matching 117 Series – (117F4) (DISCONTINUED)
Features
- Couple 3.2, 8 or 16 ohm speakers to 25 or 70 volt line outputs of amplifiers.
- Up to 5 power tap levels available (except 117F2 which has 4).
- Primary taps marked in watts (no calculation necessary), to match speaker power.
- For speaker matching from older “Classic” 600 Ohm equipment – check out our 119DA matching transformer.
- Frequency response 100 Hz. to 9 Khz. (1 db. reference @1 Khz.)
- Insertion loss less than 2 db.
- Distortion is less than 1.25% @ 100 Hz. at maximum power.
- Horizontal, channel bracket, 2-hole (.187″ dia.) mounting.
- All models have solder lugs, also suitable for slip on jumper connections.
- Total power requirements of speakers should not exceed the rated power of each transformer or rated power of the amplifier.
SKU: 117F4 -
Discontinued Products
Audio Sound Distribution Line Matching 117 Series – (117E4) (DISCONTINUED)
Features
- Couple 3.2, 8 or 16 ohm speakers to 25 or 70 volt line outputs of amplifiers.
- Up to 5 power tap levels available (except 117F2 which has 4).
- Primary taps marked in watts (no calculation necessary), to match speaker power.
- For speaker matching from older “Classic” 600 Ohm equipment – check out our 119DA matching transformer.
- Frequency response 100 Hz. to 9 Khz. (1 db. reference @1 Khz.)
- Insertion loss less than 2 db.
- Distortion is less than 1.25% @ 100 Hz. at maximum power.
- Horizontal, channel bracket, 2-hole (.187″ dia.) mounting.
- All models have solder lugs, also suitable for slip on jumper connections.
- Total power requirements of speakers should not exceed the rated power of each transformer or rated power of the amplifier.
SKU: 117E4 -
Discontinued Products
Audio Sound Distribution Line Matching 117 Series – (117F2) (DISCONTINUED)
Features
- Couple 3.2, 8 or 16 ohm speakers to 25 or 70 volt line outputs of amplifiers.
- Up to 5 power tap levels available (except 117F2 which has 4).
- Primary taps marked in watts (no calculation necessary), to match speaker power.
- For speaker matching from older “Classic” 600 Ohm equipment – check out our 119DA matching transformer.
- Frequency response 100 Hz. to 9 Khz. (1 db. reference @1 Khz.)
- Insertion loss less than 2 db.
- Distortion is less than 1.25% @ 100 Hz. at maximum power.
- Horizontal, channel bracket, 2-hole (.187″ dia.) mounting.
- All models have solder lugs, also suitable for slip on jumper connections.
- Total power requirements of speakers should not exceed the rated power of each transformer or rated power of the amplifier.
SKU: 117F2 -
Discontinued Products
Studio Grade Impedance Matching Transformers 1140 Series – (1140-LU-B) (DISCONTINUED)
Discontinued ProductsStudio Grade Impedance Matching Transformers 1140 Series – (1140-LU-B) (DISCONTINUED)
Features
- Designed with Nickel alloy cores for high performance and Wide Bandwidth
- Frequency Response: 20 Hz – 20 kHz ±0.35 dB, (ref. @ 1 kHz)
- Low distortion at levels up to +27 dBu @ 20 Hz.
- Excellent Shielding – Mu Metal enclosures
- Line Output Transformers are open style (not Mu Metal)
SKU: 1140-LU-B -
Discontinued Products
2W Audio Miniature Epoxy Potted 109 Series – (109T) (DISCONTINUED)
Features
- Perfect for audio input, line matching, isolation or output transformer applications.
- 2 watt (+/- 1.5 db, 300Hz. – 50 KHz.).
- Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187″ length).
- In some models where no center tap is required (on secondary), pin No. 5 is omitted.
- Power level ratings are maximum at lowest frequency rating (see charts & PDF spec. sheets below)
- Power can be increased slightly at higher frequencies. See individual PDF specs. for specifics.
- Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part No. Nominal Impedance (Ohms) D.C. Resistance (Ohms) +/- 20% Max. D.C. Primary Secondary Primary Secondary Unbalance (Pins 1-3) (Pins 4-6) (Pins 1-3) (Pins 4-6) (ma.) 109E 600 ct 3.2 43 0.37 6 109F 600 ct 150 ct 43 15 6 109G 600 ct 250 ct 43 24 6 109H 600 ct 600 ct 43 60 6 109J 1K ct 600 ct 69 60 4.5 109K 1.5K ct 600 ct 105 60 4 109L 10K ct 3.2 700 0.37 1.5 109N 10K ct 600 ct 700 60 1.5 109R 10K ct 1.5K ct 700 150 1.5 109T 10K ct 10K ct 700 1000 1.5 SKU: 109T -
Discontinued Products
2W Audio Miniature Epoxy Potted 109 Series – (109R) (DISCONTINUED)
Features
- Perfect for audio input, line matching, isolation or output transformer applications.
- 2 watt (+/- 1.5 db, 300Hz. – 50 KHz.).
- Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187″ length).
- In some models where no center tap is required (on secondary), pin No. 5 is omitted.
- Power level ratings are maximum at lowest frequency rating (see charts & PDF spec. sheets below)
- Power can be increased slightly at higher frequencies. See individual PDF specs. for specifics.
- Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part No. Nominal Impedance (Ohms) D.C. Resistance (Ohms) +/- 20% Max. D.C. Primary Secondary Primary Secondary Unbalance (Pins 1-3) (Pins 4-6) (Pins 1-3) (Pins 4-6) (ma.) 109E 600 ct 3.2 43 0.37 6 109F 600 ct 150 ct 43 15 6 109G 600 ct 250 ct 43 24 6 109H 600 ct 600 ct 43 60 6 109J 1K ct 600 ct 69 60 4.5 109K 1.5K ct 600 ct 105 60 4 109L 10K ct 3.2 700 0.37 1.5 109N 10K ct 600 ct 700 60 1.5 109R 10K ct 1.5K ct 700 150 1.5 109T 10K ct 10K ct 700 1000 1.5 SKU: 109R -
Discontinued Products
2W Audio Miniature Epoxy Potted 109 Series – (109N) (DISCONTINUED)
Features
- Perfect for audio input, line matching, isolation or output transformer applications.
- 2 watt (+/- 1.5 db, 300Hz. – 50 KHz.).
- Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187″ length).
- In some models where no center tap is required (on secondary), pin No. 5 is omitted.
- Power level ratings are maximum at lowest frequency rating (see charts & PDF spec. sheets below)
- Power can be increased slightly at higher frequencies. See individual PDF specs. for specifics.
- Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part No. Nominal Impedance (Ohms) D.C. Resistance (Ohms) +/- 20% Max. D.C. Primary Secondary Primary Secondary Unbalance (Pins 1-3) (Pins 4-6) (Pins 1-3) (Pins 4-6) (ma.) 109E 600 ct 3.2 43 0.37 6 109F 600 ct 150 ct 43 15 6 109G 600 ct 250 ct 43 24 6 109H 600 ct 600 ct 43 60 6 109J 1K ct 600 ct 69 60 4.5 109K 1.5K ct 600 ct 105 60 4 109L 10K ct 3.2 700 0.37 1.5 109N 10K ct 600 ct 700 60 1.5 109R 10K ct 1.5K ct 700 150 1.5 109T 10K ct 10K ct 700 1000 1.5 SKU: 109N -
Discontinued Products
2W Audio Miniature Epoxy Potted 109 Series – (109L) (DISCONTINUED)
Features
- Perfect for audio input, line matching, isolation or output transformer applications.
- 2 watt (+/- 1.5 db, 300Hz. – 50 KHz.).
- Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187″ length).
- In some models where no center tap is required (on secondary), pin No. 5 is omitted.
- Power level ratings are maximum at lowest frequency rating (see charts & PDF spec. sheets below)
- Power can be increased slightly at higher frequencies. See individual PDF specs. for specifics.
- Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part No. Nominal Impedance (Ohms) D.C. Resistance (Ohms) +/- 20% Max. D.C. Primary Secondary Primary Secondary Unbalance (Pins 1-3) (Pins 4-6) (Pins 1-3) (Pins 4-6) (ma.) 109E 600 ct 3.2 43 0.37 6 109F 600 ct 150 ct 43 15 6 109G 600 ct 250 ct 43 24 6 109H 600 ct 600 ct 43 60 6 109J 1K ct 600 ct 69 60 4.5 109K 1.5K ct 600 ct 105 60 4 109L 10K ct 3.2 700 0.37 1.5 109N 10K ct 600 ct 700 60 1.5 109R 10K ct 1.5K ct 700 150 1.5 109T 10K ct 10K ct 700 1000 1.5 SKU: 109L -
Discontinued Products
2W Audio Miniature Epoxy Potted 109 Series – (109K) (DISCONTINUED)
Features
- Perfect for audio input, line matching, isolation or output transformer applications.
- 2 watt (+/- 1.5 db, 300Hz. – 50 KHz.).
- Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187″ length).
- In some models where no center tap is required (on secondary), pin No. 5 is omitted.
- Power level ratings are maximum at lowest frequency rating (see charts & PDF spec. sheets below)
- Power can be increased slightly at higher frequencies. See individual PDF specs. for specifics.
- Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part No. Nominal Impedance (Ohms) D.C. Resistance (Ohms) +/- 20% Max. D.C. Primary Secondary Primary Secondary Unbalance (Pins 1-3) (Pins 4-6) (Pins 1-3) (Pins 4-6) (ma.) 109E 600 ct 3.2 43 0.37 6 109F 600 ct 150 ct 43 15 6 109G 600 ct 250 ct 43 24 6 109H 600 ct 600 ct 43 60 6 109J 1K ct 600 ct 69 60 4.5 109K 1.5K ct 600 ct 105 60 4 109L 10K ct 3.2 700 0.37 1.5 109N 10K ct 600 ct 700 60 1.5 109R 10K ct 1.5K ct 700 150 1.5 109T 10K ct 10K ct 700 1000 1.5 SKU: 109K -
Discontinued Products
2W Audio Miniature Epoxy Potted 109 Series – (109J) (DISCONTINUED)
Features
- Perfect for audio input, line matching, isolation or output transformer applications.
- 2 watt (+/- 1.5 db, 300Hz. – 50 KHz.).
- Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187″ length).
- In some models where no center tap is required (on secondary), pin No. 5 is omitted.
- Power level ratings are maximum at lowest frequency rating (see charts & PDF spec. sheets below)
- Power can be increased slightly at higher frequencies. See individual PDF specs. for specifics.
- Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part No. Nominal Impedance (Ohms) D.C. Resistance (Ohms) +/- 20% Max. D.C. Primary Secondary Primary Secondary Unbalance (Pins 1-3) (Pins 4-6) (Pins 1-3) (Pins 4-6) (ma.) 109E 600 ct 3.2 43 0.37 6 109F 600 ct 150 ct 43 15 6 109G 600 ct 250 ct 43 24 6 109H 600 ct 600 ct 43 60 6 109J 1K ct 600 ct 69 60 4.5 109K 1.5K ct 600 ct 105 60 4 109L 10K ct 3.2 700 0.37 1.5 109N 10K ct 600 ct 700 60 1.5 109R 10K ct 1.5K ct 700 150 1.5 109T 10K ct 10K ct 700 1000 1.5 SKU: 109J -
Discontinued Products
2W Audio Miniature Epoxy Potted 109 Series – (109H) (DISCONTINUED)
Features
- Perfect for audio input, line matching, isolation or output transformer applications.
- 2 watt (+/- 1.5 db, 300Hz. – 50 KHz.).
- Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187″ length).
- In some models where no center tap is required (on secondary), pin No. 5 is omitted.
- Power level ratings are maximum at lowest frequency rating (see charts & PDF spec. sheets below)
- Power can be increased slightly at higher frequencies. See individual PDF specs. for specifics.
- Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part No. Nominal Impedance (Ohms) D.C. Resistance (Ohms) +/- 20% Max. D.C. Primary Secondary Primary Secondary Unbalance (Pins 1-3) (Pins 4-6) (Pins 1-3) (Pins 4-6) (ma.) 109E 600 ct 3.2 43 0.37 6 109F 600 ct 150 ct 43 15 6 109G 600 ct 250 ct 43 24 6 109H 600 ct 600 ct 43 60 6 109J 1K ct 600 ct 69 60 4.5 109K 1.5K ct 600 ct 105 60 4 109L 10K ct 3.2 700 0.37 1.5 109N 10K ct 600 ct 700 60 1.5 109R 10K ct 1.5K ct 700 150 1.5 109T 10K ct 10K ct 700 1000 1.5 SKU: 109H -
Discontinued Products
2W Audio Miniature Epoxy Potted 109 Series – (109G) (DISCONTINUED)
Features
- Perfect for audio input, line matching, isolation or output transformer applications.
- 2 watt (+/- 1.5 db, 300Hz. – 50 KHz.).
- Epoxy potted in an attractive black molded case, Pin type P.C. board mount (min. 0.187″ length).
- In some models where no center tap is required (on secondary), pin No. 5 is omitted.
- Power level ratings are maximum at lowest frequency rating (see charts & PDF spec. sheets below)
- Power can be increased slightly at higher frequencies. See individual PDF specs. for specifics.
- Will withstand soldering for 10 sec. @ 260 degrees C, ambient temp. 85 degrees C max.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part No. Nominal Impedance (Ohms) D.C. Resistance (Ohms) +/- 20% Max. D.C. Primary Secondary Primary Secondary Unbalance (Pins 1-3) (Pins 4-6) (Pins 1-3) (Pins 4-6) (ma.) 109E 600 ct 3.2 43 0.37 6 109F 600 ct 150 ct 43 15 6 109G 600 ct 250 ct 43 24 6 109H 600 ct 600 ct 43 60 6 109J 1K ct 600 ct 69 60 4.5 109K 1.5K ct 600 ct 105 60 4 109L 10K ct 3.2 700 0.37 1.5 109N 10K ct 600 ct 700 60 1.5 109R 10K ct 1.5K ct 700 150 1.5 109T 10K ct 10K ct 700 1000 1.5 SKU: 109G