American Tech Supply Full Catalog
Showing 71497–71520 of 75476 results
-
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1230BFC) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1230BFC) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1230BFC -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1230BF) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1230BF) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1230BF -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1235BFC) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1235BFC) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1235BFC -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1180BFC) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1180BFC) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1180BFC -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1180BF) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1180BF) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1180BF -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1185BFC) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1185BFC) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1185BFC -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1170BFC) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1170BFC) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1170BFC -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1170BF) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1170BF) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1170BF -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1175BFC) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1175BFC) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1175BFC -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1190BFC) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1190BFC) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1190BFC -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1190BF) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1190BF) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1190BF -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1195BFC) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1195BFC) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1195BFC -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1160BFC) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1160BFC) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1160BFC -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1160BF) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1160BF) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1160BF -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1165BFC) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1165BFC) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1165BFC -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1210BFC) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1210BFC) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1210BFC -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1210BF) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1210BF) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1210BF -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1215BFC) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1215BFC) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1215BFC -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1200BFC) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1200BFC) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1200BFC -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1200BF) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1200BF) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1200BF -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1205BFC) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1205BFC) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1205BFC -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1150BFC) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1150BFC) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1150BFC -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1150BF) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1150BF) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1150BF -
Discontinued Products
Water-Tight ABS & Polycarbonate Enclosures RP Series – (RP1155BFC) (DISCONTINUED)
Discontinued ProductsWater-Tight ABS & Polycarbonate Enclosures RP Series – (RP1155BFC) (DISCONTINUED)
Key Features
- Ideally suited for mounting printed circuit boards or components.
- Choice of two materials:
- General purpose ABS with a flame rating of UL94-HB
- Polycarbonate with a flame rating of UL94-V2
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust, and water.
- Rubber gasket is included and must be field installed.
- Lid includes smooth recessed area for membrane, label or silkscreen.
- Designed to meet IP 65.
- Lid is secured with self captivating M3.5 stainless steel machine screws (included), threaded into corrosion resistant bushings (for repetitive assembly & disassembly).
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options:
- Internal DIN rail mounting tabs
- PC board mounting posts
- Options vary with size, please refer to drawings by clicking on the part numbers below.
- Extra self-tapping M3.5-0.6 x 10mm lid screws: SC619-50
- Extra self-tapping M3 x 6mm PC Board screws: SC622-50
SKU: RP1155BFC