American Tech Supply Full Catalog
Showing 72169–72192 of 75476 results
-
Discontinued Products
ABS Plastic Hand Held/Instrument Enclosures 1593 Series – (1593BBBK) (DISCONTINUED)
Discontinued ProductsABS Plastic Hand Held/Instrument Enclosures 1593 Series – (1593BBBK) (DISCONTINUED)
Key Features:
- Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
- Ergonomically designed for a comfortable fit into the user’s hand.
- Designed to meet IP54 ratings.
- Recessed top for membrane display or pad.
- Units with battery door use our long life “three snap” door.
- Lap joint construction provides protection against dust accumulation and splashing water.
- Molded in a choice of black, grey, or transparent blue general purpose ABS plastic with a satin texture.
- Unit is secured with self tapping screws.
- Black and transparent blue enclosures include black screws, grey includes nickel finish screws.
Notes:
- Due to their low profile design, the 1593S & 1593T models will only accept AAA batteries. The two AAA battery holder kit (below) is the largest holder that will fit.
Contoured Panel Option
Sizes K, L, N, D, & X comes with flat and contoured panels to match the profile of the case..
Battery Compartment Style
Sizes S, P, T, Q, & Y come with an integrated battery compartment and door.
No Panels (Size J Only)
Application Spotlight: Smart Card Reader
The 1593NBK, 1593NGY are designed to house smart card readers (shown with modified end panel).
1593 Series Accessories
Infrared Panels
Sold in packs of 10 panels. See tables below for compatibility.
PC Board
See tables below for compatibility.
Aluminum End Panels
Supplied with plastic protective covering. See tables below for compatibility.
Belt Clip
Plastic clip with nylon screws (for insulation). Includes a drill template for mounting.
1599CLIP (black)
1599CLIPGY (gray)
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Enclosure Part Numbers
Units shown: inch. Switch units to: mm
Part Number Part Number Part Number Removable Battery Length Width Enclosure Black Gray Trans Blue Panels Door Depth 1593VBK 1593VGY 1593VTBU 2 No 2.36 4.13 1.38 1593KBK 1593KGY 1593KTBU 2 No 2.60 2.60 1.10 1593JBK 1593JGY 1593JTBU 0 No 2.60 2.60 1.10 1593ARBK 1593ARGY 1593ARTBU 2 No 2.95 2.91 1.06 1593SBK 1593SGY 1593STBU 1 Yes 3.60 2.60 0.83 1593PBK 1593PGY 1593PTBU 1 Yes 3.60 2.60 1.10 1593LBK 1593LGY 1593LTBU 2 No 3.60 2.60 1.10 1593BBBK 1593BBGY 1593BBTBU 2 No 3.75 3.00 1.18 1593NBK 1593NGY 1593NTBU 2 No 4.30 2.90 1.00 1593WBK 1593WGY 1593WTBU 2 No 4.33 4.13 1.38 1593TBK 1593TGY 1593TTBU 1 Yes 4.40 2.60 0.83 1593QBK 1593QGY 1593QTBU 1 Yes 4.40 2.60 1.10 1593DBK 1593DGY 1593DTBU 2 No 4.50 1.40 1.00 1593YBK 1593YGY 1593YTBU 1 Yes 5.50 2.60 1.10 1593XBK 1593XGY 1593XTBU 2 No 5.50 2.60 1.10 Replacement Screws & Accessories
Enclosure Part Number Silver Assembly Black Assembly PC Board Mouting Screws IR Panels Aluminum Panels PC Board Beginning With Screws (100-pack) Screws (100-pack) (50-pack) (10-pack) (10-pack) (enclosure sold separately) 1593K 1593QS100 SKU: 1593BBBK -
Discontinued Products
ABS Plastic Hand Held/Instrument Enclosures 1593 Series – (1593LBK) (DISCONTINUED)
Discontinued ProductsABS Plastic Hand Held/Instrument Enclosures 1593 Series – (1593LBK) (DISCONTINUED)
Key Features:
- Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
- Ergonomically designed for a comfortable fit into the user’s hand.
- Designed to meet IP54 ratings.
- Recessed top for membrane display or pad.
- Units with battery door use our long life “three snap” door.
- Lap joint construction provides protection against dust accumulation and splashing water.
- Molded in a choice of black, grey, or transparent blue general purpose ABS plastic with a satin texture.
- Unit is secured with self tapping screws.
- Black and transparent blue enclosures include black screws, grey includes nickel finish screws.
Notes:
- Due to their low profile design, the 1593S & 1593T models will only accept AAA batteries. The two AAA battery holder kit (below) is the largest holder that will fit.
Contoured Panel Option
Sizes K, L, N, D, & X comes with flat and contoured panels to match the profile of the case..
Battery Compartment Style
Sizes S, P, T, Q, & Y come with an integrated battery compartment and door.
No Panels (Size J Only)
Application Spotlight: Smart Card Reader
The 1593NBK, 1593NGY are designed to house smart card readers (shown with modified end panel).
1593 Series Accessories
Infrared Panels
Sold in packs of 10 panels. See tables below for compatibility.
PC Board
See tables below for compatibility.
Aluminum End Panels
Supplied with plastic protective covering. See tables below for compatibility.
Belt Clip
Plastic clip with nylon screws (for insulation). Includes a drill template for mounting.
1599CLIP (black)
1599CLIPGY (gray)
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Enclosure Part Numbers
Units shown: inch. Switch units to: mm
Part Number Part Number Part Number Removable Battery Length Width Enclosure Black Gray Trans Blue Panels Door Depth 1593VBK 1593VGY 1593VTBU 2 No 2.36 4.13 1.38 1593KBK 1593KGY 1593KTBU 2 No 2.60 2.60 1.10 1593JBK 1593JGY 1593JTBU 0 No 2.60 2.60 1.10 1593ARBK 1593ARGY 1593ARTBU 2 No 2.95 2.91 1.06 1593SBK 1593SGY 1593STBU 1 Yes 3.60 2.60 0.83 1593PBK 1593PGY 1593PTBU 1 Yes 3.60 2.60 1.10 1593LBK 1593LGY 1593LTBU 2 No 3.60 2.60 1.10 1593BBBK 1593BBGY 1593BBTBU 2 No 3.75 3.00 1.18 1593NBK 1593NGY 1593NTBU 2 No 4.30 2.90 1.00 1593WBK 1593WGY 1593WTBU 2 No 4.33 4.13 1.38 1593TBK 1593TGY 1593TTBU 1 Yes 4.40 2.60 0.83 1593QBK 1593QGY 1593QTBU 1 Yes 4.40 2.60 1.10 1593DBK 1593DGY 1593DTBU 2 No 4.50 1.40 1.00 1593YBK 1593YGY 1593YTBU 1 Yes 5.50 2.60 1.10 1593XBK 1593XGY 1593XTBU 2 No 5.50 2.60 1.10 Replacement Screws & Accessories
Enclosure Part Number Silver Assembly Black Assembly PC Board Mouting Screws IR Panels Aluminum Panels PC Board Beginning With Screws (100-pack) Screws (100-pack) (50-pack) (10-pack) (10-pack) (enclosure sold separately) 1593K 1593QS100 SKU: 1593LBK -
Discontinued Products
ABS Plastic Hand Held/Instrument Enclosures 1593 Series – (1593PBK) (DISCONTINUED)
Discontinued ProductsABS Plastic Hand Held/Instrument Enclosures 1593 Series – (1593PBK) (DISCONTINUED)
Key Features:
- Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
- Ergonomically designed for a comfortable fit into the user’s hand.
- Designed to meet IP54 ratings.
- Recessed top for membrane display or pad.
- Units with battery door use our long life “three snap” door.
- Lap joint construction provides protection against dust accumulation and splashing water.
- Molded in a choice of black, grey, or transparent blue general purpose ABS plastic with a satin texture.
- Unit is secured with self tapping screws.
- Black and transparent blue enclosures include black screws, grey includes nickel finish screws.
Notes:
- Due to their low profile design, the 1593S & 1593T models will only accept AAA batteries. The two AAA battery holder kit (below) is the largest holder that will fit.
Contoured Panel Option
Sizes K, L, N, D, & X comes with flat and contoured panels to match the profile of the case..
Battery Compartment Style
Sizes S, P, T, Q, & Y come with an integrated battery compartment and door.
No Panels (Size J Only)
Application Spotlight: Smart Card Reader
The 1593NBK, 1593NGY are designed to house smart card readers (shown with modified end panel).
1593 Series Accessories
Infrared Panels
Sold in packs of 10 panels. See tables below for compatibility.
PC Board
See tables below for compatibility.
Aluminum End Panels
Supplied with plastic protective covering. See tables below for compatibility.
Belt Clip
Plastic clip with nylon screws (for insulation). Includes a drill template for mounting.
1599CLIP (black)
1599CLIPGY (gray)
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Enclosure Part Numbers
Units shown: inch. Switch units to: mm
Part Number Part Number Part Number Removable Battery Length Width Enclosure Black Gray Trans Blue Panels Door Depth 1593VBK 1593VGY 1593VTBU 2 No 2.36 4.13 1.38 1593KBK 1593KGY 1593KTBU 2 No 2.60 2.60 1.10 1593JBK 1593JGY 1593JTBU 0 No 2.60 2.60 1.10 1593ARBK 1593ARGY 1593ARTBU 2 No 2.95 2.91 1.06 1593SBK 1593SGY 1593STBU 1 Yes 3.60 2.60 0.83 1593PBK 1593PGY 1593PTBU 1 Yes 3.60 2.60 1.10 1593LBK 1593LGY 1593LTBU 2 No 3.60 2.60 1.10 1593BBBK 1593BBGY 1593BBTBU 2 No 3.75 3.00 1.18 1593NBK 1593NGY 1593NTBU 2 No 4.30 2.90 1.00 1593WBK 1593WGY 1593WTBU 2 No 4.33 4.13 1.38 1593TBK 1593TGY 1593TTBU 1 Yes 4.40 2.60 0.83 1593QBK 1593QGY 1593QTBU 1 Yes 4.40 2.60 1.10 1593DBK 1593DGY 1593DTBU 2 No 4.50 1.40 1.00 1593YBK 1593YGY 1593YTBU 1 Yes 5.50 2.60 1.10 1593XBK 1593XGY 1593XTBU 2 No 5.50 2.60 1.10 Replacement Screws & Accessories
Enclosure Part Number Silver Assembly Black Assembly PC Board Mouting Screws IR Panels Aluminum Panels PC Board Beginning With Screws (100-pack) Screws (100-pack) (50-pack) (10-pack) (10-pack) (enclosure sold separately) 1593K 1593QS100 SKU: 1593PBK -
Discontinued Products
ABS Plastic Hand Held/Instrument Enclosures 1593 Series – (1593SBK) (DISCONTINUED)
Discontinued ProductsABS Plastic Hand Held/Instrument Enclosures 1593 Series – (1593SBK) (DISCONTINUED)
Key Features:
- Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
- Ergonomically designed for a comfortable fit into the user’s hand.
- Designed to meet IP54 ratings.
- Recessed top for membrane display or pad.
- Units with battery door use our long life “three snap” door.
- Lap joint construction provides protection against dust accumulation and splashing water.
- Molded in a choice of black, grey, or transparent blue general purpose ABS plastic with a satin texture.
- Unit is secured with self tapping screws.
- Black and transparent blue enclosures include black screws, grey includes nickel finish screws.
Notes:
- Due to their low profile design, the 1593S & 1593T models will only accept AAA batteries. The two AAA battery holder kit (below) is the largest holder that will fit.
Contoured Panel Option
Sizes K, L, N, D, & X comes with flat and contoured panels to match the profile of the case..
Battery Compartment Style
Sizes S, P, T, Q, & Y come with an integrated battery compartment and door.
No Panels (Size J Only)
Application Spotlight: Smart Card Reader
The 1593NBK, 1593NGY are designed to house smart card readers (shown with modified end panel).
1593 Series Accessories
Infrared Panels
Sold in packs of 10 panels. See tables below for compatibility.
PC Board
See tables below for compatibility.
Aluminum End Panels
Supplied with plastic protective covering. See tables below for compatibility.
Belt Clip
Plastic clip with nylon screws (for insulation). Includes a drill template for mounting.
1599CLIP (black)
1599CLIPGY (gray)
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Enclosure Part Numbers
Units shown: inch. Switch units to: mm
Part Number Part Number Part Number Removable Battery Length Width Enclosure Black Gray Trans Blue Panels Door Depth 1593VBK 1593VGY 1593VTBU 2 No 2.36 4.13 1.38 1593KBK 1593KGY 1593KTBU 2 No 2.60 2.60 1.10 1593JBK 1593JGY 1593JTBU 0 No 2.60 2.60 1.10 1593ARBK 1593ARGY 1593ARTBU 2 No 2.95 2.91 1.06 1593SBK 1593SGY 1593STBU 1 Yes 3.60 2.60 0.83 1593PBK 1593PGY 1593PTBU 1 Yes 3.60 2.60 1.10 1593LBK 1593LGY 1593LTBU 2 No 3.60 2.60 1.10 1593BBBK 1593BBGY 1593BBTBU 2 No 3.75 3.00 1.18 1593NBK 1593NGY 1593NTBU 2 No 4.30 2.90 1.00 1593WBK 1593WGY 1593WTBU 2 No 4.33 4.13 1.38 1593TBK 1593TGY 1593TTBU 1 Yes 4.40 2.60 0.83 1593QBK 1593QGY 1593QTBU 1 Yes 4.40 2.60 1.10 1593DBK 1593DGY 1593DTBU 2 No 4.50 1.40 1.00 1593YBK 1593YGY 1593YTBU 1 Yes 5.50 2.60 1.10 1593XBK 1593XGY 1593XTBU 2 No 5.50 2.60 1.10 Replacement Screws & Accessories
Enclosure Part Number Silver Assembly Black Assembly PC Board Mouting Screws IR Panels Aluminum Panels PC Board Beginning With Screws (100-pack) Screws (100-pack) (50-pack) (10-pack) (10-pack) (enclosure sold separately) 1593K 1593QS100 SKU: 1593SBK -
Discontinued Products
ABS Plastic Hand Held/Instrument Enclosures 1593 Series – (1593ARBK) (DISCONTINUED)
Discontinued ProductsABS Plastic Hand Held/Instrument Enclosures 1593 Series – (1593ARBK) (DISCONTINUED)
Key Features:
- Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
- Ergonomically designed for a comfortable fit into the user’s hand.
- Designed to meet IP54 ratings.
- Recessed top for membrane display or pad.
- Units with battery door use our long life “three snap” door.
- Lap joint construction provides protection against dust accumulation and splashing water.
- Molded in a choice of black, grey, or transparent blue general purpose ABS plastic with a satin texture.
- Unit is secured with self tapping screws.
- Black and transparent blue enclosures include black screws, grey includes nickel finish screws.
Notes:
- Due to their low profile design, the 1593S & 1593T models will only accept AAA batteries. The two AAA battery holder kit (below) is the largest holder that will fit.
Contoured Panel Option
Sizes K, L, N, D, & X comes with flat and contoured panels to match the profile of the case..
Battery Compartment Style
Sizes S, P, T, Q, & Y come with an integrated battery compartment and door.
No Panels (Size J Only)
Application Spotlight: Smart Card Reader
The 1593NBK, 1593NGY are designed to house smart card readers (shown with modified end panel).
1593 Series Accessories
Infrared Panels
Sold in packs of 10 panels. See tables below for compatibility.
PC Board
See tables below for compatibility.
Aluminum End Panels
Supplied with plastic protective covering. See tables below for compatibility.
Belt Clip
Plastic clip with nylon screws (for insulation). Includes a drill template for mounting.
1599CLIP (black)
1599CLIPGY (gray)
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Enclosure Part Numbers
Units shown: inch. Switch units to: mm
Part Number Part Number Part Number Removable Battery Length Width Enclosure Black Gray Trans Blue Panels Door Depth 1593VBK 1593VGY 1593VTBU 2 No 2.36 4.13 1.38 1593KBK 1593KGY 1593KTBU 2 No 2.60 2.60 1.10 1593JBK 1593JGY 1593JTBU 0 No 2.60 2.60 1.10 1593ARBK 1593ARGY 1593ARTBU 2 No 2.95 2.91 1.06 1593SBK 1593SGY 1593STBU 1 Yes 3.60 2.60 0.83 1593PBK 1593PGY 1593PTBU 1 Yes 3.60 2.60 1.10 1593LBK 1593LGY 1593LTBU 2 No 3.60 2.60 1.10 1593BBBK 1593BBGY 1593BBTBU 2 No 3.75 3.00 1.18 1593NBK 1593NGY 1593NTBU 2 No 4.30 2.90 1.00 1593WBK 1593WGY 1593WTBU 2 No 4.33 4.13 1.38 1593TBK 1593TGY 1593TTBU 1 Yes 4.40 2.60 0.83 1593QBK 1593QGY 1593QTBU 1 Yes 4.40 2.60 1.10 1593DBK 1593DGY 1593DTBU 2 No 4.50 1.40 1.00 1593YBK 1593YGY 1593YTBU 1 Yes 5.50 2.60 1.10 1593XBK 1593XGY 1593XTBU 2 No 5.50 2.60 1.10 Replacement Screws & Accessories
Enclosure Part Number Silver Assembly Black Assembly PC Board Mouting Screws IR Panels Aluminum Panels PC Board Beginning With Screws (100-pack) Screws (100-pack) (50-pack) (10-pack) (10-pack) (enclosure sold separately) 1593K 1593QS100 SKU: 1593ARBK -
Discontinued Products
ABS Plastic Hand Held/Instrument Enclosures 1593 Series – (1593JBK) (DISCONTINUED)
Discontinued ProductsABS Plastic Hand Held/Instrument Enclosures 1593 Series – (1593JBK) (DISCONTINUED)
Key Features:
- Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
- Ergonomically designed for a comfortable fit into the user’s hand.
- Designed to meet IP54 ratings.
- Recessed top for membrane display or pad.
- Units with battery door use our long life “three snap” door.
- Lap joint construction provides protection against dust accumulation and splashing water.
- Molded in a choice of black, grey, or transparent blue general purpose ABS plastic with a satin texture.
- Unit is secured with self tapping screws.
- Black and transparent blue enclosures include black screws, grey includes nickel finish screws.
Notes:
- Due to their low profile design, the 1593S & 1593T models will only accept AAA batteries. The two AAA battery holder kit (below) is the largest holder that will fit.
Contoured Panel Option
Sizes K, L, N, D, & X comes with flat and contoured panels to match the profile of the case..
Battery Compartment Style
Sizes S, P, T, Q, & Y come with an integrated battery compartment and door.
No Panels (Size J Only)
Application Spotlight: Smart Card Reader
The 1593NBK, 1593NGY are designed to house smart card readers (shown with modified end panel).
1593 Series Accessories
Infrared Panels
Sold in packs of 10 panels. See tables below for compatibility.
PC Board
See tables below for compatibility.
Aluminum End Panels
Supplied with plastic protective covering. See tables below for compatibility.
Belt Clip
Plastic clip with nylon screws (for insulation). Includes a drill template for mounting.
1599CLIP (black)
1599CLIPGY (gray)
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Enclosure Part Numbers
Units shown: inch. Switch units to: mm
Part Number Part Number Part Number Removable Battery Length Width Enclosure Black Gray Trans Blue Panels Door Depth 1593VBK 1593VGY 1593VTBU 2 No 2.36 4.13 1.38 1593KBK 1593KGY 1593KTBU 2 No 2.60 2.60 1.10 1593JBK 1593JGY 1593JTBU 0 No 2.60 2.60 1.10 1593ARBK 1593ARGY 1593ARTBU 2 No 2.95 2.91 1.06 1593SBK 1593SGY 1593STBU 1 Yes 3.60 2.60 0.83 1593PBK 1593PGY 1593PTBU 1 Yes 3.60 2.60 1.10 1593LBK 1593LGY 1593LTBU 2 No 3.60 2.60 1.10 1593BBBK 1593BBGY 1593BBTBU 2 No 3.75 3.00 1.18 1593NBK 1593NGY 1593NTBU 2 No 4.30 2.90 1.00 1593WBK 1593WGY 1593WTBU 2 No 4.33 4.13 1.38 1593TBK 1593TGY 1593TTBU 1 Yes 4.40 2.60 0.83 1593QBK 1593QGY 1593QTBU 1 Yes 4.40 2.60 1.10 1593DBK 1593DGY 1593DTBU 2 No 4.50 1.40 1.00 1593YBK 1593YGY 1593YTBU 1 Yes 5.50 2.60 1.10 1593XBK 1593XGY 1593XTBU 2 No 5.50 2.60 1.10 Replacement Screws & Accessories
Enclosure Part Number Silver Assembly Black Assembly PC Board Mouting Screws IR Panels Aluminum Panels PC Board Beginning With Screws (100-pack) Screws (100-pack) (50-pack) (10-pack) (10-pack) (enclosure sold separately) 1593K 1593QS100 SKU: 1593JBK -
Discontinued Products
ABS Plastic Hand Held/Instrument Enclosures 1593 Series – (1593KBK) (DISCONTINUED)
Discontinued ProductsABS Plastic Hand Held/Instrument Enclosures 1593 Series – (1593KBK) (DISCONTINUED)
Key Features:
- Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
- Ergonomically designed for a comfortable fit into the user’s hand.
- Designed to meet IP54 ratings.
- Recessed top for membrane display or pad.
- Units with battery door use our long life “three snap” door.
- Lap joint construction provides protection against dust accumulation and splashing water.
- Molded in a choice of black, grey, or transparent blue general purpose ABS plastic with a satin texture.
- Unit is secured with self tapping screws.
- Black and transparent blue enclosures include black screws, grey includes nickel finish screws.
Notes:
- Due to their low profile design, the 1593S & 1593T models will only accept AAA batteries. The two AAA battery holder kit (below) is the largest holder that will fit.
Contoured Panel Option
Sizes K, L, N, D, & X comes with flat and contoured panels to match the profile of the case..
Battery Compartment Style
Sizes S, P, T, Q, & Y come with an integrated battery compartment and door.
No Panels (Size J Only)
Application Spotlight: Smart Card Reader
The 1593NBK, 1593NGY are designed to house smart card readers (shown with modified end panel).
1593 Series Accessories
Infrared Panels
Sold in packs of 10 panels. See tables below for compatibility.
PC Board
See tables below for compatibility.
Aluminum End Panels
Supplied with plastic protective covering. See tables below for compatibility.
Belt Clip
Plastic clip with nylon screws (for insulation). Includes a drill template for mounting.
1599CLIP (black)
1599CLIPGY (gray)
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Enclosure Part Numbers
Units shown: inch. Switch units to: mm
Part Number Part Number Part Number Removable Battery Length Width Enclosure Black Gray Trans Blue Panels Door Depth 1593VBK 1593VGY 1593VTBU 2 No 2.36 4.13 1.38 1593KBK 1593KGY 1593KTBU 2 No 2.60 2.60 1.10 1593JBK 1593JGY 1593JTBU 0 No 2.60 2.60 1.10 1593ARBK 1593ARGY 1593ARTBU 2 No 2.95 2.91 1.06 1593SBK 1593SGY 1593STBU 1 Yes 3.60 2.60 0.83 1593PBK 1593PGY 1593PTBU 1 Yes 3.60 2.60 1.10 1593LBK 1593LGY 1593LTBU 2 No 3.60 2.60 1.10 1593BBBK 1593BBGY 1593BBTBU 2 No 3.75 3.00 1.18 1593NBK 1593NGY 1593NTBU 2 No 4.30 2.90 1.00 1593WBK 1593WGY 1593WTBU 2 No 4.33 4.13 1.38 1593TBK 1593TGY 1593TTBU 1 Yes 4.40 2.60 0.83 1593QBK 1593QGY 1593QTBU 1 Yes 4.40 2.60 1.10 1593DBK 1593DGY 1593DTBU 2 No 4.50 1.40 1.00 1593YBK 1593YGY 1593YTBU 1 Yes 5.50 2.60 1.10 1593XBK 1593XGY 1593XTBU 2 No 5.50 2.60 1.10 Replacement Screws & Accessories
Enclosure Part Number Silver Assembly Black Assembly PC Board Mouting Screws IR Panels Aluminum Panels PC Board Beginning With Screws (100-pack) Screws (100-pack) (50-pack) (10-pack) (10-pack) (enclosure sold separately) 1593K 1593QS100 SKU: 1593KBK -
Discontinued Products
ABS Plastic Hand Held/Instrument Enclosures 1593 Series – (1593VBK) (DISCONTINUED)
Discontinued ProductsABS Plastic Hand Held/Instrument Enclosures 1593 Series – (1593VBK) (DISCONTINUED)
Key Features:
- Electronic instrument enclosures, ideally suited for mounting printed circuit boards.
- Ergonomically designed for a comfortable fit into the user’s hand.
- Designed to meet IP54 ratings.
- Recessed top for membrane display or pad.
- Units with battery door use our long life “three snap” door.
- Lap joint construction provides protection against dust accumulation and splashing water.
- Molded in a choice of black, grey, or transparent blue general purpose ABS plastic with a satin texture.
- Unit is secured with self tapping screws.
- Black and transparent blue enclosures include black screws, grey includes nickel finish screws.
Notes:
- Due to their low profile design, the 1593S & 1593T models will only accept AAA batteries. The two AAA battery holder kit (below) is the largest holder that will fit.
Contoured Panel Option
Sizes K, L, N, D, & X comes with flat and contoured panels to match the profile of the case..
Battery Compartment Style
Sizes S, P, T, Q, & Y come with an integrated battery compartment and door.
No Panels (Size J Only)
Application Spotlight: Smart Card Reader
The 1593NBK, 1593NGY are designed to house smart card readers (shown with modified end panel).
1593 Series Accessories
Infrared Panels
Sold in packs of 10 panels. See tables below for compatibility.
PC Board
See tables below for compatibility.
Aluminum End Panels
Supplied with plastic protective covering. See tables below for compatibility.
Belt Clip
Plastic clip with nylon screws (for insulation). Includes a drill template for mounting.
1599CLIP (black)
1599CLIPGY (gray)
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Enclosure Part Numbers
Units shown: inch. Switch units to: mm
Part Number Part Number Part Number Removable Battery Length Width Enclosure Black Gray Trans Blue Panels Door Depth 1593VBK 1593VGY 1593VTBU 2 No 2.36 4.13 1.38 1593KBK 1593KGY 1593KTBU 2 No 2.60 2.60 1.10 1593JBK 1593JGY 1593JTBU 0 No 2.60 2.60 1.10 1593ARBK 1593ARGY 1593ARTBU 2 No 2.95 2.91 1.06 1593SBK 1593SGY 1593STBU 1 Yes 3.60 2.60 0.83 1593PBK 1593PGY 1593PTBU 1 Yes 3.60 2.60 1.10 1593LBK 1593LGY 1593LTBU 2 No 3.60 2.60 1.10 1593BBBK 1593BBGY 1593BBTBU 2 No 3.75 3.00 1.18 1593NBK 1593NGY 1593NTBU 2 No 4.30 2.90 1.00 1593WBK 1593WGY 1593WTBU 2 No 4.33 4.13 1.38 1593TBK 1593TGY 1593TTBU 1 Yes 4.40 2.60 0.83 1593QBK 1593QGY 1593QTBU 1 Yes 4.40 2.60 1.10 1593DBK 1593DGY 1593DTBU 2 No 4.50 1.40 1.00 1593YBK 1593YGY 1593YTBU 1 Yes 5.50 2.60 1.10 1593XBK 1593XGY 1593XTBU 2 No 5.50 2.60 1.10 Replacement Screws & Accessories
Enclosure Part Number Silver Assembly Black Assembly PC Board Mouting Screws IR Panels Aluminum Panels PC Board Beginning With Screws (100-pack) Screws (100-pack) (50-pack) (10-pack) (10-pack) (enclosure sold separately) 1593K 1593QS100 SKU: 1593VBK -
Discontinued Products
“T” Display Enclosures 1592 Series – (1592ETSDGY) (DISCONTINUED)
Key Features:
- Perfect for instrument or mobile data enclosures requiring a keypad and display.
- Available with either a solid display area or an opening with a clear lens
- Solid display area is 122 mm x 85 mm (4.8” x 3.4”) and will accommodate display boards up to 118 mm x 60 mm (4.6” x 2.37”).
- Clear polycarbonate lens 102 mm x 45 mm (4.0” x 1.77”) and a plain mylar mask kit allows for installation of a wide variety of display boards with the protection of the clear lens and dressed by the mylar frame.
- The lens fits snugly into the case and provides protection from dirt and dust.
- Molded from flame retardant ABS plastic, choice of black or grey (material carries a UL flammability rating of 94V-0).
- The back of the case has been designed to accept a magnetic strip or “hook & loop” fabric mounting tab (see accessories below).
- The display area has been insert tooled in order to provide the capability of custom molding a low-cost display area to specific requirements.
1592 Series Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part Number Color Display Cutout Display Width Keyboard Width Length Enclosure Depth (Includes Lid) 1592ETCDBK Black Yes 5.10 3.73 9.21 1.35 1592ETCDGY Grey Yes 5.10 3.73 9.21 1.35 1592ETSDBK Black No 5.10 3.73 9.21 1.35 1592ETSDGY Grey No 5.10 3.73 9.21 1.35 SKU: 1592ETSDGY -
Discontinued Products
“T” Display Enclosures 1592 Series – (1592ETSDBK) (DISCONTINUED)
Key Features:
- Perfect for instrument or mobile data enclosures requiring a keypad and display.
- Available with either a solid display area or an opening with a clear lens
- Solid display area is 122 mm x 85 mm (4.8” x 3.4”) and will accommodate display boards up to 118 mm x 60 mm (4.6” x 2.37”).
- Clear polycarbonate lens 102 mm x 45 mm (4.0” x 1.77”) and a plain mylar mask kit allows for installation of a wide variety of display boards with the protection of the clear lens and dressed by the mylar frame.
- The lens fits snugly into the case and provides protection from dirt and dust.
- Molded from flame retardant ABS plastic, choice of black or grey (material carries a UL flammability rating of 94V-0).
- The back of the case has been designed to accept a magnetic strip or “hook & loop” fabric mounting tab (see accessories below).
- The display area has been insert tooled in order to provide the capability of custom molding a low-cost display area to specific requirements.
1592 Series Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part Number Color Display Cutout Display Width Keyboard Width Length Enclosure Depth (Includes Lid) 1592ETCDBK Black Yes 5.10 3.73 9.21 1.35 1592ETCDGY Grey Yes 5.10 3.73 9.21 1.35 1592ETSDBK Black No 5.10 3.73 9.21 1.35 1592ETSDGY Grey No 5.10 3.73 9.21 1.35 SKU: 1592ETSDBK -
Discontinued Products
“T” Display Enclosures 1592 Series – (1592ETCDGY) (DISCONTINUED)
Key Features:
- Perfect for instrument or mobile data enclosures requiring a keypad and display.
- Available with either a solid display area or an opening with a clear lens
- Solid display area is 122 mm x 85 mm (4.8” x 3.4”) and will accommodate display boards up to 118 mm x 60 mm (4.6” x 2.37”).
- Clear polycarbonate lens 102 mm x 45 mm (4.0” x 1.77”) and a plain mylar mask kit allows for installation of a wide variety of display boards with the protection of the clear lens and dressed by the mylar frame.
- The lens fits snugly into the case and provides protection from dirt and dust.
- Molded from flame retardant ABS plastic, choice of black or grey (material carries a UL flammability rating of 94V-0).
- The back of the case has been designed to accept a magnetic strip or “hook & loop” fabric mounting tab (see accessories below).
- The display area has been insert tooled in order to provide the capability of custom molding a low-cost display area to specific requirements.
1592 Series Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part Number Color Display Cutout Display Width Keyboard Width Length Enclosure Depth (Includes Lid) 1592ETCDBK Black Yes 5.10 3.73 9.21 1.35 1592ETCDGY Grey Yes 5.10 3.73 9.21 1.35 1592ETSDBK Black No 5.10 3.73 9.21 1.35 1592ETSDGY Grey No 5.10 3.73 9.21 1.35 SKU: 1592ETCDGY -
Discontinued Products
“T” Display Enclosures 1592 Series – (1592ETCDBK) (DISCONTINUED)
Key Features:
- Perfect for instrument or mobile data enclosures requiring a keypad and display.
- Available with either a solid display area or an opening with a clear lens
- Solid display area is 122 mm x 85 mm (4.8” x 3.4”) and will accommodate display boards up to 118 mm x 60 mm (4.6” x 2.37”).
- Clear polycarbonate lens 102 mm x 45 mm (4.0” x 1.77”) and a plain mylar mask kit allows for installation of a wide variety of display boards with the protection of the clear lens and dressed by the mylar frame.
- The lens fits snugly into the case and provides protection from dirt and dust.
- Molded from flame retardant ABS plastic, choice of black or grey (material carries a UL flammability rating of 94V-0).
- The back of the case has been designed to accept a magnetic strip or “hook & loop” fabric mounting tab (see accessories below).
- The display area has been insert tooled in order to provide the capability of custom molding a low-cost display area to specific requirements.
1592 Series Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part Number Color Display Cutout Display Width Keyboard Width Length Enclosure Depth (Includes Lid) 1592ETCDBK Black Yes 5.10 3.73 9.21 1.35 1592ETCDGY Grey Yes 5.10 3.73 9.21 1.35 1592ETSDBK Black No 5.10 3.73 9.21 1.35 1592ETSDGY Grey No 5.10 3.73 9.21 1.35 SKU: 1592ETCDBK -
Discontinued Products
ABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs 1591XX Series – (1591XXFSFLBK) (DISCONTINUED)
Discontinued ProductsABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs 1591XX Series – (1591XXFSFLBK) (DISCONTINUED)
Key Features:
- Ideally suited for mounting printed circuit boards horizontally.
- Internal sides of enclosure are smooth for easy connector installation except for the largest enclosure. 1591XXF. 1591XXF size is a universal type which includes P.C.board standoffs in the lid and enclosure PLUS includes card guides.
- Strong tongue and groove lid to box construction provides protection against access of dust and splashing water.
- Designed to meet IP54.
- Lid and box both contain – molded in PC board standoffs.
- Standard black and gray versions molded from easy to machine, flame retardant ABS plastic (material carries a UL flammability rating of 94V-0).
- Transparent blue and all economy versions are molded from general purpose (not flame-retardant) plastic.
- Stocked in satin texture black and grey.
- On standard versions, the lid is secured with M3 x 10 mm Phillips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required.
- Economy versions are assembled with self tapping screws into fully plastic posts.
- Black and transparent blue enclosures include black screws, gray enclosures include nickel plated screws.
- Replacement screws available in packs of 100: 1591MS100 (nickel plated) or 1591MS100BK (black)
Photo Features:
Available in black, gray, or transparent blue. PC board mounting bosses located inside the box and lid and are sized for #4 x 1/4″ self-tapping screws (not included with enclosure).
Also available with mounting flanges integrated into the lid (black and gray only)
Accessory flanges are also available (sold separately from enclosures).
Videos
Accessories
SKU: 1591XXFSFLBK -
Discontinued Products
ABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs 1591XX Series – (1591XXFFLGY) (DISCONTINUED)
Discontinued ProductsABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs 1591XX Series – (1591XXFFLGY) (DISCONTINUED)
Key Features:
- Ideally suited for mounting printed circuit boards horizontally.
- Internal sides of enclosure are smooth for easy connector installation except for the largest enclosure. 1591XXF. 1591XXF size is a universal type which includes P.C.board standoffs in the lid and enclosure PLUS includes card guides.
- Strong tongue and groove lid to box construction provides protection against access of dust and splashing water.
- Designed to meet IP54.
- Lid and box both contain – molded in PC board standoffs.
- Standard black and gray versions molded from easy to machine, flame retardant ABS plastic (material carries a UL flammability rating of 94V-0).
- Transparent blue and all economy versions are molded from general purpose (not flame-retardant) plastic.
- Stocked in satin texture black and grey.
- On standard versions, the lid is secured with M3 x 10 mm Phillips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required.
- Economy versions are assembled with self tapping screws into fully plastic posts.
- Black and transparent blue enclosures include black screws, gray enclosures include nickel plated screws.
- Replacement screws available in packs of 100: 1591MS100 (nickel plated) or 1591MS100BK (black)
Photo Features:
Available in black, gray, or transparent blue. PC board mounting bosses located inside the box and lid and are sized for #4 x 1/4″ self-tapping screws (not included with enclosure).
Also available with mounting flanges integrated into the lid (black and gray only)
Accessory flanges are also available (sold separately from enclosures).
Videos
Accessories
SKU: 1591XXFFLGY -
Discontinued Products
ABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs 1591XX Series – (1591XXESFLBK) (DISCONTINUED)
Discontinued ProductsABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs 1591XX Series – (1591XXESFLBK) (DISCONTINUED)
Key Features:
- Ideally suited for mounting printed circuit boards horizontally.
- Internal sides of enclosure are smooth for easy connector installation except for the largest enclosure. 1591XXF. 1591XXF size is a universal type which includes P.C.board standoffs in the lid and enclosure PLUS includes card guides.
- Strong tongue and groove lid to box construction provides protection against access of dust and splashing water.
- Designed to meet IP54.
- Lid and box both contain – molded in PC board standoffs.
- Standard black and gray versions molded from easy to machine, flame retardant ABS plastic (material carries a UL flammability rating of 94V-0).
- Transparent blue and all economy versions are molded from general purpose (not flame-retardant) plastic.
- Stocked in satin texture black and grey.
- On standard versions, the lid is secured with M3 x 10 mm Phillips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required.
- Economy versions are assembled with self tapping screws into fully plastic posts.
- Black and transparent blue enclosures include black screws, gray enclosures include nickel plated screws.
- Replacement screws available in packs of 100: 1591MS100 (nickel plated) or 1591MS100BK (black)
Photo Features:
Available in black, gray, or transparent blue. PC board mounting bosses located inside the box and lid and are sized for #4 x 1/4″ self-tapping screws (not included with enclosure).
Also available with mounting flanges integrated into the lid (black and gray only)
Accessory flanges are also available (sold separately from enclosures).
Videos
Accessories
SKU: 1591XXESFLBK -
Discontinued Products
ABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs 1591XX Series – (1591XXEFLGY) (DISCONTINUED)
Discontinued ProductsABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs 1591XX Series – (1591XXEFLGY) (DISCONTINUED)
Key Features:
- Ideally suited for mounting printed circuit boards horizontally.
- Internal sides of enclosure are smooth for easy connector installation except for the largest enclosure. 1591XXF. 1591XXF size is a universal type which includes P.C.board standoffs in the lid and enclosure PLUS includes card guides.
- Strong tongue and groove lid to box construction provides protection against access of dust and splashing water.
- Designed to meet IP54.
- Lid and box both contain – molded in PC board standoffs.
- Standard black and gray versions molded from easy to machine, flame retardant ABS plastic (material carries a UL flammability rating of 94V-0).
- Transparent blue and all economy versions are molded from general purpose (not flame-retardant) plastic.
- Stocked in satin texture black and grey.
- On standard versions, the lid is secured with M3 x 10 mm Phillips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required.
- Economy versions are assembled with self tapping screws into fully plastic posts.
- Black and transparent blue enclosures include black screws, gray enclosures include nickel plated screws.
- Replacement screws available in packs of 100: 1591MS100 (nickel plated) or 1591MS100BK (black)
Photo Features:
Available in black, gray, or transparent blue. PC board mounting bosses located inside the box and lid and are sized for #4 x 1/4″ self-tapping screws (not included with enclosure).
Also available with mounting flanges integrated into the lid (black and gray only)
Accessory flanges are also available (sold separately from enclosures).
Videos
Accessories
SKU: 1591XXEFLGY -
Discontinued Products
ABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs 1591XX Series – (1591XXDSFLBK) (DISCONTINUED)
Discontinued ProductsABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs 1591XX Series – (1591XXDSFLBK) (DISCONTINUED)
Key Features:
- Ideally suited for mounting printed circuit boards horizontally.
- Internal sides of enclosure are smooth for easy connector installation except for the largest enclosure. 1591XXF. 1591XXF size is a universal type which includes P.C.board standoffs in the lid and enclosure PLUS includes card guides.
- Strong tongue and groove lid to box construction provides protection against access of dust and splashing water.
- Designed to meet IP54.
- Lid and box both contain – molded in PC board standoffs.
- Standard black and gray versions molded from easy to machine, flame retardant ABS plastic (material carries a UL flammability rating of 94V-0).
- Transparent blue and all economy versions are molded from general purpose (not flame-retardant) plastic.
- Stocked in satin texture black and grey.
- On standard versions, the lid is secured with M3 x 10 mm Phillips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required.
- Economy versions are assembled with self tapping screws into fully plastic posts.
- Black and transparent blue enclosures include black screws, gray enclosures include nickel plated screws.
- Replacement screws available in packs of 100: 1591MS100 (nickel plated) or 1591MS100BK (black)
Photo Features:
Available in black, gray, or transparent blue. PC board mounting bosses located inside the box and lid and are sized for #4 x 1/4″ self-tapping screws (not included with enclosure).
Also available with mounting flanges integrated into the lid (black and gray only)
Accessory flanges are also available (sold separately from enclosures).
Videos
Accessories
SKU: 1591XXDSFLBK -
Discontinued Products
ABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs 1591XX Series – (1591XXDFLGY) (DISCONTINUED)
Discontinued ProductsABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs 1591XX Series – (1591XXDFLGY) (DISCONTINUED)
Key Features:
- Ideally suited for mounting printed circuit boards horizontally.
- Internal sides of enclosure are smooth for easy connector installation except for the largest enclosure. 1591XXF. 1591XXF size is a universal type which includes P.C.board standoffs in the lid and enclosure PLUS includes card guides.
- Strong tongue and groove lid to box construction provides protection against access of dust and splashing water.
- Designed to meet IP54.
- Lid and box both contain – molded in PC board standoffs.
- Standard black and gray versions molded from easy to machine, flame retardant ABS plastic (material carries a UL flammability rating of 94V-0).
- Transparent blue and all economy versions are molded from general purpose (not flame-retardant) plastic.
- Stocked in satin texture black and grey.
- On standard versions, the lid is secured with M3 x 10 mm Phillips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required.
- Economy versions are assembled with self tapping screws into fully plastic posts.
- Black and transparent blue enclosures include black screws, gray enclosures include nickel plated screws.
- Replacement screws available in packs of 100: 1591MS100 (nickel plated) or 1591MS100BK (black)
Photo Features:
Available in black, gray, or transparent blue. PC board mounting bosses located inside the box and lid and are sized for #4 x 1/4″ self-tapping screws (not included with enclosure).
Also available with mounting flanges integrated into the lid (black and gray only)
Accessory flanges are also available (sold separately from enclosures).
Videos
Accessories
SKU: 1591XXDFLGY -
Discontinued Products
ABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs 1591XX Series – (1591XXUSFLBK) (DISCONTINUED)
Discontinued ProductsABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs 1591XX Series – (1591XXUSFLBK) (DISCONTINUED)
Key Features:
- Ideally suited for mounting printed circuit boards horizontally.
- Internal sides of enclosure are smooth for easy connector installation except for the largest enclosure. 1591XXF. 1591XXF size is a universal type which includes P.C.board standoffs in the lid and enclosure PLUS includes card guides.
- Strong tongue and groove lid to box construction provides protection against access of dust and splashing water.
- Designed to meet IP54.
- Lid and box both contain – molded in PC board standoffs.
- Standard black and gray versions molded from easy to machine, flame retardant ABS plastic (material carries a UL flammability rating of 94V-0).
- Transparent blue and all economy versions are molded from general purpose (not flame-retardant) plastic.
- Stocked in satin texture black and grey.
- On standard versions, the lid is secured with M3 x 10 mm Phillips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required.
- Economy versions are assembled with self tapping screws into fully plastic posts.
- Black and transparent blue enclosures include black screws, gray enclosures include nickel plated screws.
- Replacement screws available in packs of 100: 1591MS100 (nickel plated) or 1591MS100BK (black)
Photo Features:
Available in black, gray, or transparent blue. PC board mounting bosses located inside the box and lid and are sized for #4 x 1/4″ self-tapping screws (not included with enclosure).
Also available with mounting flanges integrated into the lid (black and gray only)
Accessory flanges are also available (sold separately from enclosures).
Videos
Accessories
SKU: 1591XXUSFLBK -
Discontinued Products
ABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs 1591XX Series – (1591XXUFLGY) (DISCONTINUED)
Discontinued ProductsABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs 1591XX Series – (1591XXUFLGY) (DISCONTINUED)
Key Features:
- Ideally suited for mounting printed circuit boards horizontally.
- Internal sides of enclosure are smooth for easy connector installation except for the largest enclosure. 1591XXF. 1591XXF size is a universal type which includes P.C.board standoffs in the lid and enclosure PLUS includes card guides.
- Strong tongue and groove lid to box construction provides protection against access of dust and splashing water.
- Designed to meet IP54.
- Lid and box both contain – molded in PC board standoffs.
- Standard black and gray versions molded from easy to machine, flame retardant ABS plastic (material carries a UL flammability rating of 94V-0).
- Transparent blue and all economy versions are molded from general purpose (not flame-retardant) plastic.
- Stocked in satin texture black and grey.
- On standard versions, the lid is secured with M3 x 10 mm Phillips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required.
- Economy versions are assembled with self tapping screws into fully plastic posts.
- Black and transparent blue enclosures include black screws, gray enclosures include nickel plated screws.
- Replacement screws available in packs of 100: 1591MS100 (nickel plated) or 1591MS100BK (black)
Photo Features:
Available in black, gray, or transparent blue. PC board mounting bosses located inside the box and lid and are sized for #4 x 1/4″ self-tapping screws (not included with enclosure).
Also available with mounting flanges integrated into the lid (black and gray only)
Accessory flanges are also available (sold separately from enclosures).
Videos
Accessories
SKU: 1591XXUFLGY -
Discontinued Products
ABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs 1591XX Series – (1591XXGSFLBK) (DISCONTINUED)
Discontinued ProductsABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs 1591XX Series – (1591XXGSFLBK) (DISCONTINUED)
Key Features:
- Ideally suited for mounting printed circuit boards horizontally.
- Internal sides of enclosure are smooth for easy connector installation except for the largest enclosure. 1591XXF. 1591XXF size is a universal type which includes P.C.board standoffs in the lid and enclosure PLUS includes card guides.
- Strong tongue and groove lid to box construction provides protection against access of dust and splashing water.
- Designed to meet IP54.
- Lid and box both contain – molded in PC board standoffs.
- Standard black and gray versions molded from easy to machine, flame retardant ABS plastic (material carries a UL flammability rating of 94V-0).
- Transparent blue and all economy versions are molded from general purpose (not flame-retardant) plastic.
- Stocked in satin texture black and grey.
- On standard versions, the lid is secured with M3 x 10 mm Phillips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required.
- Economy versions are assembled with self tapping screws into fully plastic posts.
- Black and transparent blue enclosures include black screws, gray enclosures include nickel plated screws.
- Replacement screws available in packs of 100: 1591MS100 (nickel plated) or 1591MS100BK (black)
Photo Features:
Available in black, gray, or transparent blue. PC board mounting bosses located inside the box and lid and are sized for #4 x 1/4″ self-tapping screws (not included with enclosure).
Also available with mounting flanges integrated into the lid (black and gray only)
Accessory flanges are also available (sold separately from enclosures).
Videos
Accessories
SKU: 1591XXGSFLBK -
Discontinued Products
ABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs 1591XX Series – (1591XXGFLGY) (DISCONTINUED)
Discontinued ProductsABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs 1591XX Series – (1591XXGFLGY) (DISCONTINUED)
Key Features:
- Ideally suited for mounting printed circuit boards horizontally.
- Internal sides of enclosure are smooth for easy connector installation except for the largest enclosure. 1591XXF. 1591XXF size is a universal type which includes P.C.board standoffs in the lid and enclosure PLUS includes card guides.
- Strong tongue and groove lid to box construction provides protection against access of dust and splashing water.
- Designed to meet IP54.
- Lid and box both contain – molded in PC board standoffs.
- Standard black and gray versions molded from easy to machine, flame retardant ABS plastic (material carries a UL flammability rating of 94V-0).
- Transparent blue and all economy versions are molded from general purpose (not flame-retardant) plastic.
- Stocked in satin texture black and grey.
- On standard versions, the lid is secured with M3 x 10 mm Phillips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required.
- Economy versions are assembled with self tapping screws into fully plastic posts.
- Black and transparent blue enclosures include black screws, gray enclosures include nickel plated screws.
- Replacement screws available in packs of 100: 1591MS100 (nickel plated) or 1591MS100BK (black)
Photo Features:
Available in black, gray, or transparent blue. PC board mounting bosses located inside the box and lid and are sized for #4 x 1/4″ self-tapping screws (not included with enclosure).
Also available with mounting flanges integrated into the lid (black and gray only)
Accessory flanges are also available (sold separately from enclosures).
Videos
Accessories
SKU: 1591XXGFLGY -
Discontinued Products
ABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs 1591XX Series – (1591XXTSFLBK) (DISCONTINUED)
Discontinued ProductsABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs 1591XX Series – (1591XXTSFLBK) (DISCONTINUED)
Key Features:
- Ideally suited for mounting printed circuit boards horizontally.
- Internal sides of enclosure are smooth for easy connector installation except for the largest enclosure. 1591XXF. 1591XXF size is a universal type which includes P.C.board standoffs in the lid and enclosure PLUS includes card guides.
- Strong tongue and groove lid to box construction provides protection against access of dust and splashing water.
- Designed to meet IP54.
- Lid and box both contain – molded in PC board standoffs.
- Standard black and gray versions molded from easy to machine, flame retardant ABS plastic (material carries a UL flammability rating of 94V-0).
- Transparent blue and all economy versions are molded from general purpose (not flame-retardant) plastic.
- Stocked in satin texture black and grey.
- On standard versions, the lid is secured with M3 x 10 mm Phillips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required.
- Economy versions are assembled with self tapping screws into fully plastic posts.
- Black and transparent blue enclosures include black screws, gray enclosures include nickel plated screws.
- Replacement screws available in packs of 100: 1591MS100 (nickel plated) or 1591MS100BK (black)
Photo Features:
Available in black, gray, or transparent blue. PC board mounting bosses located inside the box and lid and are sized for #4 x 1/4″ self-tapping screws (not included with enclosure).
Also available with mounting flanges integrated into the lid (black and gray only)
Accessory flanges are also available (sold separately from enclosures).
Videos
Accessories
SKU: 1591XXTSFLBK -
Discontinued Products
ABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs 1591XX Series – (1591XXTFLGY) (DISCONTINUED)
Discontinued ProductsABS Plastic Multi-Purpose Enclosures w/ PC Board Standoffs 1591XX Series – (1591XXTFLGY) (DISCONTINUED)
Key Features:
- Ideally suited for mounting printed circuit boards horizontally.
- Internal sides of enclosure are smooth for easy connector installation except for the largest enclosure. 1591XXF. 1591XXF size is a universal type which includes P.C.board standoffs in the lid and enclosure PLUS includes card guides.
- Strong tongue and groove lid to box construction provides protection against access of dust and splashing water.
- Designed to meet IP54.
- Lid and box both contain – molded in PC board standoffs.
- Standard black and gray versions molded from easy to machine, flame retardant ABS plastic (material carries a UL flammability rating of 94V-0).
- Transparent blue and all economy versions are molded from general purpose (not flame-retardant) plastic.
- Stocked in satin texture black and grey.
- On standard versions, the lid is secured with M3 x 10 mm Phillips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required.
- Economy versions are assembled with self tapping screws into fully plastic posts.
- Black and transparent blue enclosures include black screws, gray enclosures include nickel plated screws.
- Replacement screws available in packs of 100: 1591MS100 (nickel plated) or 1591MS100BK (black)
Photo Features:
Available in black, gray, or transparent blue. PC board mounting bosses located inside the box and lid and are sized for #4 x 1/4″ self-tapping screws (not included with enclosure).
Also available with mounting flanges integrated into the lid (black and gray only)
Accessory flanges are also available (sold separately from enclosures).
Videos
Accessories
SKU: 1591XXTFLGY