American Tech Supply Full Catalog
Showing 72769–72792 of 75476 results
-
Discontinued Products
Type 4X, 6P Polycarbonate & General Purpose ABS Enclosures 1554 Series – (1554PGY) (DISCONTINUED)
Discontinued ProductsType 4X, 6P Polycarbonate & General Purpose ABS Enclosures 1554 Series – (1554PGY) (DISCONTINUED)
Key Features:
- Ideally suited for mounting printed circuit boards or DIN rail mounted components (see photo features below for details).
- ABS Versions are molded from general purpose material which carries a flammability rating of UL94-HB. For indoor use.
- Polycarbonate versions are UV stabilized for outdoor use. Gray polycarb carries a UL94-5VA rating, while clear and smoked lids carry a UL94V-0 rating.
- Polycarbonate versions are cUL and UL 508A listed (File # E65324). ABS plastic versions are not UL listed.
- Enclosure color is a light gray (RAL 7035).
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust and water.
- Replaceable gasket is one piece made from high temperature, U.L. listed silicone. Supplied loose inside the enclosure (not pre-installed).
- Polycarb versions are designed to meet NEMA Type 4, 4X, 6, 6P, 12 & 13 ratings which meet and exceed IP ratings up to and including IP68. (Except 1554/55 V size which is 4,4X only)
- ABS Plastic versions are designed to meet IP66.
- Lid is secured with included M4 stainless steel machine screws which are threaded into corrosion resistant bushings for repetitive assembly & disassembly. All hardware is designed to avoid corrosion caused by harsh environments over time.
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options and vary with size:
- Internal DIN rail mounting tabs molded into most models, except sizes “C” and “D”.
- Threaded (M3) integral brass inserts and/or standoffs (#6 self tapping screws) for P.C. board or inner panel mounting in all but the smallest size (“B”).
- Vertical P.C. card guides (for 1.5 mm thick P.C. boards) are molded in all but the smallest size (“B”).
Photo Features:
Polycarbonate versions available with gray, clear, or smoked lid. ABS version available only in gray.
Videos
Accessories
SKU: 1554PGY -
Discontinued Products
Type 4X, 6P Polycarbonate & General Purpose ABS Enclosures 1554 Series – (1554NGY) (DISCONTINUED)
Discontinued ProductsType 4X, 6P Polycarbonate & General Purpose ABS Enclosures 1554 Series – (1554NGY) (DISCONTINUED)
Key Features:
- Ideally suited for mounting printed circuit boards or DIN rail mounted components (see photo features below for details).
- ABS Versions are molded from general purpose material which carries a flammability rating of UL94-HB. For indoor use.
- Polycarbonate versions are UV stabilized for outdoor use. Gray polycarb carries a UL94-5VA rating, while clear and smoked lids carry a UL94V-0 rating.
- Polycarbonate versions are cUL and UL 508A listed (File # E65324). ABS plastic versions are not UL listed.
- Enclosure color is a light gray (RAL 7035).
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust and water.
- Replaceable gasket is one piece made from high temperature, U.L. listed silicone. Supplied loose inside the enclosure (not pre-installed).
- Polycarb versions are designed to meet NEMA Type 4, 4X, 6, 6P, 12 & 13 ratings which meet and exceed IP ratings up to and including IP68. (Except 1554/55 V size which is 4,4X only)
- ABS Plastic versions are designed to meet IP66.
- Lid is secured with included M4 stainless steel machine screws which are threaded into corrosion resistant bushings for repetitive assembly & disassembly. All hardware is designed to avoid corrosion caused by harsh environments over time.
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options and vary with size:
- Internal DIN rail mounting tabs molded into most models, except sizes “C” and “D”.
- Threaded (M3) integral brass inserts and/or standoffs (#6 self tapping screws) for P.C. board or inner panel mounting in all but the smallest size (“B”).
- Vertical P.C. card guides (for 1.5 mm thick P.C. boards) are molded in all but the smallest size (“B”).
Photo Features:
Polycarbonate versions available with gray, clear, or smoked lid. ABS version available only in gray.
Videos
Accessories
SKU: 1554NGY -
Discontinued Products
Type 4X, 6P Polycarbonate & General Purpose ABS Enclosures 1554 Series – (1554GGY) (DISCONTINUED)
Discontinued ProductsType 4X, 6P Polycarbonate & General Purpose ABS Enclosures 1554 Series – (1554GGY) (DISCONTINUED)
Key Features:
- Ideally suited for mounting printed circuit boards or DIN rail mounted components (see photo features below for details).
- ABS Versions are molded from general purpose material which carries a flammability rating of UL94-HB. For indoor use.
- Polycarbonate versions are UV stabilized for outdoor use. Gray polycarb carries a UL94-5VA rating, while clear and smoked lids carry a UL94V-0 rating.
- Polycarbonate versions are cUL and UL 508A listed (File # E65324). ABS plastic versions are not UL listed.
- Enclosure color is a light gray (RAL 7035).
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust and water.
- Replaceable gasket is one piece made from high temperature, U.L. listed silicone. Supplied loose inside the enclosure (not pre-installed).
- Polycarb versions are designed to meet NEMA Type 4, 4X, 6, 6P, 12 & 13 ratings which meet and exceed IP ratings up to and including IP68. (Except 1554/55 V size which is 4,4X only)
- ABS Plastic versions are designed to meet IP66.
- Lid is secured with included M4 stainless steel machine screws which are threaded into corrosion resistant bushings for repetitive assembly & disassembly. All hardware is designed to avoid corrosion caused by harsh environments over time.
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options and vary with size:
- Internal DIN rail mounting tabs molded into most models, except sizes “C” and “D”.
- Threaded (M3) integral brass inserts and/or standoffs (#6 self tapping screws) for P.C. board or inner panel mounting in all but the smallest size (“B”).
- Vertical P.C. card guides (for 1.5 mm thick P.C. boards) are molded in all but the smallest size (“B”).
Photo Features:
Polycarbonate versions available with gray, clear, or smoked lid. ABS version available only in gray.
Videos
Accessories
SKU: 1554GGY -
Discontinued Products
Type 4X, 6P Polycarbonate & General Purpose ABS Enclosures 1554 Series – (1554FGY) (DISCONTINUED)
Discontinued ProductsType 4X, 6P Polycarbonate & General Purpose ABS Enclosures 1554 Series – (1554FGY) (DISCONTINUED)
Key Features:
- Ideally suited for mounting printed circuit boards or DIN rail mounted components (see photo features below for details).
- ABS Versions are molded from general purpose material which carries a flammability rating of UL94-HB. For indoor use.
- Polycarbonate versions are UV stabilized for outdoor use. Gray polycarb carries a UL94-5VA rating, while clear and smoked lids carry a UL94V-0 rating.
- Polycarbonate versions are cUL and UL 508A listed (File # E65324). ABS plastic versions are not UL listed.
- Enclosure color is a light gray (RAL 7035).
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust and water.
- Replaceable gasket is one piece made from high temperature, U.L. listed silicone. Supplied loose inside the enclosure (not pre-installed).
- Polycarb versions are designed to meet NEMA Type 4, 4X, 6, 6P, 12 & 13 ratings which meet and exceed IP ratings up to and including IP68. (Except 1554/55 V size which is 4,4X only)
- ABS Plastic versions are designed to meet IP66.
- Lid is secured with included M4 stainless steel machine screws which are threaded into corrosion resistant bushings for repetitive assembly & disassembly. All hardware is designed to avoid corrosion caused by harsh environments over time.
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options and vary with size:
- Internal DIN rail mounting tabs molded into most models, except sizes “C” and “D”.
- Threaded (M3) integral brass inserts and/or standoffs (#6 self tapping screws) for P.C. board or inner panel mounting in all but the smallest size (“B”).
- Vertical P.C. card guides (for 1.5 mm thick P.C. boards) are molded in all but the smallest size (“B”).
Photo Features:
Polycarbonate versions available with gray, clear, or smoked lid. ABS version available only in gray.
Videos
Accessories
SKU: 1554FGY -
Discontinued Products
Type 4X, 6P Polycarbonate & General Purpose ABS Enclosures 1554 Series – (1554DGY) (DISCONTINUED)
Discontinued ProductsType 4X, 6P Polycarbonate & General Purpose ABS Enclosures 1554 Series – (1554DGY) (DISCONTINUED)
Key Features:
- Ideally suited for mounting printed circuit boards or DIN rail mounted components (see photo features below for details).
- ABS Versions are molded from general purpose material which carries a flammability rating of UL94-HB. For indoor use.
- Polycarbonate versions are UV stabilized for outdoor use. Gray polycarb carries a UL94-5VA rating, while clear and smoked lids carry a UL94V-0 rating.
- Polycarbonate versions are cUL and UL 508A listed (File # E65324). ABS plastic versions are not UL listed.
- Enclosure color is a light gray (RAL 7035).
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust and water.
- Replaceable gasket is one piece made from high temperature, U.L. listed silicone. Supplied loose inside the enclosure (not pre-installed).
- Polycarb versions are designed to meet NEMA Type 4, 4X, 6, 6P, 12 & 13 ratings which meet and exceed IP ratings up to and including IP68. (Except 1554/55 V size which is 4,4X only)
- ABS Plastic versions are designed to meet IP66.
- Lid is secured with included M4 stainless steel machine screws which are threaded into corrosion resistant bushings for repetitive assembly & disassembly. All hardware is designed to avoid corrosion caused by harsh environments over time.
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options and vary with size:
- Internal DIN rail mounting tabs molded into most models, except sizes “C” and “D”.
- Threaded (M3) integral brass inserts and/or standoffs (#6 self tapping screws) for P.C. board or inner panel mounting in all but the smallest size (“B”).
- Vertical P.C. card guides (for 1.5 mm thick P.C. boards) are molded in all but the smallest size (“B”).
Photo Features:
Polycarbonate versions available with gray, clear, or smoked lid. ABS version available only in gray.
Videos
Accessories
SKU: 1554DGY -
Discontinued Products
Type 4X, 6P Polycarbonate & General Purpose ABS Enclosures 1554 Series – (1554CGY) (DISCONTINUED)
Discontinued ProductsType 4X, 6P Polycarbonate & General Purpose ABS Enclosures 1554 Series – (1554CGY) (DISCONTINUED)
Key Features:
- Ideally suited for mounting printed circuit boards or DIN rail mounted components (see photo features below for details).
- ABS Versions are molded from general purpose material which carries a flammability rating of UL94-HB. For indoor use.
- Polycarbonate versions are UV stabilized for outdoor use. Gray polycarb carries a UL94-5VA rating, while clear and smoked lids carry a UL94V-0 rating.
- Polycarbonate versions are cUL and UL 508A listed (File # E65324). ABS plastic versions are not UL listed.
- Enclosure color is a light gray (RAL 7035).
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust and water.
- Replaceable gasket is one piece made from high temperature, U.L. listed silicone. Supplied loose inside the enclosure (not pre-installed).
- Polycarb versions are designed to meet NEMA Type 4, 4X, 6, 6P, 12 & 13 ratings which meet and exceed IP ratings up to and including IP68. (Except 1554/55 V size which is 4,4X only)
- ABS Plastic versions are designed to meet IP66.
- Lid is secured with included M4 stainless steel machine screws which are threaded into corrosion resistant bushings for repetitive assembly & disassembly. All hardware is designed to avoid corrosion caused by harsh environments over time.
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options and vary with size:
- Internal DIN rail mounting tabs molded into most models, except sizes “C” and “D”.
- Threaded (M3) integral brass inserts and/or standoffs (#6 self tapping screws) for P.C. board or inner panel mounting in all but the smallest size (“B”).
- Vertical P.C. card guides (for 1.5 mm thick P.C. boards) are molded in all but the smallest size (“B”).
Photo Features:
Polycarbonate versions available with gray, clear, or smoked lid. ABS version available only in gray.
Videos
Accessories
SKU: 1554CGY -
Discontinued Products
Type 4X, 6P Polycarbonate & General Purpose ABS Enclosures 1554 Series – (1554LAGY) (DISCONTINUED)
Discontinued ProductsType 4X, 6P Polycarbonate & General Purpose ABS Enclosures 1554 Series – (1554LAGY) (DISCONTINUED)
Key Features:
- Ideally suited for mounting printed circuit boards or DIN rail mounted components (see photo features below for details).
- ABS Versions are molded from general purpose material which carries a flammability rating of UL94-HB. For indoor use.
- Polycarbonate versions are UV stabilized for outdoor use. Gray polycarb carries a UL94-5VA rating, while clear and smoked lids carry a UL94V-0 rating.
- Polycarbonate versions are cUL and UL 508A listed (File # E65324). ABS plastic versions are not UL listed.
- Enclosure color is a light gray (RAL 7035).
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust and water.
- Replaceable gasket is one piece made from high temperature, U.L. listed silicone. Supplied loose inside the enclosure (not pre-installed).
- Polycarb versions are designed to meet NEMA Type 4, 4X, 6, 6P, 12 & 13 ratings which meet and exceed IP ratings up to and including IP68. (Except 1554/55 V size which is 4,4X only)
- ABS Plastic versions are designed to meet IP66.
- Lid is secured with included M4 stainless steel machine screws which are threaded into corrosion resistant bushings for repetitive assembly & disassembly. All hardware is designed to avoid corrosion caused by harsh environments over time.
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options and vary with size:
- Internal DIN rail mounting tabs molded into most models, except sizes “C” and “D”.
- Threaded (M3) integral brass inserts and/or standoffs (#6 self tapping screws) for P.C. board or inner panel mounting in all but the smallest size (“B”).
- Vertical P.C. card guides (for 1.5 mm thick P.C. boards) are molded in all but the smallest size (“B”).
Photo Features:
Polycarbonate versions available with gray, clear, or smoked lid. ABS version available only in gray.
Videos
Accessories
SKU: 1554LAGY -
Discontinued Products
Type 4X, 6P Polycarbonate & General Purpose ABS Enclosures 1554 Series – (1554LGY) (DISCONTINUED)
Discontinued ProductsType 4X, 6P Polycarbonate & General Purpose ABS Enclosures 1554 Series – (1554LGY) (DISCONTINUED)
Key Features:
- Ideally suited for mounting printed circuit boards or DIN rail mounted components (see photo features below for details).
- ABS Versions are molded from general purpose material which carries a flammability rating of UL94-HB. For indoor use.
- Polycarbonate versions are UV stabilized for outdoor use. Gray polycarb carries a UL94-5VA rating, while clear and smoked lids carry a UL94V-0 rating.
- Polycarbonate versions are cUL and UL 508A listed (File # E65324). ABS plastic versions are not UL listed.
- Enclosure color is a light gray (RAL 7035).
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust and water.
- Replaceable gasket is one piece made from high temperature, U.L. listed silicone. Supplied loose inside the enclosure (not pre-installed).
- Polycarb versions are designed to meet NEMA Type 4, 4X, 6, 6P, 12 & 13 ratings which meet and exceed IP ratings up to and including IP68. (Except 1554/55 V size which is 4,4X only)
- ABS Plastic versions are designed to meet IP66.
- Lid is secured with included M4 stainless steel machine screws which are threaded into corrosion resistant bushings for repetitive assembly & disassembly. All hardware is designed to avoid corrosion caused by harsh environments over time.
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options and vary with size:
- Internal DIN rail mounting tabs molded into most models, except sizes “C” and “D”.
- Threaded (M3) integral brass inserts and/or standoffs (#6 self tapping screws) for P.C. board or inner panel mounting in all but the smallest size (“B”).
- Vertical P.C. card guides (for 1.5 mm thick P.C. boards) are molded in all but the smallest size (“B”).
Photo Features:
Polycarbonate versions available with gray, clear, or smoked lid. ABS version available only in gray.
Videos
Accessories
SKU: 1554LGY -
Discontinued Products
Type 4X, 6P Polycarbonate & General Purpose ABS Enclosures 1554 Series – (1554EEGY) (DISCONTINUED)
Discontinued ProductsType 4X, 6P Polycarbonate & General Purpose ABS Enclosures 1554 Series – (1554EEGY) (DISCONTINUED)
Key Features:
- Ideally suited for mounting printed circuit boards or DIN rail mounted components (see photo features below for details).
- ABS Versions are molded from general purpose material which carries a flammability rating of UL94-HB. For indoor use.
- Polycarbonate versions are UV stabilized for outdoor use. Gray polycarb carries a UL94-5VA rating, while clear and smoked lids carry a UL94V-0 rating.
- Polycarbonate versions are cUL and UL 508A listed (File # E65324). ABS plastic versions are not UL listed.
- Enclosure color is a light gray (RAL 7035).
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust and water.
- Replaceable gasket is one piece made from high temperature, U.L. listed silicone. Supplied loose inside the enclosure (not pre-installed).
- Polycarb versions are designed to meet NEMA Type 4, 4X, 6, 6P, 12 & 13 ratings which meet and exceed IP ratings up to and including IP68. (Except 1554/55 V size which is 4,4X only)
- ABS Plastic versions are designed to meet IP66.
- Lid is secured with included M4 stainless steel machine screws which are threaded into corrosion resistant bushings for repetitive assembly & disassembly. All hardware is designed to avoid corrosion caused by harsh environments over time.
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options and vary with size:
- Internal DIN rail mounting tabs molded into most models, except sizes “C” and “D”.
- Threaded (M3) integral brass inserts and/or standoffs (#6 self tapping screws) for P.C. board or inner panel mounting in all but the smallest size (“B”).
- Vertical P.C. card guides (for 1.5 mm thick P.C. boards) are molded in all but the smallest size (“B”).
Photo Features:
Polycarbonate versions available with gray, clear, or smoked lid. ABS version available only in gray.
Videos
Accessories
SKU: 1554EEGY -
Discontinued Products
Type 4X, 6P Polycarbonate & General Purpose ABS Enclosures 1554 Series – (1554EGY) (DISCONTINUED)
Discontinued ProductsType 4X, 6P Polycarbonate & General Purpose ABS Enclosures 1554 Series – (1554EGY) (DISCONTINUED)
Key Features:
- Ideally suited for mounting printed circuit boards or DIN rail mounted components (see photo features below for details).
- ABS Versions are molded from general purpose material which carries a flammability rating of UL94-HB. For indoor use.
- Polycarbonate versions are UV stabilized for outdoor use. Gray polycarb carries a UL94-5VA rating, while clear and smoked lids carry a UL94V-0 rating.
- Polycarbonate versions are cUL and UL 508A listed (File # E65324). ABS plastic versions are not UL listed.
- Enclosure color is a light gray (RAL 7035).
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust and water.
- Replaceable gasket is one piece made from high temperature, U.L. listed silicone. Supplied loose inside the enclosure (not pre-installed).
- Polycarb versions are designed to meet NEMA Type 4, 4X, 6, 6P, 12 & 13 ratings which meet and exceed IP ratings up to and including IP68. (Except 1554/55 V size which is 4,4X only)
- ABS Plastic versions are designed to meet IP66.
- Lid is secured with included M4 stainless steel machine screws which are threaded into corrosion resistant bushings for repetitive assembly & disassembly. All hardware is designed to avoid corrosion caused by harsh environments over time.
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options and vary with size:
- Internal DIN rail mounting tabs molded into most models, except sizes “C” and “D”.
- Threaded (M3) integral brass inserts and/or standoffs (#6 self tapping screws) for P.C. board or inner panel mounting in all but the smallest size (“B”).
- Vertical P.C. card guides (for 1.5 mm thick P.C. boards) are molded in all but the smallest size (“B”).
Photo Features:
Polycarbonate versions available with gray, clear, or smoked lid. ABS version available only in gray.
Videos
Accessories
SKU: 1554EGY -
Discontinued Products
Type 4X, 6P Polycarbonate & General Purpose ABS Enclosures 1554 Series – (1554BGY) (DISCONTINUED)
Discontinued ProductsType 4X, 6P Polycarbonate & General Purpose ABS Enclosures 1554 Series – (1554BGY) (DISCONTINUED)
Key Features:
- Ideally suited for mounting printed circuit boards or DIN rail mounted components (see photo features below for details).
- ABS Versions are molded from general purpose material which carries a flammability rating of UL94-HB. For indoor use.
- Polycarbonate versions are UV stabilized for outdoor use. Gray polycarb carries a UL94-5VA rating, while clear and smoked lids carry a UL94V-0 rating.
- Polycarbonate versions are cUL and UL 508A listed (File # E65324). ABS plastic versions are not UL listed.
- Enclosure color is a light gray (RAL 7035).
- Gasketed lid with two piece “tongue & groove” construction provides protection against access of oil, dust and water.
- Replaceable gasket is one piece made from high temperature, U.L. listed silicone. Supplied loose inside the enclosure (not pre-installed).
- Polycarb versions are designed to meet NEMA Type 4, 4X, 6, 6P, 12 & 13 ratings which meet and exceed IP ratings up to and including IP68. (Except 1554/55 V size which is 4,4X only)
- ABS Plastic versions are designed to meet IP66.
- Lid is secured with included M4 stainless steel machine screws which are threaded into corrosion resistant bushings for repetitive assembly & disassembly. All hardware is designed to avoid corrosion caused by harsh environments over time.
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options and vary with size:
- Internal DIN rail mounting tabs molded into most models, except sizes “C” and “D”.
- Threaded (M3) integral brass inserts and/or standoffs (#6 self tapping screws) for P.C. board or inner panel mounting in all but the smallest size (“B”).
- Vertical P.C. card guides (for 1.5 mm thick P.C. boards) are molded in all but the smallest size (“B”).
Photo Features:
Polycarbonate versions available with gray, clear, or smoked lid. ABS version available only in gray.
Videos
Accessories
SKU: 1554BGY -
Discontinued Products
Water-Tight Hand-Held Enclosures 1553W Series – (1553WDGASKET) (DISCONTINUED)
Key Features:
- Ergonomically designed for hand-held comfort.
- Designed to meet IP65.
- Uses a one piece silicone gasket (installed). Enclosure utilizes tongue & groove construction – molded into the top & bottom halves.
- Choice of three sizes – in two colors.
- Molded in flame retardant – ABS plastic (FRABS) – UV stabilized. With a grey overmold, soft plastic grip.
- Top cover is recessed for membrane display or keypad.
- P.C. board standoffs are molded into both the top & bottom of the enclosure (see drawings or photos for more details). Standoff screws (M2) not included.
- Front panel is an integral part of the top half of the enclosure.
- Choice of two enclosure colors, light grey or black – soft side “grip” plastic color is grey.
- Enclosure is secured with black Philips, stainless steel, machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required.
- Assembly hardware included – for replacement part numbers – see individual drawings.
- 100-pack of PC board screws, part number 1553WTS100
- Replacement assembly screws for sizes “B” and “D”, part number SC1553WB100BK (100-pack, black stainless steel)
- Replacement assembly screws for sizes “C”, part number SC1553WC100BK (100-pack, black stainless steel)
- For similar enclosures designed for general purpose applications, including more size and colors options, try series 1553
Photo Features
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part Numbers
Units shown: inch. Switch units to: mm
Replacement Gasket Part Number Color Battery Door & Compartment Length Width Depth (assembled) (2-pack) 1553WBBK Black No 4.62 3.11 0.98 1553WBGASKET 1553WBGY Grey No 4.62 3.11 0.98 1553WBGASKET 1553WCBK Black No 4.62 3.11 1.26 1553WCGASKET 1553WCGY Grey No 4.62 3.11 1.26 1553WCGASKET 1553WDBK Black No 5.80 3.54 0.98 1553WDGASKET 1553WDGY Grey No 5.80 3.54 0.98 1553WDGASKET SKU: 1553WDGASKET -
Discontinued Products
Water-Tight Hand-Held Enclosures 1553W Series – (1553WCGASKET) (DISCONTINUED)
Key Features:
- Ergonomically designed for hand-held comfort.
- Designed to meet IP65.
- Uses a one piece silicone gasket (installed). Enclosure utilizes tongue & groove construction – molded into the top & bottom halves.
- Choice of three sizes – in two colors.
- Molded in flame retardant – ABS plastic (FRABS) – UV stabilized. With a grey overmold, soft plastic grip.
- Top cover is recessed for membrane display or keypad.
- P.C. board standoffs are molded into both the top & bottom of the enclosure (see drawings or photos for more details). Standoff screws (M2) not included.
- Front panel is an integral part of the top half of the enclosure.
- Choice of two enclosure colors, light grey or black – soft side “grip” plastic color is grey.
- Enclosure is secured with black Philips, stainless steel, machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required.
- Assembly hardware included – for replacement part numbers – see individual drawings.
- 100-pack of PC board screws, part number 1553WTS100
- Replacement assembly screws for sizes “B” and “D”, part number SC1553WB100BK (100-pack, black stainless steel)
- Replacement assembly screws for sizes “C”, part number SC1553WC100BK (100-pack, black stainless steel)
- For similar enclosures designed for general purpose applications, including more size and colors options, try series 1553
Photo Features
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part Numbers
Units shown: inch. Switch units to: mm
Replacement Gasket Part Number Color Battery Door & Compartment Length Width Depth (assembled) (2-pack) 1553WBBK Black No 4.62 3.11 0.98 1553WBGASKET 1553WBGY Grey No 4.62 3.11 0.98 1553WBGASKET 1553WCBK Black No 4.62 3.11 1.26 1553WCGASKET 1553WCGY Grey No 4.62 3.11 1.26 1553WCGASKET 1553WDBK Black No 5.80 3.54 0.98 1553WDGASKET 1553WDGY Grey No 5.80 3.54 0.98 1553WDGASKET SKU: 1553WCGASKET -
Discontinued Products
Water-Tight Hand-Held Enclosures 1553W Series – (1553WBGASKET) (DISCONTINUED)
Key Features:
- Ergonomically designed for hand-held comfort.
- Designed to meet IP65.
- Uses a one piece silicone gasket (installed). Enclosure utilizes tongue & groove construction – molded into the top & bottom halves.
- Choice of three sizes – in two colors.
- Molded in flame retardant – ABS plastic (FRABS) – UV stabilized. With a grey overmold, soft plastic grip.
- Top cover is recessed for membrane display or keypad.
- P.C. board standoffs are molded into both the top & bottom of the enclosure (see drawings or photos for more details). Standoff screws (M2) not included.
- Front panel is an integral part of the top half of the enclosure.
- Choice of two enclosure colors, light grey or black – soft side “grip” plastic color is grey.
- Enclosure is secured with black Philips, stainless steel, machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required.
- Assembly hardware included – for replacement part numbers – see individual drawings.
- 100-pack of PC board screws, part number 1553WTS100
- Replacement assembly screws for sizes “B” and “D”, part number SC1553WB100BK (100-pack, black stainless steel)
- Replacement assembly screws for sizes “C”, part number SC1553WC100BK (100-pack, black stainless steel)
- For similar enclosures designed for general purpose applications, including more size and colors options, try series 1553
Photo Features
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part Numbers
Units shown: inch. Switch units to: mm
Replacement Gasket Part Number Color Battery Door & Compartment Length Width Depth (assembled) (2-pack) 1553WBBK Black No 4.62 3.11 0.98 1553WBGASKET 1553WBGY Grey No 4.62 3.11 0.98 1553WBGASKET 1553WCBK Black No 4.62 3.11 1.26 1553WCGASKET 1553WCGY Grey No 4.62 3.11 1.26 1553WCGASKET 1553WDBK Black No 5.80 3.54 0.98 1553WDGASKET 1553WDGY Grey No 5.80 3.54 0.98 1553WDGASKET SKU: 1553WBGASKET -
Discontinued Products
Water-Tight Hand-Held Enclosures 1553W Series – (1553WDGY) (DISCONTINUED)
Key Features:
- Ergonomically designed for hand-held comfort.
- Designed to meet IP65.
- Uses a one piece silicone gasket (installed). Enclosure utilizes tongue & groove construction – molded into the top & bottom halves.
- Choice of three sizes – in two colors.
- Molded in flame retardant – ABS plastic (FRABS) – UV stabilized. With a grey overmold, soft plastic grip.
- Top cover is recessed for membrane display or keypad.
- P.C. board standoffs are molded into both the top & bottom of the enclosure (see drawings or photos for more details). Standoff screws (M2) not included.
- Front panel is an integral part of the top half of the enclosure.
- Choice of two enclosure colors, light grey or black – soft side “grip” plastic color is grey.
- Enclosure is secured with black Philips, stainless steel, machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required.
- Assembly hardware included – for replacement part numbers – see individual drawings.
- 100-pack of PC board screws, part number 1553WTS100
- Replacement assembly screws for sizes “B” and “D”, part number SC1553WB100BK (100-pack, black stainless steel)
- Replacement assembly screws for sizes “C”, part number SC1553WC100BK (100-pack, black stainless steel)
- For similar enclosures designed for general purpose applications, including more size and colors options, try series 1553
Photo Features
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part Numbers
Units shown: inch. Switch units to: mm
Replacement Gasket Part Number Color Battery Door & Compartment Length Width Depth (assembled) (2-pack) 1553WBBK Black No 4.62 3.11 0.98 1553WBGASKET 1553WBGY Grey No 4.62 3.11 0.98 1553WBGASKET 1553WCBK Black No 4.62 3.11 1.26 1553WCGASKET 1553WCGY Grey No 4.62 3.11 1.26 1553WCGASKET 1553WDBK Black No 5.80 3.54 0.98 1553WDGASKET 1553WDGY Grey No 5.80 3.54 0.98 1553WDGASKET SKU: 1553WDGY -
Discontinued Products
Water-Tight Hand-Held Enclosures 1553W Series – (1553WDBK) (DISCONTINUED)
Key Features:
- Ergonomically designed for hand-held comfort.
- Designed to meet IP65.
- Uses a one piece silicone gasket (installed). Enclosure utilizes tongue & groove construction – molded into the top & bottom halves.
- Choice of three sizes – in two colors.
- Molded in flame retardant – ABS plastic (FRABS) – UV stabilized. With a grey overmold, soft plastic grip.
- Top cover is recessed for membrane display or keypad.
- P.C. board standoffs are molded into both the top & bottom of the enclosure (see drawings or photos for more details). Standoff screws (M2) not included.
- Front panel is an integral part of the top half of the enclosure.
- Choice of two enclosure colors, light grey or black – soft side “grip” plastic color is grey.
- Enclosure is secured with black Philips, stainless steel, machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required.
- Assembly hardware included – for replacement part numbers – see individual drawings.
- 100-pack of PC board screws, part number 1553WTS100
- Replacement assembly screws for sizes “B” and “D”, part number SC1553WB100BK (100-pack, black stainless steel)
- Replacement assembly screws for sizes “C”, part number SC1553WC100BK (100-pack, black stainless steel)
- For similar enclosures designed for general purpose applications, including more size and colors options, try series 1553
Photo Features
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part Numbers
Units shown: inch. Switch units to: mm
Replacement Gasket Part Number Color Battery Door & Compartment Length Width Depth (assembled) (2-pack) 1553WBBK Black No 4.62 3.11 0.98 1553WBGASKET 1553WBGY Grey No 4.62 3.11 0.98 1553WBGASKET 1553WCBK Black No 4.62 3.11 1.26 1553WCGASKET 1553WCGY Grey No 4.62 3.11 1.26 1553WCGASKET 1553WDBK Black No 5.80 3.54 0.98 1553WDGASKET 1553WDGY Grey No 5.80 3.54 0.98 1553WDGASKET SKU: 1553WDBK -
Discontinued Products
Water-Tight Hand-Held Enclosures 1553W Series – (1553WCGY) (DISCONTINUED)
Key Features:
- Ergonomically designed for hand-held comfort.
- Designed to meet IP65.
- Uses a one piece silicone gasket (installed). Enclosure utilizes tongue & groove construction – molded into the top & bottom halves.
- Choice of three sizes – in two colors.
- Molded in flame retardant – ABS plastic (FRABS) – UV stabilized. With a grey overmold, soft plastic grip.
- Top cover is recessed for membrane display or keypad.
- P.C. board standoffs are molded into both the top & bottom of the enclosure (see drawings or photos for more details). Standoff screws (M2) not included.
- Front panel is an integral part of the top half of the enclosure.
- Choice of two enclosure colors, light grey or black – soft side “grip” plastic color is grey.
- Enclosure is secured with black Philips, stainless steel, machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required.
- Assembly hardware included – for replacement part numbers – see individual drawings.
- 100-pack of PC board screws, part number 1553WTS100
- Replacement assembly screws for sizes “B” and “D”, part number SC1553WB100BK (100-pack, black stainless steel)
- Replacement assembly screws for sizes “C”, part number SC1553WC100BK (100-pack, black stainless steel)
- For similar enclosures designed for general purpose applications, including more size and colors options, try series 1553
Photo Features
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part Numbers
Units shown: inch. Switch units to: mm
Replacement Gasket Part Number Color Battery Door & Compartment Length Width Depth (assembled) (2-pack) 1553WBBK Black No 4.62 3.11 0.98 1553WBGASKET 1553WBGY Grey No 4.62 3.11 0.98 1553WBGASKET 1553WCBK Black No 4.62 3.11 1.26 1553WCGASKET 1553WCGY Grey No 4.62 3.11 1.26 1553WCGASKET 1553WDBK Black No 5.80 3.54 0.98 1553WDGASKET 1553WDGY Grey No 5.80 3.54 0.98 1553WDGASKET SKU: 1553WCGY -
Discontinued Products
Water-Tight Hand-Held Enclosures 1553W Series – (1553WCBK) (DISCONTINUED)
Key Features:
- Ergonomically designed for hand-held comfort.
- Designed to meet IP65.
- Uses a one piece silicone gasket (installed). Enclosure utilizes tongue & groove construction – molded into the top & bottom halves.
- Choice of three sizes – in two colors.
- Molded in flame retardant – ABS plastic (FRABS) – UV stabilized. With a grey overmold, soft plastic grip.
- Top cover is recessed for membrane display or keypad.
- P.C. board standoffs are molded into both the top & bottom of the enclosure (see drawings or photos for more details). Standoff screws (M2) not included.
- Front panel is an integral part of the top half of the enclosure.
- Choice of two enclosure colors, light grey or black – soft side “grip” plastic color is grey.
- Enclosure is secured with black Philips, stainless steel, machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required.
- Assembly hardware included – for replacement part numbers – see individual drawings.
- 100-pack of PC board screws, part number 1553WTS100
- Replacement assembly screws for sizes “B” and “D”, part number SC1553WB100BK (100-pack, black stainless steel)
- Replacement assembly screws for sizes “C”, part number SC1553WC100BK (100-pack, black stainless steel)
- For similar enclosures designed for general purpose applications, including more size and colors options, try series 1553
Photo Features
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part Numbers
Units shown: inch. Switch units to: mm
Replacement Gasket Part Number Color Battery Door & Compartment Length Width Depth (assembled) (2-pack) 1553WBBK Black No 4.62 3.11 0.98 1553WBGASKET 1553WBGY Grey No 4.62 3.11 0.98 1553WBGASKET 1553WCBK Black No 4.62 3.11 1.26 1553WCGASKET 1553WCGY Grey No 4.62 3.11 1.26 1553WCGASKET 1553WDBK Black No 5.80 3.54 0.98 1553WDGASKET 1553WDGY Grey No 5.80 3.54 0.98 1553WDGASKET SKU: 1553WCBK -
Discontinued Products
Water-Tight Hand-Held Enclosures 1553W Series – (1553WBGY) (DISCONTINUED)
Key Features:
- Ergonomically designed for hand-held comfort.
- Designed to meet IP65.
- Uses a one piece silicone gasket (installed). Enclosure utilizes tongue & groove construction – molded into the top & bottom halves.
- Choice of three sizes – in two colors.
- Molded in flame retardant – ABS plastic (FRABS) – UV stabilized. With a grey overmold, soft plastic grip.
- Top cover is recessed for membrane display or keypad.
- P.C. board standoffs are molded into both the top & bottom of the enclosure (see drawings or photos for more details). Standoff screws (M2) not included.
- Front panel is an integral part of the top half of the enclosure.
- Choice of two enclosure colors, light grey or black – soft side “grip” plastic color is grey.
- Enclosure is secured with black Philips, stainless steel, machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required.
- Assembly hardware included – for replacement part numbers – see individual drawings.
- 100-pack of PC board screws, part number 1553WTS100
- Replacement assembly screws for sizes “B” and “D”, part number SC1553WB100BK (100-pack, black stainless steel)
- Replacement assembly screws for sizes “C”, part number SC1553WC100BK (100-pack, black stainless steel)
- For similar enclosures designed for general purpose applications, including more size and colors options, try series 1553
Photo Features
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part Numbers
Units shown: inch. Switch units to: mm
Replacement Gasket Part Number Color Battery Door & Compartment Length Width Depth (assembled) (2-pack) 1553WBBK Black No 4.62 3.11 0.98 1553WBGASKET 1553WBGY Grey No 4.62 3.11 0.98 1553WBGASKET 1553WCBK Black No 4.62 3.11 1.26 1553WCGASKET 1553WCGY Grey No 4.62 3.11 1.26 1553WCGASKET 1553WDBK Black No 5.80 3.54 0.98 1553WDGASKET 1553WDGY Grey No 5.80 3.54 0.98 1553WDGASKET SKU: 1553WBGY -
Discontinued Products
Water-Tight Hand-Held Enclosures 1553W Series – (1553WBBK) (DISCONTINUED)
Key Features:
- Ergonomically designed for hand-held comfort.
- Designed to meet IP65.
- Uses a one piece silicone gasket (installed). Enclosure utilizes tongue & groove construction – molded into the top & bottom halves.
- Choice of three sizes – in two colors.
- Molded in flame retardant – ABS plastic (FRABS) – UV stabilized. With a grey overmold, soft plastic grip.
- Top cover is recessed for membrane display or keypad.
- P.C. board standoffs are molded into both the top & bottom of the enclosure (see drawings or photos for more details). Standoff screws (M2) not included.
- Front panel is an integral part of the top half of the enclosure.
- Choice of two enclosure colors, light grey or black – soft side “grip” plastic color is grey.
- Enclosure is secured with black Philips, stainless steel, machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required.
- Assembly hardware included – for replacement part numbers – see individual drawings.
- 100-pack of PC board screws, part number 1553WTS100
- Replacement assembly screws for sizes “B” and “D”, part number SC1553WB100BK (100-pack, black stainless steel)
- Replacement assembly screws for sizes “C”, part number SC1553WC100BK (100-pack, black stainless steel)
- For similar enclosures designed for general purpose applications, including more size and colors options, try series 1553
Photo Features
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part Numbers
Units shown: inch. Switch units to: mm
Replacement Gasket Part Number Color Battery Door & Compartment Length Width Depth (assembled) (2-pack) 1553WBBK Black No 4.62 3.11 0.98 1553WBGASKET 1553WBGY Grey No 4.62 3.11 0.98 1553WBGASKET 1553WCBK Black No 4.62 3.11 1.26 1553WCGASKET 1553WCGY Grey No 4.62 3.11 1.26 1553WCGASKET 1553WDBK Black No 5.80 3.54 0.98 1553WDGASKET 1553WDGY Grey No 5.80 3.54 0.98 1553WDGASKET SKU: 1553WBBK -
Discontinued Products
Hand-Hand “T” Soft Side Enclosures 1553T Series – (53TTBATDOORGY-5) (DISCONTINUED)
Discontinued ProductsHand-Hand “T” Soft Side Enclosures 1553T Series – (53TTBATDOORGY-5) (DISCONTINUED)
Key Features:
- Ergonomically designed for a comfortable fit into the user’s hand.
- Choice of: two sizes, in two versions (with or without battery door) – in two colors (black or grey).
- Perfect for instrument or mobile data enclosures requiring a keypad and display.
- Both the display and keyboard areas are recessed for membrane devices.
- Molded from flame retardant ABS plastic, choice of black or light gray – material carries a UL flammability rating of 94V-0.
- Handheld section of enclosure includes a dark grey overmold, soft plastic grip.
- Enclosure is assembled with M3-0.5 x 18 mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required.
- Integral brass bushings are factory inserted into top half of the enclosure (see photos).
- Lap joint construction provides protection against access of dust and splashing water. Designed to meet IP54.
- P.C. board standoffs are molded into the case top & bottom halves (see drawings or photos for more details).
- Battery door & compartment version (part numbers ending in “BAT”) includes:
- 1553TT “BAT” versions – 4 battery clips (for 2- AA batteries) and one 9 volt (PP3) battery clip.
- 1553T “BAT” versions – 8 battery clips (for 4 – AA batteries) and two 9 volt (PP3) battery clips.
- Contains either one or two end panels (depending on version – see table below) – removable for easy modification.
- Bottom half of enclosure includes molded in label recess on back:
- 1553TT “BAT” versions – 1.73″ x 1.3″ (44 mm x 33 mm).
- 1553T “BAT” versions – 2.2″ x 1.65″ (56 mm x 42 mm).
Photo Features
Replacement Screws & Accessories
Screws
Replacement assembly machine screws sold in packs of 100.
- 1594MS100 (silver)
- 1594MS100BK (black)
Self tapping PC board mounting screws sold in packs of 50 and 100
- 1593ATS50 (50-pack)
- 1593ATS100 (100-pack)
Belt Clips
- 1599CLIP (black)
- 1599CLIPGY (gray)
Extra Battery Clip Kits
- 1553HDR-BKIT (4 positive and 4 negative clips) for AA
- BS61 for 9V batteries
SKU: 53TTBATDOORGY-5 -
Discontinued Products
Hand-Hand “T” Soft Side Enclosures 1553T Series – (53TTBATDOORBK-5) (DISCONTINUED)
Discontinued ProductsHand-Hand “T” Soft Side Enclosures 1553T Series – (53TTBATDOORBK-5) (DISCONTINUED)
Key Features:
- Ergonomically designed for a comfortable fit into the user’s hand.
- Choice of: two sizes, in two versions (with or without battery door) – in two colors (black or grey).
- Perfect for instrument or mobile data enclosures requiring a keypad and display.
- Both the display and keyboard areas are recessed for membrane devices.
- Molded from flame retardant ABS plastic, choice of black or light gray – material carries a UL flammability rating of 94V-0.
- Handheld section of enclosure includes a dark grey overmold, soft plastic grip.
- Enclosure is assembled with M3-0.5 x 18 mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required.
- Integral brass bushings are factory inserted into top half of the enclosure (see photos).
- Lap joint construction provides protection against access of dust and splashing water. Designed to meet IP54.
- P.C. board standoffs are molded into the case top & bottom halves (see drawings or photos for more details).
- Battery door & compartment version (part numbers ending in “BAT”) includes:
- 1553TT “BAT” versions – 4 battery clips (for 2- AA batteries) and one 9 volt (PP3) battery clip.
- 1553T “BAT” versions – 8 battery clips (for 4 – AA batteries) and two 9 volt (PP3) battery clips.
- Contains either one or two end panels (depending on version – see table below) – removable for easy modification.
- Bottom half of enclosure includes molded in label recess on back:
- 1553TT “BAT” versions – 1.73″ x 1.3″ (44 mm x 33 mm).
- 1553T “BAT” versions – 2.2″ x 1.65″ (56 mm x 42 mm).
Photo Features
Replacement Screws & Accessories
Screws
Replacement assembly machine screws sold in packs of 100.
- 1594MS100 (silver)
- 1594MS100BK (black)
Self tapping PC board mounting screws sold in packs of 50 and 100
- 1593ATS50 (50-pack)
- 1593ATS100 (100-pack)
Belt Clips
- 1599CLIP (black)
- 1599CLIPGY (gray)
Extra Battery Clip Kits
- 1553HDR-BKIT (4 positive and 4 negative clips) for AA
- BS61 for 9V batteries
SKU: 53TTBATDOORBK-5 -
Discontinued Products
Hand-Hand “T” Soft Side Enclosures 1553T Series – (1553TTPLGY-10) (DISCONTINUED)
Discontinued ProductsHand-Hand “T” Soft Side Enclosures 1553T Series – (1553TTPLGY-10) (DISCONTINUED)
Key Features:
- Ergonomically designed for a comfortable fit into the user’s hand.
- Choice of: two sizes, in two versions (with or without battery door) – in two colors (black or grey).
- Perfect for instrument or mobile data enclosures requiring a keypad and display.
- Both the display and keyboard areas are recessed for membrane devices.
- Molded from flame retardant ABS plastic, choice of black or light gray – material carries a UL flammability rating of 94V-0.
- Handheld section of enclosure includes a dark grey overmold, soft plastic grip.
- Enclosure is assembled with M3-0.5 x 18 mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required.
- Integral brass bushings are factory inserted into top half of the enclosure (see photos).
- Lap joint construction provides protection against access of dust and splashing water. Designed to meet IP54.
- P.C. board standoffs are molded into the case top & bottom halves (see drawings or photos for more details).
- Battery door & compartment version (part numbers ending in “BAT”) includes:
- 1553TT “BAT” versions – 4 battery clips (for 2- AA batteries) and one 9 volt (PP3) battery clip.
- 1553T “BAT” versions – 8 battery clips (for 4 – AA batteries) and two 9 volt (PP3) battery clips.
- Contains either one or two end panels (depending on version – see table below) – removable for easy modification.
- Bottom half of enclosure includes molded in label recess on back:
- 1553TT “BAT” versions – 1.73″ x 1.3″ (44 mm x 33 mm).
- 1553T “BAT” versions – 2.2″ x 1.65″ (56 mm x 42 mm).
Photo Features
Replacement Screws & Accessories
Screws
Replacement assembly machine screws sold in packs of 100.
- 1594MS100 (silver)
- 1594MS100BK (black)
Self tapping PC board mounting screws sold in packs of 50 and 100
- 1593ATS50 (50-pack)
- 1593ATS100 (100-pack)
Belt Clips
- 1599CLIP (black)
- 1599CLIPGY (gray)
Extra Battery Clip Kits
- 1553HDR-BKIT (4 positive and 4 negative clips) for AA
- BS61 for 9V batteries
SKU: 1553TTPLGY-10 -
Discontinued Products
Hand-Hand “T” Soft Side Enclosures 1553T Series – (53TBATDOORGY-5) (DISCONTINUED)
Discontinued ProductsHand-Hand “T” Soft Side Enclosures 1553T Series – (53TBATDOORGY-5) (DISCONTINUED)
Key Features:
- Ergonomically designed for a comfortable fit into the user’s hand.
- Choice of: two sizes, in two versions (with or without battery door) – in two colors (black or grey).
- Perfect for instrument or mobile data enclosures requiring a keypad and display.
- Both the display and keyboard areas are recessed for membrane devices.
- Molded from flame retardant ABS plastic, choice of black or light gray – material carries a UL flammability rating of 94V-0.
- Handheld section of enclosure includes a dark grey overmold, soft plastic grip.
- Enclosure is assembled with M3-0.5 x 18 mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required.
- Integral brass bushings are factory inserted into top half of the enclosure (see photos).
- Lap joint construction provides protection against access of dust and splashing water. Designed to meet IP54.
- P.C. board standoffs are molded into the case top & bottom halves (see drawings or photos for more details).
- Battery door & compartment version (part numbers ending in “BAT”) includes:
- 1553TT “BAT” versions – 4 battery clips (for 2- AA batteries) and one 9 volt (PP3) battery clip.
- 1553T “BAT” versions – 8 battery clips (for 4 – AA batteries) and two 9 volt (PP3) battery clips.
- Contains either one or two end panels (depending on version – see table below) – removable for easy modification.
- Bottom half of enclosure includes molded in label recess on back:
- 1553TT “BAT” versions – 1.73″ x 1.3″ (44 mm x 33 mm).
- 1553T “BAT” versions – 2.2″ x 1.65″ (56 mm x 42 mm).
Photo Features
Replacement Screws & Accessories
Screws
Replacement assembly machine screws sold in packs of 100.
- 1594MS100 (silver)
- 1594MS100BK (black)
Self tapping PC board mounting screws sold in packs of 50 and 100
- 1593ATS50 (50-pack)
- 1593ATS100 (100-pack)
Belt Clips
- 1599CLIP (black)
- 1599CLIPGY (gray)
Extra Battery Clip Kits
- 1553HDR-BKIT (4 positive and 4 negative clips) for AA
- BS61 for 9V batteries
SKU: 53TBATDOORGY-5