American Tech Supply Full Catalog
Showing 73393–73416 of 75476 results
-
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455TFBK) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
SKU: 1455TFBK -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455RFBK) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
SKU: 1455RFBK -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455QFBK) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
SKU: 1455QFBK -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455PFBK) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
SKU: 1455PFBK -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455NFBK) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
SKU: 1455NFBK -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455LFBK) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
SKU: 1455LFBK -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455KFBK) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
SKU: 1455KFBK -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455JFBK) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
SKU: 1455JFBK -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455DFBK) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
SKU: 1455DFBK -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455MSFL100BK) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
SKU: 1455MSFL100BK -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455CFBK) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
SKU: 1455CFBK -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455UALBK-10) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
SKU: 1455UALBK-10 -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455TALRD-10) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
SKU: 1455TALRD-10 -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455TALBU-10) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
SKU: 1455TALBU-10 -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455TALBK-10) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
SKU: 1455TALBK-10 -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455RALRD-10) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
SKU: 1455RALRD-10 -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455RALBU-10) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
SKU: 1455RALBU-10 -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455RALBK-10) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
SKU: 1455RALBK-10 -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455QALRD-10) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
SKU: 1455QALRD-10 -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455QALBU-10) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
SKU: 1455QALBU-10 -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455QALBK-10) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
SKU: 1455QALBK-10 -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455PALRD-10) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
SKU: 1455PALRD-10 -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455PALBU-10) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
SKU: 1455PALBU-10 -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455PALBK-10) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
SKU: 1455PALBK-10