American Tech Supply Full Catalog
Showing 73417–73440 of 74562 results
-
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWJO12) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
Type 1 Lay In Hinge Cover Wireway
Type 1 Lay In Screw Cover Wireway
Type 1 Lay In Screw Cover Wireway – w/o Knockouts
Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
Joiner
Straight Section Barrier
Reducer
Corner Reducer
Cross Fitting
Tee Fitting
Telecope Fitting
90 degree Elbow
45 degree Elbow
22.5 degree Elbow
Bracket Hanger Wall Type
Bracket Hanger Ceiling Type
Closing Plate
Closing Plate – w/o Knockouts
Adapter (Box Connector)
SKU: CWJO12 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWJO10) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
Type 1 Lay In Hinge Cover Wireway
Type 1 Lay In Screw Cover Wireway
Type 1 Lay In Screw Cover Wireway – w/o Knockouts
Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
Joiner
Straight Section Barrier
Reducer
Corner Reducer
Cross Fitting
Tee Fitting
Telecope Fitting
90 degree Elbow
45 degree Elbow
22.5 degree Elbow
Bracket Hanger Wall Type
Bracket Hanger Ceiling Type
Closing Plate
Closing Plate – w/o Knockouts
Adapter (Box Connector)
SKU: CWJO10 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWJO8) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
Type 1 Lay In Hinge Cover Wireway
Type 1 Lay In Screw Cover Wireway
Type 1 Lay In Screw Cover Wireway – w/o Knockouts
Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
Joiner
Straight Section Barrier
Reducer
Corner Reducer
Cross Fitting
Tee Fitting
Telecope Fitting
90 degree Elbow
45 degree Elbow
22.5 degree Elbow
Bracket Hanger Wall Type
Bracket Hanger Ceiling Type
Closing Plate
Closing Plate – w/o Knockouts
Adapter (Box Connector)
SKU: CWJO8 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWJO6) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
Type 1 Lay In Hinge Cover Wireway
Type 1 Lay In Screw Cover Wireway
Type 1 Lay In Screw Cover Wireway – w/o Knockouts
Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
Joiner
Straight Section Barrier
Reducer
Corner Reducer
Cross Fitting
Tee Fitting
Telecope Fitting
90 degree Elbow
45 degree Elbow
22.5 degree Elbow
Bracket Hanger Wall Type
Bracket Hanger Ceiling Type
Closing Plate
Closing Plate – w/o Knockouts
Adapter (Box Connector)
SKU: CWJO6 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWJO4) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
Type 1 Lay In Hinge Cover Wireway
Type 1 Lay In Screw Cover Wireway
Type 1 Lay In Screw Cover Wireway – w/o Knockouts
Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
Joiner
Straight Section Barrier
Reducer
Corner Reducer
Cross Fitting
Tee Fitting
Telecope Fitting
90 degree Elbow
45 degree Elbow
22.5 degree Elbow
Bracket Hanger Wall Type
Bracket Hanger Ceiling Type
Closing Plate
Closing Plate – w/o Knockouts
Adapter (Box Connector)
SKU: CWJO4 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWAD12) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
Type 1 Lay In Hinge Cover Wireway
Type 1 Lay In Screw Cover Wireway
Type 1 Lay In Screw Cover Wireway – w/o Knockouts
Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
Joiner
Straight Section Barrier
Reducer
Corner Reducer
Cross Fitting
Tee Fitting
Telecope Fitting
90 degree Elbow
45 degree Elbow
22.5 degree Elbow
Bracket Hanger Wall Type
Bracket Hanger Ceiling Type
Closing Plate
Closing Plate – w/o Knockouts
Adapter (Box Connector)
SKU: CWAD12 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWAD10) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
Type 1 Lay In Hinge Cover Wireway
Type 1 Lay In Screw Cover Wireway
Type 1 Lay In Screw Cover Wireway – w/o Knockouts
Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
Joiner
Straight Section Barrier
Reducer
Corner Reducer
Cross Fitting
Tee Fitting
Telecope Fitting
90 degree Elbow
45 degree Elbow
22.5 degree Elbow
Bracket Hanger Wall Type
Bracket Hanger Ceiling Type
Closing Plate
Closing Plate – w/o Knockouts
Adapter (Box Connector)
SKU: CWAD10 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWAD8) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
Type 1 Lay In Hinge Cover Wireway
Type 1 Lay In Screw Cover Wireway
Type 1 Lay In Screw Cover Wireway – w/o Knockouts
Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
Joiner
Straight Section Barrier
Reducer
Corner Reducer
Cross Fitting
Tee Fitting
Telecope Fitting
90 degree Elbow
45 degree Elbow
22.5 degree Elbow
Bracket Hanger Wall Type
Bracket Hanger Ceiling Type
Closing Plate
Closing Plate – w/o Knockouts
Adapter (Box Connector)
SKU: CWAD8 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWAD6) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
Type 1 Lay In Hinge Cover Wireway
Type 1 Lay In Screw Cover Wireway
Type 1 Lay In Screw Cover Wireway – w/o Knockouts
Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
Joiner
Straight Section Barrier
Reducer
Corner Reducer
Cross Fitting
Tee Fitting
Telecope Fitting
90 degree Elbow
45 degree Elbow
22.5 degree Elbow
Bracket Hanger Wall Type
Bracket Hanger Ceiling Type
Closing Plate
Closing Plate – w/o Knockouts
Adapter (Box Connector)
SKU: CWAD6 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWAD4) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
Type 1 Lay In Hinge Cover Wireway
Type 1 Lay In Screw Cover Wireway
Type 1 Lay In Screw Cover Wireway – w/o Knockouts
Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
Joiner
Straight Section Barrier
Reducer
Corner Reducer
Cross Fitting
Tee Fitting
Telecope Fitting
90 degree Elbow
45 degree Elbow
22.5 degree Elbow
Bracket Hanger Wall Type
Bracket Hanger Ceiling Type
Closing Plate
Closing Plate – w/o Knockouts
Adapter (Box Connector)
SKU: CWAD4 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWCP12NK) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
Type 1 Lay In Hinge Cover Wireway
Type 1 Lay In Screw Cover Wireway
Type 1 Lay In Screw Cover Wireway – w/o Knockouts
Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
Joiner
Straight Section Barrier
Reducer
Corner Reducer
Cross Fitting
Tee Fitting
Telecope Fitting
90 degree Elbow
45 degree Elbow
22.5 degree Elbow
Bracket Hanger Wall Type
Bracket Hanger Ceiling Type
Closing Plate
Closing Plate – w/o Knockouts
Adapter (Box Connector)
SKU: CWCP12NK -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWCP10NK) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
Type 1 Lay In Hinge Cover Wireway
Type 1 Lay In Screw Cover Wireway
Type 1 Lay In Screw Cover Wireway – w/o Knockouts
Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
Joiner
Straight Section Barrier
Reducer
Corner Reducer
Cross Fitting
Tee Fitting
Telecope Fitting
90 degree Elbow
45 degree Elbow
22.5 degree Elbow
Bracket Hanger Wall Type
Bracket Hanger Ceiling Type
Closing Plate
Closing Plate – w/o Knockouts
Adapter (Box Connector)
SKU: CWCP10NK -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWCP8NK) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
Type 1 Lay In Hinge Cover Wireway
Type 1 Lay In Screw Cover Wireway
Type 1 Lay In Screw Cover Wireway – w/o Knockouts
Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
Joiner
Straight Section Barrier
Reducer
Corner Reducer
Cross Fitting
Tee Fitting
Telecope Fitting
90 degree Elbow
45 degree Elbow
22.5 degree Elbow
Bracket Hanger Wall Type
Bracket Hanger Ceiling Type
Closing Plate
Closing Plate – w/o Knockouts
Adapter (Box Connector)
SKU: CWCP8NK -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWCP6NK) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
Type 1 Lay In Hinge Cover Wireway
Type 1 Lay In Screw Cover Wireway
Type 1 Lay In Screw Cover Wireway – w/o Knockouts
Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
Joiner
Straight Section Barrier
Reducer
Corner Reducer
Cross Fitting
Tee Fitting
Telecope Fitting
90 degree Elbow
45 degree Elbow
22.5 degree Elbow
Bracket Hanger Wall Type
Bracket Hanger Ceiling Type
Closing Plate
Closing Plate – w/o Knockouts
Adapter (Box Connector)
SKU: CWCP6NK -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWCP4NK) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
Type 1 Lay In Hinge Cover Wireway
Type 1 Lay In Screw Cover Wireway
Type 1 Lay In Screw Cover Wireway – w/o Knockouts
Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
Joiner
Straight Section Barrier
Reducer
Corner Reducer
Cross Fitting
Tee Fitting
Telecope Fitting
90 degree Elbow
45 degree Elbow
22.5 degree Elbow
Bracket Hanger Wall Type
Bracket Hanger Ceiling Type
Closing Plate
Closing Plate – w/o Knockouts
Adapter (Box Connector)
SKU: CWCP4NK