Shop By Brand
American Tech Supply Full Catalog
Showing 73489–73512 of 74602 results
-
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWHW6) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
Type 1 Lay In Hinge Cover Wireway- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWHW6 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWHW4) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWHW4 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWHD12) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWHD12 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWHD10) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWHD10 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWHD8) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWHD8 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWHD6) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWHD6 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWHD4) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWHD4 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWCRD42) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWCRD42 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWRD64) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWRD64 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWRD42) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWRD42 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWCF4) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWCF4 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWTF6) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWTF6 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWTF4) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWTF4 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWEL622) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWEL622 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWEL422) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWEL422 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWEL645) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWEL645 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWEL445) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWEL445 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWEL690) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWEL690 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWEL490) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWEL490 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWBA660) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWBA660 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWBA460) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWBA460 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWST448NK) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWST448NK -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWST436NK) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWST436NK -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWST624NK) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWST624NK
