American Tech Supply Full Catalog
Showing 74329–74352 of 75476 results
-
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWJO12) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWJO12 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWJO10) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWJO10 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWJO8) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWJO8 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWJO6) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWJO6 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWJO4) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWJO4 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWAD12) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWAD12 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWAD10) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWAD10 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWAD8) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWAD8 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWAD6) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWAD6 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWAD4) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWAD4 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWCP12NK) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWCP12NK -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWCP10NK) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWCP10NK -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWCP8NK) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWCP8NK