American Tech Supply Full Catalog
Showing 74401–74424 of 75476 results
-
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWSC436NK) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWSC436NK -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWSC624NK) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWSC624NK -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWSC424NK) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWSC424NK -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWSC618NK) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWSC618NK -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWSC418NK) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWSC418NK -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWSC812NK) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWSC812NK -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWSC612NK) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWSC612NK -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWSC412NK) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWSC412NK -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWSC460) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWSC460 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWSC448) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWSC448 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWSC636) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWSC636 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWSC436) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWSC436 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWSC624) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWSC624 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWSC424) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWSC424 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWSC812) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWSC812 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWSC612) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWSC612 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWSC412) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWSC412 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWTL2) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWTL2 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWJO2) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWJO2 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWAD2) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWAD2 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWCP2NK) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWCP2NK -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWCP2) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWCP2 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWHW2) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWHW2 -
Discontinued Products
Type 1 Lay-In Wireway CW Series – (CWHD2) (DISCONTINUED)
Application
- Construction designed to ensure electrical continuity and to permit fast and easy indoor installation of multiple wireway runs.
Standards
- UL-50 Type 1
- cUL Type 1
- Complies with
- IEC 60529, IP20
Construction – Screw Cover
- Formed from 16 or 14 gauge steel
- Flat covers have keyhole screw slots
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
- Joiners sold separately
Construction – Hinge Cover
- Formed from 16 or 14 gauge steel
- Hinge covers are hinged on 24″ centers
- Available with or without knockouts
- Straight sections are provided with adequate concentric knockouts (1/2″, 3/4″ conduit size)
- Knockouts are on 12″ centers
- Joiner is included with each straight section
- Unobstructed interior speeds up laying of cables
- Optional hanger brackets allow for vertical or horizontal mounting
Finish
- Sections and components are finished in ANSI 61 gray.
Couplings are unpainted galvanized
Accessories
- Type 1 Lay In Hinge Cover Wireway
- Type 1 Lay In Screw Cover Wireway
- Type 1 Lay In Screw Cover Wireway – w/o Knockouts
- Type 1 Lay In Hinge Cover Wireway – w/o Knockouts
- Joiner
- Straight Section Barrier
- Reducer
- Corner Reducer
- Cross Fitting
- Tee Fitting
- Telecope Fitting
- 90 degree Elbow
- 45 degree Elbow
- 22.5 degree Elbow
- Bracket Hanger Wall Type
- Bracket Hanger Ceiling Type
- Closing Plate
- Closing Plate – w/o Knockouts
- Adapter (Box Connector)
SKU: CWHD2