American Tech Supply Full Catalog
Showing 74713–74736 of 75476 results
-
Discontinued Products
Type 4/3R Mild Steel Splitter Box CN4SB Series – (CSBL225) (DISCONTINUED)
Application
- The splitter boxes are designed for distribution of up to 600 A (max) service using either 3 or 4 wires. 75° C conductor ampacity permitted.
Standards
- CSA Type 3R, 12, 4
- Complies with
- IEC 60529, IP66
Construction
- Formed 16 gauge steel (14 gauge on 30×24)
- Factory installed splitter blocks.
- Smooth, continuously welded seams ground smooth.
- Door stiffeners are provided where required for increased strength and rigidity – designed to also permit additional mounting options.
- Formed lip on enclosure to exclude flowing liquids and contaminants.
- Door latches feature the added safety of quarter turn slot requiring use of tool for opening.
- Doors may be easily removed for modifications and are interchangeable.
- Seamless poured-in place gasket.
- Collar studs provided for mounting inner panel.
- Includes hardware kit with panel mounting nuts and sealing washers for wall mounting holes.
- Hinges are constructed from 304 stainless steel.
- Hinge pins are stainless steel.
- Inner panel is included.
Finish
- Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating.
- Inner panel is finished in white powder coating.
Accessories
Quarter Turn Inserts and Keys
Mounting Foot Kit
Rear Hole Plugs
Replacement Hinge Pins
Quarter Turn Assemblies
Padlock Adaptor
Splitter Blocks
Grounding Kits
Ventilation
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
3 Wire 4 Wire CU/AL Enclosure Optional Splitter Part No. Part No. Amps H W D Grounding Kit Block Reference CN4SB73 CN4SB74 70/70 12.00 10.00 5.00 CGK125 CSBL125B CN4SB103 CN4SB104 125/120 15.00 10.00 5.00 CGK125 CSBL125B CN4SB203 CN4SB204 225/180 18.00 12.00 5.00 CGK225 CSBL225 CN4SB403 CN4SB404 400/400 24.00 17.00 6.00 CGK400 CSBL400 CN4SB603* CN4SB604* 600/600 30.00 24.00 7.00 CGK600 CSBL600 SKU: CSBL225 -
Discontinued Products
Type 4/3R Mild Steel Splitter Box CN4SB Series – (CSBL125B) (DISCONTINUED)
Application
- The splitter boxes are designed for distribution of up to 600 A (max) service using either 3 or 4 wires. 75° C conductor ampacity permitted.
Standards
- CSA Type 3R, 12, 4
- Complies with
- IEC 60529, IP66
Construction
- Formed 16 gauge steel (14 gauge on 30×24)
- Factory installed splitter blocks.
- Smooth, continuously welded seams ground smooth.
- Door stiffeners are provided where required for increased strength and rigidity – designed to also permit additional mounting options.
- Formed lip on enclosure to exclude flowing liquids and contaminants.
- Door latches feature the added safety of quarter turn slot requiring use of tool for opening.
- Doors may be easily removed for modifications and are interchangeable.
- Seamless poured-in place gasket.
- Collar studs provided for mounting inner panel.
- Includes hardware kit with panel mounting nuts and sealing washers for wall mounting holes.
- Hinges are constructed from 304 stainless steel.
- Hinge pins are stainless steel.
- Inner panel is included.
Finish
- Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating.
- Inner panel is finished in white powder coating.
Accessories
Quarter Turn Inserts and Keys
Mounting Foot Kit
Rear Hole Plugs
Replacement Hinge Pins
Quarter Turn Assemblies
Padlock Adaptor
Splitter Blocks
Grounding Kits
Ventilation
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
3 Wire 4 Wire CU/AL Enclosure Optional Splitter Part No. Part No. Amps H W D Grounding Kit Block Reference CN4SB73 CN4SB74 70/70 12.00 10.00 5.00 CGK125 CSBL125B CN4SB103 CN4SB104 125/120 15.00 10.00 5.00 CGK125 CSBL125B CN4SB203 CN4SB204 225/180 18.00 12.00 5.00 CGK225 CSBL225 CN4SB403 CN4SB404 400/400 24.00 17.00 6.00 CGK400 CSBL400 CN4SB603* CN4SB604* 600/600 30.00 24.00 7.00 CGK600 CSBL600 SKU: CSBL125B -
Discontinued Products
Type 1 Mild Steel Metering Cabinets (Hydro Quebec Version) (DISCONTINUED) CMC Q Series – (CMCQP2) (DISCONTINUED)
Discontinued ProductsType 1 Mild Steel Metering Cabinets (Hydro Quebec Version) (DISCONTINUED) CMC Q Series – (CMCQP2) (DISCONTINUED)
Application
- Designed for indoor housing of metering transformers per Hydro Quebec specifications.
Standards
- CSA Type 1
- Complies with
- IEC 60529, IP20
Construction
- Formed and spot welded from 14 or 16 gauge steel.
- Spot welded construction and formed edges.
- Removable inner panels.
- Hinged covers.
- 2 cutouts in top of each cabinet with metering plates included.
Finish
- Enclosure and cover are finished in ANSI 61 gray inside and out.
- Inner panel is finished in ANSI 61 gray powder coating.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Enclosure
Units shown: inch. Switch units to: mm
Part No. H W D Gauge CMCQ303010 30.00 30.00 10.00 16 CMCQ363612 36.00 36.00 12.00 14 CMCQ484812 48.00 48.00 12.00 14 Panel Selection Guide
Panel supplied with enclosure Panel capacity per enclosure Part No. CMCQP1 CMCQP2 CMCQP3 CMCQP1 CMCQP2 CMCQP3 CMCQ303010 1 1 1 1 1 1 CMCQ363612 1 1 1 2 1 1 CMCQ484812 1 1 1 2 2 1 SKU: CMCQP2 -
Discontinued Products
Type 1 Mild Steel Metering Cabinets (Hydro Quebec Version) (DISCONTINUED) CMC Q Series – (CMCQP1) (DISCONTINUED)
Discontinued ProductsType 1 Mild Steel Metering Cabinets (Hydro Quebec Version) (DISCONTINUED) CMC Q Series – (CMCQP1) (DISCONTINUED)
Application
- Designed for indoor housing of metering transformers per Hydro Quebec specifications.
Standards
- CSA Type 1
- Complies with
- IEC 60529, IP20
Construction
- Formed and spot welded from 14 or 16 gauge steel.
- Spot welded construction and formed edges.
- Removable inner panels.
- Hinged covers.
- 2 cutouts in top of each cabinet with metering plates included.
Finish
- Enclosure and cover are finished in ANSI 61 gray inside and out.
- Inner panel is finished in ANSI 61 gray powder coating.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Enclosure
Units shown: inch. Switch units to: mm
Part No. H W D Gauge CMCQ303010 30.00 30.00 10.00 16 CMCQ363612 36.00 36.00 12.00 14 CMCQ484812 48.00 48.00 12.00 14 Panel Selection Guide
Panel supplied with enclosure Panel capacity per enclosure Part No. CMCQP1 CMCQP2 CMCQP3 CMCQP1 CMCQP2 CMCQP3 CMCQ303010 1 1 1 1 1 1 CMCQ363612 1 1 1 2 1 1 CMCQ484812 1 1 1 2 2 1 SKU: CMCQP1 -
Discontinued Products
Type 1 Mild Steel Junction Box CHKO Series – (CHKO18126) (DISCONTINUED)
Application
- Designed for general purpose indoor commercial use as a junction, pull or switch box.
- Hinged cover with latch provides easy access during installation and maintenance.
Standards
- UL-50 Type 1
- CSA Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge (up to 30″x24″) or 14 gauge (36″x24″) steel.
- Formed steel covers close by use of slotted quarter turn latch.
- Full swing, hinged door. NOTE: Former butt hinge being transitioned to new integral design starting late 2020. See image gallery for view of new hinge.
- Easily removed knockouts on all 4 sides (see drawings for sizes and locations).
- Through holes in back for wall mounting.
- Grounding location embossed in body.
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D CHKO663 6.00 6.00 3.50 CHKO644 6.00 4.00 4.00 CHKO664 6.00 6.00 4.00 CHKO864 8.00 6.00 4.00 CHKO884 8.00 8.00 4.00 CHKO1084 10.00 8.00 4.00 CHKO10104 10.00 10.00 4.00 CHKO1284 12.00 8.00 4.00 CHKO12104 12.00 10.00 4.00 CHKO12124 12.00 12.00 4.00 CHKO16124 16.00 12.00 4.00 CHKO18124 18.00 12.00 4.00 CHKO666 6.00 6.00 6.00 CHKO886 8.00 8.00 6.00 CHKO1086 10.00 8.00 6.00 CHKO10106 10.00 10.00 6.00 CHKO12106 12.00 10.00 6.00 CHKO12126 12.00 12.00 6.00 CHKO16126 16.00 12.00 6.00 CHKO16166 16.00 16.00 6.00 CHKO18126 18.00 12.00 6.00 CHKO18186 18.00 18.00 6.00 CHKO24186 24.00 18.00 6.00 CHKO24246 24.00 24.00 6.00 CHKO30246 30.00 24.00 6.00 CHKO36246 36.00 24.00 6.00 CHKO36248 36.00 24.00 8.00 SKU: CHKO18126 -
Discontinued Products
Type 1 Mild Steel Junction Box CHKO Series – (CHKO16166) (DISCONTINUED)
Application
- Designed for general purpose indoor commercial use as a junction, pull or switch box.
- Hinged cover with latch provides easy access during installation and maintenance.
Standards
- UL-50 Type 1
- CSA Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge (up to 30″x24″) or 14 gauge (36″x24″) steel.
- Formed steel covers close by use of slotted quarter turn latch.
- Full swing, hinged door. NOTE: Former butt hinge being transitioned to new integral design starting late 2020. See image gallery for view of new hinge.
- Easily removed knockouts on all 4 sides (see drawings for sizes and locations).
- Through holes in back for wall mounting.
- Grounding location embossed in body.
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D CHKO663 6.00 6.00 3.50 CHKO644 6.00 4.00 4.00 CHKO664 6.00 6.00 4.00 CHKO864 8.00 6.00 4.00 CHKO884 8.00 8.00 4.00 CHKO1084 10.00 8.00 4.00 CHKO10104 10.00 10.00 4.00 CHKO1284 12.00 8.00 4.00 CHKO12104 12.00 10.00 4.00 CHKO12124 12.00 12.00 4.00 CHKO16124 16.00 12.00 4.00 CHKO18124 18.00 12.00 4.00 CHKO666 6.00 6.00 6.00 CHKO886 8.00 8.00 6.00 CHKO1086 10.00 8.00 6.00 CHKO10106 10.00 10.00 6.00 CHKO12106 12.00 10.00 6.00 CHKO12126 12.00 12.00 6.00 CHKO16126 16.00 12.00 6.00 CHKO16166 16.00 16.00 6.00 CHKO18126 18.00 12.00 6.00 CHKO18186 18.00 18.00 6.00 CHKO24186 24.00 18.00 6.00 CHKO24246 24.00 24.00 6.00 CHKO30246 30.00 24.00 6.00 CHKO36246 36.00 24.00 6.00 CHKO36248 36.00 24.00 8.00 SKU: CHKO16166 -
Discontinued Products
Type 1 Mild Steel Junction Box CHKO Series – (CHKO16126) (DISCONTINUED)
Application
- Designed for general purpose indoor commercial use as a junction, pull or switch box.
- Hinged cover with latch provides easy access during installation and maintenance.
Standards
- UL-50 Type 1
- CSA Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge (up to 30″x24″) or 14 gauge (36″x24″) steel.
- Formed steel covers close by use of slotted quarter turn latch.
- Full swing, hinged door. NOTE: Former butt hinge being transitioned to new integral design starting late 2020. See image gallery for view of new hinge.
- Easily removed knockouts on all 4 sides (see drawings for sizes and locations).
- Through holes in back for wall mounting.
- Grounding location embossed in body.
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D CHKO663 6.00 6.00 3.50 CHKO644 6.00 4.00 4.00 CHKO664 6.00 6.00 4.00 CHKO864 8.00 6.00 4.00 CHKO884 8.00 8.00 4.00 CHKO1084 10.00 8.00 4.00 CHKO10104 10.00 10.00 4.00 CHKO1284 12.00 8.00 4.00 CHKO12104 12.00 10.00 4.00 CHKO12124 12.00 12.00 4.00 CHKO16124 16.00 12.00 4.00 CHKO18124 18.00 12.00 4.00 CHKO666 6.00 6.00 6.00 CHKO886 8.00 8.00 6.00 CHKO1086 10.00 8.00 6.00 CHKO10106 10.00 10.00 6.00 CHKO12106 12.00 10.00 6.00 CHKO12126 12.00 12.00 6.00 CHKO16126 16.00 12.00 6.00 CHKO16166 16.00 16.00 6.00 CHKO18126 18.00 12.00 6.00 CHKO18186 18.00 18.00 6.00 CHKO24186 24.00 18.00 6.00 CHKO24246 24.00 24.00 6.00 CHKO30246 30.00 24.00 6.00 CHKO36246 36.00 24.00 6.00 CHKO36248 36.00 24.00 8.00 SKU: CHKO16126 -
Discontinued Products
Type 1 Mild Steel Junction Box CHKO Series – (CHKO12126) (DISCONTINUED)
Application
- Designed for general purpose indoor commercial use as a junction, pull or switch box.
- Hinged cover with latch provides easy access during installation and maintenance.
Standards
- UL-50 Type 1
- CSA Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge (up to 30″x24″) or 14 gauge (36″x24″) steel.
- Formed steel covers close by use of slotted quarter turn latch.
- Full swing, hinged door. NOTE: Former butt hinge being transitioned to new integral design starting late 2020. See image gallery for view of new hinge.
- Easily removed knockouts on all 4 sides (see drawings for sizes and locations).
- Through holes in back for wall mounting.
- Grounding location embossed in body.
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D CHKO663 6.00 6.00 3.50 CHKO644 6.00 4.00 4.00 CHKO664 6.00 6.00 4.00 CHKO864 8.00 6.00 4.00 CHKO884 8.00 8.00 4.00 CHKO1084 10.00 8.00 4.00 CHKO10104 10.00 10.00 4.00 CHKO1284 12.00 8.00 4.00 CHKO12104 12.00 10.00 4.00 CHKO12124 12.00 12.00 4.00 CHKO16124 16.00 12.00 4.00 CHKO18124 18.00 12.00 4.00 CHKO666 6.00 6.00 6.00 CHKO886 8.00 8.00 6.00 CHKO1086 10.00 8.00 6.00 CHKO10106 10.00 10.00 6.00 CHKO12106 12.00 10.00 6.00 CHKO12126 12.00 12.00 6.00 CHKO16126 16.00 12.00 6.00 CHKO16166 16.00 16.00 6.00 CHKO18126 18.00 12.00 6.00 CHKO18186 18.00 18.00 6.00 CHKO24186 24.00 18.00 6.00 CHKO24246 24.00 24.00 6.00 CHKO30246 30.00 24.00 6.00 CHKO36246 36.00 24.00 6.00 CHKO36248 36.00 24.00 8.00 SKU: CHKO12126 -
Discontinued Products
Type 1 Mild Steel Junction Box CHKO Series – (CHKO12106) (DISCONTINUED)
Application
- Designed for general purpose indoor commercial use as a junction, pull or switch box.
- Hinged cover with latch provides easy access during installation and maintenance.
Standards
- UL-50 Type 1
- CSA Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge (up to 30″x24″) or 14 gauge (36″x24″) steel.
- Formed steel covers close by use of slotted quarter turn latch.
- Full swing, hinged door. NOTE: Former butt hinge being transitioned to new integral design starting late 2020. See image gallery for view of new hinge.
- Easily removed knockouts on all 4 sides (see drawings for sizes and locations).
- Through holes in back for wall mounting.
- Grounding location embossed in body.
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D CHKO663 6.00 6.00 3.50 CHKO644 6.00 4.00 4.00 CHKO664 6.00 6.00 4.00 CHKO864 8.00 6.00 4.00 CHKO884 8.00 8.00 4.00 CHKO1084 10.00 8.00 4.00 CHKO10104 10.00 10.00 4.00 CHKO1284 12.00 8.00 4.00 CHKO12104 12.00 10.00 4.00 CHKO12124 12.00 12.00 4.00 CHKO16124 16.00 12.00 4.00 CHKO18124 18.00 12.00 4.00 CHKO666 6.00 6.00 6.00 CHKO886 8.00 8.00 6.00 CHKO1086 10.00 8.00 6.00 CHKO10106 10.00 10.00 6.00 CHKO12106 12.00 10.00 6.00 CHKO12126 12.00 12.00 6.00 CHKO16126 16.00 12.00 6.00 CHKO16166 16.00 16.00 6.00 CHKO18126 18.00 12.00 6.00 CHKO18186 18.00 18.00 6.00 CHKO24186 24.00 18.00 6.00 CHKO24246 24.00 24.00 6.00 CHKO30246 30.00 24.00 6.00 CHKO36246 36.00 24.00 6.00 CHKO36248 36.00 24.00 8.00 SKU: CHKO12106 -
Discontinued Products
Type 1 Mild Steel Junction Box CHKO Series – (CHKO10106) (DISCONTINUED)
Application
- Designed for general purpose indoor commercial use as a junction, pull or switch box.
- Hinged cover with latch provides easy access during installation and maintenance.
Standards
- UL-50 Type 1
- CSA Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge (up to 30″x24″) or 14 gauge (36″x24″) steel.
- Formed steel covers close by use of slotted quarter turn latch.
- Full swing, hinged door. NOTE: Former butt hinge being transitioned to new integral design starting late 2020. See image gallery for view of new hinge.
- Easily removed knockouts on all 4 sides (see drawings for sizes and locations).
- Through holes in back for wall mounting.
- Grounding location embossed in body.
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D CHKO663 6.00 6.00 3.50 CHKO644 6.00 4.00 4.00 CHKO664 6.00 6.00 4.00 CHKO864 8.00 6.00 4.00 CHKO884 8.00 8.00 4.00 CHKO1084 10.00 8.00 4.00 CHKO10104 10.00 10.00 4.00 CHKO1284 12.00 8.00 4.00 CHKO12104 12.00 10.00 4.00 CHKO12124 12.00 12.00 4.00 CHKO16124 16.00 12.00 4.00 CHKO18124 18.00 12.00 4.00 CHKO666 6.00 6.00 6.00 CHKO886 8.00 8.00 6.00 CHKO1086 10.00 8.00 6.00 CHKO10106 10.00 10.00 6.00 CHKO12106 12.00 10.00 6.00 CHKO12126 12.00 12.00 6.00 CHKO16126 16.00 12.00 6.00 CHKO16166 16.00 16.00 6.00 CHKO18126 18.00 12.00 6.00 CHKO18186 18.00 18.00 6.00 CHKO24186 24.00 18.00 6.00 CHKO24246 24.00 24.00 6.00 CHKO30246 30.00 24.00 6.00 CHKO36246 36.00 24.00 6.00 CHKO36248 36.00 24.00 8.00 SKU: CHKO10106 -
Discontinued Products
Type 1 Mild Steel Junction Box CHKO Series – (CHKO1086) (DISCONTINUED)
Application
- Designed for general purpose indoor commercial use as a junction, pull or switch box.
- Hinged cover with latch provides easy access during installation and maintenance.
Standards
- UL-50 Type 1
- CSA Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge (up to 30″x24″) or 14 gauge (36″x24″) steel.
- Formed steel covers close by use of slotted quarter turn latch.
- Full swing, hinged door. NOTE: Former butt hinge being transitioned to new integral design starting late 2020. See image gallery for view of new hinge.
- Easily removed knockouts on all 4 sides (see drawings for sizes and locations).
- Through holes in back for wall mounting.
- Grounding location embossed in body.
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D CHKO663 6.00 6.00 3.50 CHKO644 6.00 4.00 4.00 CHKO664 6.00 6.00 4.00 CHKO864 8.00 6.00 4.00 CHKO884 8.00 8.00 4.00 CHKO1084 10.00 8.00 4.00 CHKO10104 10.00 10.00 4.00 CHKO1284 12.00 8.00 4.00 CHKO12104 12.00 10.00 4.00 CHKO12124 12.00 12.00 4.00 CHKO16124 16.00 12.00 4.00 CHKO18124 18.00 12.00 4.00 CHKO666 6.00 6.00 6.00 CHKO886 8.00 8.00 6.00 CHKO1086 10.00 8.00 6.00 CHKO10106 10.00 10.00 6.00 CHKO12106 12.00 10.00 6.00 CHKO12126 12.00 12.00 6.00 CHKO16126 16.00 12.00 6.00 CHKO16166 16.00 16.00 6.00 CHKO18126 18.00 12.00 6.00 CHKO18186 18.00 18.00 6.00 CHKO24186 24.00 18.00 6.00 CHKO24246 24.00 24.00 6.00 CHKO30246 30.00 24.00 6.00 CHKO36246 36.00 24.00 6.00 CHKO36248 36.00 24.00 8.00 SKU: CHKO1086 -
Discontinued Products
Type 1 Mild Steel Junction Box CHKO Series – (CHKO886) (DISCONTINUED)
Application
- Designed for general purpose indoor commercial use as a junction, pull or switch box.
- Hinged cover with latch provides easy access during installation and maintenance.
Standards
- UL-50 Type 1
- CSA Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge (up to 30″x24″) or 14 gauge (36″x24″) steel.
- Formed steel covers close by use of slotted quarter turn latch.
- Full swing, hinged door. NOTE: Former butt hinge being transitioned to new integral design starting late 2020. See image gallery for view of new hinge.
- Easily removed knockouts on all 4 sides (see drawings for sizes and locations).
- Through holes in back for wall mounting.
- Grounding location embossed in body.
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D CHKO663 6.00 6.00 3.50 CHKO644 6.00 4.00 4.00 CHKO664 6.00 6.00 4.00 CHKO864 8.00 6.00 4.00 CHKO884 8.00 8.00 4.00 CHKO1084 10.00 8.00 4.00 CHKO10104 10.00 10.00 4.00 CHKO1284 12.00 8.00 4.00 CHKO12104 12.00 10.00 4.00 CHKO12124 12.00 12.00 4.00 CHKO16124 16.00 12.00 4.00 CHKO18124 18.00 12.00 4.00 CHKO666 6.00 6.00 6.00 CHKO886 8.00 8.00 6.00 CHKO1086 10.00 8.00 6.00 CHKO10106 10.00 10.00 6.00 CHKO12106 12.00 10.00 6.00 CHKO12126 12.00 12.00 6.00 CHKO16126 16.00 12.00 6.00 CHKO16166 16.00 16.00 6.00 CHKO18126 18.00 12.00 6.00 CHKO18186 18.00 18.00 6.00 CHKO24186 24.00 18.00 6.00 CHKO24246 24.00 24.00 6.00 CHKO30246 30.00 24.00 6.00 CHKO36246 36.00 24.00 6.00 CHKO36248 36.00 24.00 8.00 SKU: CHKO886 -
Discontinued Products
Type 1 Mild Steel Junction Box CHKO Series – (CHKO666) (DISCONTINUED)
Application
- Designed for general purpose indoor commercial use as a junction, pull or switch box.
- Hinged cover with latch provides easy access during installation and maintenance.
Standards
- UL-50 Type 1
- CSA Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge (up to 30″x24″) or 14 gauge (36″x24″) steel.
- Formed steel covers close by use of slotted quarter turn latch.
- Full swing, hinged door. NOTE: Former butt hinge being transitioned to new integral design starting late 2020. See image gallery for view of new hinge.
- Easily removed knockouts on all 4 sides (see drawings for sizes and locations).
- Through holes in back for wall mounting.
- Grounding location embossed in body.
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D CHKO663 6.00 6.00 3.50 CHKO644 6.00 4.00 4.00 CHKO664 6.00 6.00 4.00 CHKO864 8.00 6.00 4.00 CHKO884 8.00 8.00 4.00 CHKO1084 10.00 8.00 4.00 CHKO10104 10.00 10.00 4.00 CHKO1284 12.00 8.00 4.00 CHKO12104 12.00 10.00 4.00 CHKO12124 12.00 12.00 4.00 CHKO16124 16.00 12.00 4.00 CHKO18124 18.00 12.00 4.00 CHKO666 6.00 6.00 6.00 CHKO886 8.00 8.00 6.00 CHKO1086 10.00 8.00 6.00 CHKO10106 10.00 10.00 6.00 CHKO12106 12.00 10.00 6.00 CHKO12126 12.00 12.00 6.00 CHKO16126 16.00 12.00 6.00 CHKO16166 16.00 16.00 6.00 CHKO18126 18.00 12.00 6.00 CHKO18186 18.00 18.00 6.00 CHKO24186 24.00 18.00 6.00 CHKO24246 24.00 24.00 6.00 CHKO30246 30.00 24.00 6.00 CHKO36246 36.00 24.00 6.00 CHKO36248 36.00 24.00 8.00 SKU: CHKO666 -
Discontinued Products
Type 1 Mild Steel Junction Box CHKO Series – (CHKO18124) (DISCONTINUED)
Application
- Designed for general purpose indoor commercial use as a junction, pull or switch box.
- Hinged cover with latch provides easy access during installation and maintenance.
Standards
- UL-50 Type 1
- CSA Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge (up to 30″x24″) or 14 gauge (36″x24″) steel.
- Formed steel covers close by use of slotted quarter turn latch.
- Full swing, hinged door. NOTE: Former butt hinge being transitioned to new integral design starting late 2020. See image gallery for view of new hinge.
- Easily removed knockouts on all 4 sides (see drawings for sizes and locations).
- Through holes in back for wall mounting.
- Grounding location embossed in body.
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D CHKO663 6.00 6.00 3.50 CHKO644 6.00 4.00 4.00 CHKO664 6.00 6.00 4.00 CHKO864 8.00 6.00 4.00 CHKO884 8.00 8.00 4.00 CHKO1084 10.00 8.00 4.00 CHKO10104 10.00 10.00 4.00 CHKO1284 12.00 8.00 4.00 CHKO12104 12.00 10.00 4.00 CHKO12124 12.00 12.00 4.00 CHKO16124 16.00 12.00 4.00 CHKO18124 18.00 12.00 4.00 CHKO666 6.00 6.00 6.00 CHKO886 8.00 8.00 6.00 CHKO1086 10.00 8.00 6.00 CHKO10106 10.00 10.00 6.00 CHKO12106 12.00 10.00 6.00 CHKO12126 12.00 12.00 6.00 CHKO16126 16.00 12.00 6.00 CHKO16166 16.00 16.00 6.00 CHKO18126 18.00 12.00 6.00 CHKO18186 18.00 18.00 6.00 CHKO24186 24.00 18.00 6.00 CHKO24246 24.00 24.00 6.00 CHKO30246 30.00 24.00 6.00 CHKO36246 36.00 24.00 6.00 CHKO36248 36.00 24.00 8.00 SKU: CHKO18124 -
Discontinued Products
Type 1 Mild Steel Junction Box CHKO Series – (CHKO16124) (DISCONTINUED)
Application
- Designed for general purpose indoor commercial use as a junction, pull or switch box.
- Hinged cover with latch provides easy access during installation and maintenance.
Standards
- UL-50 Type 1
- CSA Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge (up to 30″x24″) or 14 gauge (36″x24″) steel.
- Formed steel covers close by use of slotted quarter turn latch.
- Full swing, hinged door. NOTE: Former butt hinge being transitioned to new integral design starting late 2020. See image gallery for view of new hinge.
- Easily removed knockouts on all 4 sides (see drawings for sizes and locations).
- Through holes in back for wall mounting.
- Grounding location embossed in body.
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D CHKO663 6.00 6.00 3.50 CHKO644 6.00 4.00 4.00 CHKO664 6.00 6.00 4.00 CHKO864 8.00 6.00 4.00 CHKO884 8.00 8.00 4.00 CHKO1084 10.00 8.00 4.00 CHKO10104 10.00 10.00 4.00 CHKO1284 12.00 8.00 4.00 CHKO12104 12.00 10.00 4.00 CHKO12124 12.00 12.00 4.00 CHKO16124 16.00 12.00 4.00 CHKO18124 18.00 12.00 4.00 CHKO666 6.00 6.00 6.00 CHKO886 8.00 8.00 6.00 CHKO1086 10.00 8.00 6.00 CHKO10106 10.00 10.00 6.00 CHKO12106 12.00 10.00 6.00 CHKO12126 12.00 12.00 6.00 CHKO16126 16.00 12.00 6.00 CHKO16166 16.00 16.00 6.00 CHKO18126 18.00 12.00 6.00 CHKO18186 18.00 18.00 6.00 CHKO24186 24.00 18.00 6.00 CHKO24246 24.00 24.00 6.00 CHKO30246 30.00 24.00 6.00 CHKO36246 36.00 24.00 6.00 CHKO36248 36.00 24.00 8.00 SKU: CHKO16124 -
Discontinued Products
Type 1 Mild Steel Junction Box CHKO Series – (CHKO12124) (DISCONTINUED)
Application
- Designed for general purpose indoor commercial use as a junction, pull or switch box.
- Hinged cover with latch provides easy access during installation and maintenance.
Standards
- UL-50 Type 1
- CSA Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge (up to 30″x24″) or 14 gauge (36″x24″) steel.
- Formed steel covers close by use of slotted quarter turn latch.
- Full swing, hinged door. NOTE: Former butt hinge being transitioned to new integral design starting late 2020. See image gallery for view of new hinge.
- Easily removed knockouts on all 4 sides (see drawings for sizes and locations).
- Through holes in back for wall mounting.
- Grounding location embossed in body.
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D CHKO663 6.00 6.00 3.50 CHKO644 6.00 4.00 4.00 CHKO664 6.00 6.00 4.00 CHKO864 8.00 6.00 4.00 CHKO884 8.00 8.00 4.00 CHKO1084 10.00 8.00 4.00 CHKO10104 10.00 10.00 4.00 CHKO1284 12.00 8.00 4.00 CHKO12104 12.00 10.00 4.00 CHKO12124 12.00 12.00 4.00 CHKO16124 16.00 12.00 4.00 CHKO18124 18.00 12.00 4.00 CHKO666 6.00 6.00 6.00 CHKO886 8.00 8.00 6.00 CHKO1086 10.00 8.00 6.00 CHKO10106 10.00 10.00 6.00 CHKO12106 12.00 10.00 6.00 CHKO12126 12.00 12.00 6.00 CHKO16126 16.00 12.00 6.00 CHKO16166 16.00 16.00 6.00 CHKO18126 18.00 12.00 6.00 CHKO18186 18.00 18.00 6.00 CHKO24186 24.00 18.00 6.00 CHKO24246 24.00 24.00 6.00 CHKO30246 30.00 24.00 6.00 CHKO36246 36.00 24.00 6.00 CHKO36248 36.00 24.00 8.00 SKU: CHKO12124 -
Discontinued Products
Type 1 Mild Steel Junction Box CHKO Series – (CHKO12104) (DISCONTINUED)
Application
- Designed for general purpose indoor commercial use as a junction, pull or switch box.
- Hinged cover with latch provides easy access during installation and maintenance.
Standards
- UL-50 Type 1
- CSA Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge (up to 30″x24″) or 14 gauge (36″x24″) steel.
- Formed steel covers close by use of slotted quarter turn latch.
- Full swing, hinged door. NOTE: Former butt hinge being transitioned to new integral design starting late 2020. See image gallery for view of new hinge.
- Easily removed knockouts on all 4 sides (see drawings for sizes and locations).
- Through holes in back for wall mounting.
- Grounding location embossed in body.
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D CHKO663 6.00 6.00 3.50 CHKO644 6.00 4.00 4.00 CHKO664 6.00 6.00 4.00 CHKO864 8.00 6.00 4.00 CHKO884 8.00 8.00 4.00 CHKO1084 10.00 8.00 4.00 CHKO10104 10.00 10.00 4.00 CHKO1284 12.00 8.00 4.00 CHKO12104 12.00 10.00 4.00 CHKO12124 12.00 12.00 4.00 CHKO16124 16.00 12.00 4.00 CHKO18124 18.00 12.00 4.00 CHKO666 6.00 6.00 6.00 CHKO886 8.00 8.00 6.00 CHKO1086 10.00 8.00 6.00 CHKO10106 10.00 10.00 6.00 CHKO12106 12.00 10.00 6.00 CHKO12126 12.00 12.00 6.00 CHKO16126 16.00 12.00 6.00 CHKO16166 16.00 16.00 6.00 CHKO18126 18.00 12.00 6.00 CHKO18186 18.00 18.00 6.00 CHKO24186 24.00 18.00 6.00 CHKO24246 24.00 24.00 6.00 CHKO30246 30.00 24.00 6.00 CHKO36246 36.00 24.00 6.00 CHKO36248 36.00 24.00 8.00 SKU: CHKO12104 -
Discontinued Products
Type 1 Mild Steel Junction Box CHKO Series – (CHKO1284) (DISCONTINUED)
Application
- Designed for general purpose indoor commercial use as a junction, pull or switch box.
- Hinged cover with latch provides easy access during installation and maintenance.
Standards
- UL-50 Type 1
- CSA Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge (up to 30″x24″) or 14 gauge (36″x24″) steel.
- Formed steel covers close by use of slotted quarter turn latch.
- Full swing, hinged door. NOTE: Former butt hinge being transitioned to new integral design starting late 2020. See image gallery for view of new hinge.
- Easily removed knockouts on all 4 sides (see drawings for sizes and locations).
- Through holes in back for wall mounting.
- Grounding location embossed in body.
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D CHKO663 6.00 6.00 3.50 CHKO644 6.00 4.00 4.00 CHKO664 6.00 6.00 4.00 CHKO864 8.00 6.00 4.00 CHKO884 8.00 8.00 4.00 CHKO1084 10.00 8.00 4.00 CHKO10104 10.00 10.00 4.00 CHKO1284 12.00 8.00 4.00 CHKO12104 12.00 10.00 4.00 CHKO12124 12.00 12.00 4.00 CHKO16124 16.00 12.00 4.00 CHKO18124 18.00 12.00 4.00 CHKO666 6.00 6.00 6.00 CHKO886 8.00 8.00 6.00 CHKO1086 10.00 8.00 6.00 CHKO10106 10.00 10.00 6.00 CHKO12106 12.00 10.00 6.00 CHKO12126 12.00 12.00 6.00 CHKO16126 16.00 12.00 6.00 CHKO16166 16.00 16.00 6.00 CHKO18126 18.00 12.00 6.00 CHKO18186 18.00 18.00 6.00 CHKO24186 24.00 18.00 6.00 CHKO24246 24.00 24.00 6.00 CHKO30246 30.00 24.00 6.00 CHKO36246 36.00 24.00 6.00 CHKO36248 36.00 24.00 8.00 SKU: CHKO1284 -
Discontinued Products
Type 1 Mild Steel Junction Box CHKO Series – (CHKO10104) (DISCONTINUED)
Application
- Designed for general purpose indoor commercial use as a junction, pull or switch box.
- Hinged cover with latch provides easy access during installation and maintenance.
Standards
- UL-50 Type 1
- CSA Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge (up to 30″x24″) or 14 gauge (36″x24″) steel.
- Formed steel covers close by use of slotted quarter turn latch.
- Full swing, hinged door. NOTE: Former butt hinge being transitioned to new integral design starting late 2020. See image gallery for view of new hinge.
- Easily removed knockouts on all 4 sides (see drawings for sizes and locations).
- Through holes in back for wall mounting.
- Grounding location embossed in body.
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D CHKO663 6.00 6.00 3.50 CHKO644 6.00 4.00 4.00 CHKO664 6.00 6.00 4.00 CHKO864 8.00 6.00 4.00 CHKO884 8.00 8.00 4.00 CHKO1084 10.00 8.00 4.00 CHKO10104 10.00 10.00 4.00 CHKO1284 12.00 8.00 4.00 CHKO12104 12.00 10.00 4.00 CHKO12124 12.00 12.00 4.00 CHKO16124 16.00 12.00 4.00 CHKO18124 18.00 12.00 4.00 CHKO666 6.00 6.00 6.00 CHKO886 8.00 8.00 6.00 CHKO1086 10.00 8.00 6.00 CHKO10106 10.00 10.00 6.00 CHKO12106 12.00 10.00 6.00 CHKO12126 12.00 12.00 6.00 CHKO16126 16.00 12.00 6.00 CHKO16166 16.00 16.00 6.00 CHKO18126 18.00 12.00 6.00 CHKO18186 18.00 18.00 6.00 CHKO24186 24.00 18.00 6.00 CHKO24246 24.00 24.00 6.00 CHKO30246 30.00 24.00 6.00 CHKO36246 36.00 24.00 6.00 CHKO36248 36.00 24.00 8.00 SKU: CHKO10104 -
Discontinued Products
Type 1 Mild Steel Junction Box CHKO Series – (CHKO1084) (DISCONTINUED)
Application
- Designed for general purpose indoor commercial use as a junction, pull or switch box.
- Hinged cover with latch provides easy access during installation and maintenance.
Standards
- UL-50 Type 1
- CSA Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge (up to 30″x24″) or 14 gauge (36″x24″) steel.
- Formed steel covers close by use of slotted quarter turn latch.
- Full swing, hinged door. NOTE: Former butt hinge being transitioned to new integral design starting late 2020. See image gallery for view of new hinge.
- Easily removed knockouts on all 4 sides (see drawings for sizes and locations).
- Through holes in back for wall mounting.
- Grounding location embossed in body.
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D CHKO663 6.00 6.00 3.50 CHKO644 6.00 4.00 4.00 CHKO664 6.00 6.00 4.00 CHKO864 8.00 6.00 4.00 CHKO884 8.00 8.00 4.00 CHKO1084 10.00 8.00 4.00 CHKO10104 10.00 10.00 4.00 CHKO1284 12.00 8.00 4.00 CHKO12104 12.00 10.00 4.00 CHKO12124 12.00 12.00 4.00 CHKO16124 16.00 12.00 4.00 CHKO18124 18.00 12.00 4.00 CHKO666 6.00 6.00 6.00 CHKO886 8.00 8.00 6.00 CHKO1086 10.00 8.00 6.00 CHKO10106 10.00 10.00 6.00 CHKO12106 12.00 10.00 6.00 CHKO12126 12.00 12.00 6.00 CHKO16126 16.00 12.00 6.00 CHKO16166 16.00 16.00 6.00 CHKO18126 18.00 12.00 6.00 CHKO18186 18.00 18.00 6.00 CHKO24186 24.00 18.00 6.00 CHKO24246 24.00 24.00 6.00 CHKO30246 30.00 24.00 6.00 CHKO36246 36.00 24.00 6.00 CHKO36248 36.00 24.00 8.00 SKU: CHKO1084 -
Discontinued Products
Type 1 Mild Steel Junction Box CHKO Series – (CHKO884) (DISCONTINUED)
Application
- Designed for general purpose indoor commercial use as a junction, pull or switch box.
- Hinged cover with latch provides easy access during installation and maintenance.
Standards
- UL-50 Type 1
- CSA Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge (up to 30″x24″) or 14 gauge (36″x24″) steel.
- Formed steel covers close by use of slotted quarter turn latch.
- Full swing, hinged door. NOTE: Former butt hinge being transitioned to new integral design starting late 2020. See image gallery for view of new hinge.
- Easily removed knockouts on all 4 sides (see drawings for sizes and locations).
- Through holes in back for wall mounting.
- Grounding location embossed in body.
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D CHKO663 6.00 6.00 3.50 CHKO644 6.00 4.00 4.00 CHKO664 6.00 6.00 4.00 CHKO864 8.00 6.00 4.00 CHKO884 8.00 8.00 4.00 CHKO1084 10.00 8.00 4.00 CHKO10104 10.00 10.00 4.00 CHKO1284 12.00 8.00 4.00 CHKO12104 12.00 10.00 4.00 CHKO12124 12.00 12.00 4.00 CHKO16124 16.00 12.00 4.00 CHKO18124 18.00 12.00 4.00 CHKO666 6.00 6.00 6.00 CHKO886 8.00 8.00 6.00 CHKO1086 10.00 8.00 6.00 CHKO10106 10.00 10.00 6.00 CHKO12106 12.00 10.00 6.00 CHKO12126 12.00 12.00 6.00 CHKO16126 16.00 12.00 6.00 CHKO16166 16.00 16.00 6.00 CHKO18126 18.00 12.00 6.00 CHKO18186 18.00 18.00 6.00 CHKO24186 24.00 18.00 6.00 CHKO24246 24.00 24.00 6.00 CHKO30246 30.00 24.00 6.00 CHKO36246 36.00 24.00 6.00 CHKO36248 36.00 24.00 8.00 SKU: CHKO884 -
Discontinued Products
Type 1 Mild Steel Junction Box CHKO Series – (CHKO864) (DISCONTINUED)
Application
- Designed for general purpose indoor commercial use as a junction, pull or switch box.
- Hinged cover with latch provides easy access during installation and maintenance.
Standards
- UL-50 Type 1
- CSA Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge (up to 30″x24″) or 14 gauge (36″x24″) steel.
- Formed steel covers close by use of slotted quarter turn latch.
- Full swing, hinged door. NOTE: Former butt hinge being transitioned to new integral design starting late 2020. See image gallery for view of new hinge.
- Easily removed knockouts on all 4 sides (see drawings for sizes and locations).
- Through holes in back for wall mounting.
- Grounding location embossed in body.
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D CHKO663 6.00 6.00 3.50 CHKO644 6.00 4.00 4.00 CHKO664 6.00 6.00 4.00 CHKO864 8.00 6.00 4.00 CHKO884 8.00 8.00 4.00 CHKO1084 10.00 8.00 4.00 CHKO10104 10.00 10.00 4.00 CHKO1284 12.00 8.00 4.00 CHKO12104 12.00 10.00 4.00 CHKO12124 12.00 12.00 4.00 CHKO16124 16.00 12.00 4.00 CHKO18124 18.00 12.00 4.00 CHKO666 6.00 6.00 6.00 CHKO886 8.00 8.00 6.00 CHKO1086 10.00 8.00 6.00 CHKO10106 10.00 10.00 6.00 CHKO12106 12.00 10.00 6.00 CHKO12126 12.00 12.00 6.00 CHKO16126 16.00 12.00 6.00 CHKO16166 16.00 16.00 6.00 CHKO18126 18.00 12.00 6.00 CHKO18186 18.00 18.00 6.00 CHKO24186 24.00 18.00 6.00 CHKO24246 24.00 24.00 6.00 CHKO30246 30.00 24.00 6.00 CHKO36246 36.00 24.00 6.00 CHKO36248 36.00 24.00 8.00 SKU: CHKO864 -
Discontinued Products
Type 1 Mild Steel Junction Box CHKO Series – (CHKO664) (DISCONTINUED)
Application
- Designed for general purpose indoor commercial use as a junction, pull or switch box.
- Hinged cover with latch provides easy access during installation and maintenance.
Standards
- UL-50 Type 1
- CSA Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge (up to 30″x24″) or 14 gauge (36″x24″) steel.
- Formed steel covers close by use of slotted quarter turn latch.
- Full swing, hinged door. NOTE: Former butt hinge being transitioned to new integral design starting late 2020. See image gallery for view of new hinge.
- Easily removed knockouts on all 4 sides (see drawings for sizes and locations).
- Through holes in back for wall mounting.
- Grounding location embossed in body.
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D CHKO663 6.00 6.00 3.50 CHKO644 6.00 4.00 4.00 CHKO664 6.00 6.00 4.00 CHKO864 8.00 6.00 4.00 CHKO884 8.00 8.00 4.00 CHKO1084 10.00 8.00 4.00 CHKO10104 10.00 10.00 4.00 CHKO1284 12.00 8.00 4.00 CHKO12104 12.00 10.00 4.00 CHKO12124 12.00 12.00 4.00 CHKO16124 16.00 12.00 4.00 CHKO18124 18.00 12.00 4.00 CHKO666 6.00 6.00 6.00 CHKO886 8.00 8.00 6.00 CHKO1086 10.00 8.00 6.00 CHKO10106 10.00 10.00 6.00 CHKO12106 12.00 10.00 6.00 CHKO12126 12.00 12.00 6.00 CHKO16126 16.00 12.00 6.00 CHKO16166 16.00 16.00 6.00 CHKO18126 18.00 12.00 6.00 CHKO18186 18.00 18.00 6.00 CHKO24186 24.00 18.00 6.00 CHKO24246 24.00 24.00 6.00 CHKO30246 30.00 24.00 6.00 CHKO36246 36.00 24.00 6.00 CHKO36248 36.00 24.00 8.00 SKU: CHKO664 -
Discontinued Products
Type 1 Mild Steel Junction Box CHKO Series – (CHKO644) (DISCONTINUED)
Application
- Designed for general purpose indoor commercial use as a junction, pull or switch box.
- Hinged cover with latch provides easy access during installation and maintenance.
Standards
- UL-50 Type 1
- CSA Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge (up to 30″x24″) or 14 gauge (36″x24″) steel.
- Formed steel covers close by use of slotted quarter turn latch.
- Full swing, hinged door. NOTE: Former butt hinge being transitioned to new integral design starting late 2020. See image gallery for view of new hinge.
- Easily removed knockouts on all 4 sides (see drawings for sizes and locations).
- Through holes in back for wall mounting.
- Grounding location embossed in body.
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D CHKO663 6.00 6.00 3.50 CHKO644 6.00 4.00 4.00 CHKO664 6.00 6.00 4.00 CHKO864 8.00 6.00 4.00 CHKO884 8.00 8.00 4.00 CHKO1084 10.00 8.00 4.00 CHKO10104 10.00 10.00 4.00 CHKO1284 12.00 8.00 4.00 CHKO12104 12.00 10.00 4.00 CHKO12124 12.00 12.00 4.00 CHKO16124 16.00 12.00 4.00 CHKO18124 18.00 12.00 4.00 CHKO666 6.00 6.00 6.00 CHKO886 8.00 8.00 6.00 CHKO1086 10.00 8.00 6.00 CHKO10106 10.00 10.00 6.00 CHKO12106 12.00 10.00 6.00 CHKO12126 12.00 12.00 6.00 CHKO16126 16.00 12.00 6.00 CHKO16166 16.00 16.00 6.00 CHKO18126 18.00 12.00 6.00 CHKO18186 18.00 18.00 6.00 CHKO24186 24.00 18.00 6.00 CHKO24246 24.00 24.00 6.00 CHKO30246 30.00 24.00 6.00 CHKO36246 36.00 24.00 6.00 CHKO36248 36.00 24.00 8.00 SKU: CHKO644