American Tech Supply Full Catalog
Showing 889–912 of 75476 results
-
Discontinued Products
Type 4 Mild Steel Two Door Floormount Enclosure 1422 N4 FM QT Series – (1422N4F12FQT) (DISCONTINUED)
Discontinued ProductsType 4 Mild Steel Two Door Floormount Enclosure 1422 N4 FM QT Series – (1422N4F12FQT) (DISCONTINUED)
Application
- Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in outdoor applications for full weather protection.
Standards
- UL 508A Type 3R, 4 and 12
- CSA Type 3R, 4 and 12
- Complies with
- NEMA Type 3R, 4 12 and 13
- IEC 60529, IP66
Construction
- Enclosures are formed steel – 12 gauge (60″ high) or combination 10/12 gauge (72″ high).
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Body stiffeners are provided in the larger enclosures for extra rigidity.
- Heavy duty lifting eyebolts are provided with reinforcing support angles.
- Center post is removable for easy installation of the inner panel.
- Formed lip on door and top of enclosure opening exclude flowing liquids and contaminants.
- Continuously hinged doors may be removed by pulling the stainless steel hinge pin.
- Doors are secured with quarter turn latches.
- Provision for padlocking.
- 12″ floor stands are welded to the enclosure.
- Seamless poured-in place gasket.
- Provision for light kit mounting.
- A removable 10 gauge inner panel is included.
- Panel supports are provided for easy panel installation.
- Collar studs are provided for mounting inner panels.
- A bonding stud is provided on the door and a grounding stud is provided in the enclosure for each door.
- A literature pocket is provided for the inside of the door.
Finish
- Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating.
- Removable white inner panel is finished in white powder coating.
Accessories
- Additional Inner Panels
- Door Stop Kit
- Barrier Kits for Type 4 Floormount
- Drip Shield Kit
- Enclosure Stabilizers
- Climate Control
- Window Kits
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Panel Part No. H W D H W 1422N4B10FQT 60.13 48.06 10.69 56.00 44.00 1422N4D12FQT 60.13 60.06 12.69 56.00 56.00 1422N4E12FQT 72.13 60.06 12.69 68.00 56.00 1422N4F12FQT 72.13 72.06 12.69 68.00 68.00 1422N4F24FQT 72.13 72.06 24.69 68.00 68.00 SKU: 1422N4F12FQT -
Discontinued Products
Type 4 Mild Steel Two Door Floormount Enclosure 1422 N4 FM Series – (1422N4F12F) (DISCONTINUED)
Discontinued ProductsType 4 Mild Steel Two Door Floormount Enclosure 1422 N4 FM Series – (1422N4F12F) (DISCONTINUED)
Application
- Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in outdoor applications for full weather protection.
Standards
- UL 508A Type 3R, 4 and 12
- CSA Type 3R, 4 and 12
- Complies with
- NEMA Type 3R, 4 12 and 13
- IEC 60529, IP66
Construction
- Enclosures are formed steel – 12 gauge (60″ high) or combination 10/12 gauge (72″ high).
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Body stiffeners are provided in the larger enclosures for extra rigidity.
- Heavy duty lifting eyebolts are provided with reinforcing support angles.
- Center post is removable for easy installation of the inner panel.
- Formed lip on door and top of enclosure opening exclude flowing liquids and contaminants.
- Continuously hinged doors may be removed by pulling the stainless steel hinge pin.
- Doors are secured with heavy duty stainless steel clamps.
- Provision for padlocking.
- 12″ floor stands are welded to the enclosure.
- Seamless poured-in place gasket.
- Provision for light kit mounting.
- A removable 10 gauge inner panel is included.
- Panel supports are provided for easy panel installation.
- Collar studs are provided for mounting inner panels.
- A bonding stud is provided on the door and a grounding stud is provided in the enclosure for each door.
- A literature pocket is provided for the inside of the door.
Finish
- Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating.
- Removable white inner panel is finished in white powder coating.
Accessories
- Additional Inner Panels
- Door Stop Kit
- Barrier Kits for Type 4 Floormount
- Drip Shield Kit
- Enclosure Stabilizers
- Climate Control
- Window Kits
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
w/ Feet Enclosure Panel Part No. H W D H W 1422N4B10F 60.13 48.06 10.69 56.00 44.00 1422N4D12F 60.13 60.06 12.69 56.00 56.00 1422N4E12F 72.13 60.06 12.69 68.00 56.00 1422N4F12F 72.13 72.06 12.69 68.00 68.00 1422N4F24F 72.13 72.06 24.69 68.00 68.00 SKU: 1422N4F12F -
Power Solutions, UPS, UPS, Data Cabinets and Racks, Power Solutions, Great Lakes
UPS Solutions Online: Lead Acid – 3000V Power Capcity / 240V /4 Post Mounting / 1 SNMP Card / 1 Bypass Module / 1 External Battery – Great Lakes Data Racks and Cabinets
Power Solutions, UPS, UPS, Data Cabinets and Racks, Power Solutions, Great LakesUPS Solutions Online: Lead Acid – 3000V Power Capcity / 240V /4 Post Mounting / 1 SNMP Card / 1 Bypass Module / 1 External Battery – Great Lakes Data Racks and Cabinets
Suggested pricing, call for discounts
SKU: GLUPS-ONLA-300A-240-1BP-1M-1BY-4P -
Discontinued Products
Air to Air Heat Exchangers – Type 4X PKS4X Series – (PKS3204A115N4SS) (DISCONTINUED)
Discontinued ProductsAir to Air Heat Exchangers – Type 4X PKS4X Series – (PKS3204A115N4SS) (DISCONTINUED)
Description
- Designed for corrosive outdoor or washdown applications.
- Air to air heat exchangers provide superior technology when there is a lower surrounding air temperature compared to the target internal temperature (difference of at least 10°C/18°F).
- Closed loop cooling ensures clean enclosure air is recirculated without ever mixing with contaminated ambient air.
- Superior energy efficiency and lower maintenance costs versus air conditioners.
Standards
- Maintains enclosure’s NEMA 4X rating
- IP 56
- UR, cUR and CE
Features
- Compact Standard Size: 35″H x 12″W x 16″D (louvers extend 1.5″ on either side)
- R134a refrigerant.
- Thermostat control accessible from inside enclosure.
- EMI/RFI suppression meets CE.
- Door contact provision for power down when enclosure door is opened.
- Gasket, mounting kit and template for cutout and drilling are included.
- Can be mounted vertically or horizontally for application flexibility.
- Cover finished in unpainted 304 stainless steel
- See Manual/Technical Data Sheet for drilling template and full electrical specifications.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Cooling Capacity Dimensions Sample Performance Part No. Voltage – Frequency W/°C W/°F H W D ΔT = 20°C/36°F PKS3134A115N4SS 115V 60 Hz 65 36 35.30 11.97 16.04 1300W (4400 BTU) PKS3134A230N4SS 230V 50/60 Hz 65 36 35.30 11.97 16.04 1300W (4400 BTU) PKS3134A460N4SS 400/460V 50/60 Hz 65 36 35.30 11.97 16.04 1300W (4400BTU) PKS3204A115N4SS 115V 60 Hz 100 56 35.30 11.97 16.04 2000W (6800 BTU) PKS3204A230N4SS 230V 50/60 Hz 100 56 35.30 11.97 16.04 2000W (6800 BTU) PKS3204A460N4SS 400/460V 50/60 Hz 100 56 35.30 11.97 16.04 2000W (6800 BTU) PKS3304A115N4SS 115V 60 Hz 150 83 35.30 11.97 16.04 3000W (10200 BTU) PKS3304A230N4SS 230V 50/60 Hz 150 83 35.30 11.97 16.04 3000W (10200 BTU) PKS3304A460N4SS 400/460V 50/60 Hz 150 83 35.30 11.97 16.04 3000W (10200 BTU) PKS3364A115N4SS 115V 60 Hz 180 100 35.30 11.97 16.04 3600W (12200 BTU) PKS3364A230N4SS 230V 50/60 Hz 180 100 35.30 11.97 16.04 3600W (12200 BTU) PKS3364A460N4SS 400/460V 50/60 Hz 180 100 35.30 11.97 16.04 3600W (12200 BTU) SKU: PKS3204A115N4SS -
Power Solutions, UPS, UPS, Data Cabinets and Racks, Power Solutions, Great Lakes
UPS Solutions Online: Lead Acid – 3000V Power Capcity / 240V /2 Post Mounting / 1 SNMP Card / 1 Bypass Module / 1 External Battery – Great Lakes Data Racks and Cabinets
Power Solutions, UPS, UPS, Data Cabinets and Racks, Power Solutions, Great LakesUPS Solutions Online: Lead Acid – 3000V Power Capcity / 240V /2 Post Mounting / 1 SNMP Card / 1 Bypass Module / 1 External Battery – Great Lakes Data Racks and Cabinets
Suggested pricing, call for discounts
SKU: GLUPS-ONLA-300A-240-1BP-1M-1BY-2P -
Discontinued Products
Type 4X Polyester Wallmount Enclosure PJW Series – (PJW603614L) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL/cUL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X,12 and 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- 3/8 collar studs are provided for optional inner panel mounting, hardware included. Note: Sizes 36×36″ and larger have 8 collar studs for added stiffness.
- Stainless steel butterfly type “twist latch” door fasteners with padlock provision.
- Captive oil resistant gasket provides a positive seal.
- Integrated mounting flange.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Latch 3 Pt Handle Enclosure Optional Inner Panel Part No. Part No. H W D H W Part No. PJEC363012T PJEC3630123PT 36.48 30.50 12.18 33.00 27.00 18P3327 PJEC363012TW PJEC3630123PTW 36.48 30.50 12.18 33.00 27.00 18P3327 PJW363014L PJW363014L3PT 36.25 30.25 14.13 33.00 27.00 18P3327 PJW363610L PJW363610L3PT 36.25 36.25 10.13 33.00 33.00 18P3333 PJW363614L PJW363614L3PT 36.25 36.25 14.13 33.00 33.00 18P3333 PJW483610L PJW483610L3PT 48.25 36.25 10.13 45.00 33.00 18P4533 PJW483614L PJW483614L3PT 48.25 36.25 14.13 45.00 33.00 18P4533 PJW603610L PJW603610L3PT 60.25 36.25 10.13 57.00 33.00 18P5733 PJW603614L PJW603614L3PT 60.25 36.25 14.13 57.00 33.00 18P5733 SKU: PJW603614L -
Discontinued Products
Type 4X Polyester Wallmount Enclosure PJW Series – (PJW603610L3PT) (DISCONTINUED)
Discontinued ProductsType 4X Polyester Wallmount Enclosure PJW Series – (PJW603610L3PT) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
- Ideal in applications with high temperatures or highly corrosive environments.
Standards
- UL/cUL 508A Type 1, 2, 3, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 4, 4X,12 and 13
- IEC 60529, IP66
Construction
- Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
- Enhanced UV inhibitors protect against outdoor weathering.
- 3/8 collar studs are provided for optional inner panel mounting, hardware included. Note: Sizes 36×36″ and larger have 8 collar studs for added stiffness.
- Stainless steel butterfly type “twist latch” door fasteners with padlock provision.
- Captive oil resistant gasket provides a positive seal.
- Integrated mounting flange.
- Operating temperatures between 130°C and -40°C (266°F to -40°F).
- Impact index of 6.78J (5 ft/lb).
- For corrosion resistance information, please refer to table in the Technical Information section.
Finish
- Fiberglass polyester material has a gray finish.
- Optional inner panels are available in white powder coated finished steel.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Latch 3 Pt Handle Enclosure Optional Inner Panel Part No. Part No. H W D H W Part No. PJEC363012T PJEC3630123PT 36.48 30.50 12.18 33.00 27.00 18P3327 PJEC363012TW PJEC3630123PTW 36.48 30.50 12.18 33.00 27.00 18P3327 PJW363014L PJW363014L3PT 36.25 30.25 14.13 33.00 27.00 18P3327 PJW363610L PJW363610L3PT 36.25 36.25 10.13 33.00 33.00 18P3333 PJW363614L PJW363614L3PT 36.25 36.25 14.13 33.00 33.00 18P3333 PJW483610L PJW483610L3PT 48.25 36.25 10.13 45.00 33.00 18P4533 PJW483614L PJW483614L3PT 48.25 36.25 14.13 45.00 33.00 18P4533 PJW603610L PJW603610L3PT 60.25 36.25 10.13 57.00 33.00 18P5733 PJW603614L PJW603614L3PT 60.25 36.25 14.13 57.00 33.00 18P5733 SKU: PJW603610L3PT -
Discontinued Products
Type 12 Mild Steel Two Door Modular Freestanding Enclosure HME Series – (HMET18188) (DISCONTINUED)
Discontinued ProductsType 12 Mild Steel Two Door Modular Freestanding Enclosure HME Series – (HMET18188) (DISCONTINUED)
Application
- The HMET 2 door product line provides users with a rugged housing for industrial control and operator interface in industrial environments.
- Modular design permits joining of units together for large scale and mixed use applications.
- Frame’s 25mm hole pattern provides extensive component and accessory mounting flexibility.
- A broad range of industry standard sizes are offered.
Standards
- UL 508A Type 12
- CSA Type 12
- Complies with
- NEMA Type 12
- IEC 60529 IP54
Configuration
- Frame
- Removable solid top panel
- Lifting eyebolts (4)
- Removable bottom panel w/gland plates
- Two overlapping solid front doors with door frames
- Removable rear cover panels (1 or 2 depending on width) with welded rear center post on units 1000 mm and wider.
- Full width inner mounting panel
Construction
- Formed 14 gauge steel.
- Fully welded frame with 25mm hole pattern for superior mounting flexibility.
- Foam gasket on all openings provides a dust-tight seal.
- Reinforced eyebolts are provided for easy enclosure lifting.
- Frames can be joined together with an optional joining kit.
- Doors can be easily interchanged, removed and/or reversed.
- Door opening 135°.
- Optional formed 14 gauge steel side panels are sold separately (in pairs).
- Bonding and grounding studs are provided for all doors and panels.
Finish
- Phosphatized and finished in RAL 7035 light gray powder coating.
- Inner panel is unpainted galvanized 12 gauge steel.
- SPECIAL TEMPORARY NOTE: Due to industry shortages of large galvanized steel sheets, some larger inner panels will be substituted with painted steel versions.
Accessories
- Side Mounting Inner Panels
- Side Mounting Barrier Panels
- Additional Inner Panels
- Bridge Panel
- Grid System
- Mounting Hardware
- HME Handles
- Frame Joining Kit
- Side Panels
- Plinth
- Climate Control
- Lighting
- Additional HME Accessories
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: mm. Switch units to: inch