American Tech Supply Full Catalog
Showing 913–936 of 75476 results
-
Discontinued Products
Type 12 Mild Steel Two Door Freestanding Enclosure 1418 FS Series – (1418BYD24) (DISCONTINUED)
Discontinued ProductsType 12 Mild Steel Two Door Freestanding Enclosure 1418 FS Series – (1418BYD24) (DISCONTINUED)
Application
- Designed to house electrical, electronic, hydraulic or pneumatic controls with provision for panel mounting or rack mounting of equipment.
- Provides a degree of protection from falling dirt, dust, oil and water.
- Available with front access only or both front and rear access.
- A variety of inner panels, rack mounting angles and swing frames are available to provide flexibility in equipment mounting.
Standards
- UL 508A Type 12
- CSA Type 12
- Complies with
- NEMA Type 12
- IEC 60529, IP54
Construction
- Formed 12 gauge steel (10 gauge on back of single access enclosures).
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Stiffeners on the rear of the enclosure provide rigidity. (Single access)
- Lifting eyes provide for easy enclosure handling.
- Doors are supported with heavy gauge continuous hinges.
- Doors are secured with a three point latch and operated with a key locking automotive type handle.
- Latch rods are equipped with rollers for easier door closing.
- Oil resistant gaskets are permanently secured.
- Provision for light kit mounting.
- Mounting channels are welded on the inside of the enclosure for mounting of optional inner panels or rack equipment rails.
- A bonding stud is provided on the door and a grounding stud is provided in the enclosure for each door.
- A literature pocket is provided for the inside of the door (Two pockets are provided for dual access units).
Finish
- Cover and enclosure are phosphatized and finished in recoatable smooth ANSI 61 gray powder coating.
- Optional inner panels, rails, frames and supports are available in white powder coating.
Accessories
- Inner Panels
- Center Panel Supports
- Panel Rails
- Swing Out Frames
- Door Stop Kit
- Top Hat Cable Modules
- Climate Control
- Window Kits
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Single Access
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D Optional
Full Panel¹1418AW18 60.06 48.06 18.06 60AWFW 1418ZW18 72.06 48.06 18.06 72ZWFW 1418ZX18 72.06 60.06 18.06 72ZXFW 1418ZY18 72.06 72.06 18.06 72ZYFW 1418BW20 90.06 48.06 20.06 90BWFW 1418BY20 90.06 72.06 20.06 90BYFW 1418BY24 90.06 72.06 24.06 90BYFW 1418ZW24 72.06 48.06 24.06 72ZWFW 1418ZX24 72.06 60.06 24.06 72ZXFW 1418ZY24 72.06 72.06 24.06 72ZYFW 1418ZX36 72.06 60.06 36.06 72ZXFW 1418BY36 90.06 72.06 36.06 90BYFW SKU: 1418BYD24 -
Discontinued Products
Type 4 Two Door Freestanding Enclosure HN4 FSTD Series – (HN4FS726024DA) (DISCONTINUED)
Discontinued ProductsType 4 Two Door Freestanding Enclosure HN4 FSTD Series – (HN4FS726024DA) (DISCONTINUED)
Application
- Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications.
Construction
- Formed 12 gauge steel.
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Heavy duty stainless steel lifting eyebolts are provided with reinforcing support angles.
- Doors are supported with heavy gauge continuous hinges.
- Dual Access versions have doors front and back.
- 3-pt padlocking door handle.
- Seamless poured-in place gasket.
- A grounding stud is provided in the enclosure and a bonding stud is provided on the door.
- Center post is removable for easy installation of the inner panel.
Standards
- UL 508A Type 3R, 4 and 12
- CSA Type 3R, 4 and 12
- Complies with:
- NEMA Type 3R, 4, 12 and 13
- IEC 60529, IP66
Finish
- Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating.
- Optional inner panels are available in white powder coating, or unpainted galvanized steel.
Accessories
- Inner Panels
- Center Panel Supports
- Panel Rails
- Swing Out Frames
- Door Stop Kit
- Top Hat Cable Modules
- Drip Shield Kit
- Type 12/4, 4X Handle Kits
- Window Kits
- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Single Access
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D Optional
Full Panel¹HN4FS604818 60.00 48.00 18.00 60AWFW HN4FS724818 72.00 48.00 18.00 72ZWFW HN4FS726018 72.00 60.00 18.00 72ZXFW HN4FS727218 72.00 72.00 18.00 72ZYFW HN4FS904820 90.00 48.00 20.00 90BWFW HN4FS907220 90.00 72.00 20.00 90BYFW HN4FS724824 72.00 48.00 24.00 72ZWFW HN4FS726024 72.00 60.00 24.00 72ZXFW HN4FS727224 72.00 72.00 24.00 72ZYFW HN4FS907224 90.00 72.00 24.00 90BYFW HN4FS726036 72.00 60.00 36.00 72ZXFW HN4FS907236 90.00 72.00 36.00 90BYFW Dual Access
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D Optional
Full Panel¹HN4FS724824DA 72.00 48.00 24.00 72ZWFW HN4FS726024DA 72.00 60.00 24.00 72ZXFW HN4FS727224DA 72.00 72.00 24.00 72ZYFW HN4FS907224DA 90.00 72.00 24.00 90BYFW HN4FS726036DA 72.00 60.00 36.00 72ZXFW SKU: HN4FS726024DA -
Discontinued Products
Type 4X Stainless Steel Freestanding Enclosure HN4 FS SS Series – (HN4FS602418SS) (DISCONTINUED)
Discontinued ProductsType 4X Stainless Steel Freestanding Enclosure HN4 FS SS Series – (HN4FS602418SS) (DISCONTINUED)
Application
- Designed to house electrical, electronic, hydraulic or pneumatic controls with provision for panel mounting or rack mounting of equipment.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion is a serious problem.
- A variety of inner panels, rack mounting rails and swing out frames are available to provide flexibility in mounting arrangements.
Construction
- Formed 12 gauge 304 stainless steel.
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Heavy duty stainless steel lifting eyebolts are provided with reinforcing support angles.
- Doors are supported with heavy gauge continuous hinges.
- New 3-pt padlocking door handle.
- Seamless poured-in-place gasket.
- A grounding stud is provided in the enclosure and a bonding stud is provided on the door.
- Mounting channels are welded on the inside of the enclosure for mounting of optional inner panels or rack equipment rails.
Standards
- UL 508A Type 3R, 4X and 12
- CSA Type 3R, 4X and 12
- Complies with:
- NEMA Type 3R, 4X, 12 and 3
- IEC 60529, IP66
Finish
- Cover and enclosure are natural stainless steel with a smooth brushed finish.
- Optional inner panels are finished in white powder paint.
Accessories
- Inner Panels
- Panel Rails
- Swing Out Frames
- Door Stop Kit
- Drip Shield Kit
- Type 12/4, 4X Handle Kits
- Window Kits
- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Single Access
Units shown: inch. Switch units to: mm
304 S.S. 316 S.S. Enclosure Optional Full Size Part No. Part No. H W D Panel HN4FS602418SS HN4FS602418S16 60.06 24.06 18.06 60TWFW HN4FS722418SS HN4FS722418S16 72.06 24.06 18.06 72WFW HN4FS723018SS HN4FS723018S16 72.06 30.06 18.06 72XFW HN4FS723618SS HN4FS723618S16 72.06 36.06 18.06 72YFW HN4FS902420SS HN4FS902420S16 90.06 24.06 20.06 90YWFW HN4FS903620SS HN4FS903620S16 90.06 36.06 20.06 90YFW HN4FS603624SS HN4FS603624S16 60.06 36.06 24.06 60TYFW HN4FS722424SS HN4FS722424S16 72.06 24.06 24.06 72WFW HN4FS723024SS HN4FS723024S16 72.06 30.06 24.06 72XFW HN4FS723624SS HN4FS723624S16 72.06 36.06 24.06 72YFW HN4FS903624SS HN4FS903624S16 90.06 36.06 24.06 90YFW HN4FS723630SS HN4FS723630S16 72.06 36.06 30.06 72YFW HN4FS723636SS HN4FS723636S16 72.06 36.06 36.06 72YFW HN4FS903636SS HN4FS903636S16 90.06 36.06 36.06 90YFW Dual Access
Units shown: inch. Switch units to: mm