American Tech Supply Full Catalog
Showing 1057–1080 of 75476 results
-
Discontinued Products
Type 12 Mild Steel Two Door Freestanding Enclosure 1418 FS Series – (1418ZYD24) (DISCONTINUED)
Discontinued ProductsType 12 Mild Steel Two Door Freestanding Enclosure 1418 FS Series – (1418ZYD24) (DISCONTINUED)
Application
- Designed to house electrical, electronic, hydraulic or pneumatic controls with provision for panel mounting or rack mounting of equipment.
- Provides a degree of protection from falling dirt, dust, oil and water.
- Available with front access only or both front and rear access.
- A variety of inner panels, rack mounting angles and swing frames are available to provide flexibility in equipment mounting.
Standards
- UL 508A Type 12
- CSA Type 12
- Complies with
- NEMA Type 12
- IEC 60529, IP54
Construction
- Formed 12 gauge steel (10 gauge on back of single access enclosures).
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Stiffeners on the rear of the enclosure provide rigidity. (Single access)
- Lifting eyes provide for easy enclosure handling.
- Doors are supported with heavy gauge continuous hinges.
- Doors are secured with a three point latch and operated with a key locking automotive type handle.
- Latch rods are equipped with rollers for easier door closing.
- Oil resistant gaskets are permanently secured.
- Provision for light kit mounting.
- Mounting channels are welded on the inside of the enclosure for mounting of optional inner panels or rack equipment rails.
- A bonding stud is provided on the door and a grounding stud is provided in the enclosure for each door.
- A literature pocket is provided for the inside of the door (Two pockets are provided for dual access units).
Finish
- Cover and enclosure are phosphatized and finished in recoatable smooth ANSI 61 gray powder coating.
- Optional inner panels, rails, frames and supports are available in white powder coating.
Accessories
- Inner Panels
- Center Panel Supports
- Panel Rails
- Swing Out Frames
- Door Stop Kit
- Top Hat Cable Modules
- Climate Control
- Window Kits
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Single Access
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D Optional
Full Panel¹1418AW18 60.06 48.06 18.06 60AWFW 1418ZW18 72.06 48.06 18.06 72ZWFW 1418ZX18 72.06 60.06 18.06 72ZXFW 1418ZY18 72.06 72.06 18.06 72ZYFW 1418BW20 90.06 48.06 20.06 90BWFW 1418BY20 90.06 72.06 20.06 90BYFW 1418BY24 90.06 72.06 24.06 90BYFW 1418ZW24 72.06 48.06 24.06 72ZWFW 1418ZX24 72.06 60.06 24.06 72ZXFW 1418ZY24 72.06 72.06 24.06 72ZYFW 1418ZX36 72.06 60.06 36.06 72ZXFW 1418BY36 90.06 72.06 36.06 90BYFW SKU: 1418ZYD24 -
Rack Mounting Solutions, Server Racks and Cabinets, Assembled, Hammond
Colocation/ Multi-Bay Server Rack Cabinet CLC Series – (CLC4B42BK)
Rack Mounting Solutions, Server Racks and Cabinets, Assembled, HammondColocation/ Multi-Bay Server Rack Cabinet CLC Series – (CLC4B42BK)
The co-location rack cabinet system from Hammond features four (4) different bay configurations and several roof options. Whether you are leasing the space or want to restrict access to sections of your cabinet, the Hammond CLC Series is loaded with innovative features.
Features
- Available in 44U mounting height.
- Available in 36”, 42” and 48″ depths.
- One single frame allows multiple bay configurations.
- Compatible with containment system and cable-trough accessories.
- Flush-mounted doors with locking swing handle.
- Side cable pass-thru knockouts.
- Optional solid side panels.
- One (1) interchangeable top panel.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- Square hole 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Where applicable, the divider shelves are constructed of reinforced 16-gauge steel.
- The shelves are designed to support the most robust of equipment such as tower servers.
- UL Listed 2416 load rated for up to 3,000 lbs (1,360 kg). Static Load tested to 12,000 lbs (5,443 kg).
- Grounding studs bonded to frame, side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
PCI DSS Compliance
The CLC series is PCI-Compliant when:
- Multiple cabinets are connected together and/or the open side is closed in using the appropriate side panel (listed in the accessory table below).
- The cable manager security plates CLCCMSP are installed.
- The cable manager security covers CLCCMSC are installed.
Included Components
- Welded steel frame with factory-installed nylon levelling feet, ground studs, and mounting points for optional casters.
- Two (2) pairs (Per bay) of adjustable depth EIA compliant square hole punched mounting rails.
- One (1) removable side panel (with 1/4 turn latches). An additional side panel is sold separately.
- Two (2) (Per bay) perforated front door (65% open area vented) with locking swing handle.
-
Vented bay divider shelf with rear removable panels for vertical PDU installation.
Note: Cabinet TOP panels are NOT included and are sold separately. (See table below)
Gallery
Accessories
SKU: CLC4B42BK -
Discontinued Products
Type 4 Mild Steel Two Door Floormount Enclosure HN4 FM Series – (HN4FM606018) (DISCONTINUED)
Discontinued ProductsType 4 Mild Steel Two Door Floormount Enclosure HN4 FM Series – (HN4FM606018) (DISCONTINUED)
Application
- Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in outdoor applications for full weather protection.
Construction
- Enclosures are formed steel – 12 gauge (60″ high) or combination 10/12 gauge (72″ high).
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Lifting eyes provide for easy enclosure handling.
- Doors are supported with heavy gauge continuous hinges.
- 3-pt padlocking door handle.
- Seamless poured-in place gasket.
- Provision for light kit mounting.
- A grounding stud is provided in the enclosure and a bonding stud is provided on the door.
- Center post is removable for easy installation of the inner panel.
- 12″ floor stands are welded to the enclosure.
- Body stiffeners are provided in the larger enclosures for extra rigidity.
- Formed lip on door and top of enclosure opening exclude flowing liquids and contaminants.
- A removable 10 gauge inner panel is included.
- Panel supports are provided for easy panel installation.
- Collar studs are provided for mounting inner panels.
- A literature pocket is provided for the inside of the door.
Standards
- UL 508A Type 3R, 4 and 12
- CSA Type 3R, 4 and 12
- Complies with:
- NEMA Type 3R, 4, 12 and 3
- IEC 60529, IP66
Finish
- Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating.
- Removable white inner panel is finished in white powder coating.
Accessories
- Additional Inner Panels
- Door Stop Kit
- Barrier Kits for Type 4 Floormount
- Mechanical Interlock
- Drip Shield Kit
- Top Hat Cable Modules
- Enclosure Stabilizers
- Window Kits
- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Inner Panel Part No. H W D H W HN4FM604810 60.13 48.06 10.69 56.00 44.00 HN4FM604818 60.13 48.06 18.69 56.00 44.00 HN4FM606012 60.13 60.06 12.69 56.00 56.00 HN4FM606018 60.13 60.06 18.69 56.00 56.00 HN4FM726012 72.13 60.06 12.69 68.00 56.00 HN4FM726018 72.13 60.06 18.69 68.00 56.00 HN4FM727212 72.13 72.06 12.69 68.00 68.00 HN4FM727218 72.13 72.06 18.69 68.00 68.00 HN4FM727224 72.13 72.06 24.69 68.00 68.00 SKU: HN4FM606018 -
Power Solutions, UPS, UPS, Data Cabinets and Racks, Power Solutions, Great Lakes
UPS Solutions Online: Lead Acid – 2000V Power Capcity / 120V /2 Post Mounting / 1 SNMP Card / 1 Bypass Module / 1 External Battery – Great Lakes Data Racks and Cabinets
Power Solutions, UPS, UPS, Data Cabinets and Racks, Power Solutions, Great LakesUPS Solutions Online: Lead Acid – 2000V Power Capcity / 120V /2 Post Mounting / 1 SNMP Card / 1 Bypass Module / 1 External Battery – Great Lakes Data Racks and Cabinets
Suggested pricing, call for discounts
SKU: GLUPS-ONLA-200A-120-1BP-1M-1BY-2P -
Discontinued Products
Type 4X Stainless Steel Wallmount Enclosure 1418 N4 SS Series – (1418N4S16T12) (DISCONTINUED)
Discontinued ProductsType 4X Stainless Steel Wallmount Enclosure 1418 N4 SS Series – (1418N4S16T12) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion is a serious problem.
Standards
- UL 508A Type 3R, 4, 4X, and 12
- CSA Type 3R, 4, 4X, and 12
- Complies with
- NEMA Type 3R, 4, 4X, 12 and 13
- IEC 60529, IP66
Construction
- Formed 14 gauge 304 or 316 stainless steel.
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Door stiffeners are provided in the larger enclosures for extra rigidity.
- Welded brackets provide for enclosure mounting.
- Formed lip on door and enclosure excludes flowing liquids and contaminants.
- Stainless steel continuous hinge on door may be removed by pulling the stainless steel hinge pin.
- Door is secured with easily operated stainless steel clamps.
- Provision for padlocking.
- Seamless poured-in place gasket.
- A removable 12 gauge inner panel is included.
- Collar studs are provided for mounting inner panels.
- A bonding stud is provided on the door and a grounding stud is provided in the enclosure.
- A literature pocket is provided for the inside of the door.
Finish
- Cover and enclosure are natural stainless steel with a smooth brushed finish.
- Removable inner panel is finished in white powder coating.
Accessories
- Additional Inner Panels
- Perforated Inner Panels
- Swing Panel Kit
- Door Stop Kit
- Door Clamping Hardware
- Wallmount Quick Release Clamp
- Drip Shield Kit
- Floor Stand Kit
- Window Kits
- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm