Shop By Brand
American Tech Supply Full Catalog
Showing 115393–115416 of 115970 results
-
Discontinued Products
(Discontinued) Compact LED Light Kit LEDLK Series – (LEDDCCORDCON)
Our compact LED light kit provides efficient lighting solution for most enclosure applications without taking up valuable interior space. Available in magnet or screw mounting and AC or DC power options.
Features
- Housing constructed in transparent plastic.
- Screw or magnet mounting.
- Available with rocker switch or motion sensor.
- Easily connect up to ten (10) light kits together in a daisy chain using LEDXXCORDCON cords.
- Connection: 2-pole plug with snap lock; AC: max. 2.5 A / AC 240 V, white connector; DC: max. 2.5 A / DC 60 V, blue connector.
- Requires hard-wired connection using LEDXXCORDPOWR power cord with leads and plug or power brick (not included).
Specifications
- LED provide 400 Lm at 120° (1,200 Lm at 360° or equivalent 95W light bulb).
- LED temperature 6,000 to 7,000 K.
- Operating / Storage temperature: -22 to +140 °F (-30 to +60 °C) / -40 to +185 °F (-40 to +85 °C).
- Operating / Storage humidity: max. 90 %RH (non-condensing).
- Service life: 60,000 hrs. at 68 °F (20 °C).
- Max. 5 W power consumption (~ 75 W incandescent bulb)
- Protection class / Protection type: II (double insulated) / IP20
Note that the cord on this product is intended to be hard-wired. There are currently no standard plug types for this product.
Gallery
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
LED Light Kits
Part No. Voltage On/Off Mount LEDACSWMAG 90-260V AC Switch Magnet LEDACMSMAG 90-260V AC Sensor Magnet LEDACSWSCR 90-260V AC Switch Screw LEDACMSSCR 90-260V AC Sensor Screw LEDDCSWMAG 20-60V DC Switch Magnet LEDDCMSMAG 20-60V DC Sensor Magnet LEDDCSWSCR 20-60V DC Switch Screw LEDDCMSSCR 20-60V DC Sensor Screw LED Light Kit Cords
Units shown: inch. Switch units to: mm
Part No. Type Source Length LEDACCORDPOW Power Cord w/leads AC 78.75 LEDDCCORDPOW Power Cord w/leads DC 78.75 LEDACCORDCON Connector/Daisy Chain Cord AC 39.38 LEDDCCORDCON Connector/Daisy Chain Cord DC 39.38 Light Channel Hardware
Part No. Description LCMTG1032 Light channel mounting hardware – 4 x spring nuts/10-32 screws SKU: LEDDCCORDCON -
Discontinued Products
(Discontinued) Compact LED Light Kit LEDLK Series – (LEDACCORDCON)
Our compact LED light kit provides efficient lighting solution for most enclosure applications without taking up valuable interior space. Available in magnet or screw mounting and AC or DC power options.
Features
- Housing constructed in transparent plastic.
- Screw or magnet mounting.
- Available with rocker switch or motion sensor.
- Easily connect up to ten (10) light kits together in a daisy chain using LEDXXCORDCON cords.
- Connection: 2-pole plug with snap lock; AC: max. 2.5 A / AC 240 V, white connector; DC: max. 2.5 A / DC 60 V, blue connector.
- Requires hard-wired connection using LEDXXCORDPOWR power cord with leads and plug or power brick (not included).
Specifications
- LED provide 400 Lm at 120° (1,200 Lm at 360° or equivalent 95W light bulb).
- LED temperature 6,000 to 7,000 K.
- Operating / Storage temperature: -22 to +140 °F (-30 to +60 °C) / -40 to +185 °F (-40 to +85 °C).
- Operating / Storage humidity: max. 90 %RH (non-condensing).
- Service life: 60,000 hrs. at 68 °F (20 °C).
- Max. 5 W power consumption (~ 75 W incandescent bulb)
- Protection class / Protection type: II (double insulated) / IP20
Note that the cord on this product is intended to be hard-wired. There are currently no standard plug types for this product.
Gallery
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
LED Light Kits
Part No. Voltage On/Off Mount LEDACSWMAG 90-260V AC Switch Magnet LEDACMSMAG 90-260V AC Sensor Magnet LEDACSWSCR 90-260V AC Switch Screw LEDACMSSCR 90-260V AC Sensor Screw LEDDCSWMAG 20-60V DC Switch Magnet LEDDCMSMAG 20-60V DC Sensor Magnet LEDDCSWSCR 20-60V DC Switch Screw LEDDCMSSCR 20-60V DC Sensor Screw LED Light Kit Cords
Units shown: inch. Switch units to: mm
Part No. Type Source Length LEDACCORDPOW Power Cord w/leads AC 78.75 LEDDCCORDPOW Power Cord w/leads DC 78.75 LEDACCORDCON Connector/Daisy Chain Cord AC 39.38 LEDDCCORDCON Connector/Daisy Chain Cord DC 39.38 Light Channel Hardware
Part No. Description LCMTG1032 Light channel mounting hardware – 4 x spring nuts/10-32 screws SKU: LEDACCORDCON -
Discontinued Products
(Discontinued) Compact LED Light Kit LEDLK Series – (LEDDCCORDPOW)
Our compact LED light kit provides efficient lighting solution for most enclosure applications without taking up valuable interior space. Available in magnet or screw mounting and AC or DC power options.
Features
- Housing constructed in transparent plastic.
- Screw or magnet mounting.
- Available with rocker switch or motion sensor.
- Easily connect up to ten (10) light kits together in a daisy chain using LEDXXCORDCON cords.
- Connection: 2-pole plug with snap lock; AC: max. 2.5 A / AC 240 V, white connector; DC: max. 2.5 A / DC 60 V, blue connector.
- Requires hard-wired connection using LEDXXCORDPOWR power cord with leads and plug or power brick (not included).
Specifications
- LED provide 400 Lm at 120° (1,200 Lm at 360° or equivalent 95W light bulb).
- LED temperature 6,000 to 7,000 K.
- Operating / Storage temperature: -22 to +140 °F (-30 to +60 °C) / -40 to +185 °F (-40 to +85 °C).
- Operating / Storage humidity: max. 90 %RH (non-condensing).
- Service life: 60,000 hrs. at 68 °F (20 °C).
- Max. 5 W power consumption (~ 75 W incandescent bulb)
- Protection class / Protection type: II (double insulated) / IP20
Note that the cord on this product is intended to be hard-wired. There are currently no standard plug types for this product.
Gallery
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
LED Light Kits
Part No. Voltage On/Off Mount LEDACSWMAG 90-260V AC Switch Magnet LEDACMSMAG 90-260V AC Sensor Magnet LEDACSWSCR 90-260V AC Switch Screw LEDACMSSCR 90-260V AC Sensor Screw LEDDCSWMAG 20-60V DC Switch Magnet LEDDCMSMAG 20-60V DC Sensor Magnet LEDDCSWSCR 20-60V DC Switch Screw LEDDCMSSCR 20-60V DC Sensor Screw LED Light Kit Cords
Units shown: inch. Switch units to: mm
Part No. Type Source Length LEDACCORDPOW Power Cord w/leads AC 78.75 LEDDCCORDPOW Power Cord w/leads DC 78.75 LEDACCORDCON Connector/Daisy Chain Cord AC 39.38 LEDDCCORDCON Connector/Daisy Chain Cord DC 39.38 Light Channel Hardware
Part No. Description LCMTG1032 Light channel mounting hardware – 4 x spring nuts/10-32 screws SKU: LEDDCCORDPOW -
Discontinued Products
(Discontinued) Compact LED Light Kit LEDLK Series – (LEDACCORDPOW)
Our compact LED light kit provides efficient lighting solution for most enclosure applications without taking up valuable interior space. Available in magnet or screw mounting and AC or DC power options.
Features
- Housing constructed in transparent plastic.
- Screw or magnet mounting.
- Available with rocker switch or motion sensor.
- Easily connect up to ten (10) light kits together in a daisy chain using LEDXXCORDCON cords.
- Connection: 2-pole plug with snap lock; AC: max. 2.5 A / AC 240 V, white connector; DC: max. 2.5 A / DC 60 V, blue connector.
- Requires hard-wired connection using LEDXXCORDPOWR power cord with leads and plug or power brick (not included).
Specifications
- LED provide 400 Lm at 120° (1,200 Lm at 360° or equivalent 95W light bulb).
- LED temperature 6,000 to 7,000 K.
- Operating / Storage temperature: -22 to +140 °F (-30 to +60 °C) / -40 to +185 °F (-40 to +85 °C).
- Operating / Storage humidity: max. 90 %RH (non-condensing).
- Service life: 60,000 hrs. at 68 °F (20 °C).
- Max. 5 W power consumption (~ 75 W incandescent bulb)
- Protection class / Protection type: II (double insulated) / IP20
Note that the cord on this product is intended to be hard-wired. There are currently no standard plug types for this product.
Gallery
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
LED Light Kits
Part No. Voltage On/Off Mount LEDACSWMAG 90-260V AC Switch Magnet LEDACMSMAG 90-260V AC Sensor Magnet LEDACSWSCR 90-260V AC Switch Screw LEDACMSSCR 90-260V AC Sensor Screw LEDDCSWMAG 20-60V DC Switch Magnet LEDDCMSMAG 20-60V DC Sensor Magnet LEDDCSWSCR 20-60V DC Switch Screw LEDDCMSSCR 20-60V DC Sensor Screw LED Light Kit Cords
Units shown: inch. Switch units to: mm
Part No. Type Source Length LEDACCORDPOW Power Cord w/leads AC 78.75 LEDDCCORDPOW Power Cord w/leads DC 78.75 LEDACCORDCON Connector/Daisy Chain Cord AC 39.38 LEDDCCORDCON Connector/Daisy Chain Cord DC 39.38 Light Channel Hardware
Part No. Description LCMTG1032 Light channel mounting hardware – 4 x spring nuts/10-32 screws SKU: LEDACCORDPOW -
Discontinued Products
(Discontinued) Hole Plugs HPN4SS Series – (HP200SSN4)
Features
- Designed to seal unused pushbutton holes, conduit openings and knockout holes against dust, oil and water.
- Standard Pushbutton size is 30.5mm
- Available in 8 sizes.
- Finished in brushed natural 304 stainless steel.
- Oil resistant gasket.
- Secured with an 10-24 x 0.55″ threaded stud and stainless steel wing nut.
- Recognized component UR & cUR
- Type 1, 3, 3R, 4, 4X, 12 and 13
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Max Hole Plug Part No. Description Diameter Diameter HP22SSN4 22mm Pushbutton 0.88 1.22 HP50SSN4 .5″ Conduit 0.88 1.38 HP75SSN4 .75″ Conduit 1.06 1.56 HPBSSN4 30mm Pushbutton 1.25 1.75 HP100SSN4 1″ Conduit 1.38 1.88 HP125SSN4 1.25″ Conduit 1.69 2.19 HP150SSN4 1.5″ Conduit 2.00 2.50 HP200SSN4 2″ Conduit 2.50 3.00 SKU: HP200SSN4 -
Discontinued Products
(Discontinued) Hole Plugs HPN4SS Series – (HP150SSN4)
Features
- Designed to seal unused pushbutton holes, conduit openings and knockout holes against dust, oil and water.
- Standard Pushbutton size is 30.5mm
- Available in 8 sizes.
- Finished in brushed natural 304 stainless steel.
- Oil resistant gasket.
- Secured with an 10-24 x 0.55″ threaded stud and stainless steel wing nut.
- Recognized component UR & cUR
- Type 1, 3, 3R, 4, 4X, 12 and 13
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Max Hole Plug Part No. Description Diameter Diameter HP22SSN4 22mm Pushbutton 0.88 1.22 HP50SSN4 .5″ Conduit 0.88 1.38 HP75SSN4 .75″ Conduit 1.06 1.56 HPBSSN4 30mm Pushbutton 1.25 1.75 HP100SSN4 1″ Conduit 1.38 1.88 HP125SSN4 1.25″ Conduit 1.69 2.19 HP150SSN4 1.5″ Conduit 2.00 2.50 HP200SSN4 2″ Conduit 2.50 3.00 SKU: HP150SSN4 -
Discontinued Products
(Discontinued) Hole Plugs HPN4SS Series – (HP125SSN4)
Features
- Designed to seal unused pushbutton holes, conduit openings and knockout holes against dust, oil and water.
- Standard Pushbutton size is 30.5mm
- Available in 8 sizes.
- Finished in brushed natural 304 stainless steel.
- Oil resistant gasket.
- Secured with an 10-24 x 0.55″ threaded stud and stainless steel wing nut.
- Recognized component UR & cUR
- Type 1, 3, 3R, 4, 4X, 12 and 13
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Max Hole Plug Part No. Description Diameter Diameter HP22SSN4 22mm Pushbutton 0.88 1.22 HP50SSN4 .5″ Conduit 0.88 1.38 HP75SSN4 .75″ Conduit 1.06 1.56 HPBSSN4 30mm Pushbutton 1.25 1.75 HP100SSN4 1″ Conduit 1.38 1.88 HP125SSN4 1.25″ Conduit 1.69 2.19 HP150SSN4 1.5″ Conduit 2.00 2.50 HP200SSN4 2″ Conduit 2.50 3.00 SKU: HP125SSN4 -
Discontinued Products
(Discontinued) Hole Plugs HPN4SS Series – (HP100SSN4)
Features
- Designed to seal unused pushbutton holes, conduit openings and knockout holes against dust, oil and water.
- Standard Pushbutton size is 30.5mm
- Available in 8 sizes.
- Finished in brushed natural 304 stainless steel.
- Oil resistant gasket.
- Secured with an 10-24 x 0.55″ threaded stud and stainless steel wing nut.
- Recognized component UR & cUR
- Type 1, 3, 3R, 4, 4X, 12 and 13
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Max Hole Plug Part No. Description Diameter Diameter HP22SSN4 22mm Pushbutton 0.88 1.22 HP50SSN4 .5″ Conduit 0.88 1.38 HP75SSN4 .75″ Conduit 1.06 1.56 HPBSSN4 30mm Pushbutton 1.25 1.75 HP100SSN4 1″ Conduit 1.38 1.88 HP125SSN4 1.25″ Conduit 1.69 2.19 HP150SSN4 1.5″ Conduit 2.00 2.50 HP200SSN4 2″ Conduit 2.50 3.00 SKU: HP100SSN4 -
Discontinued Products
(Discontinued) Hole Plugs HPN4SS Series – (HPBSSN4)
Features
- Designed to seal unused pushbutton holes, conduit openings and knockout holes against dust, oil and water.
- Standard Pushbutton size is 30.5mm
- Available in 8 sizes.
- Finished in brushed natural 304 stainless steel.
- Oil resistant gasket.
- Secured with an 10-24 x 0.55″ threaded stud and stainless steel wing nut.
- Recognized component UR & cUR
- Type 1, 3, 3R, 4, 4X, 12 and 13
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Max Hole Plug Part No. Description Diameter Diameter HP22SSN4 22mm Pushbutton 0.88 1.22 HP50SSN4 .5″ Conduit 0.88 1.38 HP75SSN4 .75″ Conduit 1.06 1.56 HPBSSN4 30mm Pushbutton 1.25 1.75 HP100SSN4 1″ Conduit 1.38 1.88 HP125SSN4 1.25″ Conduit 1.69 2.19 HP150SSN4 1.5″ Conduit 2.00 2.50 HP200SSN4 2″ Conduit 2.50 3.00 SKU: HPBSSN4 -
Discontinued Products
(Discontinued) Hole Plugs HPN4SS Series – (HP75SSN4)
Features
- Designed to seal unused pushbutton holes, conduit openings and knockout holes against dust, oil and water.
- Standard Pushbutton size is 30.5mm
- Available in 8 sizes.
- Finished in brushed natural 304 stainless steel.
- Oil resistant gasket.
- Secured with an 10-24 x 0.55″ threaded stud and stainless steel wing nut.
- Recognized component UR & cUR
- Type 1, 3, 3R, 4, 4X, 12 and 13
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Max Hole Plug Part No. Description Diameter Diameter HP22SSN4 22mm Pushbutton 0.88 1.22 HP50SSN4 .5″ Conduit 0.88 1.38 HP75SSN4 .75″ Conduit 1.06 1.56 HPBSSN4 30mm Pushbutton 1.25 1.75 HP100SSN4 1″ Conduit 1.38 1.88 HP125SSN4 1.25″ Conduit 1.69 2.19 HP150SSN4 1.5″ Conduit 2.00 2.50 HP200SSN4 2″ Conduit 2.50 3.00 SKU: HP75SSN4 -
Discontinued Products
(Discontinued) Hole Plugs HPN4SS Series – (HP50SSN4)
Features
- Designed to seal unused pushbutton holes, conduit openings and knockout holes against dust, oil and water.
- Standard Pushbutton size is 30.5mm
- Available in 8 sizes.
- Finished in brushed natural 304 stainless steel.
- Oil resistant gasket.
- Secured with an 10-24 x 0.55″ threaded stud and stainless steel wing nut.
- Recognized component UR & cUR
- Type 1, 3, 3R, 4, 4X, 12 and 13
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Max Hole Plug Part No. Description Diameter Diameter HP22SSN4 22mm Pushbutton 0.88 1.22 HP50SSN4 .5″ Conduit 0.88 1.38 HP75SSN4 .75″ Conduit 1.06 1.56 HPBSSN4 30mm Pushbutton 1.25 1.75 HP100SSN4 1″ Conduit 1.38 1.88 HP125SSN4 1.25″ Conduit 1.69 2.19 HP150SSN4 1.5″ Conduit 2.00 2.50 HP200SSN4 2″ Conduit 2.50 3.00 SKU: HP50SSN4 -
Discontinued Products
(Discontinued) Hole Plugs HPN4SS Series – (HP22SSN4)
Features
- Designed to seal unused pushbutton holes, conduit openings and knockout holes against dust, oil and water.
- Standard Pushbutton size is 30.5mm
- Available in 8 sizes.
- Finished in brushed natural 304 stainless steel.
- Oil resistant gasket.
- Secured with an 10-24 x 0.55″ threaded stud and stainless steel wing nut.
- Recognized component UR & cUR
- Type 1, 3, 3R, 4, 4X, 12 and 13
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Max Hole Plug Part No. Description Diameter Diameter HP22SSN4 22mm Pushbutton 0.88 1.22 HP50SSN4 .5″ Conduit 0.88 1.38 HP75SSN4 .75″ Conduit 1.06 1.56 HPBSSN4 30mm Pushbutton 1.25 1.75 HP100SSN4 1″ Conduit 1.38 1.88 HP125SSN4 1.25″ Conduit 1.69 2.19 HP150SSN4 1.5″ Conduit 2.00 2.50 HP200SSN4 2″ Conduit 2.50 3.00 SKU: HP22SSN4 -
Discontinued Products
(Discontinued) Hole Plugs HPN4PC Series – (HP400PCGY)
Features
- Designed to seal unused pushbutton holes, conduit openings and knockout holes against dust, oil and water.
- Standard Pushbutton size is 30.5mm
- Available in 11 sizes.
- Available in 2 color options – ANSI 61 Gray (GY) & RAL7035 Light Gray (LG)
- Compatible with enclosure wall thickness from 16 gauge to 1/4”
- Self centering, anti-rotational design for fast and easy one person installation, no tools required
- Recognized component for use with UL & CSA listed enclosures
- Type 1, 3, 3R, 4, 4X
-
Molded in polycarbonate with neoprene/EPDM gasket material
SKU: HP400PCGY -
Discontinued Products
(Discontinued) Hole Plugs HPN4PC Series – (HP350PCGY)
Features
- Designed to seal unused pushbutton holes, conduit openings and knockout holes against dust, oil and water.
- Standard Pushbutton size is 30.5mm
- Available in 11 sizes.
- Available in 2 color options – ANSI 61 Gray (GY) & RAL7035 Light Gray (LG)
- Compatible with enclosure wall thickness from 16 gauge to 1/4”
- Self centering, anti-rotational design for fast and easy one person installation, no tools required
- Recognized component for use with UL & CSA listed enclosures
- Type 1, 3, 3R, 4, 4X
-
Molded in polycarbonate with neoprene/EPDM gasket material
SKU: HP350PCGY -
Discontinued Products
(Discontinued) Hole Plugs HPN4PC Series – (HP300PCGY)
Features
- Designed to seal unused pushbutton holes, conduit openings and knockout holes against dust, oil and water.
- Standard Pushbutton size is 30.5mm
- Available in 11 sizes.
- Available in 2 color options – ANSI 61 Gray (GY) & RAL7035 Light Gray (LG)
- Compatible with enclosure wall thickness from 16 gauge to 1/4”
- Self centering, anti-rotational design for fast and easy one person installation, no tools required
- Recognized component for use with UL & CSA listed enclosures
- Type 1, 3, 3R, 4, 4X
-
Molded in polycarbonate with neoprene/EPDM gasket material
SKU: HP300PCGY -
Discontinued Products
(Discontinued) Hole Plugs HPN4PC Series – (HP250PCGY)
Features
- Designed to seal unused pushbutton holes, conduit openings and knockout holes against dust, oil and water.
- Standard Pushbutton size is 30.5mm
- Available in 11 sizes.
- Available in 2 color options – ANSI 61 Gray (GY) & RAL7035 Light Gray (LG)
- Compatible with enclosure wall thickness from 16 gauge to 1/4”
- Self centering, anti-rotational design for fast and easy one person installation, no tools required
- Recognized component for use with UL & CSA listed enclosures
- Type 1, 3, 3R, 4, 4X
-
Molded in polycarbonate with neoprene/EPDM gasket material
SKU: HP250PCGY -
Discontinued Products
(Discontinued) Hole Plugs HPN4PC Series – (HP200PCGY)
Features
- Designed to seal unused pushbutton holes, conduit openings and knockout holes against dust, oil and water.
- Standard Pushbutton size is 30.5mm
- Available in 11 sizes.
- Available in 2 color options – ANSI 61 Gray (GY) & RAL7035 Light Gray (LG)
- Compatible with enclosure wall thickness from 16 gauge to 1/4”
- Self centering, anti-rotational design for fast and easy one person installation, no tools required
- Recognized component for use with UL & CSA listed enclosures
- Type 1, 3, 3R, 4, 4X
-
Molded in polycarbonate with neoprene/EPDM gasket material
SKU: HP200PCGY -
Discontinued Products
(Discontinued) Hole Plugs HPN4PC Series – (HP150PCGY)
Features
- Designed to seal unused pushbutton holes, conduit openings and knockout holes against dust, oil and water.
- Standard Pushbutton size is 30.5mm
- Available in 11 sizes.
- Available in 2 color options – ANSI 61 Gray (GY) & RAL7035 Light Gray (LG)
- Compatible with enclosure wall thickness from 16 gauge to 1/4”
- Self centering, anti-rotational design for fast and easy one person installation, no tools required
- Recognized component for use with UL & CSA listed enclosures
- Type 1, 3, 3R, 4, 4X
-
Molded in polycarbonate with neoprene/EPDM gasket material
SKU: HP150PCGY -
Discontinued Products
(Discontinued) Hole Plugs HPN4PC Series – (HP125PCGY)
Features
- Designed to seal unused pushbutton holes, conduit openings and knockout holes against dust, oil and water.
- Standard Pushbutton size is 30.5mm
- Available in 11 sizes.
- Available in 2 color options – ANSI 61 Gray (GY) & RAL7035 Light Gray (LG)
- Compatible with enclosure wall thickness from 16 gauge to 1/4”
- Self centering, anti-rotational design for fast and easy one person installation, no tools required
- Recognized component for use with UL & CSA listed enclosures
- Type 1, 3, 3R, 4, 4X
-
Molded in polycarbonate with neoprene/EPDM gasket material
SKU: HP125PCGY -
Discontinued Products
(Discontinued) Hole Plugs HPN4PC Series – (HP100PCGY)
Features
- Designed to seal unused pushbutton holes, conduit openings and knockout holes against dust, oil and water.
- Standard Pushbutton size is 30.5mm
- Available in 11 sizes.
- Available in 2 color options – ANSI 61 Gray (GY) & RAL7035 Light Gray (LG)
- Compatible with enclosure wall thickness from 16 gauge to 1/4”
- Self centering, anti-rotational design for fast and easy one person installation, no tools required
- Recognized component for use with UL & CSA listed enclosures
- Type 1, 3, 3R, 4, 4X
-
Molded in polycarbonate with neoprene/EPDM gasket material
SKU: HP100PCGY -
Discontinued Products
(Discontinued) Hole Plugs HPN4PC Series – (HP75PCGY)
Features
- Designed to seal unused pushbutton holes, conduit openings and knockout holes against dust, oil and water.
- Standard Pushbutton size is 30.5mm
- Available in 11 sizes.
- Available in 2 color options – ANSI 61 Gray (GY) & RAL7035 Light Gray (LG)
- Compatible with enclosure wall thickness from 16 gauge to 1/4”
- Self centering, anti-rotational design for fast and easy one person installation, no tools required
- Recognized component for use with UL & CSA listed enclosures
- Type 1, 3, 3R, 4, 4X
-
Molded in polycarbonate with neoprene/EPDM gasket material
SKU: HP75PCGY -
Discontinued Products
(Discontinued) Hole Plugs HPN4PC Series – (HP50PCGY)
Features
- Designed to seal unused pushbutton holes, conduit openings and knockout holes against dust, oil and water.
- Standard Pushbutton size is 30.5mm
- Available in 11 sizes.
- Available in 2 color options – ANSI 61 Gray (GY) & RAL7035 Light Gray (LG)
- Compatible with enclosure wall thickness from 16 gauge to 1/4”
- Self centering, anti-rotational design for fast and easy one person installation, no tools required
- Recognized component for use with UL & CSA listed enclosures
- Type 1, 3, 3R, 4, 4X
-
Molded in polycarbonate with neoprene/EPDM gasket material
SKU: HP50PCGY -
Discontinued Products
(Discontinued) Hole Plugs HPN4PC Series – (HP12PCGY)
Features
- Designed to seal unused pushbutton holes, conduit openings and knockout holes against dust, oil and water.
- Standard Pushbutton size is 30.5mm
- Available in 11 sizes.
- Available in 2 color options – ANSI 61 Gray (GY) & RAL7035 Light Gray (LG)
- Compatible with enclosure wall thickness from 16 gauge to 1/4”
- Self centering, anti-rotational design for fast and easy one person installation, no tools required
- Recognized component for use with UL & CSA listed enclosures
- Type 1, 3, 3R, 4, 4X
-
Molded in polycarbonate with neoprene/EPDM gasket material
SKU: HP12PCGY -
Discontinued Products
(Discontinued) Hole Plugs HPN4PC Series – (HP400PCLG)
Features
- Designed to seal unused pushbutton holes, conduit openings and knockout holes against dust, oil and water.
- Standard Pushbutton size is 30.5mm
- Available in 11 sizes.
- Available in 2 color options – ANSI 61 Gray (GY) & RAL7035 Light Gray (LG)
- Compatible with enclosure wall thickness from 16 gauge to 1/4”
- Self centering, anti-rotational design for fast and easy one person installation, no tools required
- Recognized component for use with UL & CSA listed enclosures
- Type 1, 3, 3R, 4, 4X
-
Molded in polycarbonate with neoprene/EPDM gasket material
SKU: HP400PCLG
