American Tech Supply Full Catalog
Showing 1561–1584 of 75476 results
-
Discontinued Products
2000-3000 BTU/H Outdoor Air Conditioner DTS Series – (DTS3081A230N4SS) (DISCONTINUED)
Discontinued Products2000-3000 BTU/H Outdoor Air Conditioner DTS Series – (DTS3081A230N4SS) (DISCONTINUED)
Description
- Compact design for side mounting on any enclosure surface where spot cooling or low capacity cooling is required.
- Closed loop cooling ensures clean enclosure air is recirculated without ever mixing with contaminated ambient air.
- Ideal for outdoor or very wet conditions.
Standards
- UL, cUL, and CE
- Complies with
- IP56
- NEMA 3R, 4, 4X
Features
- Stainless steel body.
- R134a refrigerant.
- Thermostat control.
- Line cord with plug (115 V).
- Expansion valve permits increased efficiency through improved evaporator heat transfer and less frequent compressor operation.
- Continuous air circulation from high capacity fans.
- EMI/RFI suppression meets CE standard.
- Gasket, mounting kit, and template for cutout and drilling are included.
- Direct condensate discharge, drain hose and clamp 1/2″ barb connection.
Accessories
SKU: DTS3081A230N4SS -
Power Solutions, UPS, UPS, Data Cabinets and Racks, Power Solutions, Great Lakes
UPS Solutions Line Interactive Lead Acid – 3000VA – C19+C13 Power Capcity / 120V /2 Post Mounting / 1 SNMP Card / 1 Bypass Module – Great Lakes Data Racks and Cabinets
Power Solutions, UPS, UPS, Data Cabinets and Racks, Power Solutions, Great LakesUPS Solutions Line Interactive Lead Acid – 3000VA – C19+C13 Power Capcity / 120V /2 Post Mounting / 1 SNMP Card / 1 Bypass Module – Great Lakes Data Racks and Cabinets
Suggested pricing, call for discounts
SKU: GLUPS-LILA-300B-120-0BP-1M-1BY-2P -
Power Solutions, UPS, UPS, Data Cabinets and Racks, Power Solutions, Great Lakes
UPS Solutions Line Interactive Lead Acid – 2000VA Power Capcity / 120V /4 Post Mounting / 1 Bypass Module / 1 External Barry Pack – Great Lakes Data Racks and Cabinets
Power Solutions, UPS, UPS, Data Cabinets and Racks, Power Solutions, Great LakesUPS Solutions Line Interactive Lead Acid – 2000VA Power Capcity / 120V /4 Post Mounting / 1 Bypass Module / 1 External Barry Pack – Great Lakes Data Racks and Cabinets
Suggested pricing, call for discounts
SKU: GLUPS-LILA-200A-120-1BP-0M-1BY-4P -
Power Solutions, UPS, UPS, Data Cabinets and Racks, Power Solutions, Great Lakes
UPS Solutions Line Interactive Lead Acid – 1500VA Power Capcity / 120V /4 Post Mounting / 1 Bypass Module / 1 External Barry Pack – Great Lakes Data Racks and Cabinets
Power Solutions, UPS, UPS, Data Cabinets and Racks, Power Solutions, Great LakesUPS Solutions Line Interactive Lead Acid – 1500VA Power Capcity / 120V /4 Post Mounting / 1 Bypass Module / 1 External Barry Pack – Great Lakes Data Racks and Cabinets
Suggested pricing, call for discounts
SKU: GLUPS-LILA-150A-120-1BP-0M-1BY-4P -
UPS, Power Solutions, UPS, Data Cabinets and Racks, Power Solutions, Great Lakes
UPS Solutions Online: Lead Acid – 1500V Power Capcity / 240V /4 Post Mounting / 1 SNMP Card / 1 External Battery – Great Lakes Data Racks and Cabinets
UPS, Power Solutions, UPS, Data Cabinets and Racks, Power Solutions, Great LakesUPS Solutions Online: Lead Acid – 1500V Power Capcity / 240V /4 Post Mounting / 1 SNMP Card / 1 External Battery – Great Lakes Data Racks and Cabinets
Suggested pricing, call for discounts
SKU: GLUPS-ONLA-150A-240-1BP-1M-0BY-4P -
Rack Mounting Solutions, Server Racks and Cabinets, Assembled, Hammond
Data Center Server Cabinet H1 Series – (H13052U48WH)
Rack Mounting Solutions, Server Racks and Cabinets, Assembled, HammondData Center Server Cabinet H1 Series – (H13052U48WH)
The H1 series is designed to be your most complete offering for Server, Network, and Data Storage applications. This series incorporates Hammond Manufacturing’s practical open-design and manufacturing principles with legendary service, support, and reliability. H1 cabinets feature an array of enhancements over traditional cabinets, with cooling performance and enhanced security features demanded by today’s IT manager.
Features
- Available in 42U, 45U, 48U, and 52U mounting heights.
- 24” Width Frame Features:
- Generous cabling space
- The cabinet top includes four (4) 3.5” wide cable entry holes.
- 30” & 31.5″ Width Frame Features:
- Mounting rails in 30″ and 31.5″ wide frames include “Bonus” 1U space for optional rack accessories, such as cable management or power bars.
- The cabinet top includes four (4) 3.5” wide cable entry holes.
- Support for vertical cable managers without obstructing mounting rails.
- Available in 42″ and 48″ overall depths.
- Two (2) large 4″ x 7″ knockouts (per side) for cable pass-through.
- Side panels are sold separately.
- 42U and 45U are full-height panels.
- 48U and 52U are split height panels.
- 48″ depth cabinet includes:
- Two (2) large 4″ x 7″ knockouts for cable entry knockouts at the front/top.
- C-channel struts provide cabinet strength, ease, and flexibility to adjust mounting rails.
- Surface-mounted doors allow for full mounting depth utilization and include a locking swing handle.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and optional side panels constructed in 16-gauge steel.
- Square hole 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are powder coat finished.
- UL Listed 2416 load rated for up to 3,000 lbs (1,360 kg). Rolling caster load rated for up to 2,200 lbs (998 kg) and Static Load tested to 12,000 lbs (5,443 kg).
- Grounding studs bonded to the frame, side panels, and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black or RAL9003 white powder paint.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Included Components
- Welded steel frame with factory-installed nylon leveling feet, recessed casters, and grounding studs.
- Two (2) pairs of adjustable depth EIA-compliant square hole punched mounting rails.
- Starter pack of CAGKIT1032-50 screws and cage nuts.
-
One (1) perforated front door (79% open area vented) with locking swing handle.
-
One (1) perforated split/barn rear door (79% open area vented) with locking swing handle.
- One (1) solid and one (1) brushed cable entry top panels are interchangeable.
- One (1) PDU cable tray is mounted in the rear.
Note: Cabinet side panels are NOT included and are sold separately. (See table below)
Accessories
- Universal Rack Shelf
- Adjustable Depth Shelf
- Rack Mount Locking Storage Drawer
- Adjustable Depth Cable Manager
- Horizontal Lacing Strip
- Horizontal Hinged Cable Manager
- Horizontal Ring Cable Manager
- Horizontal Finger Cable Manager
- Horizontal Steel Finger Cable Manager
- Cable Management Arm
- Mounting Hardware
- Cabinet Top Panels
- Grounding & Bonding
- Rack Panels
- PDUs and Outlet Strips
- Equipment Cooling
- Open Frame Rack and Rack Cabinet Joining Kit
- Bolt Down Kit
- Compact LED Light Kit
SKU: H13052U48WH -
Rack Mounting Solutions, Server Racks and Cabinets, Assembled, Hammond
Data Center Server Cabinet H1 Series – (H13152U42WH)
Rack Mounting Solutions, Server Racks and Cabinets, Assembled, HammondData Center Server Cabinet H1 Series – (H13152U42WH)
The H1 series is designed to be your most complete offering for Server, Network, and Data Storage applications. This series incorporates Hammond Manufacturing’s practical open-design and manufacturing principles with legendary service, support, and reliability. H1 cabinets feature an array of enhancements over traditional cabinets, with cooling performance and enhanced security features demanded by today’s IT manager.
Features
- Available in 42U, 45U, 48U, and 52U mounting heights.
- 24” Width Frame Features:
- Generous cabling space
- The cabinet top includes four (4) 3.5” wide cable entry holes.
- 30” & 31.5″ Width Frame Features:
- Mounting rails in 30″ and 31.5″ wide frames include “Bonus” 1U space for optional rack accessories, such as cable management or power bars.
- The cabinet top includes four (4) 3.5” wide cable entry holes.
- Support for vertical cable managers without obstructing mounting rails.
- Available in 42″ and 48″ overall depths.
- Two (2) large 4″ x 7″ knockouts (per side) for cable pass-through.
- Side panels are sold separately.
- 42U and 45U are full-height panels.
- 48U and 52U are split height panels.
- 48″ depth cabinet includes:
- Two (2) large 4″ x 7″ knockouts for cable entry knockouts at the front/top.
- C-channel struts provide cabinet strength, ease, and flexibility to adjust mounting rails.
- Surface-mounted doors allow for full mounting depth utilization and include a locking swing handle.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and optional side panels constructed in 16-gauge steel.
- Square hole 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are powder coat finished.
- UL Listed 2416 load rated for up to 3,000 lbs (1,360 kg). Rolling caster load rated for up to 2,200 lbs (998 kg) and Static Load tested to 12,000 lbs (5,443 kg).
- Grounding studs bonded to the frame, side panels, and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black or RAL9003 white powder paint.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Included Components
- Welded steel frame with factory-installed nylon leveling feet, recessed casters, and grounding studs.
- Two (2) pairs of adjustable depth EIA-compliant square hole punched mounting rails.
- Starter pack of CAGKIT1032-50 screws and cage nuts.
-
One (1) perforated front door (79% open area vented) with locking swing handle.
-
One (1) perforated split/barn rear door (79% open area vented) with locking swing handle.
- One (1) solid and one (1) brushed cable entry top panels are interchangeable.
- One (1) PDU cable tray is mounted in the rear.
Note: Cabinet side panels are NOT included and are sold separately. (See table below)
Accessories
- Universal Rack Shelf
- Adjustable Depth Shelf
- Rack Mount Locking Storage Drawer
- Adjustable Depth Cable Manager
- Horizontal Lacing Strip
- Horizontal Hinged Cable Manager
- Horizontal Ring Cable Manager
- Horizontal Finger Cable Manager
- Horizontal Steel Finger Cable Manager
- Cable Management Arm
- Mounting Hardware
- Cabinet Top Panels
- Grounding & Bonding
- Rack Panels
- PDUs and Outlet Strips
- Equipment Cooling
- Open Frame Rack and Rack Cabinet Joining Kit
- Bolt Down Kit
- Compact LED Light Kit
SKU: H13152U42WH -
Assembled, Rack Mounting Solutions, Server Racks and Cabinets, Hammond
Data Center Server Cabinet H1 Series – (H13148U48WH)
Assembled, Rack Mounting Solutions, Server Racks and Cabinets, HammondData Center Server Cabinet H1 Series – (H13148U48WH)
The H1 series is designed to be your most complete offering for Server, Network, and Data Storage applications. This series incorporates Hammond Manufacturing’s practical open-design and manufacturing principles with legendary service, support, and reliability. H1 cabinets feature an array of enhancements over traditional cabinets, with cooling performance and enhanced security features demanded by today’s IT manager.
Features
- Available in 42U, 45U, 48U, and 52U mounting heights.
- 24” Width Frame Features:
- Generous cabling space
- The cabinet top includes four (4) 3.5” wide cable entry holes.
- 30” & 31.5″ Width Frame Features:
- Mounting rails in 30″ and 31.5″ wide frames include “Bonus” 1U space for optional rack accessories, such as cable management or power bars.
- The cabinet top includes four (4) 3.5” wide cable entry holes.
- Support for vertical cable managers without obstructing mounting rails.
- Available in 42″ and 48″ overall depths.
- Two (2) large 4″ x 7″ knockouts (per side) for cable pass-through.
- Side panels are sold separately.
- 42U and 45U are full-height panels.
- 48U and 52U are split height panels.
- 48″ depth cabinet includes:
- Two (2) large 4″ x 7″ knockouts for cable entry knockouts at the front/top.
- C-channel struts provide cabinet strength, ease, and flexibility to adjust mounting rails.
- Surface-mounted doors allow for full mounting depth utilization and include a locking swing handle.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and optional side panels constructed in 16-gauge steel.
- Square hole 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are powder coat finished.
- UL Listed 2416 load rated for up to 3,000 lbs (1,360 kg). Rolling caster load rated for up to 2,200 lbs (998 kg) and Static Load tested to 12,000 lbs (5,443 kg).
- Grounding studs bonded to the frame, side panels, and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black or RAL9003 white powder paint.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Included Components
- Welded steel frame with factory-installed nylon leveling feet, recessed casters, and grounding studs.
- Two (2) pairs of adjustable depth EIA-compliant square hole punched mounting rails.
- Starter pack of CAGKIT1032-50 screws and cage nuts.
-
One (1) perforated front door (79% open area vented) with locking swing handle.
-
One (1) perforated split/barn rear door (79% open area vented) with locking swing handle.
- One (1) solid and one (1) brushed cable entry top panels are interchangeable.
- One (1) PDU cable tray is mounted in the rear.
Note: Cabinet side panels are NOT included and are sold separately. (See table below)
Accessories
- Universal Rack Shelf
- Adjustable Depth Shelf
- Rack Mount Locking Storage Drawer
- Adjustable Depth Cable Manager
- Horizontal Lacing Strip
- Horizontal Hinged Cable Manager
- Horizontal Ring Cable Manager
- Horizontal Finger Cable Manager
- Horizontal Steel Finger Cable Manager
- Cable Management Arm
- Mounting Hardware
- Cabinet Top Panels
- Grounding & Bonding
- Rack Panels
- PDUs and Outlet Strips
- Equipment Cooling
- Open Frame Rack and Rack Cabinet Joining Kit
- Bolt Down Kit
- Compact LED Light Kit
SKU: H13148U48WH -
Assembled, Rack Mounting Solutions, Server Racks and Cabinets, Hammond
Data Center Server Cabinet H1 Series – (H13052U48BK)
Assembled, Rack Mounting Solutions, Server Racks and Cabinets, HammondData Center Server Cabinet H1 Series – (H13052U48BK)
The H1 series is designed to be your most complete offering for Server, Network, and Data Storage applications. This series incorporates Hammond Manufacturing’s practical open-design and manufacturing principles with legendary service, support, and reliability. H1 cabinets feature an array of enhancements over traditional cabinets, with cooling performance and enhanced security features demanded by today’s IT manager.
Features
- Available in 42U, 45U, 48U, and 52U mounting heights.
- 24” Width Frame Features:
- Generous cabling space
- The cabinet top includes four (4) 3.5” wide cable entry holes.
- 30” & 31.5″ Width Frame Features:
- Mounting rails in 30″ and 31.5″ wide frames include “Bonus” 1U space for optional rack accessories, such as cable management or power bars.
- The cabinet top includes four (4) 3.5” wide cable entry holes.
- Support for vertical cable managers without obstructing mounting rails.
- Available in 42″ and 48″ overall depths.
- Two (2) large 4″ x 7″ knockouts (per side) for cable pass-through.
- Side panels are sold separately.
- 42U and 45U are full-height panels.
- 48U and 52U are split height panels.
- 48″ depth cabinet includes:
- Two (2) large 4″ x 7″ knockouts for cable entry knockouts at the front/top.
- C-channel struts provide cabinet strength, ease, and flexibility to adjust mounting rails.
- Surface-mounted doors allow for full mounting depth utilization and include a locking swing handle.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and optional side panels constructed in 16-gauge steel.
- Square hole 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are powder coat finished.
- UL Listed 2416 load rated for up to 3,000 lbs (1,360 kg). Rolling caster load rated for up to 2,200 lbs (998 kg) and Static Load tested to 12,000 lbs (5,443 kg).
- Grounding studs bonded to the frame, side panels, and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black or RAL9003 white powder paint.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Included Components
- Welded steel frame with factory-installed nylon leveling feet, recessed casters, and grounding studs.
- Two (2) pairs of adjustable depth EIA-compliant square hole punched mounting rails.
- Starter pack of CAGKIT1032-50 screws and cage nuts.
-
One (1) perforated front door (79% open area vented) with locking swing handle.
-
One (1) perforated split/barn rear door (79% open area vented) with locking swing handle.
- One (1) solid and one (1) brushed cable entry top panels are interchangeable.
- One (1) PDU cable tray is mounted in the rear.
Note: Cabinet side panels are NOT included and are sold separately. (See table below)
Accessories
- Universal Rack Shelf
- Adjustable Depth Shelf
- Rack Mount Locking Storage Drawer
- Adjustable Depth Cable Manager
- Horizontal Lacing Strip
- Horizontal Hinged Cable Manager
- Horizontal Ring Cable Manager
- Horizontal Finger Cable Manager
- Horizontal Steel Finger Cable Manager
- Cable Management Arm
- Mounting Hardware
- Cabinet Top Panels
- Grounding & Bonding
- Rack Panels
- PDUs and Outlet Strips
- Equipment Cooling
- Open Frame Rack and Rack Cabinet Joining Kit
- Bolt Down Kit
- Compact LED Light Kit
SKU: H13052U48BK -
Server Racks and Cabinets, Assembled, Rack Mounting Solutions, Hammond
Data Center Server Cabinet H1 Series – (H13152U42BK)
Server Racks and Cabinets, Assembled, Rack Mounting Solutions, HammondData Center Server Cabinet H1 Series – (H13152U42BK)
The H1 series is designed to be your most complete offering for Server, Network, and Data Storage applications. This series incorporates Hammond Manufacturing’s practical open-design and manufacturing principles with legendary service, support, and reliability. H1 cabinets feature an array of enhancements over traditional cabinets, with cooling performance and enhanced security features demanded by today’s IT manager.
Features
- Available in 42U, 45U, 48U, and 52U mounting heights.
- 24” Width Frame Features:
- Generous cabling space
- The cabinet top includes four (4) 3.5” wide cable entry holes.
- 30” & 31.5″ Width Frame Features:
- Mounting rails in 30″ and 31.5″ wide frames include “Bonus” 1U space for optional rack accessories, such as cable management or power bars.
- The cabinet top includes four (4) 3.5” wide cable entry holes.
- Support for vertical cable managers without obstructing mounting rails.
- Available in 42″ and 48″ overall depths.
- Two (2) large 4″ x 7″ knockouts (per side) for cable pass-through.
- Side panels are sold separately.
- 42U and 45U are full-height panels.
- 48U and 52U are split height panels.
- 48″ depth cabinet includes:
- Two (2) large 4″ x 7″ knockouts for cable entry knockouts at the front/top.
- C-channel struts provide cabinet strength, ease, and flexibility to adjust mounting rails.
- Surface-mounted doors allow for full mounting depth utilization and include a locking swing handle.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and optional side panels constructed in 16-gauge steel.
- Square hole 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are powder coat finished.
- UL Listed 2416 load rated for up to 3,000 lbs (1,360 kg). Rolling caster load rated for up to 2,200 lbs (998 kg) and Static Load tested to 12,000 lbs (5,443 kg).
- Grounding studs bonded to the frame, side panels, and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black or RAL9003 white powder paint.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Included Components
- Welded steel frame with factory-installed nylon leveling feet, recessed casters, and grounding studs.
- Two (2) pairs of adjustable depth EIA-compliant square hole punched mounting rails.
- Starter pack of CAGKIT1032-50 screws and cage nuts.
-
One (1) perforated front door (79% open area vented) with locking swing handle.
-
One (1) perforated split/barn rear door (79% open area vented) with locking swing handle.
- One (1) solid and one (1) brushed cable entry top panels are interchangeable.
- One (1) PDU cable tray is mounted in the rear.
Note: Cabinet side panels are NOT included and are sold separately. (See table below)
Accessories
- Universal Rack Shelf
- Adjustable Depth Shelf
- Rack Mount Locking Storage Drawer
- Adjustable Depth Cable Manager
- Horizontal Lacing Strip
- Horizontal Hinged Cable Manager
- Horizontal Ring Cable Manager
- Horizontal Finger Cable Manager
- Horizontal Steel Finger Cable Manager
- Cable Management Arm
- Mounting Hardware
- Cabinet Top Panels
- Grounding & Bonding
- Rack Panels
- PDUs and Outlet Strips
- Equipment Cooling
- Open Frame Rack and Rack Cabinet Joining Kit
- Bolt Down Kit
- Compact LED Light Kit
SKU: H13152U42BK -
Rack Mounting Solutions, Server Racks and Cabinets, Assembled, Hammond
Data Center Server Cabinet H1 Series – (H13148U48BK)
Rack Mounting Solutions, Server Racks and Cabinets, Assembled, HammondData Center Server Cabinet H1 Series – (H13148U48BK)
The H1 series is designed to be your most complete offering for Server, Network, and Data Storage applications. This series incorporates Hammond Manufacturing’s practical open-design and manufacturing principles with legendary service, support, and reliability. H1 cabinets feature an array of enhancements over traditional cabinets, with cooling performance and enhanced security features demanded by today’s IT manager.
Features
- Available in 42U, 45U, 48U, and 52U mounting heights.
- 24” Width Frame Features:
- Generous cabling space
- The cabinet top includes four (4) 3.5” wide cable entry holes.
- 30” & 31.5″ Width Frame Features:
- Mounting rails in 30″ and 31.5″ wide frames include “Bonus” 1U space for optional rack accessories, such as cable management or power bars.
- The cabinet top includes four (4) 3.5” wide cable entry holes.
- Support for vertical cable managers without obstructing mounting rails.
- Available in 42″ and 48″ overall depths.
- Two (2) large 4″ x 7″ knockouts (per side) for cable pass-through.
- Side panels are sold separately.
- 42U and 45U are full-height panels.
- 48U and 52U are split height panels.
- 48″ depth cabinet includes:
- Two (2) large 4″ x 7″ knockouts for cable entry knockouts at the front/top.
- C-channel struts provide cabinet strength, ease, and flexibility to adjust mounting rails.
- Surface-mounted doors allow for full mounting depth utilization and include a locking swing handle.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and optional side panels constructed in 16-gauge steel.
- Square hole 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are powder coat finished.
- UL Listed 2416 load rated for up to 3,000 lbs (1,360 kg). Rolling caster load rated for up to 2,200 lbs (998 kg) and Static Load tested to 12,000 lbs (5,443 kg).
- Grounding studs bonded to the frame, side panels, and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black or RAL9003 white powder paint.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Included Components
- Welded steel frame with factory-installed nylon leveling feet, recessed casters, and grounding studs.
- Two (2) pairs of adjustable depth EIA-compliant square hole punched mounting rails.
- Starter pack of CAGKIT1032-50 screws and cage nuts.
-
One (1) perforated front door (79% open area vented) with locking swing handle.
-
One (1) perforated split/barn rear door (79% open area vented) with locking swing handle.
- One (1) solid and one (1) brushed cable entry top panels are interchangeable.
- One (1) PDU cable tray is mounted in the rear.
Note: Cabinet side panels are NOT included and are sold separately. (See table below)
Accessories
- Universal Rack Shelf
- Adjustable Depth Shelf
- Rack Mount Locking Storage Drawer
- Adjustable Depth Cable Manager
- Horizontal Lacing Strip
- Horizontal Hinged Cable Manager
- Horizontal Ring Cable Manager
- Horizontal Finger Cable Manager
- Horizontal Steel Finger Cable Manager
- Cable Management Arm
- Mounting Hardware
- Cabinet Top Panels
- Grounding & Bonding
- Rack Panels
- PDUs and Outlet Strips
- Equipment Cooling
- Open Frame Rack and Rack Cabinet Joining Kit
- Bolt Down Kit
- Compact LED Light Kit
SKU: H13148U48BK -
Discontinued Products
Type 4 Mild Steel Freestanding Enclosure 1418 N4 FS QT Series – (1418N4Y24QT) (DISCONTINUED)
Discontinued ProductsType 4 Mild Steel Freestanding Enclosure 1418 N4 FS QT Series – (1418N4Y24QT) (DISCONTINUED)
Application
- Designed to house electrical, electronic, hydraulic or pneumatic controls with provision for panel mounting or rack mounting of equipment.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion is a serious problem.
- A variety of inner panels, rack mounting rails and swing out frames are available to provide flexibility in mounting arrangements.
Standards
- UL 508A Type 3R, 4 and 12
- CSA Type 3R, 4 and 12
- Complies with
- NEMA Type 3R, 4, 12 and 3
- IEC 60529, IP66
Construction
- Formed 12 gauge steel.
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Lifting eyes provide for easy enclosure handling.
- Doors are supported with heavy gauge continuous hinges.
- Doors are secured quarter turn latches.
- Seamless poured-in place gasket.
- Provision for light kit mounting.
- Mounting channels are welded on the inside of the enclosure for mounting of optional inner panels or rack equipment rails.
- A grounding stud is provided in the enclosure and a bonding stud is provided on the door.
Finish
- Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating.
- Optional inner panels are available in white powder coating, or unpainted galvanized steel.
Accessories
- Inner Panels
- Panel Rails
- Swing Out Frames
- Door Stop Kit
- Drip Shield Kit
- Floor Stand Kit
- Window Kits
- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Optional Part No. H W D Full Panel¹ 1418N4W18QT 72.06 25.06 18.06 72WFW 1418N4X24QT 72.06 31.06 24.06 72XFW 1418N4Y24QT 72.06 37.06 24.06 72YFW SKU: 1418N4Y24QT -
Discontinued Products
Type 4 Mild Steel Freestanding Enclosure 1418 N4 FS Series – (1418N4Y24) (DISCONTINUED)
Discontinued ProductsType 4 Mild Steel Freestanding Enclosure 1418 N4 FS Series – (1418N4Y24) (DISCONTINUED)
Application
- Designed to house electrical, electronic, hydraulic or pneumatic controls with provision for panel mounting or rack mounting of equipment.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion is a serious problem.
- A variety of inner panels, rack mounting rails and swing out frames are available to provide flexibility in mounting arrangements.
Standards
- UL 508A Type 3R, 4 and 12
- CSA Type 3R, 4 and 12
- Complies with
- NEMA Type 3R, 4, 12 and 3
- IEC 60529, IP66
Construction
- Formed 12 gauge steel.
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Lifting eyes provide for easy enclosure handling.
- Doors are supported with heavy gauge continuous hinges.
- Doors are secured with heavy duty stainless steel clamps.
- Seamless poured-in place gasket.
- Provision for light kit mounting.
- Mounting channels are welded on the inside of the enclosure for mounting of optional inner panels or rack equipment rails.
- A grounding stud is provided in the enclosure and a bonding stud is provided on the door.
Finish
- Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating.
- Optional inner panels are available in white powder coating, or unpainted galvanized steel.
Accessories
SKU: 1418N4Y24 -
Discontinued Products
Type 4X Stainless Steel Wallmount Disconnect Enclosure 1447S N4 SS Series – (1447SN4SSJ12) (DISCONTINUED)
Discontinued ProductsType 4X Stainless Steel Wallmount Disconnect Enclosure 1447S N4 SS Series – (1447SN4SSJ12) (DISCONTINUED)
Application
- Designed to house the following safety disconnect equipment:
- ABB Controls flange mounted variable depth operating mechanisms for disconnect switches and circuit breakers. Cable version for circuit breakers also available.
- Allen Bradley 1494V variable depth flange mounted disconnect switches and circuit breaker operators NEMA 4 rated. Will not accept Allen Bradley 1494F disconnect switches, 1494D circuit breaker operators or 1494V-R1, -R2, or -W2 operating handles).
- Cutler Hammer C361 variable depth flange mounted disconnect switches and C371 circuit breaker operators. Also Flex-Shaft™ handle mechanisms for circuit breakers. Use Cutler Hammer NEMA 4X rated operating handles to maintain NEMA 4X integrity.
- Siemens I-T-E Max-Flex™ flange mounted variable depth handles for disconnect switch and circuit breakers. Use handle for NEMA 4 rating.
- General Electric Type STDA flange handles and variable depth operating mechanisms for disconnect switches and circuit breakers. Also SpectraFlex™ cable operators for circuit breakers.
- Square D Class 9422 disconnect switches with flange mounted variable depth operating mechanisms or cable mechanisms and Class 9422 flange mounted variable depth operating mechanism or cable mechanisms for circuit breakers. SN4SS enclosures will not accept Square D Class 9422 bracket-mounted disconnect devices, 9422TG1 or TG2 devices.
- Refer to the Type 4 Wallmount Selection Guide.
Standards
- UL 508A Type 3R, 4 and 4X
- CSA Type 3R, 4 and 4X
- Complies with
- NEMA Type 3R, 4, 4X, 12 and 13
- IEC 60529, IP66
- Appropriate components are required to maintain these standards.
Construction
- Formed 14 gauge type 304 stainless steel.
- Continuously welded seams.
- Larger sizes include door and body stiffeners.
- Formed lip on door and enclosure exclude flowing liquids and contaminants.
- Cutouts and holes are provided to suit the flange handle operating mechanism.
- Continuously hinged doors may be removed by pulling the stainless steel hinge pin.
- Door is secured with easily operated stainless steel clamps.
- Cover interlock bracket is welded to the door.
- Collar studs are provided for mounting inner panels.
- A removable 12 gauge inner panel is included.
- Seamless poured-in place gasket.
- A bonding stud is provided on the door and a grounding stud is provided in the enclosure.
- A literature pocket is provided for the inside of the door.
Finish
- Disconnects and operating mechanisms are not provided with the enclosure, and must be ordered separately from the manufacturer.
Accessories
- Additional Inner Panels
- Door Stop Kit
- Floor Stand Kit
- Drip Shield Kit
- Door Clamping Hardware
- Window Kits
- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Inner Panel Part No. H W D H W 1447SN4SSB8 24.00 21.38 8.00 21.00 17.00 1447SN4SSC8 24.00 25.38 8.00 21.00 21.00 1447SN4SSE8 30.00 25.38 8.00 27.00 21.00 1447SN4SSF8 36.00 25.38 8.00 33.00 21.00 1447SN4SSG8 36.00 31.38 8.00 33.00 27.00 1447SN4SSH12 42.00 31.38 12.00 39.00 27.00 1447SN4SSJ12 42.00 37.38 12.00 39.00 33.00 1447SN4SSK12 48.00 37.38 12.00 45.00 33.00 1447SN4SSL12 60.00 37.38 12.00 57.00 33.00 SKU: 1447SN4SSJ12 - Designed to house the following safety disconnect equipment:
-
Discontinued Products
3000-10000 BTU/H Air/Water Heat Exchanger PWS 7000 Series – (PWS7332A230N4SS) (DISCONTINUED)
Discontinued Products3000-10000 BTU/H Air/Water Heat Exchanger PWS 7000 Series – (PWS7332A230N4SS) (DISCONTINUED)
Description
- Designed to use various water sources to cool enclosures where ambient conditions involve high temperatures, harsh conditions or are subject to frequent wash-down.
Standards
- UL, cUL, and CE
- Complies with
- NEMA 3R, 4, 4X
Features
- Compatible with chilled water/glycol, tower water and other circulated coolants
- Integrated thermostat & solenoid value with alarm contact provides automatic temperature control
- Rugged (10 bar) copper tube / aluminum fin heat exchanger with 1/2″ barb connection
- Side, door or internal mounting provides complete installation flexibility
- Low noise, maintenance-free design
- Exterior case, galvanized steel construction finish RAL7035 Light Gray
Accessories
SKU: PWS7332A230N4SS