Shop By Brand
American Tech Supply Full Catalog
Showing 145–168 of 115611 results
-
Discontinued Products
Type 4, 12 Mild Steel Junction Box HJ Series – (HJ161410LP) (DISCONTINUED)
Application
- Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
- Provides a degree of protection from falling dirt, dust, oil and water.
Standards
- UL 508A Type 3R, 4, 12 and 13
- CSA Type 3R, 4, 12 and 13
- Complies with
- NEMA Type 3R, 4, 12 and 13
- IEC 60529, IP66
Construction
- Body formed from 16 gauge or 14 gauge steel. Covers are formed from 14 gauge steel.
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Welded brackets provide for enclosure mounting.
- Lift off cover is secured with stainless steel clamps and stainless steel screws and retained with a stainless steel chain when open.
- Seamless poured-in place gasket.
- Internal threaded weld studs are provided for mounting inner panels.
- A bonding stud is provided on the door and a grounding stud is provided on the enclosure.
Finish
- Cover and enclosure are phosphatized and finished in ANSI 61 gray recoatable powder coating
Accessories
Additional Inner Panels- Terminal Kit Assemblies
- Swing Panel Kit
- Door Clamping Hardware
- Climate Control
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Optional Inner Panel Part No. H W D Part No. H W HJ443LP 4.00 4.00 3.00 – – – HJ643LP 6.00 4.00 3.00 14R0503 4.88 2.88 HJ863LP 8.00 6.00 3.50 14R0705 6.75 4.88 HJ444LP 4.00 4.00 4.00 – – – HJ644LP 6.00 4.00 4.00 14R0503 4.88 2.88 HJ664LP 6.00 6.00 4.00 14R0505 4.88 4.88 HJ1084LP 10.00 8.00 4.00 14R0907 8.75 6.88 HJ12105LP 12.00 10.00 5.00 14R1109 10.75 8.88 HJ14126LP 14.00 12.00 6.00 14R1311 12.75 10.88 HJ16146LP 16.00 14.00 6.00 14R1513 14.75 12.88 HJ14128LP 14.00 12.00 8.00 14R1311 12.75 10.88 HJ161410LP 16.00 14.00 10.00 14R1513 14.75 12.88 SKU: HJ161410LP -
Discontinued Products
Type 1 Mild Steel Junction Box CHKO Series – (CHKO36248) (DISCONTINUED)
Application
- Designed for general purpose indoor commercial use as a junction, pull or switch box.
- Hinged cover with latch provides easy access during installation and maintenance.
Standards
- UL-50 Type 1
- CSA Type 1
- Complies with
- NEMA Type 1
- IEC 60529, IP20
Construction
- Formed and spot welded from 16 gauge (up to 30″x24″) or 14 gauge (36″x24″) steel.
- Formed steel covers close by use of slotted quarter turn latch.
- Full swing, hinged door. NOTE: Former butt hinge being transitioned to new integral design starting late 2020. See image gallery for view of new hinge.
- Easily removed knockouts on all 4 sides (see drawings for sizes and locations).
- Through holes in back for wall mounting.
- Grounding location embossed in body.
Finish
- Enclosure and cover are finished in ANSI 61 gray powder coating.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Part No. H W D CHKO663 6.00 6.00 3.50 CHKO644 6.00 4.00 4.00 CHKO664 6.00 6.00 4.00 CHKO864 8.00 6.00 4.00 CHKO884 8.00 8.00 4.00 CHKO1084 10.00 8.00 4.00 CHKO10104 10.00 10.00 4.00 CHKO1284 12.00 8.00 4.00 CHKO12104 12.00 10.00 4.00 CHKO12124 12.00 12.00 4.00 CHKO16124 16.00 12.00 4.00 CHKO18124 18.00 12.00 4.00 CHKO666 6.00 6.00 6.00 CHKO886 8.00 8.00 6.00 CHKO1086 10.00 8.00 6.00 CHKO10106 10.00 10.00 6.00 CHKO12106 12.00 10.00 6.00 CHKO12126 12.00 12.00 6.00 CHKO16126 16.00 12.00 6.00 CHKO16166 16.00 16.00 6.00 CHKO18126 18.00 12.00 6.00 CHKO18186 18.00 18.00 6.00 CHKO24186 24.00 18.00 6.00 CHKO24246 24.00 24.00 6.00 CHKO30246 30.00 24.00 6.00 CHKO36246 36.00 24.00 6.00 CHKO36248 36.00 24.00 8.00 SKU: CHKO36248 -
Discontinued Products
Type 12 Pull Through Wireway 1487 Series – (1487DT) (DISCONTINUED)
Application
- Designed to enclose and protect electrical wiring from dirt, dust, oil and water.
- Ideal for connecting machines to control panels or power sources.
Standards
- UL 870 Type 1 (unless marked¹)
- CSA Type 1 (unless marked¹)
- Complies with
- NEMA Type 12
- IEC 60529, IP54
Construction
- Bodies and covers are formed from 14 gauge steel with 10 gauge steel flanges.
- Continuous flange around wireway ends, requires cables to be pulled through. (For lay-in style, see 1485 Series.)
- Smooth continuously welded seams.
- Interior surfaces are smooth to prevent wire damage during installation.
- Butt hinged covers are secured with easily operated screw clamps.
- Oil resistant gaskets are permanently secured.
- Solid oil resistant gaskets are used between flanges when sections and fittings are bolted together.
- One gasket kit, complete with hardware is provided with each straight section or fitting.
Finish
- Sections and fittings are finished in ANSI 61 gray.
Accessories
SKU: 1487DT -
Discontinued Products
Type 4X Polycarbonate Junction Box (Solid and Clear Cover) (DISCONTINUED) PCJ Series – (PCJ181610CCL) (DISCONTINUED)
Discontinued ProductsType 4X Polycarbonate Junction Box (Solid and Clear Cover) (DISCONTINUED) PCJ Series – (PCJ181610CCL) (DISCONTINUED)
Application
- Designed to insulate and protect controls and components in both indoor and outdoor conditions
- Ideal for industrial pump controls, waste water, irrigation control along with solar/wind and chemical plants
Standards
- UL 508A Type 1, 2, 3, 3R, 4, 4X, 12 and 13
- CSA Type 1, 2, 3, 3R, 4, 4X, 12 and 13
- Complies with
- NEMA Type 1, 2, 3, 3R, 4, 4X, 12 and 13
- IEC 60529, IP66
- Flammability V-O per UL 94
- UV rating (f1) per UL746C – UV stabilized for outdoor use
- Compliant with RoHS directive
Construction
- Injection moulded polycarbonate thermoplastic enclosure with matching cover is easily punched, cut, or drilled
- Enhanced UV inhibitors protect against outdoor weathering
- Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included
- Stainless steel 316 screw fasteners
- Door fasteners include a provision for padlocking on Snap Latches
- Enclosure available with clear Polycarbonate cover
- Molded hinge
- Captive oil resistant gasket provides a positive seal
- Available with Polycarbonate flange or foot mount brackets for multi-directional mounting
- Operating temperatures between 130°C and – 35 °C (266°F to – 31 °F)
- Impact index of 16 J (12 ft/lb)
- For corrosion resistance information, please refer to table in the Technical Information section
Finish
- Polycarbonate material has a light gray finish
- Optional inner panels are available in white powder coated finished steel, unfinished aluminum, or fiberglass
Accessories
- Additional Inner Panels
- Swing Panel
- Pole Mounting Kit
- PJ/PJU/PCJ Replacement Hardware Kits
- PJU/PCJ Replacement Polycarbonate Flange
- PJU/PCJ Replacement Polycarbonate Feet
- Climate Control
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
