American Tech Supply Full Catalog
Showing 2281–2304 of 75476 results
-
Discontinued Products
Type 4 Mild Steel Freestanding Enclosure 1418 N4 FS QT Series – (1418N4W18QT) (DISCONTINUED)
Discontinued ProductsType 4 Mild Steel Freestanding Enclosure 1418 N4 FS QT Series – (1418N4W18QT) (DISCONTINUED)
Application
- Designed to house electrical, electronic, hydraulic or pneumatic controls with provision for panel mounting or rack mounting of equipment.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion is a serious problem.
- A variety of inner panels, rack mounting rails and swing out frames are available to provide flexibility in mounting arrangements.
Standards
- UL 508A Type 3R, 4 and 12
- CSA Type 3R, 4 and 12
- Complies with
- NEMA Type 3R, 4, 12 and 3
- IEC 60529, IP66
Construction
- Formed 12 gauge steel.
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Lifting eyes provide for easy enclosure handling.
- Doors are supported with heavy gauge continuous hinges.
- Doors are secured quarter turn latches.
- Seamless poured-in place gasket.
- Provision for light kit mounting.
- Mounting channels are welded on the inside of the enclosure for mounting of optional inner panels or rack equipment rails.
- A grounding stud is provided in the enclosure and a bonding stud is provided on the door.
Finish
- Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating.
- Optional inner panels are available in white powder coating, or unpainted galvanized steel.
Accessories
Inner Panels
Panel Rails
Swing Out Frames
Door Stop Kit
Drip Shield Kit
Floor Stand Kit
Window Kits
Climate Control
Lighting
General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Optional Part No. H W D Full Panel¹ 1418N4W18QT 72.06 25.06 18.06 72WFW 1418N4X24QT 72.06 31.06 24.06 72XFW 1418N4Y24QT 72.06 37.06 24.06 72YFW SKU: 1418N4W18QT -
Discontinued Products
Type 4 Mild Steel Freestanding Enclosure 1418 N4 FS Series – (1418N4W18) (DISCONTINUED)
Discontinued ProductsType 4 Mild Steel Freestanding Enclosure 1418 N4 FS Series – (1418N4W18) (DISCONTINUED)
Application
- Designed to house electrical, electronic, hydraulic or pneumatic controls with provision for panel mounting or rack mounting of equipment.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion is a serious problem.
- A variety of inner panels, rack mounting rails and swing out frames are available to provide flexibility in mounting arrangements.
Standards
- UL 508A Type 3R, 4 and 12
- CSA Type 3R, 4 and 12
- Complies with
- NEMA Type 3R, 4, 12 and 3
- IEC 60529, IP66
Construction
- Formed 12 gauge steel.
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Lifting eyes provide for easy enclosure handling.
- Doors are supported with heavy gauge continuous hinges.
- Doors are secured with heavy duty stainless steel clamps.
- Seamless poured-in place gasket.
- Provision for light kit mounting.
- Mounting channels are welded on the inside of the enclosure for mounting of optional inner panels or rack equipment rails.
- A grounding stud is provided in the enclosure and a bonding stud is provided on the door.
Finish
- Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating.
- Optional inner panels are available in white powder coating, or unpainted galvanized steel.
Accessories
Inner Panels
Panel Rails
Swing Out Frames
Door Stop Kit
Drip Shield Kit
Floor Stand Kit
Window Kits
Climate Control
Lighting
General Accessories
SKU: 1418N4W18 -
Power Solutions, UPS, UPS, Data Cabinets and Racks, Power Solutions, Great Lakes
UPS Solutions Line Interactive Lead Acid – 2200VA Power Capcity / 120V /4 Post Mounting / 1 Bypass Module – Great Lakes Data Racks and Cabinets
Power Solutions, UPS, UPS, Data Cabinets and Racks, Power Solutions, Great LakesUPS Solutions Line Interactive Lead Acid – 2200VA Power Capcity / 120V /4 Post Mounting / 1 Bypass Module – Great Lakes Data Racks and Cabinets
Suggested pricing, call for discounts
SKU: GLUPS-LILA-220A-120-0BP-0M-1BY-4P -
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Cabinets, Hammond
Swing-Out Wall Mount and Floor Rack Cabinet HWF Series – (HWF3048U36WH)
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Cabinets, HammondSwing-Out Wall Mount and Floor Rack Cabinet HWF Series – (HWF3048U36WH)
Features
- Available in three (3) heights
- HWF mounts to the wall and sits on the floor supported by levelling feet. The swing-out section is supported by casters.
- Optional doors install in minutes and are available in a vented, tinted window and solid. Order part RHHK1 for right-hand hinge kit.
- The top of the rear section includes a “Bonus” 3U space for optional rack mount fans or accessory mounting.
- The main body can be installed to swing from left-to-right or right-to-left. Includes locking twist-latches.
- Includes one (1) pair of adjustable depth threaded 10-32 EIA compliant mounting rack rails.
- Thirty (30) inch wide mounting rails include “Bonus” 1U space for optional rack accessories, such as cable management or power bars.
- 10-32 tapped rails are easy to remove on-site and replace with square hole rails (sold separately) if needed.
- Includes starter pack of SCREW1032-50 screws and CLPKIT1032-25 clip nuts and screws.
Specifications
- Heavy-duty rear and base are constructed in 14-gauge welded steel.
- Optional locking doors are constructed in 16-gauge steel.
- Swing-out cabinet constructed in 16-gauge welded steel and features a spring-hinge pin for easy installation and removal.
- 2.50” and 2.00” conduit knockouts are located on the side.
- 4.00″, 2.00” conduit knockouts and BNC 0.625” knockouts are located on the top.
- Numerous cable management mounting points are included.
- Heavy-duty keyhole for wall mounting and levelling feet.
- Large openings in the rear for cable access designed for mounting over electrical receptacles.
- Dedicated bonding and grounding points that also provide drill-less mounting of electrical utility boxes. Ground Cable Kit sold separately.
- UL Listed 2416 load rated for up to 700 lbs (317 kg). Static Load tested to 2,800 lbs (1,270 kg).
- Finished in textured RAL9005 black or RAL9003 white powder paint.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements, when the door is installed.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: HWF3048U36WH -
Rack Mounting Solutions, Server Racks and Cabinets, Assembled, Hammond
Server Rack Cabinet C4RR Series – (C4RR247331SBK1)
Rack Mounting Solutions, Server Racks and Cabinets, Assembled, HammondServer Rack Cabinet C4RR Series – (C4RR247331SBK1)
When you need cabinets quickly, our pre-assembled C4RR cabinets are a great option. Based on our most popular requested configurations, each cabinet is factory configured and is packaged ready to ship. Click here to view our C4 Series components.
Features
- Available in 42U and 44U mounting heights.
- 24” Width Frame Features:
- Generous cabling space
- The cabinet top includes four (4) 3.5” wide cable entry holes.
- 30” Width Frame Features:
- Mounting rails include cable-tie support and cable pass-through holes.
- The cabinet top includes four (4) 3.5” wide cable entry holes.
- Support for vertical cable managers without obstructing mounting rails.
- Available in 31.5″, 36″ and 42″ overall depths.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Flush-mounted doors with quarter-turn lock.
- One (1) interchangeable top panel.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- Square hole 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- UL Listed 2416 load rated for up to 3,000 lbs (1,360 kg). Static Load tested to 12,000 lbs (5,443 kg).
- Seismic rated up to 1,200 lbs (544 kg) of dynamic load with an Ip factor of 1.5 in accordance with the IBC 2018, CBC 2019, NBC 2015, ASCE 7-16 and ASCE 7-10.
- Grounding studs are provided on the frame as well as side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black powder paint.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
- NMFC FAK Class 70
Included Components
- All configurations include:
- Welded steel frame with factory-installed nylon levelling feet, ground studs, and mounting points for optional casters.
- Two (2) pairs of adjustable depth EIA compliant square hole punched mounting rails.
- Starter pack of CAGKIT1032-25 screws and cage nuts.
- Two (2) removable side panels (with 1/4 turn latches).
- One (1) four (4) fan cutout top panel.
- C4RR “D” Cabinet Specific Components include:
-
One (1) window front door with a quarter-turn lock.
-
One (1) perforated rear door (65% open area vented) with quarter-turn lock.
-
One (1) vertical cable tray with button PDU mounting.
-
- C4RR “S” Cabinet Specific Components include:
-
One (1) perforated front door (65% open area vented) with quarter-turn lock.
-
One (1) perforated split/barn rear door (65% open area vented) with quarter-turn lock.
-
Two (2) vertical cable trays with button PDU mounting.
-
Accessories
Vertical Finger Cable Manager with Door
Vertical Cable Manager with Door
Vertical Cable Tray
Horizontal Finger Cable Manager
Horizontal Ring Cable Manager
Horizontal Steel Finger Cable Manager
Horizontal Hinged Cable Manager
Horizontal Lacing Strip
Rack Panels
Adjustable Depth Cable Manager
Universal Rack Shelf
Adjustable Depth Shelf
Four Post Mounting Sliding Shelf
Sliding Keyboard Shelf
Rack Mount Locking Storage Drawer
Cabinet Top Panels
Side Panel Locking Kit
Cabinet Caster Set
Copper Bonding Busbar
Grounding & Bonding
Mounting Hardware
PDUs and Outlet Strips
Compact LED Light Kit
SKU: C4RR247331SBK1