American Tech Supply Full Catalog
Showing 2281–2304 of 75476 results
-
Discontinued Products
Type 4 Mild Steel Freestanding Enclosure 1418 N4 FS QT Series – (1418N4W18QT) (DISCONTINUED)
Discontinued ProductsType 4 Mild Steel Freestanding Enclosure 1418 N4 FS QT Series – (1418N4W18QT) (DISCONTINUED)
Application
- Designed to house electrical, electronic, hydraulic or pneumatic controls with provision for panel mounting or rack mounting of equipment.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion is a serious problem.
- A variety of inner panels, rack mounting rails and swing out frames are available to provide flexibility in mounting arrangements.
Standards
- UL 508A Type 3R, 4 and 12
- CSA Type 3R, 4 and 12
- Complies with
- NEMA Type 3R, 4, 12 and 3
- IEC 60529, IP66
Construction
- Formed 12 gauge steel.
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Lifting eyes provide for easy enclosure handling.
- Doors are supported with heavy gauge continuous hinges.
- Doors are secured quarter turn latches.
- Seamless poured-in place gasket.
- Provision for light kit mounting.
- Mounting channels are welded on the inside of the enclosure for mounting of optional inner panels or rack equipment rails.
- A grounding stud is provided in the enclosure and a bonding stud is provided on the door.
Finish
- Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating.
- Optional inner panels are available in white powder coating, or unpainted galvanized steel.
Accessories
- Inner Panels
- Panel Rails
- Swing Out Frames
- Door Stop Kit
- Drip Shield Kit
- Floor Stand Kit
- Window Kits
- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Optional Part No. H W D Full Panel¹ 1418N4W18QT 72.06 25.06 18.06 72WFW 1418N4X24QT 72.06 31.06 24.06 72XFW 1418N4Y24QT 72.06 37.06 24.06 72YFW SKU: 1418N4W18QT -
Discontinued Products
Type 4 Mild Steel Freestanding Enclosure 1418 N4 FS Series – (1418N4W18) (DISCONTINUED)
Discontinued ProductsType 4 Mild Steel Freestanding Enclosure 1418 N4 FS Series – (1418N4W18) (DISCONTINUED)
Application
- Designed to house electrical, electronic, hydraulic or pneumatic controls with provision for panel mounting or rack mounting of equipment.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion is a serious problem.
- A variety of inner panels, rack mounting rails and swing out frames are available to provide flexibility in mounting arrangements.
Standards
- UL 508A Type 3R, 4 and 12
- CSA Type 3R, 4 and 12
- Complies with
- NEMA Type 3R, 4, 12 and 3
- IEC 60529, IP66
Construction
- Formed 12 gauge steel.
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Lifting eyes provide for easy enclosure handling.
- Doors are supported with heavy gauge continuous hinges.
- Doors are secured with heavy duty stainless steel clamps.
- Seamless poured-in place gasket.
- Provision for light kit mounting.
- Mounting channels are welded on the inside of the enclosure for mounting of optional inner panels or rack equipment rails.
- A grounding stud is provided in the enclosure and a bonding stud is provided on the door.
Finish
- Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating.
- Optional inner panels are available in white powder coating, or unpainted galvanized steel.
Accessories
SKU: 1418N4W18 -
UPS, UPS, Power Solutions, Data Cabinets and Racks, Power Solutions, Great Lakes
UPS Solutions Line Interactive Lead Acid – 2200VA Power Capcity / 120V /4 Post Mounting / 1 Bypass Module – Great Lakes Data Racks and Cabinets
UPS, UPS, Power Solutions, Data Cabinets and Racks, Power Solutions, Great LakesUPS Solutions Line Interactive Lead Acid – 2200VA Power Capcity / 120V /4 Post Mounting / 1 Bypass Module – Great Lakes Data Racks and Cabinets
Suggested pricing, call for discounts
SKU: GLUPS-LILA-220A-120-0BP-0M-1BY-4P -
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Cabinets, Hammond
Swing-Out Wall Mount and Floor Rack Cabinet HWF Series – (HWF3048U36WH)
Rack Mounting Solutions, Wall Mount Racks and Cabinets, Wall Mount Cabinets, HammondSwing-Out Wall Mount and Floor Rack Cabinet HWF Series – (HWF3048U36WH)
Features
- Available in three (3) heights
- HWF mounts to the wall and sits on the floor supported by levelling feet. The swing-out section is supported by casters.
- Optional doors install in minutes and are available in a vented, tinted window and solid. Order part RHHK1 for right-hand hinge kit.
- The top of the rear section includes a “Bonus” 3U space for optional rack mount fans or accessory mounting.
- The main body can be installed to swing from left-to-right or right-to-left. Includes locking twist-latches.
- Includes one (1) pair of adjustable depth threaded 10-32 EIA compliant mounting rack rails.
- Thirty (30) inch wide mounting rails include “Bonus” 1U space for optional rack accessories, such as cable management or power bars.
- 10-32 tapped rails are easy to remove on-site and replace with square hole rails (sold separately) if needed.
- Includes starter pack of SCREW1032-50 screws and CLPKIT1032-25 clip nuts and screws.
Specifications
- Heavy-duty rear and base are constructed in 14-gauge welded steel.
- Optional locking doors are constructed in 16-gauge steel.
- Swing-out cabinet constructed in 16-gauge welded steel and features a spring-hinge pin for easy installation and removal.
- 2.50” and 2.00” conduit knockouts are located on the side.
- 4.00″, 2.00” conduit knockouts and BNC 0.625” knockouts are located on the top.
- Numerous cable management mounting points are included.
- Heavy-duty keyhole for wall mounting and levelling feet.
- Large openings in the rear for cable access designed for mounting over electrical receptacles.
- Dedicated bonding and grounding points that also provide drill-less mounting of electrical utility boxes. Ground Cable Kit sold separately.
- UL Listed 2416 load rated for up to 700 lbs (317 kg). Static Load tested to 2,800 lbs (1,270 kg).
- Finished in textured RAL9005 black or RAL9003 white powder paint.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements, when the door is installed.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: HWF3048U36WH -
Rack Mounting Solutions, Server Racks and Cabinets, Assembled, Hammond
Server Rack Cabinet C4RR Series – (C4RR247331SBK1)
Rack Mounting Solutions, Server Racks and Cabinets, Assembled, HammondServer Rack Cabinet C4RR Series – (C4RR247331SBK1)
When you need cabinets quickly, our pre-assembled C4RR cabinets are a great option. Based on our most popular requested configurations, each cabinet is factory configured and is packaged ready to ship. Click here to view our C4 Series components.
Features
- Available in 42U and 44U mounting heights.
- 24” Width Frame Features:
- Generous cabling space
- The cabinet top includes four (4) 3.5” wide cable entry holes.
- 30” Width Frame Features:
- Mounting rails include cable-tie support and cable pass-through holes.
- The cabinet top includes four (4) 3.5” wide cable entry holes.
- Support for vertical cable managers without obstructing mounting rails.
- Available in 31.5″, 36″ and 42″ overall depths.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Flush-mounted doors with quarter-turn lock.
- One (1) interchangeable top panel.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- Square hole 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- UL Listed 2416 load rated for up to 3,000 lbs (1,360 kg). Static Load tested to 12,000 lbs (5,443 kg).
- Seismic rated up to 1,200 lbs (544 kg) of dynamic load with an Ip factor of 1.5 in accordance with the IBC 2018, CBC 2019, NBC 2015, ASCE 7-16 and ASCE 7-10.
- Grounding studs are provided on the frame as well as side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black powder paint.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
- NMFC FAK Class 70
Included Components
- All configurations include:
- Welded steel frame with factory-installed nylon levelling feet, ground studs, and mounting points for optional casters.
- Two (2) pairs of adjustable depth EIA compliant square hole punched mounting rails.
- Starter pack of CAGKIT1032-25 screws and cage nuts.
- Two (2) removable side panels (with 1/4 turn latches).
- One (1) four (4) fan cutout top panel.
- C4RR “D” Cabinet Specific Components include:
-
One (1) window front door with a quarter-turn lock.
-
One (1) perforated rear door (65% open area vented) with quarter-turn lock.
-
One (1) vertical cable tray with button PDU mounting.
-
- C4RR “S” Cabinet Specific Components include:
-
One (1) perforated front door (65% open area vented) with quarter-turn lock.
-
One (1) perforated split/barn rear door (65% open area vented) with quarter-turn lock.
-
Two (2) vertical cable trays with button PDU mounting.
-
Accessories
- Vertical Finger Cable Manager with Door
- Vertical Cable Manager with Door
- Vertical Cable Tray
- Horizontal Finger Cable Manager
- Horizontal Ring Cable Manager
- Horizontal Steel Finger Cable Manager
- Horizontal Hinged Cable Manager
- Horizontal Lacing Strip
- Rack Panels
- Adjustable Depth Cable Manager
- Universal Rack Shelf
- Adjustable Depth Shelf
- Four Post Mounting Sliding Shelf
- Sliding Keyboard Shelf
- Rack Mount Locking Storage Drawer
- Cabinet Top Panels
- Side Panel Locking Kit
- Cabinet Caster Set
- Copper Bonding Busbar
- Grounding & Bonding
- Mounting Hardware
- PDUs and Outlet Strips
- Compact LED Light Kit
SKU: C4RR247331SBK1