American Tech Supply Full Catalog
Showing 2353–2376 of 75476 results
-
Discontinued Products
Type 4 Two Door Wallmount Enclosure HN4 WM Series – (HN4WM424812GY) (DISCONTINUED)
Discontinued ProductsType 4 Two Door Wallmount Enclosure HN4 WM Series – (HN4WM424812GY) (DISCONTINUED)
Application
- Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
- Provides protection where equipment may be hosed down or otherwise be very wet, or in outdoor applications for full weather protection.
Construction
- Formed 12 gauge steel
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Doors are supported with heavy gauge continuous hinges.
- 3-pt padlocking door handle.
- Seamless poured-in place gasket.
- A grounding stud is provided in the enclosure and a bonding stud is provided on the door.
- Center post is removable for easy installation of the inner panel.
Standards
- UL 508A Type 3R, 4, and 12
- CSA Type 3R, 4, and 12
- Complies with
- NEMA Type 3R, 4, 12 and 13
- IEC 60529, IP66
Finish
- Cover and enclosure are phosphatized and finished in recoatable smooth ANSI 61 gray powder coating.
- Removable inner panel is finished in white powder coating.
Accessories
Mechanical Interlock
Door Stop Kit
Barrier Kits for Type 4 Wallmount
Type 12/4, 4X Handle Kits
Drip Shield Kit
Window Kits
Climate Control
Lighting
General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Inner Panel Part Number H W D H W HN4WM24428GY 24.00 42.00 8.00 21.00 39.00 HN4WM24488GY 24.00 48.00 8.00 21.00 45.00 HN4WM304210GY 30.00 42.00 10.00 27.00 39.00 HN4WM304810GY 30.00 48.00 10.00 27.00 45.00 HN4WM306010GY 30.00 60.00 10.00 27.00 57.00 HN4WM364212GY 36.00 42.00 12.00 33.00 39.00 HN4WM364812GY 36.00 48.00 12.00 33.00 45.00 HN4WM366012GY 36.00 60.00 12.00 33.00 57.00 HN4WM424212GY 42.00 42.00 12.00 39.00 39.00 HN4WM424812GY 42.00 48.00 12.00 39.00 45.00 HN4WM426012GY 42.00 60.00 12.00 38.00 56.00 HN4WM484812GY 48.00 48.00 12.00 44.00 44.00 SKU: HN4WM424812GY -
Power Solutions, UPS, UPS, Data Cabinets and Racks, Power Solutions, Great Lakes
UPS Solutions Line Interactive Lead Acid – 2200VA Power Capcity / 120V /2 Post Mounting / 1 Bypass Module – Great Lakes Data Racks and Cabinets
Power Solutions, UPS, UPS, Data Cabinets and Racks, Power Solutions, Great LakesUPS Solutions Line Interactive Lead Acid – 2200VA Power Capcity / 120V /2 Post Mounting / 1 Bypass Module – Great Lakes Data Racks and Cabinets
Suggested pricing, call for discounts
SKU: GLUPS-LILA-220A-120-0BP-0M-1BY-2P -
Wall Mount Racks and Cabinets, Wall Mount Cabinets, Rack Mounting Solutions, Hammond
Swing-Out Wall Mount and Floor Rack Cabinet HWF Series – (HWF3042U36BK)
Wall Mount Racks and Cabinets, Wall Mount Cabinets, Rack Mounting Solutions, HammondSwing-Out Wall Mount and Floor Rack Cabinet HWF Series – (HWF3042U36BK)
Features
- Available in three (3) heights
- HWF mounts to the wall and sits on the floor supported by levelling feet. The swing-out section is supported by casters.
- Optional doors install in minutes and are available in a vented, tinted window and solid. Order part RHHK1 for right-hand hinge kit.
- The top of the rear section includes a “Bonus” 3U space for optional rack mount fans or accessory mounting.
- The main body can be installed to swing from left-to-right or right-to-left. Includes locking twist-latches.
- Includes one (1) pair of adjustable depth threaded 10-32 EIA compliant mounting rack rails.
- Thirty (30) inch wide mounting rails include “Bonus” 1U space for optional rack accessories, such as cable management or power bars.
- 10-32 tapped rails are easy to remove on-site and replace with square hole rails (sold separately) if needed.
- Includes starter pack of SCREW1032-50 screws and CLPKIT1032-25 clip nuts and screws.
Specifications
- Heavy-duty rear and base are constructed in 14-gauge welded steel.
- Optional locking doors are constructed in 16-gauge steel.
- Swing-out cabinet constructed in 16-gauge welded steel and features a spring-hinge pin for easy installation and removal.
- 2.50” and 2.00” conduit knockouts are located on the side.
- 4.00″, 2.00” conduit knockouts and BNC 0.625” knockouts are located on the top.
- Numerous cable management mounting points are included.
- Heavy-duty keyhole for wall mounting and levelling feet.
- Large openings in the rear for cable access designed for mounting over electrical receptacles.
- Dedicated bonding and grounding points that also provide drill-less mounting of electrical utility boxes. Ground Cable Kit sold separately.
- UL Listed 2416 load rated for up to 700 lbs (317 kg). Static Load tested to 2,800 lbs (1,270 kg).
- Finished in textured RAL9005 black or RAL9003 white powder paint.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements, when the door is installed.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Accessories
SKU: HWF3042U36BK -
Discontinued Products
900-1300 BTU/H Indoor Air Conditioner DTS Series – (DTS3021A115LG) (DISCONTINUED)
Discontinued Products900-1300 BTU/H Indoor Air Conditioner DTS Series – (DTS3021A115LG) (DISCONTINUED)
Description
- Compact design for side mounting on any enclosure surface where hot spot cooling or low capacity cooling is required.
- Closed loop cooling ensures clean enclosure air is recirculated without ever mixing with contaminated ambient air.
- Air conditioners are shipped separately and installed on site
Standards
- Maintains enclosure’s NEMA 12 rating
- IP 54
- UR, cUR and CE
Features
- R134a refrigerant.
- Thermostat control accessible from inside enclosure.
- Expansion valve increases efficiency with improved evaporator heat transfer and less frequent compressor operation.
- Direct condensate discharge via 1/4″ NPT threaded port.
- Continuous air circulation from high capacity fans.
- EMI/RFI suppression meets CE.
- Door contact for power down when enclosure door is opened.
- Gasket, mounting kit and template for cutout and drilling are included.
- Washable aluminum mesh filter
Accessories
SKU: DTS3021A115LG -
Discontinued Products
Type 12 Mild Steel Two Door Modular Freestanding Enclosure HME Series – (HMET16128) (DISCONTINUED)
Discontinued ProductsType 12 Mild Steel Two Door Modular Freestanding Enclosure HME Series – (HMET16128) (DISCONTINUED)
Application
- The HMET 2 door product line provides users with a rugged housing for industrial control and operator interface in industrial environments.
- Modular design permits joining of units together for large scale and mixed use applications.
- Frame’s 25mm hole pattern provides extensive component and accessory mounting flexibility.
- A broad range of industry standard sizes are offered.
Standards
- UL 508A Type 12
- CSA Type 12
- Complies with
- NEMA Type 12
- IEC 60529 IP54
Configuration
- Frame
- Removable solid top panel
- Lifting eyebolts (4)
- Removable bottom panel w/gland plates
- Two overlapping solid front doors with door frames
- Removable rear cover panels (1 or 2 depending on width) with welded rear center post on units 1000 mm and wider.
- Full width inner mounting panel
Construction
- Formed 14 gauge steel.
- Fully welded frame with 25mm hole pattern for superior mounting flexibility.
- Foam gasket on all openings provides a dust-tight seal.
- Reinforced eyebolts are provided for easy enclosure lifting.
- Frames can be joined together with an optional joining kit.
- Doors can be easily interchanged, removed and/or reversed.
- Door opening 135°.
- Optional formed 14 gauge steel side panels are sold separately (in pairs).
- Bonding and grounding studs are provided for all doors and panels.
Finish
- Phosphatized and finished in RAL 7035 light gray powder coating.
- Inner panel is unpainted galvanized 12 gauge steel.
- SPECIAL TEMPORARY NOTE: Due to industry shortages of large galvanized steel sheets, some larger inner panels will be substituted with painted steel versions.
Accessories
Side Mounting Inner Panels
Side Mounting Barrier Panels
Additional Inner Panels
Bridge Panel
Grid System
Mounting Hardware
HME Handles
Frame Joining Kit
Side Panels
Plinth
Climate Control
Lighting
Additional HME Accessories
General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: mm. Switch units to: inch