Dynamometer
Specifications
Enclosure:Designed
to NEMA4X/IP55. Suitable for continuous outdoor use.
Accuracy:
0.1% of capacity.*
Repeatability:
0.1% of capacity. 1 part in 1000 display mode with Dillon provided
shackles.
Body
Protection: Aluminum capacities are anodized. Alloy steel capacities
are electroless-nickel plated.
Bearings:
Unmatched repeatability attained by needle bearings in shackle
pin holes up to EDx-10K. Shackle pin acts as inner race.
Shackles:
Forged industry standard anchor shackles. Models up to EDx-10K
use precision machined shackle pin. Higher capacities use forged
pin.
Display:
128 x 64 dot-graphic LCD display shows up to 6 digits 1.0" (26
mm) high plus annunciators and softkeys. Digits are .11 inches
(7mm) thick for unmatched readability.
Display
update rate: 2 times per second.
Connector:
Recessed sealed connector may be used for serial communications
or connection to a Communicator remote.
RS-232
/ RS-485 communication: Print or extract data easily. Continuous
output can drive a scoreboard. Configurable poll character.
Calibration:
Traceable to the National Institute of Standards and Technology.
Certificate included with curve of readings. Passes only with
three consecutive confirming runs, with all points in specification.
Battery
life: 320 hours typical use with two C-cell alkaline batteries.
40 hours typical with Radio Link system.
Operating
temperature: -4? F to 140? F (-20? to 60? C) Included with instrument:
Carry case, batteries, manual and certificate of calibration.
EDx-50K and EDx-100K with shackles include shackle crate and spacers.
Options:
Shackles. 2.4 GHz radio board. Display backlight.
