West Coast (866) 342-3721-------East Coast (866) 650-DATA

New Telect Fiber Optic Enclosure-click here

Century RackMount

Century Wallmount Enclosures

Century OutsidePlant Enclosures

Accessories

Part Number ATSFISR-12/Fisr-12

The 1U rack mount fiberoptic splice and termination cabinets from Century provide an economical solution for small installations where direct termination or pigtail splicing is required. These compact, durable, easy to install cabinets offer front and rear access and secure cable management. Typical uses of these cabinets include situations where outside plant cables are terminated onto the back of the connector panel or where pigtails are spliced onto the incoming cable.

• Mounts in 19” and 23” racks
• Flush mount or standard 5.25” projection
• 1 rack-unit high
• Front access to all operations on a swing out shelf
• Accommodates splice trays
• Accepts standard adapter 6-pack panels
• 16 Gauge CRS construction
• Durable powder coat finish in beige or optional black
• Accessory Kit included with
• Cable ties
• Cable management clips
• Labels
• Splice tray mounting kit
• Rack mounting screws
• Installation Instructions
• 1.75” h X 17” w X 15” d
• Also available with pre-terminated stub cables up to 200 feet long
  Description
  The 1U rack mount fiberoptic splice and termination cabinets from Century provide an economical solution for small installations where direct termination or pigtail splicing is required. These compact, durable, easy to install cabinets offer front and rear access and secure cable management. Typical uses of these cabinets include situations where outside plant cables are terminated onto the back of the connector panel or where pigtails are spliced onto the incoming cable.

Part Number ATSFTS-350-S/TMPart Number ATSFTS-350-TM

Description
The FTS-350 rack-mount cabinet accommodates up to 36 direct or spliced terminations. The six-pack panels are available in all common connector styles, either empty or loaded with Century Fiberoptics adapters.

As with all of our cabinets, the FTS-350 is also available with preterminated cable stub or pigtails. Our factory terminations ensure the best possible field performance.

Cable entrance is from the top and back of the cabinet. Cable mounting is easy, fast and secure.

• Mounts in 19” and 23” racks
• Flush mount or standard 5.25” projection
• Splice and terminate up to 36 fibers
• Two rack-unit high
• Removable Top and Rear cover
• Optional locking front door in steel or acrylic
• Front access via slide-out tray
• Accommodates up to three splice trays
• Accepts standard adapter 6-pack panels
• 16 Gauge CRS construction
• Durable powder coat finish in beige or optional black
• Accessory Kit included with
• Cable ties
• Cable management clips
• Labels
• Splice tray mounting kit
• Rack mounting screws
• Installation Instructions
• 3.5” h X 17” w X 12” d
  

Part Number ATSFTS-525-TM
The FTS-525 Series of 3U high rack-mounted fiber splice and termination cabinets from Century Fiberoptics are compact, durable and easy to assemble. Designed for maximum flexibility, the series includes variety of functional options and accessories. The units are easily configured to meet termination, interconnection or crossconnection requirements. The FTS-525 cabinets can be used on frames with either front or back access and will accept cables from the front, rear, top or bottom. Access to the front is through the removable hinged door. A removable back cover provides rear access. An optional lock is available for the front door. The cabinets can be configured for splicing only, termination only, or a combination of both. Flexible design allows mixing of connector types and the installation of only the adapters needed for the current application. Adapter panels accommodate ST, SC, FC, LX.5, LC, E2000, and other adapter types

• Features
  
• 19” and 23” rack mounting
• Stackable
• Top and bottom cable entry
• Accommodates fiber splice trays
• Cable storage plates included
• Fiber Management Kit, including tie wraps, clips, labels and rack-mounting screws
• Accepts standard up to 12 6-pack adapter panels (72 terminations) or up to 6 splice trays (72 fiber splices)
• 16 gauge CRS construction
• Durable powder coat finish in beige or optional black
• 5.25” h X 17” w X 12” d

The FTS-700 Series of 4U high rack-mounted fiber splice and termination cabinets from Century Fiberoptics are slightly larger than the FTS-525 cabinets, with a bit more “working space” in the back for the technician. The extra rack unit also increases the capacity of the cabinet when used in the Splice and Terminate configuration. Designed for maximum flexibility, the series includes variety of functional options and accessories. The units are easily configured to meet termination, interconnection or cross-connection requirements. The FTS-700 cabinets can be used on frames with either front or back access and will accept cables from the front, rear, top or bottom. Access to the front is through the removable hinged door. A removable back cover provides rear access. An optional lock is available for the front door. The cabinets can be configured for splicing only, termination only, or a combination of both. Flexible design allows mixing of connector types and the installation of only the adapters needed for the current application. Adapter panels accommodate ST, SC, FC, LX.5, LC, E2000, and other adapter types.

• 19” and 23” rack mounting
• Stackable
• Top and bottom cable entry
• Accommodates fiber splice trays
• Cable storage plates included
• Fiber Management Kit, including tie wraps, clips, labels and rack-mounting screws
• Accepts standard up to 12 6-pack adapter panels (72 terminations) or up to 6 splice trays (72 fiber splices)
• 16 gauge CRS construction
• Durable powder coat finish in beige or optional black
• 7” h X 17” w X 12” d
  

The FTS-105 Series of 5U high rack-mounted fiber splice and termination cabinets from Century Fiberoptics are our largest rackmount units. They offer high capacity with the same ease of use as our smaller units. Designed for maximum flexibility, the series includes variety of functional options and accessories. The units are easily configured to meet termination, interconnection or cross-connection requirements. The FTS-105 cabinets can be used on frames with either front or back access and will accept cables from the front, rear, top or bottom. Access to the front is through the removable hinged door. A removable back cover provides rear access. An optional lock is available for the front door. The cabinets can be configured for splicing only, termination only, or a combination of both. Flexible design allows mixing of connector types and the installation of only the adapters needed for the current application. Adapter panels accommodate ST, SC, FC, LX.5, LC, E2000, and other adapter types.

Features

or visit this link for sample pricing Click Here For Fiber Optic Assembly Pricing

home | cables | switches | Contact Us our team | locations