CEN wall-mount cabinets, Hyperline, Cat 5E cable, Cat 6 cable,Ideal Industries, Ideal Industries Cutters, Coax/Twisted Pair Cutters, Twisted Pair Cutters, Coax Cutters, Fiber Cutters Fiber Optic Test Equipment, Ideal Industries

Ideal Product Categories

About Us

cable, vdsl, patch

Hyperline- Ideal Industries Cutters - Coax/Twisted Pair Cutters - Twisted Pair Cutters - Coax Cutters - Fiber Cutters Fiber Optic Test Equipment- Ideal Industries

American Tech Supply is now an authorized Hyperline distributor

From copper to fiber, the Hyperline system of products includes everything you need for installation, termination, testing and troubleshooting. And our level of technical expertise, training and customer support ensures that your total cost of ownership is kept to a minimum.

Telecommunication Cabinets and Racks, Outdoor Cabinets, Industrial Enclosures, Control Desks, pages 1-212,18.8 MB

CEN wall-mount cabinets

Description

- Compact, wall-mount cabinets are designed for installation of electrical equipment which requires protection from unauthorized access and environmental impact: dust, moisture, etc.
- Standard version is designed for indoor applications.
- Wall-mount cabinets are manufactured in 20 dimensions in accordance with the chart below.
Cabinets of nonstandard dimensions or stainless steel options are available upon request.

Construction

Body

Door

Mounting panel

Blanking plate with cable entry

Elements for cabinet mounting

Technical data

Type of element Material sheet steel Surface finish

Body 1.25 mm (0.05”) or 1.5 mm
(0.06”) depending on cabinet’s dimensions Epoxide-polyester thick-texture powder paint
in RAL 7035, intended for indoor usage

Door

Blanking plate 1.5 mm (0.06”)

Mounting plate 2 mm (0.08”) Al-Zn coated

Description of CEN construction

The CEN body is made of a tight-welded, sheet metal construction
The wide-opening door allows for maximal space utilization
Multi-folded enclosure aperture protects against dust and moisture, even when the door is open
In the bottom of the body there is an opening for a gland plate. Dimension of the opening depends on the dimensions of the cabinet
On the inside of the rear panel there are self-tapping screws for fixing the mounting plate
On the rear panel there are cut-outs for mounting the cabinet directly on the wall or using lifting brackets

Door

All CEN cabinets have single-wing doors
Depending on height, either one or two locks with double-bit insert are used:
    cabinets up to 15.7” (400 mm) high – one lock in the middle,
    cabinets from 19.7” (500 mm) to 39.4” (1000 mm) high – two locks
The door is fitted with hinges, the number of hinges depends upon the cabinet height:
    from 11.8” (300 mm) to 23.6” (600 mm) – two hinges,
    from 31.5” (800 mm) to 39.4” (1000 mm) – three hinges
Interior of the door includes sealing gasket and grounding studs
Ability to easily change the door-opening direction
Maximum door opening angle 120°

Mounting plate

Fitted to the rear panel
In cabinets up to 23.6” (600 mm) high the flat mounting plate is used
In cabinets 31.5” (800 mm) or 39.4” (1000 mm) high the folded mounting plate is used to maintain stiffness
Mounting plate includes fixing points for grounding bar

Blanking plate-cable entry plate

Fitted to cut-out in the bottom plate by self-tapping screws
Includes sealing gasket and grounding stud
Gland cable entries available on request

Grounding and potential equalization

The door and the blanking plate include grounding studs
Grounding bar, potential equalization bar (for fixing to the mounting plate), and grounding cables are available as supplementary accessories

Protection degree

IP 65 in accordance with PN-92/E-08106/EN 60 529/IEC 529

Reference chart

Width W, mm (in) Depth D, mm (in) Height, mm (in)

300 (11.8”) 400 (15.7”) 500 (19.7”) 600 (23.6”) 800 (31.5”) 1000 (39.4”)

Catalog numbers of standard CEN cabinets

200 (7.9) 115 (4.5) CEN-1 - - - - -

300 (11.8) 150 (5.9) CEN-2 - - - - -

210 (8.3) - CEN-3 - - - -

400 (15.7) 150 (5.9) - - - - - -

210 (8.3) CEN-4 CEN-5 CEN-6 - - -

250 (9.8) - - - CEN-7 - -

300 (11.8) - CEN-8 CEN-9 - - -

500 (19.7) 210 (8.3) - - CEN-10 - - -

250 (9.8) - CEN-11 - CEN-12 - -

300 (11.8) - - - CEN-13 - -

600 (23.6) 250 (9.8) - CEN-14 - CEN-15 CEN-16 CEN-17

300 (11.8) - - - - CEN-18 -

800 (31.5) 300 (11.8) - - - - CEN-19 CEN-20

Ordering

CEN-1 Electrical cabinet 300x200x115 mm (11.8"x7.9"x4.5") with mounting panel

CEN-2 Electrical cabinet 300x300x150 mm (11.8"x11.8"x5.9") with mounting panel

CEN-3 Electrical cabinet 400x300x210 mm (15.7"x11.8"x8.3") with mounting panel

CEN-4 Electrical cabinet 300x400x210 mm (11.8"x15.7"x8.3") with mounting panel

CEN-5 Electrical cabinet 400x400x210 mm (15.7"x15.7"x8.3") with mounting panel

CEN-6 Electrical cabinet 500x400x210 mm (19.7"x15.7"x8.3") with mounting panel

CEN-7 Electrical cabinet 600x400x250 mm (23.6"x15.7"x9.8") with mounting panel

CEN-8 Electrical cabinet 400x400x300 mm (15.7"x15.7"x11.8") with mounting panel

CEN-9 Electrical cabinet 500x400x300 mm (19.7"x15.7"x11.8") with mounting panel

CEN-10 Electrical cabinet 500x500x210 mm (19.7"x19.7"x8.3") with mounting panel

CEN-11 Electrical cabinet 400x500x250 mm (15.7"x19.7"x9.8") with mounting panel

CEN-12 Electrical cabinet 600x500x250 mm (23.6"x19.7"x9.8") with mounting panel

CEN-13 Electrical cabinet 600x500x300 mm (23.6"x19.7"x11.8") with mounting panel

CEN-14 Electrical cabinet 400x600x250 mm (15.7"x23.6"x9.8") with mounting panel

CEN-15 Electrical cabinet 600x600x250 mm (23.6"x23.6"x9.8") with mounting panel

CEN-16 Electrical cabinet 800x600x250 mm (31.5"x23.6"x9.8") with mounting panel

CEN-17 Electrical cabinet 1000x600x250 mm (39.4"x23.6"x9.8") with mounting panel

CEN-18 Electrical cabinet 800x600x300 mm (31.5"x23.6"x11.8") with mounting panel

CEN-19 Electrical cabinet 800x800x300 mm (31.5"x31.5"x11.8") with mounting panel

CEN-20 Electrical cabinet 1000x800x300 mm (39.4"x31.5"x11.8") with mounting panel